Different set of values for two rings in an array of clusters

Hi, people.
Is it possible to do what it's shown in the attached picture?
I have an array of clusters. Two elements of the cluster are rings. Can I define a different set of values in the second ring (the one at the right) depending on the value selected in the first ring (the one in the middle)?
If not, could you give me a good alternative?
Thanks,
FranciscoMensaje editado por Porras
Attachments:
Rings.jpg ‏270 KB

I'm trying to do something very similar to your example but populate the comboboxes (or Rings) programmatically. What you have is so, so close but it seems to require input from the mouse to get the correct control. I don't really understand why you can change the String[] parameter in your program and it works fine but mine changes all the elements throughout the array. The Refnum for the control does not change regardless of what cell is selected. So, I'm a little puzzled how the correct cell or element is updated with the new combobox string.
Ultimately, I want to have an array of variables with an associated combobox (ring) of options. So, for variable Temperature, the options are Cold, Cool, Warm, and Hot. Then, variable 2 is Pressure, which might be Low, Medium and High. Yes, this is for a fuzzy logic controller (not part of the NI Controls Toolkit).
Any help is greatly appreciated!!!
Attachments:
TestRing.vi ‏19 KB

Similar Messages

In Garageband, getting two different sets of controls for two tracks of the same instrument

I have a bunch of recorded tracks, including two classic electric piano tracks. When I click on the topmost electric piano track's smart controls I get a little display with knobs marked reverb, ambience, etc. When I click the second one, I get things like decay, model... Why, and how do I get the controls I want (reverb etc) onto the second track?

Your tag is incorrect, you must be on OSX 10.9 Mavericks.
Do not delete the older iWork Apps. There are many problems with the latest Apps and you may have to go back to using the older versions.
Peter

HT1386 How can I have two seperate sets of Playlists for two different iPods on one computer?

How can I have two seperate sets of Playlists for two different iPods, on the same PC?

Open itunes.
Make whatever playlists you each like.
Connect one ipod, select only what you want, sync
Do the same for the other ipod

How to use different default parameter value for different report subscriptions

In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values:
Report name – Testsubscription.rdl
Subscription-1
Input parameter (default values):
start_date = first day of current Month
end_date = till date
Subscription-2
Input parameter (default values):
start_date = first day of current Quarter
end_date = till date
I know an alternative way of doing this would be to copy the rdl file with a different name but I am curious whether this can be done within a single report definition file. I am using SQL Server 2008 R2 Standard Edition.
Thanks!
spp

Hi sppdba,
As per my understanding, there is a report with two parameter: start_date and end_date, you want to configure subscription for the report, and set different default values for start date and end date. And you want to know if it is possible to achieve you
goal by using a single report definition file.
Since you are using SQL Server 2008 R2 Standard Edition, we need to achieve your goal by configuring two subscriptions for the report. For detail information, please refer to the following steps:
1. In design surface, right click start_date and open Parameter Properties dialog box.
2. In General pane, type Name and Prompt, set Data Type to Date/Time.
3. Click Available Values in left pane, select Specify Values.
4. Click Add button, in Label text box, type “First day of Current Month”, click (fx) button in Value section, then type the expression like below:
=DateSerial(Year(Now()), Month(Now()), 1)
5. Click Add button, in Label text box, type “First day of Current Quarter”, click (fx) button in Value section, then type the expression like below, then click OK.
=DateSerial(Year(Now()), (3*DatePart("q",Now()))-2, 1)
6. Right click end_date and open Parameter Properties dialog box.
7. In Available Values pane, select Specify Values.
8. Click Add button, in Label text box, type “Today”, click (fx) button in Value section, then type the expression =Today(), then click OK.
Now that the parameters are created, we need to configure subscription for the report. For detail information, please follow these steps:
1. Open Report Manager, and locate the report for which you want to create a new subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Subscription.
5. Select the delivery extension and data source for the subscription.
6. Select a method of delivery, then choose report delivery options.
7. Specify conditions that cause the subscription to process and delivery to occur.
8. Set start_date to First day of Current Month, end_date to Today, then click OK.
9. Create a new subscription as step4 to 7, set start_date to First day of Current Quarter, end_date to Today, then click OK.
The following screenshots are for your reference:
For detail information about Creating Standard Subscriptions, please refer to the following document:
http://msdn.microsoft.com/en-us/data/ms156307(v=sql.105)
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Extending flash: how do I set default values for filenames

Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

How can I set default values for Allocate Mode in AO config?

Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi ‏15 KB

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

Set a value for a variable of type exit

Hello,
I am filling some variables with multiple values in user exit.
Now, i would like to place some of these characteritics in Header area. It's of course impossible because there is multiple values but ...
I will put dropdown box in the web application for these chars. The problem is that by default, any value is assigned to the dropdwom ( any variable value is set).
Do you know how i can set a value for theses variable after filling all values by the user exit. SO that only one value is selected for the header and all others values available in the dropdown ?
Regards,
Jarod

Hi,
Off late, this seems to be a usual requirement.
Just create a Z program to call the FM API_SEMBPS_VARIABLE_SET and then call the FM API_SEMBPS_POST.
you should be preparing the content/set value to pass to the FMs. check the whereused list to see how this FMs can be used/called.
finally, run this program for your variable, after the loading/filling the exit variable. Please note that to set 'exit' variables, the sourcing variable's content need to be read/set first before setting the exit varible.
HTH,
Regards,
Nataraj.

Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Set default Value for a key figure

Hi Experts,
I need to enter a set o value for some char in a layout but for this set is not relevance a keyfigure. I know that there needs to be a keyfigure in the layout for the data to be saved to the transactional cube.
So is there a way to write a default value to the keyfigure without the user having to enter the keyfigure in the layout?
Any help will be rewarded.
Many thanks,
Fabio

I gave an example of = 0.
In youe case, if the default value is other than zero,
then:
= value.
Ravi Thotahdri
Pl let me know what fox code do you have.

Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

The javescript in below link works for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
However, I'd like to set default user for people picker only when user checks a checkbox.
I am new to development. Could you please help me on this requirement ?
Thank you very much.

Hello,
Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

Different set of values for two rings in an array of clusters

Similar Messages

Maybe you are looking for