Different power requirements between 3G and newer iPods?

Can anyone inform me as to whether there is any input power
requirement difference between the 3G and newer "dock connector" iPods? I'm wondering why Griffin Tech sells a PowerPod car power cord for the 3G and earlier dock models and a PowerJolt for the 4G and 5G dock models and Shuffle. If there is no power difference, I'd like to buy the PowerJolt, and use it for both my 3G dock model and my Shuffle, without buying 2 different car power adapters. Any light that can be
shed on this subject would be greatly appreciated.
iMac Mac OS X (10.2.x) iPod 3G and 1G shuffle

I answered my own question. I found my 3 year old owner's manual and found the page where it noted that the iPod will NOT charge the battery when connected via USB to dock cable. Concluding that I probably would not damage my iPod, I tried connecting the PowerJolt, and, as suspected, the iPod does NOT charge. The Griffin Tech solution for vehicle power for the 3G iPod REQUIRES PowerPod.
iMac Mac OS X (10.2.x) iPod 3G and 1Gb shuffle

Similar Messages

Transfer between osx and new ipod

Hi. How can I transfer my music from my old itunes 9.2.1 and OSX system to my new ipod 5th gen? I don't want to upgrade the software as I don't use the computer any more. thanks.

You cannot.

Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.

Yes
Put all the music on one computer, make sure it is authorized for all accounts, sync.

White spaces are required between publicId and systemId

Hello,
I'm new to Java/XML and have been searching the XML forums for a viable answer trying to get around this error
"White spaces are required between publicId and systemId"
I'm a little unsure of this, however my understanding of this error is that "whitespace" must exist between my "tag entities". So I have modified my XML document to include white space between entities...below is a snippet of my XML doc
// Begin snippet...
<auth>
<userid>
12345
</userid>
<first>
first value
</first>
<second>
</second>
</auth>
//End snippetBelow is the fragment of code I use to set up and parse the XML parse
      SAXParserFactory spf = SAXParserFactory.newInstance();
      //spf.setNamespaceAware(true);
      SAXParser saxParser = spf.newSAXParser();
      XMLReader parser = saxParser.getXMLReader();
      urlConnection = url.openConnection();
      in = urlConnection.getInputStream();
      ins = new InputSource( in );
      // create a handler
      Handler handler = new Handler();
      handler.setBVSessionData( bvdata );
      // assign the handler to the parser
      parser.setContentHandler(handler);
      parser.parse( ins ); // SAXException is thrown here...what gives??
//...In addition, I'm able to read the XML file fine if I point the URL to the XML file locally on my PC, however when the XML doc is served by a web server over HTTP, then read by my app, the SAXException is thrown. Any insight or examples is greatly appreciated. Thanks in advance.

In case anybody is interested here is what I've been able to find...thanks to a little helpful book "XML and Java 2nd Edition" [Maruyama, Tamra, Uramoto, Murata, Clark]
Since I'm using a SAX parser the example doesn't really help. However the book references a DOM parser and uses a "getIsIgnorableWhitespace()" method which as my luck may have it is not available in SAX...
The book goes on to state there are two ways to tell an XML processor or an application if certain whitespace is significant:
1) "Define the significant whitespace in the content models in the DTD"
2) "Specify the xml:space="preserve" attribute in an XML document in order to indicate the intent that applications preservce all whitespace"
Can anybody elaborate on the above, especially #1 or even provide an example that would work with SAX. Thanks...

Is there anyway the latest firmware could have enabled my restriction passcode as I have never enabled it myself this has happened to my ipad2 and new iPod 4 g

Is there anyway the latest firmware could have enabled my restriction pass code this has happened to my ipad2 and new iPod 4g,I have not set these codes but I ALLWAYS use the same 4digit numbers and when I enter these I tells me I have made 4 attempts,what is the correct way to resolve this,does it mean a reset or restore,wonder if this has been a problem with other users as I mentioned I have never set these codes because I have no need to as I am the only user on my iPad and iPod.

I have seen other users report this very same issue after an update. Unfortunately, if you don't have the passcode to unlock restrictions, you have to restore the device as new in order to gain access again. If you restore from a backup - the passcode will still be in that backup and you will end up right where you started.
But in your case, you were not using a passcode, so I am hoping that you have a backup that predates the backup from when you updated the device. If you have multiple backups, you can restore from an older backup that should not contain that passcode and then you should be OK.
Do you backup with iTunes? If you do - go to Edit>Preferences>Devices and see if there is any older backup in that window - other than the one from when you updated the iPad iOS.
Have you restarted or reset the iPad since you updated? It's worth a shot to try. I don't think it will change this situation, but they are both easy and harmless to do.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

JDeveloper Error: White spaces are required between publicId and systemId.

I'm using JDeveloper 10.1.3.1.0.
This error is occurring in a BPEL process project.
With one particular web service I have, adding a Partner Link to the BPEL generates the following compile error:
Error: White spaces are required between publicId and systemId.
I can add Partner links from other web services and the BPEL will compile fine. The main difference I can see is that this web service supports WS-Addressing.
I have found one other reference to a similar (but not exactly the same) problem elsewhere in these forums but the fix is not really applicable. All of the wsdl files pass the "Validate WSDL" operation, and I don't see anything wrong with them.
When the error occurs and I select "Go To Source" it points back to the first line of the bpel file.
Can anyone help me out on this?
This is the wsdl for the web service, wsademo.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:MIME="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:DIME="http://schemas.xmlsoap.org/ws/2002/04/dime/wsdl/"
xmlns:WSDL="http://schemas.xmlsoap.org/wsdl/"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<schema targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope"
xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"
xmlns:ns="http://localhost:11001/wsademo.wsdl"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="unqualified"
attributeFormDefault="unqualified">
<import namespace="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<import namespace="http://www.w3.org/2003/05/soap-encoding"/>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademo">
<complexType>
<sequence>
<element name="in" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>

<element name="wsademoResult">
<complexType>
<sequence>
<element name="out" type="xsd:string" minOccurs="0" maxOccurs="1" nillable="true"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademo">
<part name="parameters" element="ns:wsademo"/>
</message>
<message name="wsademoResult">
<part name="parameters" element="ns:wsademoResult"/>
</message>
<message name="wsademoHeader">
<part name="MessageID" element="wsa:MessageID"/>
<part name="RelatesTo" element="wsa:RelatesTo"/>
<part name="From" element="wsa:From"/>
<part name="ReplyTo" element="wsa:ReplyTo"/>
<part name="FaultTo" element="wsa:FaultTo"/>
<part name="To" element="wsa:To"/>
<part name="Action" element="wsa:Action"/>
</message>
<portType name="wsademoPort">
<operation name="wsademoResult">
<documentation>accepts a string value from a relayed response</documentation>
<input message="tns:wsademoResult"/>
</operation>
<operation name="wsademo">
<documentation>echos a string value and relays the response to the wsa replyTo address (if present)</documentation>
<input message="tns:wsademo"/>
<output message="tns:wsademoResult"/>
</operation>
</portType>
<binding name="wsademo" type="tns:wsademoPort">
<SOAP:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="wsademoResult">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademoResult"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
</operation>
<operation name="wsademo">
<SOAP:operation soapAction="urn:wsademo/wsademoPort/wsademo"/>
<input>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</input>
<output>
<SOAP:body parts="parameters" use="literal"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="Action"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="To"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="FaultTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="ReplyTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="From"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="RelatesTo"/>
<SOAP:header use="literal" message="tns:wsademoHeader" part="MessageID"/>
</output>
</operation>
</binding>
<service name="wsademo">
<documentation>demonstrates WS-Addressing capabilities</documentation>
<port name="wsademo" binding="tns:wsademo">
<SOAP:address location="http://localhost:11001"/>
</port>
</service>
</definitions>
This is the wsdl that is generated by JDeveloper that contains the PartnerLinks and refernce back to the original wsdl file, wsademoRef.wsdl:
<definitions
name="wsademo"
targetNamespace="http://localhost:11001/wsademo.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://localhost:11001/wsademo.wsdl"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>
<import namespace="http://localhost:11001/wsademo.wsdl" location="wsademo.wsdl"/>
<plnk:partnerLinkType name="wsademoPort_PL">
<plnk:role name="wsademoPort_Role">
<plnk:portType name="tns:wsademoPort"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
And finally the is the BPEL, WSAtest3.bpel:
<?xml version="1.0" encoding="UTF-8"?>

<process name="WsaTest3" targetNamespace="http://xmlns.oracle.com/WsaTest3"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://localhost:11001/wsademo.wsdl"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns2="http://localhost:80/Service.wsdl"
xmlns:client="http://xmlns.oracle.com/WsaTest3"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">

<partnerLinks>

<partnerLink name="client" partnerLinkType="client:WsaTest3"
myRole="WsaTest3Provider"/>
<partnerLink name="wsademo" partnerLinkType="ns1:wsademoPort_PL"
myRole="wsademoPort_Role" partnerRole="wsademoPort_Role"/>
</partnerLinks>

<variables>

<variable name="inputVariable" messageType="client:WsaTest3RequestMessage"/>

<variable name="outputVariable"
messageType="client:WsaTest3ResponseMessage"/>
<variable name="Invoke_1_wsademo_InputVariable" messageType="ns1:wsademo"/>
<variable name="Invoke_1_wsademo_OutputVariable"
messageType="ns1:wsademoResult"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="inputVariable" createInstance="yes"/>

<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"
query="/client:WsaTest3ProcessRequest/client:input"/>
<to variable="Invoke_1_wsademo_InputVariable" part="parameters"/>
</copy>
</assign>
<invoke name="Invoke_1" partnerLink="wsademo" portType="ns1:wsademoPort"
operation="wsademo" inputVariable="Invoke_1_wsademo_InputVariable"
outputVariable="Invoke_1_wsademo_OutputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="Invoke_1_wsademo_OutputVariable" part="parameters"/>
<to variable="outputVariable" part="payload"
query="/client:WsaTest3ProcessResponse/client:result"/>
</copy>
</assign>
<reply name="replyOutput" partnerLink="client" portType="client:WsaTest3"
operation="process" variable="outputVariable"/>
</sequence>
</process>
-Wayne Stielau
Open Text Corporation
Irvine, CA

I have discovered two issues.
1. JDeveloper does not seem to like the SOAP 1.2 envelope and encoding namespaces. Is this a known limitation? Changed them to 1.1.
2. JDeveloper does not like the double definition of wsaDemoResult.
When these two items are changed, the bpel compiles clean. Now I've got to get the message header to populate correctly. There are no values assigned, only namespace definitions. This is the SOAP packet that is received at the web service.
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Header>
<MessageID xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<From xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<RelatesTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<Action xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<ReplyTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<To xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
<FaultTo xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing"/>
</env:Header>
<env:Body>
<wsademo xmlns="http://localhost:11001/wsademo.wsdl">
<in xmlns="">hello</in>
</wsademo>
</env:Body>
</env:Envelope>

Major differences between GL and New GL concepts

Hai,
Please let me know the major differences between old and new gl concepts and if possible explain with few examples....
Thanks in advance.....
Regards
Moderator: Please, read and respect SDN rules

Hi
Refer to the link below-
http://www.sap.com/solutions/business-suite/erp/financials/pdf/BWP_New_Gen_Ledger_Acct_Functions.pdf
Regards
Milind

IBook Shipping between Christmas and New Years?

Anyone from Apple know whether books are being processed and shipped between Christmas and New Years?
I am wondering if anyone has an accurate answer as to why shipping time takes longer then normal if an iBook order was put in on December 23rd (3:00am Pacific). I made the order exspecting the shipment to arrive by atleast the 30th with express shipping. If i had ordered on December 22nd, the site said it would arrive by December 29th, and assumed that if ordered a day later it would arrive a day later. The message I received when purchased said it would only be delivered Jan 4-6 which is much more than anticipated. Of course it's the holidays, but this doesn't make sense to me even with omiting the 26th as a holiday. That, and it is the end of the holidays so I would think most books have already been made and shipped? I am leaving overseas on the 31st and wanted to have these books to give to relatives! I ordered them and am just hoping they come in on time.
Anyone from Apple know whether books are being processed and shipped between Christmas and New Years?
By the way, since the 23rd, it said the books were Preparing for Shippment.
Thanks!
Chris

Apple does certainly know
Unfortuantly you you are posting in a strictly user to user forum so no one here has any idea at all
Anly Apple can answer - Sorry
LN

Is there any differences between black and white ipod touch ?? only the color or there are hardware differences?

is there any differences between black and white ipod touch ?? only the color or there are hardware differences?

You're welcome.
What?
Sorry, but no. The parts are identical with the only difference being a white housing or a black housing.

Bought a new computer, and new ipod 160 GB. I went to sync all my music and it's telling me that the computer isn't authorized. I authorize it and it still won't let me syn these songs

Bought a new computer, and new ipod 160 GB. I went to sync all my music and it's telling me that the computer isn't authorized. I authorize it, by going to store and authorize this computer, and it still won't let me sync these songs

Think you got to reboot or relaunch iTunes after the Authorization.
but here is the Apple support Article on Authorization and sync to iPod
http://support.apple.com/kb/TS1420
http://support.apple.com/kb/HT1420
Good luck!

My old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod

my old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod

Try these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

ITunes 7 and new iPod not playing video

OK here's my other problem:
I have a new iPod, and have downloaded iTunes 7 and Tiger.
I've downloaded a video from iTunes (Michael Jackson's Thriler).
But when I double click on it in 'purchased', it won't play. Nothing happens, no icon, nothing.
Then when I restarted I got a message after iPod syncing that said 'Thriller' not transferred because iPod cannot play it'.
Any idea why?! I thought that's what I paid for...!

I am having a similar problem. I downloaded a song from iTunes a few minutes ago, but when I went to listen it, only part of the song plays. The song is abut 2:50 in length, but skips to another song in the playlist at about 1:30. It seems to pick the song it skips to rather randomly, fwiw!
Can I try downloading the song again, or will iTunes charge me for it a second time?
iMac
OS 10.7.2

WDS between old and new AEBS

First I want to apologize for this lenghty post. I want to provide as much useful info as possible. We just bought the new AEBS Dual Band and tried to add it to our existing WDS network and ran into a few serious snags. I really hope we can find help here. I've already spent many hours pouring through this forum and other sites and can't find any answer. Here's what our existing network look like:
Gigabit AEBS N as WDS Main > 2 "G" AXs as WDS Remotes
Wireless clients include: Tivo (G), MacBook (N), 2 iPhones (G), iBook G3 (B).
Wired clients include: Tivo HD, PowerMac G5, Mac mini, laser printer
What we were trying to accomplish is to make the new Dual Band AEBS as the new WDS Main and create 2 (connected) WiFi networks via WDS:
N network (5GHz) > Dual Band AEBS as WDS Main > Gigabit AEBS N as WDS Remote
G Network (2.4GHz) > 2 "G" AX as WDS Remotes
We want to do this so the Gigabit AEBS N can live in our living room and allow the Tivo to have decent speed when we download the shows to the Macs or to transfer between the Tivos. Since the Dual Band is advertised as being able to broadcast on both frequencies simultaneously, we're assuming it can do this. However, I can't find any info online or otherwise that either confirms or disputes this function.
When I tried to set it up as such, the 2 AXs work as expected. But the Gigabit AEBS N becomes non-responsive. I even tried to hard reset it and re-attach it to the network using 2.4GHz to no avail. At this point, the Gigabit AEBS N either gives the -5 error or, after hard reset, fail to acknowledge the WAN port when I tried to do a "basic" setup to test it.
My first question is: Does the Dual Band AEBS support my desired configuration at all? That is, create separate WDS networks on the 2 frequencies (5GHz vs 2.4). No one I've spoken to at Apple has a clear answer. So I wonder if anyone who reads these forums has tried this.
My second question is: does the 7.4.1 firmware hose the WAN port of the Gigabit AEBS N? I've downgraded it back to 7.3.2 and the WAN port is still not recognized. The AEBS was working 100% before the swap (and the firmware update that followed).
My last question is: Has anyone experienced "stuttering" on the Dual Band AEBS? I haven't noticed it until I tried to playback some QuickTime files off the Airport Disk attached to the Dual Band. On the Gigabit AEBS N, the files all play smooth without any dropped frames (even during substantial network activities). On the Dual Band, frames were dropping every few seconds (even during an otherwise idle network load). When I look at the Airport menu (holding down Option), the Transmit Rate fluctuates between 300 and 1 every few seconds.
Does this mean I now have 2 defective AEBS? Can someone shed some light on this? We would really appreciate any help.
PS: When I take a peek in the "Wireless Clients" pane in Airport Util under the Dual Band, the Rate for the 2 AXs are hovering between 1 and 5. Does this sound right?

I am in a similar situation. I purchased a new dual-band Extreme to replace the older G spaceship with the intent of extending both bands with 2 Expresses, one a new N and other an older G. I extended the N band successfully with the N Express, but when I tried to configure the older G Express I couldn't get the dual band to recognize it when WDS was selected. When I choose "join the existing network" the dual band connected to it, but of course this didn't extend the range.
My first call to Apple Support indicated that I could only extend one or the other with an Express, and that I would have to buy a second dual band Extreme if I wanted to extend the range of both bands at the same time. I took this to mean that I would set up the 2nd unit would act as a dual remote to "extend the network." I returned the new N Express and got a second dual band Extreme, but before I opened it up I checked with another Apple "product specialist", who then told me that I could NOT use the 2nd dual band Extreme to extend both bands at the same time.....only one or the other. According to this guy I would need to hook both routers up together with an ethernet cable, then I could extend each network separately with the Expresses.
There has to be a better way to accomplish this.

How do I get my music from my old ipod to my computer and new ipod?

I recently got a new ipod and synced it to my itunes account. The problem is that all the music that was not puchsed from itunes was not downloaded to my itunes account or my new ipod. All of the music that was not from itunes is only on my old ipod. How do I put the music from my old ipod onto my computer? (My computer is a pc not a mac)

You need a third-party porgram like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities

IPod touch battery and new ipod touch repairing decision

Hi,
I have an iPod touch 4th generation(8gb)that I have had for about 2 years. A few months ago I noticed something wrong with it. Whenever I kept the battery fully charged it decided to shut off by it's self even when it acted fully charged. Now I'm trying to decided if I can actually get a professional to repair the battery for it or if it's best to get a new iPod touch. Otherwise I don't know what else I can do. My warranty expired so I'm thinking getting a new battery will not be free either way. I don't think there's water damage unless if there is I don't know where to look on the iPod. Need help to figure out what I should do about the battery because the buttons and screen is fine I think it's just the battery that is the problem. Although I did hear about the next ios7 or something, but I wouldn't think that would have anything to do with this. I've asked a worker in an iPhone repair shop place about this problem and they agreed it has to do with the battery. No matter how many times I have kept it charged fully or started charging it won't stay on unless it stays charging.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. If onoly a battery than battery replacement is an option. Apple might tell yo what is wrong so you can them make an informed decision.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. If only the battery is bad then the exchange price is $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. It is s less for replacing he batteryGoogle for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Fix it yourself if you are up to it
iPod Touch Repair – iFixit

Different power requirements between 3G and newer iPods?

Similar Messages

Maybe you are looking for