Different messages on COMMIT_FORM ,when form is opened from another form

hi,
problem is when open form from another form. After change some data and execute COMMIT_FORM, message is : No changes to apply.
Interesting is that when exit and open form again, changes is SAVED !?.
If open that form directly, message is that like should be ( Transaction completed...).
Has anyone idea where is problem?

Hello,
While calling the form try with 'DO_REPLACE' option.
Thank U.

Similar Messages

Pdf form for data from another form with data, xml or pdf, tables not expanding

Sir,
I am using Adobe Acrobat 9 Pro and LifeCylce to do these forms. I have made several subforms for a Risk Assessment for the mission they fly. I have also made up another form with tables that would connect with each subform data. This form also will give me and others a % of the values received from the data to help us with seeing problem area towards Safety.
I am able to connect the data to the form from the Risk Forms but when I go and add another group of data it over writes the data that was already in the data collection form. The tables are dynamic and able to expand with the generated data but when I compile several Risk Forms, xml. data into one single data group, the receiving tables will not except this data. To compile the data I am in Acrobat and using the form-manage form data-merge data to spreadsheet than enter as a report that is xml. Still not working. I also tried to save the form, with data already in the tables, and then opened it again and add data to it, it will over write the existing data in the form. This form does work great with the generated data in LiveCycle.
Any suggestions???

Thanks Paul
Did as you said and for each subform binding tab made sure I have "Repeat subform for each data item" checkbox and still no change when I add the data.
I even tried to combine the xml data and that file just has the main page and not the data pages. just another problem that is happening.
Any other suggestions on this expanding tables and receive single forms one at a time.
Bill

Close form that has opened from another form

Hi,
I have used custom.pll so that when a specific action is performed on Form0 instead of opening Form1 to open Form2 instead.
if (event_name = 'WHEN-CREATE-RECORD') THEN
if (form_name = 'ARXCUDCI' AND BLOCK_NAME = 'ORG_NS_FIND_FOLDER') then
call_form(fnd_navigate.formpath('XXE', 'FORM2'),NO_HIDE,DO_REPLACE);
END IF;
END IF;
The problem is that when Form2 is closed, Form1 is displayed.
Are there any suggestions on how to prevent Form1 to be diplayed using custom code on custom.pll or on Form2 but not Form0 or Form1?

This forum is for general Oracle Forms questions. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig

Error message [3569-3] when copying landed costs from another landed costs

I tried to correct already existing landed cost by creating another landed costs and copy from the original one.
When add the document I have got the Error message [3569-3] and I am not able to find where the problem is.
Please help.
Thanks

Dear Gordon,
sorry for the pictures in local language. This question has been created during my holiday and I had no chance to log in my customer environment so I modified the documentation from my original file.
Nevertheless I thing that I discovered the problem: The correction by using u201Ccopy from landed costsu201Dcannot be full (I mean not 1:1 with the original one).
I made reasonable changes then everything worked properly.
Thanks for your help.
Regards
Jaroslav

File upload hanging when called from another form

Hi
I have created a file upload form from the documentation I found on metalink and the form works fine on its own. I have then implemented the form into a multi form application and when the file upload form is called from another form it hangs trying to get to the client drive so that it can pick up a file. I have tried using the 'call_form', 'open_form' and 'new_form' built-ins but the results were all the same. Can anybody help me?
Maria

Hello,
This is not the support, so there are no post more urgent than other.
Francois

Frm-92101 happens when I open a form from another form and close it.

Frm-92101 happens when I open a form from another form, check something, show a message to the user and exit the form to the previous form.
Forms version: 10.1.2.0.2. Java: 1.6.0_23. Browser: IE6
When I put before the "EXIT_FORM" two messages, everything is fine and the second form is closed and I repeat to the first form just as I wanted.
In forms 9.0 it didn't happen.
Does it have a connection with the fact I use JRE instead of JInitiator?
Thank you.

>
There are numerous causes of the FRM-92101 error. I recommend you start your investigation by tracing your Forms session so you can see what your form is doing when the error occurs. Check out My Oracle Support document How to Use Forms Trace with Forms [ID 209372.1] for information on how to enable the trace. Also, take a look at My Oracle Support document Known Causes of FRM-92101 Error In Forms [ID 604633.1].
Hope this helps,
Craig
>
I have just found that there is a "Synchronize" command in one of the main attached libraries, and when I comment that command the application works well. But I don't want to comment it because it's a great library and I assume it has a part in the system.
I have discovered that in the new Forms' help, the fact that the System.Current_Item mustn't be null so the command "Synchronize" will work, is mentioned. In the old Forms' help, that fact is not mentioned.
So I tried to put it inside a condition that checks if the current item is not null, but the compiler doesn't recognize the "current_item". I don't know why. Because it's a library? So how can I check this? I can sent it as a parameter, but I don't want. Do you know something about it? Thank you.

Regarding UCF_AcroForm error displayed when trying to open the pdf form

Hi,
Iam receiving the pop up when trying to open the pdf form.The Error is Server Error Class: UCF_AcroForm Method: Error.The Error displayed in some system and in some other system the form is working fine.The Form is created using the Designer 8.0.The form is working fine in reader 8.0.Is there any problem in the reader version.Is there any solution for this problem please provide.
Thanks and Regards,
SatheshKumar R

Sathesh,
Similar issue has been reported at SDN so searching would have helped you. See below threads for solutions:-
UCF_AcroForm error
MSS UCF_AcroForm error displayed when trying to display form in PCR
Chintan

Error when exit by 'X' from called form

I am in a form and I call another form. I delete something on the called form then click the 'X' in the right hand corner of the form without saving my change first - a message is displayed QMS-00158: Do you want to save your changes? When I click on 'Yes' a window appears with a title that says 'Errors and Warnings in this transaction' with no other information - when I select 'OK' the window remains displayed and a message at the bottom of the screen says "FRM-40738 Argument 1 to builtin GO_BLOCK cannot be null" - the only way to close the window is to click on the called form and exit it then everything is OK.
If I save my changes first everything is fine - it is only when I try to exit the called form before saving that this happens.
Any ideas of why?

Hi Pradeep,
I am facing the same issue, Can you please give me some inputs on this..
Thanks in Advance.
Thanks,
Amita

"Error check activation" is the message I get when pulling a book from the library. My computer is authorized (per the ADE screen) I have tried un-authorrzing and re-authorizing but nothing works. Please help

"Error check activation" is the message I get when pulling a book from the library. My computer is authorized (per the ADE screen) I have tried un-authorrzing and re-authorizing but nothing works. Please help

I am having the same problem, and my computer is authorized through my Adobe ID and I cannot open any books. I tried downloading a book from the university library, using my ID, the book is in ACSM format, and I cannot open the book because it keeps telling me
"error check activation" I am including screen shots to show my computer is authorized.

"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email

"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email
I am absolutely pulling out my hair over this one!!
PC/Win 7 64bit/Adobe XI/Office 2010
I have tried Uninstalling and re-installing
I have tried using an adobe software removal tool
I have tried modifying the security settings in reader
I've tried running repair on MS Office
If you open the .pdf from an email directly, it opens Reader with the error "Internal Error Occurred"
If you drag and drop the .pdf onto the desktop, and then open it, it opens.
If you open Adobe Reader FIRST, then open the .pdf from the email, it opens fine.
ONLY when you open a .pdf from an email with Adobe Reader closed (so Outlook is asking AR to open first, and then present the .pdf) is it behaving this way.
Hypothesis: Outlook 2010 does not like to open Adobe Reader.
SO....tell me all of you brilliant geniuses? How do I solve this puzzle and become an end user's hero?
PS: WorkAround - the only work around I have found for this at present, is that the user first opens up Adobe Reader and lets it run in the background. I pinned the shortcut to his task bar to remind him.

I have uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our current fix until a solution is found for the above error

Refer an Open Forms, Items Contents from another Open Form

Hi All,
I need help on the following Questions.
Q1. How can I find the Contents of an Item in a Form from another Form in the Same session.
Q2. How can we save contents of a Called form when the Calling form is in Changed Status. (using When Validate Trigger on the Calling Form). (Key-Next does not work in this context 'coz if a user clicks with a mouse or uses shortcut keys this trigger is not fired).
Thanks in adv. for the reply.
Regards
ravi

Is this so impossible?

Open the form from another form...

How can I open the form from another form with the PL/SQL code???
The my form are create from OracleDesigner and developed with OracleBuilder.
Regards
Basilisco Giorgio

You can read "About calling reports, displays, and other forms from generated forms" topic in the Designer on-line help. By the way in Forms there are CALL_FORM,OPEN_FORM and NEW_FORM built-ins.
Helena

How do you mark a message as spam when your mail comes from gmail via OS X Mail.app?

How do you mark a message as spam when your mail comes from gmail via OS X Mail.app?
I use IMAP to get Gmail. I seem to remember seeing a "[Gmail]/Spam" IMAP folder in previous versions of the app, but that's not visible any more.
Without this, I have to log on to the web-based Gmail to mark messages as spam, that's a productivity killer.

right mouse click on a message and select Mark as Junk Mail

Query a second form from another form by passing value

Hi,
I have two forms. I am trying to query a second form from another form. I have managed to display the query results in the second form by passing value from the first form. I did it according to the details in the Oracle 9ias Portal Technical FAQ html file.
It works fine when there is already a row in the first form. When I insert a new row in the first form and query the second form which has key from the first form, there is no matching rows displayed which is correct but detail action mode is 'NONE' for all detail rows.
According to the FAQ, it says the following:-
"When the called form is started, it executes a query with the supplied condition (in this case, "where deptno=10"). If the query is successful, the matching rows are displayed in Update mode. If no matching rows are found, the form starts in Insert mode."
It does not happen for me. I get NONE mode for no matching rows. Is this a BUG ? I am working on Portal version 3.0.9.8.0.
Is there something wrong in the code I wrote ? I would like to have all the detail mode as Insert.
Here is the following code I wrote on SUCCESSFUL SUBMISSION OF THE FORM.
declare
my_url varchar2(1000);
v_deptno number;
begin
v_deptno := p_session.get_value_as_NUMBER(p_block_name => 'DEFAULT', p_attribute_name => 'A_DEPTNO');
my_url := 'PORTAL30.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=1268491962&p_arg_names=_show_header&p_arg_values=YES&p_arg_names=deptno&p_arg_values='||LTRIM(TO_CHAR(v_deptno))||'&p_arg_names=_deptno_cond&p_arg_values=%3D';
go(my_url);
end;

Hi,
The behaviour is OK as in the MD form there are two states "Save" and "Query and Save" and when the form is in "Query and Save" mode that means you can use it for both Query aswell as Save which is decided by your "Master action" if that is None it is used for Query , for Insert you will have to select Insert ,this is the Insert Mode behavior.
If you open a new MD form that is also in the "Query and Save" the same behaviour will be there.
Hope this answers your query.
rahul

Control access of a form from another form.

hi all,
Please help me .
This is a system which contains a lot of forms (more than 100) . The system administrator can specify whether a user can insert, update,delete or query for each form (this varies for each user). So, when a user logs in and calls a form i have to enable / disable the insert, update,delete or query according to the user who has logged in and the privileges the system administrator has given for that form.
i used the call_form method with query_only mode and no_query_only(normal mode) option . The normal mode allows insert,update,delete and query together but i want the user to insert into database without querying any of the records.
So, in short , i would like to know if i can enable/disable insert,update,delete & query of a called form(Form B) from calling form (Form A) without having to modify (Form B) and without issuing any grant statements in the database side ? Is there any option like the one in the call form method?
Thanking you in advance.

Thank you very much for the response.
yes, set form property and set block property can be used when i want to enable / disable insert in the current form. But, what if i want to control enable/disable insert from another form (the main form) ????
Can i pass parameters ? without making any change in the current form.

Different messages on COMMIT_FORM ,when form is opened from another form

Similar Messages

Maybe you are looking for