Different query view format not shown

Dear Gurus,
  I am kinda new to WAD; Here I made 2 different query views(Different format) and used 'Query View Selection' in WAD. But somehow, when i choose different query views from the drop down list, the format of the result all seem to be the same(as the first chosen one). Is there any setting that i might have missed out?
  And here is another question, can i possibly fill 'Query view selection' from different Query? and how to do that ?
It's quite urgent for me, please help out ASAP.
Thanks a lot~~ Points will be rewarded~~
Charlie Lin

In the property of the drop down box, you should have property called affected area, in that select both the query views you want to see and you should see different result as you change the drop down box.
And also make sure your data provider for both of the views are different, need to create a new for the next one.
thanks.
Wond

Similar Messages

  • Query View name not saved in "Analysis Grid Properties" under Data Provider

    Hi BW World;)
    We are on BI 7.0
    I have created a BI workbook which contains a query view.
    However when we go into design mode and then "analysis grid properties" for this query view then "change data provider" it does not show the query view name but the query name. (we have saved the workbook)
    Is this the normal scenario?
    Surely should show the "query view name " and not the "query name" as confuses what data provider is being used?
    Is this a bug?
    Best
    Stevo.... Points of course... Thanks in advance.;)
    Edited by: bw4eva999 on Sep 10, 2009 4:40 PM     spelling

    Hi,
    You have created a workbook on top of a Query View which is again depends on a Query.Now the base for Query View is a Query.So the underlying Data Provider for a workbook is a Query.
    Hence when you go to Properties of grid->Change Data Provider,it shows the Query and the InfoCube,but not the Query View.
    So this is not a bug and this how its been designed.
    If you click for the Information of that workbook,it will show the Query and Info Provider,but not the query View.
    Though it looks like wierd,it is not a bug.
    Rgds,
    Murali

  • Query views are not using OLAP cache

    Hi,
    I am trying to pre-fill the OLAP cache with data from a query so as to improve the performance of query views. 
    I have read several documents on the topic, such as “How to… Performance Tuning with the OLAP Cache” (http://www.sapadvisors.com/resources/Howto...PerformanceTuningwiththeOLAPCache$28pdf$29.pdf)
    As far as I can see, I have followed the instructions and guidelines in detail on how to set up the cache and pre-fill it with data. However, when I run the query views they never use the cache. For example, point 3.4 in the abovementioned document does not correspond with my results.
    I would like some input on what I am doing wrong:
    1. In RSRT I have Cache mode = 1 for the specific query.
    2. The query has no variables, but the following restrictions (in filter): 0CALMONTH = 09.2007, 10.2007, 11.2008 and 12.2007.
    3. I have one query view with the restriction 0CALMONTH = 10.2007, 11.2008 and 12.2007.
    4. I have a second query view, which builds on the same query as the first query view. This second query view has the restriction 0CALMONTH = 11.2008 and 12.2007.
    5. There are no variables in the query.
    6. I run the query. 
    7. I run the first query view, and the second query view immediately after.
    8. I check ST03 and RSRT and see that cache has not been used for either of the query views.
    Looking at point 3.4 in the abovementioned document, I argue that the three criteria have been fulfilled:
    1. Same query ID
    2. The first query view is a superset of the second query view
    3. 0CALMONTH is a part of the drill-down of the first query view.
    Can someone tell me what is wrong with my set-up?
    Kind regards,
    Thor

    You need to use following process of process chain: "Attribute change run (ATTRIBCHAN)". This process needs to be incorporated into your process chains which loads data into provider on top of which your query is based.
    See following links on topic how to build it:
    https://help.sap.com/saphelp_nw73/helpdata/en/4a/5da82c7df51cece10000000a42189b/frameset.htm
    https://help.sap.com/saphelp_nw70ehp1/helpdata/en/9a/33853bbc188f2be10000000a114084/content.htm
    cheers
    m./

  • Query view is not displaying  data correctly

    Hi,
    We have built a query and 4 query views on the query and it is published in the Portal.
    In the query ,we have a restriction on cost elements.
    And on the query view we dont have any restrictions on costelements.
    But when we execute the query view,the query view is showing some restrictions on costelements.
    We have created a new query view on the same query and when we execute the query view in portal, it is showing soem restricitions on query view on costelements.Because of this User is not able to see all the data.
    Any one help us in understanding and fixing this problem.
    Thanks in advance!!

    Hi,
    These are the my assumptions  please can you check the same.
    1) cost element is always compounding with the controlling area can you check either any restrictions are there on controlling area.
    2) As you said in mother report( query) you are having the cost element restrictions , from that  query only you are creating query view so automatically which ever the restrictions are there globally on that report it will be worked on view also.
    so it is better to avoid that first and create teh view with out any restrictins then you can create one more view with the cost element restrictions
    craet main query with out any restrictions then creae te view with restrictions, you are doing vice versa.
    Thanks & Regarsd,
    sathish

  • APEX BIP report query output format - not able to set with a variable

    I have a Named Columns (RTF) report that is working great, but I can't control the output format with a variable. I can set the "Output Format" in the Report Query Attributes, but it doesn't work when I set the report output format to "Derive from item". No matter what the item contains, I always get PDF output. I can see the variable in my session, but it doesn't control the output format. I have tried using the values "xml", "XML", "rtf", and "RTF".
    Any help would be appreciated...

    My guess is that an exception is being thrown for some rows. Since you've stubbed out your catch phrase to do nothing you're not going to have any visibility into what exception was thrown. You need to put some kind of logging in the catch phrase to see
    what is happening.

  • Mail merge indian system 12,34,56,789 format not shown

    I am using Mail merge Word to Excel
    Numeric value has been typed in excel sheet as 123456789, I want it as 12,34,56,789 (Indian currency format) while displaying
    I want to display the number in the Word Mail Merge file as 12,34,56,789 (Indian currency format) and also if possible in words i.e. Twelve Crores Thirty Four Lakhs Fifty Six thousand Seven Hundred and Eighty Nine only

    For the mergefield number format, you could add a numeric picture switch to the field. To do this:
    • select the field;
    • press Shift-F9 to reveal the field coding. It should look something like {MERGEFIELD MyData};
    • edit the field so that you get {MERGEFIELD MyData \# 00','00','00','000};
    • position the cursor anywhere in this field and press F9 to update it;
    • run your mailmerge.
    Note: If you need to handle numbers that have only the 34,56,789 or the 56,789 or even just 789, you'll need to test the underlying values via an IF field and output the results with a different switch for each case.
    Cheers
    Paul Edstein
    [MS MVP - Word]

  • Location information on year view is not shown.

    Strangely I do not see the location information of my pictures that are taken in 2014 when I am in the "Year" view in Photos app. If I go in to the year itself (2014), I do see that all pictures have location information.
    I tried to reset the phone, turn of iCloud photo sync etc but nothing worked.
    It is very annoying, any clue how to fix this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Smart View Ribbon not shown when Excel is invoked using VBA

    Dear Hyperion Gurus,
    I am in need to invoke smartview refresh by calling excel using VBA from an excel module in another sheet(master template). But when I invloke Excel using VBA, smartview ribbon does not get activated, due to which the HypConnect, HypVMenuRefresh command does not work. If I directly open excel and run the module it connects fine and does the refresh without any problem. I have tried to enable and disable smartview using VBA but it does not work either. If I call excel directly using a batch using Call command, then it works fine, however the batch file does not close as if I use ThisWorkbook.Close command, then it does not completely close Excel, the instance still runs, and if I try to close using Application.Quit, then it closes down Excel completely. Any help would be highly appreciated.
    Thanks and Regards,
    SiddN.

    Hi,
    I was able to achieve this using batch files by calling the excel templates one by one.
    Thanks,
    SiddN.

  • Query Viewer not working

    New install of CFB 2 on Win 7 32bit with CF901.
    When right clicking on a database table in RDS Dataview I get an error , I get the error "/MyProject/.rdsTempFiles/RDS Query Viewer  does not exist". The same is happening when trying to open the RDS Query Viewer.
    This works correctly in CFB 1.
    Any suggestions what is going on? Is it a permissions issue or something similar? The .rdsTempFiles directory is created in the /MyProject folder and shows up in the Navigator.
    Thanks
    Doug

    Hi Kiran,
    I cannot login to the Forums (the login is apparently down) so will answer what I have found.
    Running CFB2 on Win 7 32bit. CFB 1 is also installed.
    Tried the following: ( CFB 2 ALWAYS started with -clean option )
    1. started with no projects at all in Nav. View.
         Added New Project called "test List" that was pointed to "C:\inetpub\wwwroot\testlist" folder - Query Viewer did not work
    2. deleted project from Nav View, deleted .project, .settings., settings.xml, .rdsTempFiles from testlist folder.
         Added New Project called "test List2" that points to same testlist folder. Query Viewer did not work.
         Renamed "test List2" to "testlist". Query Viewer did not work.
    3. Deleted project from Nav View, deleted .project, .settings, settings.xml, .rdsTempFIles from testlist folder.
         Restartd CFB2. Added New project called "testlist" that points to same testlist folder. QUERY Viewer worked successfully.)))
         Renamed testlist project to "Test List". Query Viewer worked.
    Restarted CFB2 and repeated 1 and 2. Even re-started CFB2 after adding a new  project before trying Query Viewer. Did not work.
    Uninstalled CFB2. Reinstalled CFB2. Same results as 1,2,3.
    Other interesting info.
    In the Error Log when I start CFB2, I always get the following.
         Unable to create a template transfer. Com.adobe.rds.core
         Three more entries with No message except "No stack trace" - com.adobe.ide.coldfusion.server
    This happens even after my reinstall.
    Hope this helps.
    Doug Smith
    [email protected]

  • Create A Query View!

    Hi ALL
    how to create a Query View for TeMplates?????
    Thanks
    BI Learner

    hello,
    Query views are saved version of query output with particulr navigational state
    The advantages of query views are:
    Query views can be used as the data providers when you are creating web templates.
    They are also used as jump targets. They are created after you execute the query, from the Save button, you can Save View global, or save as jump target.
    They can also be used to  format the query e.g hide some characterictic, display/hide result rows, sorting keyfigures etc.
    Reg migration:
    All existing SAP BW 3.x queries can be edited with the SAP NetWeaver 2004s BEx Query Designer without further manual adaptation.
    After editing with the SAP NetWeaver 2004s Query Designer, queries cannot be edited with the SAP BW 3.x BEx Query Designer anymore.
    Queries created or adapted with the SAP NetWeaver 2004s BEx Query Designer will still appear in the Open Dialog of the SAP BW 3.x Query Designer, but they cannot be opened anymore
    Views:
    Query Views that were created before upgrade/migration will still run after a query has been changed with the SAP NetWeaver 2004s BEx Query Designer
    In general query views do not need to be migrated
    Regards,
    Dhanya

  • Query Views.

    Hi,
    *How can the views can be seen a work book,whether they exist or not?
    *How can the views in workbook can be deleted?
    I am a little new to BW,kindly help on this issue.

    Hi,
    When you run a BEx query the result is displayed on Excel.You could save this as a workbook
    under a role  or  save view as global under a role.
    You can save different query views under a workbook. Also  you could delete query views and workbooks provided you have authorization
    Hope this helps.
    -Doodle

  • Variable in Query View

    We have a Query that display customer and sales information.
    Different Query View have been created from the Query and inserted into the WAD.
    When I execute the WAD, I have variable screen come up, I can see that the variable is filled with the value automatically (i.e. Period =7).
    Is this setting (fill variable automatically) done someway in the system? I dont want to fill the variable automatically.
    I changed the period from 1 to 5 and execute the query.  I can see the variable seleciton value (period 1 to 5) on the screen with result.
    From the screen, I can select and choose other query view. When I choose to other query view, I can see that system read back the default variable value (Period = 7). Why the system not read the variable that I entered (period 1 to 7), instead of default variable value?
    Is this bug? We're on BI7, enhancement pack 1. Do you have the same problem?

    sorry somehow my forums updates were not coming to me.
    when you are in the query designer go to menu and you could save different iview( info views for it). on your open file you could open files by iview and see which i view are saved and which one you want to fix. if your Iview is used in a report you could go to data provider and see what is the name of the iview and one you fix the query, go to that iview and resave it. and make sure that iview doesnt have the same defualt object in it.
    do this in yrou development system and test it through making sure on dependcies reports or queries ,before transporting

  • Query View missing in the BI Content

    Hi
    I want to install a 3.x Web Template which is using a Query View as the dataprovider, but the Query View is not available as D-version and hence the Web Template throws an error that the query view is missing and hence cannot execute the web Template.
    I have checked in the tables : RSZWVIEW and there is an entry but there is not object in RSORBCT to install.
    SAP BI_CONT version 704 level : 003
    When i try to activate the D-version of the query view the it gives the following message:
    *Object 0CSAL_C07_Q0101_V01 (Query View) could not be collected for object  ()
    Message no. RSO296
    Diagnosis
    You have collected objects in the BI Metadata Repository. Associated objects for object  of type  have also been collected. Object 0CSAL_C07_Q0101_V01 of type Query View was among these objects.
    However, this object 0CSAL_C07_Q0101_V01 of type Query View is not available in the metadata repository.
    System Response
    Object 0CSAL_C07_Q0101_V01 of type Query View is ignored in further collections. The links for object  of type  are incomplete. This may result in you not being able to activate this object.
    Procedure
    If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example.*
    Please let me know incase of any other info required.Thanks!

    Hi Kumar....
    Go to Datasource Repository(RSA2)................give the datasorce name and click on display.......from there u will get the extract structure name......copy it ...........go to SE11.............In the table field give the Extract structure name.............and click on the Where used list in the top.................from there u will get all the program name/Function module............where this extract structure is used...........copy that name and open it through SE37................
    Hope this helps..........
    Regards,
    Debjani........

  • Date is not shown in messages list

    For many emails that I am receiving from different accounts, date is not shown in messages list, only time.
    It looks like these messages were received today, in fact they are old.
    Encountered this problem on 2 different PCs, 3 different mail accounts (gmail and own server).
    What could be the reason and how to fix it?

    The messages shown without date are not today's, they can be few days, months or even a year old...

  • PeopleSoft Query View

    Folks,
    In Application Designer, I create a record with its type Query View. Because Query View has not connected with SQL Editor in the Tool, only SQL View and Dynamic View connect with SQL Editor in which we type in SQL statement, I don't know where to type in SQL statement for the Query View. Thus, building the record fails !
    Do any folks understand how to connect a record, whose type is Query View, with some existing SQL tables ?
    Thanks.

    The button to launch query should appear below the "Record Type" group box where you selected Query View. I tried removing query access from my permissions and I still see the button, so the only other suggestion I can offer is that the button is there but you need to scroll down or expand your window to see it...
    +-Record Type ---------+
    |                      |
    |  o SQL Table         |
    |                      |
    |  o SQL View          |
    |                      |
    |  o Dynamic View      |
    |                      |
    |  o Derived/Work      |
    |                      |
    |  o SubRecord         |
    |                      |
    |  @ Query View        |
    |                      |
    |  o Temporary Table   |
    |                      |
    +----------------------+
      Click to Launch +---+
      Query:          | ? |    <=== The button should appear here
                      +---+Sorry about the misinformation re permissions. Note that if you do find the button, it can take a long time to launch because of the SQL the tool runs to return the list of records. If necessary you can use the Query Access List cache to improve response, but if you don't use it often then be patient and it should launch eventually.
    Regards,
    Bob

Maybe you are looking for