Different sound post-export

After tweaking the equalizer and gain on a project I export the song. Unfortunately, the song sounds like none of the settings have stuck when I play it in iTunes. The equalizer settings in iTunes are off. The auto-normalize feature has been turned on; if I turn it off the exported song is full of distortion.
What I have now in Garageband: Project, tweaked equalizer, increased gain and auto-normalize on.
Result: Sounds great.
What I want: Export the project and having it sound very similar to what it sounds like in garageband. Don't care about the filetype, uncompressed, mp3, w/e.
How should I go about this?
Thanks!

Well, In this case I had to export the clips for some stock footage sites were each of them do have different recommendations in which format they want the clips.
One site had the option for clips saved as .mov with codec PhotoJPEG for most compatibily on any platform, another like to have the clips not larger as 300 MB were I had to use another codec like H.264 to let the export file smaller than the limit.
The exported files had all in base the same settings:
The H.264 file was exported with compression H.264, quality 75, 25 fps, clipdimension 1920x1080 px
The PhotoJPEG with best quality in color and with the same clipdimension.
Til now, I ccan see the only difference is the kind of compression -> H.264 instead of PhotoJPEG, but with different saturated colors in final file. Why?

Similar Messages

Loading a different sound on each frame

At present I have sound that loads when I click a button.
Inside the button I have this code
on(release){
gotoAndStop(2)
mySound_sound.loadSound("02.mp3",true);
How can I make the sound change to a different sound upon
reaching a certain frame automatically without clicking on the
button.
How can make it possible for the song to load automatically
when the movie reaches a frame without clicking the button.

umr wrote:
> At present I have sound that loads when I click a
button.
> Inside the button I have this code
> on(release){
> gotoAndStop(2)
> mySound_sound.loadSound("02.mp3",true);
> }
>
> How can I make the sound change to a different sound
upon reaching a certain
> frame automatically without clicking on the button.
please read reply to your duplicate post titled "sound" and
try not to post multiple threads
on same subject. It generally take more than few hours if not
days to get reply, so just post and
chill till someone find the time to read it through :)
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Playing two sound waves across two different sound cards simutaneously?

Hello all.
With the help from old board posts and the example VIs packaged with Labview 2009 SP1, I was able to get part of the way.
The goal is to simutaneously play two .wav files, to two different sound cards. So far:
1) I can play one wav file to either sound card
2) I can generate two sine waves of different tones, and push each out to the two cards seperately simutaneously.
But when I replace those two tones from #2 with .wav files, the wave files play alternately. So wav_1 plays to sound_card_1, THEN wav_2 plays to sound_card_2, not simutaneously.
Is it even possible to play 2 wav files simutaneously out to different cards?
I've included a VI of the attempt in #2 above. Disclaimer: my labview skills are minimal and this vi was very experimental so it's probably terrible form.
Solved!
Go to Solution.
Attachments:
sample_code.vi ‏23 KB

Tzoom84,
Since there is no way to buffer your sound output on the sound card and use hardware triggering you will be limited to software start timing. You could use semaphores as you said, or simply wire both of the Sound Output writes in parallel inside a single while loop. Since windows is nondeterministic the best you will likely achieve is the two outputs starting within tens of milliseconds of one another. The time between the two starting will be affected by all other processes running on your system and may take much longer.
Regards,
Sam K
Applications Engineer
National Instruments
www.ni.com/support

Different FM posting dates in PO or PR item with multiple accoun. assignmen

Hi,
I'd like to know if there´s a way to assign different FM posting dates, for each line of a distributed item in a PO or PR.
Example:
Purchase Requisition 4500000010
      Item 1 (has 2 different account assignments or is distibuted by percentage)
               50% goes to fund center XXXX, etc.
               50% goes to fund center YYYY, etc.
Right now we have the update profile for the PR set to delivery date, but it will assign the same FM posting date to the two different account assignments of item 1, because delivery date is on Item level. What I need is to know if there's a way to indicate the system to take different posting dates for each account assignment within the Item 1.
I hope that I was clear enough to make understand.
Thanks in advance.
Kind regards,
Víctor

Hi Victor,
I do not think, it's possible in standard...
Regards,
Eli

Can windows xp use a different sound card for itunes - I want to use a sound card for itunes and another for all other apps

Can Windows XP use a different sound card for itunes - I want to use a sound card for itunes and another for all ther apps

To the best of my knowledge, Windows is not capable of setting a specific sound card based on the app being used, it's all or nothing.
Try a google search or search the Microsoft site.

How to restore sound to exported avi? - Flash MX 2004 Pro

Hi,
Over the last couple of days I have been tinkering around with Flash MX 2004 Pro. More specifically, I have been importing avi's to the library and then placing the embedded video into a movieclip so I could have more control over it. While in the library I could preview the video along with the sound. Exporting the video again in avi format it would render the sound. However, all of a sudden it will only preview the video and not the sound in the library and the same goes for when I export a video there is no sound. The strange thing is the sound is still present when I test the movie. I have tried reinstalling the program with no luck. Any ideas?
Many thanks.

Well there is no answer to my question, but I did finally get the Adobe Media Encoder dialog box to come back again.
After uninstalling Premiere and QuickTime, then shutting down the computer, rebooting and logging on to the Admin account, shutting down again, rebooting again, logging in to the Admin account again ...
I then went in to the registry and removed all the Entries that had either of these in it:
C:\Program Files (x86)\Common Files\Adobe\DVA\COM
C:\Program Files (x86)\Common Files\Adobe\DVA\FLASH
and these as well
C:\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
C?\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
Rebooted the computer, logged back in to Admin.
I then re-installed QuickTime, and rebooted.
I then installed Premiere and the Adobe Media Encoder Flash dialog now shows up.
I'd be careful messy with the registry if you are trying to fix this type of problem. Try uninstalling quicktime and premiere and do the above shutdown, reboot sequence a number of times before doing anything to the registry.
I'm not sure what I'm going to do about that Flash Website I've working on...

Satellite A300 - Different sound in PSAJ4E and PSAG8E

I have two Toshiba Satellite A300. One is A300-15K (PSAJ4E) and has Conexant driver instaled. Second is A300-20E (PSAG8E) and has Realtek Semiconductor Corporation driver.
The sound comming from harman/kardon in the first is beautiful and in the second much worse. I tried to install Conexant drive in the second Toshiba but it doesn't work. I tried sound setup but without positive result. My system in both Toshibas is Vista 32 bit. Are there any possibilites to improve the quality of sound in the second Toshiba?
Thanks

>The sound comming from harman/kardon in the first is beautiful and in the second much worse.
Satellite A300-20E support HARMAN/KARDON speakers and Realtek sound chip.
The Satellite A300-15K supports HARMAN/KARDON speakers as well but it supports Conexant sound chip instead of Realtek sound chip.
The Realtek HD audio manager is installed on notebooks with Realtek sound chip and can be found in control panel.
There are different settings which could improve the sound quality.
The Conexant sound chip does not support such HD audio manager and I think this might be the reason for the different sound.
Greets

Hey. anyone knows how to synchronize the different sounds in a song the most easy way?

hey. anyone knows how to synchronize the different sounds in a song the most easy way?

Play better... just kidding. Set an appropriate quantize value for all the regions in the inspector window. If you are doing live playing and need to synch to that it is MUCH more complicated. If you're new at this it might actually be easier to re-play it.

Is it possible to play different sounds for emails and instant messages ?

Hello,
I was wondering if it was possible to play different sounds for emails and instant messages. I am using Thunderbird quite often with both emails and instant messages imported from Gtalk.
I think it would be very convenient to be able to distinguish both sounds as they do not imply the same things.
Thank you very much.
Olivier Hubert.

There are only six chat add-ons, three of them are about notifications. Pick one you think will do the job for you. https://addons.mozilla.org/en-US/thunderbird/extensions/chat/?sort=popular

Can you establish different sounds for multiple emails?

Can you establish different sounds for multiple email accounts?

Sorry no, sound/alerts is universal for different email accounts.

How to set different sounds for different events?

Hello I had Xiaomi Mi2s before and I could set different sound for every email account I had, for sms, for facebook and so on. How do I do it on my Xperia? Of course that for example SMS is more important then some facebook comment, so I would like to hear what happened because not every time I want to reach my phone.

Open each app > menu > settings > notification sound > change the sound > done > repeat as needed
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

My iPhone 4S keeps making different sounds than I have set up in the settings. How can I fix this?

I recently changed the sounds on my iPhone 4S in the phone's settings. I've done this many times before, but wanted a change. They worked at first, but now all of my notifications pop up with different sounds than I have set up. I've tried restarting the phone, I've tried to change the sounds to something new and then back again. An example is that my tweets on Twitter are set up in my settings to use the "tweet" sound. But no matter what I do, it always using the Tri-tone sound. NONE of my sounds are set up with the Tri-tone so I don't even know where it could be coming from. Does anyone know how I may be able to fix this? My Facebook and text message notifications are giving different sounds as well.

With T-Mobile I can go to the website, log into my account & there find options to send the settings for text, web browsing & email to my phone. I would assume the Tesco phone website (or O2) would have something similar.

Can you set different sounds for different incoming email accounts?

Can you set different sounds for different incoming email accounts? Example, I have multiple email accounts on Mail. I would like the sound for my roadrunner account to be different from my .mac and personal website accounts. Is it possible to configure this or is there a script out there that someone knows about.
Thanks

You could choose None in Preferences > General > New Mail Sound and set up a rule for each account in Preferences > Rules as follows:
If [any/all] of the following conditions are met:
[Account] [AccountName]
Perform the following actions:
[Play Sound] [Sound]
Problem is, that would cause the sound to be played for junk mail as well — probably not what you want.

If i have more than one e-mail account, can i have different sound alerts per account?

If I have more than one e-mail account, can I have different sound alets per account?

No, sorry.

Lose sound when exporting MPEG with QuickTime to iPod format

I paid the $30 to be upgrade to QuickTime Pro in the hopes that I would be able to export MPEGs from my digital camera for viewing in iPods. The video comes out fine but there is no sound. Any suggestions regarding how to get the sound to export too?

Thanks; the discussion is helpful.
When I downloaded the MPEG Streamclip software from http://www.squared5.com/; the conversion process was agonizingly slow. As an example, a single 6 minute Quicktime movie took hours to convert. After it was converted, then it not was recognizable by iTunes. So, MPEG Streamclip has not worked for me.
This seems like such a straightforward process that Apple would support. Basically, you can create iPhoto albums that synchronize with iPods; however you CAN NOT create Slideshows that synchronize with iPods. This is so frustrating since the slideshows have much more functionality and presumably would be what most people would find most useful. The process to get a slideshow to the iPod requires you to go through Quicktime and then Quicktime to ipod; this process only occassionally seems to work.
Anyway, Quicktime Pro, the $30 application, seems to sometimes work and sometimes not work for conversion of Quicktime files to iPods. I tried using non AAC protected audio files for the iPhoto slideshow sound and the conversion from Quicktime to iPod worked. In other cases, the conversion from Quicktime Pro to iPod did not work. I am at a loss to explain consistently what is happening when you use Quicktime to export to the iPod. When I open the Quicktime movie file the option to Export to iPod is grayed out. However, when I open the Quicktime application the option is black and available.

Different sound post-export

Similar Messages

Maybe you are looking for