Differentiate between Items and Customer Items

Differentiate between Items and Customer Items
pls try to give information about this
thanx

Hi Joel,
Funny you mentioned it, because just today I was thinking about that, and I thought that if it will happen, I will rant you on your forum dereliction of duties. So it seems you’re off the hook now :)
Anyway, judging from the last 3.0/3.0.1 versions it seems like you are doing your other duties very well so I really don’t mind you keeping the lead.
Best regards,
Arie.

Similar Messages

  • Difference between booked items and requested items

    Hi Gurus,
    I wanted to understand the difference between
    Booking History - booked items – booked date
    Booking History – requested items –booked date
    The Series definition has the same definition given in the hint. I checked one of the below links for the same topic but couldn't get a full view.
    Which series go to Actual_quantity in Standrad collections
    Can any one let me know what the difference between booked items and requested items is? As I understand in OM, we have no differentiation. Do let me know
    Thanks
    DNP

    Hi
    In normal circumstances, there is no difference between requested item vs. booked item. But if you're using Item Substitution, these could be different. For example, a customer may call to request item A but for multiple reasons it may be substituted by a different item (usually an upgrade with similar form, function etc).
    Oracle APS supports this functionality out of box in order promising and ASCP where it can be done based on a pre-defined relationship based on availability etc.
    Hope this answers your question, please feel free to let me know if I may help calrify further
    Navneet Goel
    Inspirage
    [email protected]

  • How to clear the open items and parked items for customer

    Hi Experts,
    I need to clear the open items and parked items for customer.
    So any one could let me know the transaction code and procedure for clearing the items for customer.
    Best regards,
    Kesava balaji.

    Hello,
    Parked items will have NO RELEVANCE, unless you post it.
    You CANNOT clear parked items.
    You can clear the posted items using F.13 or F-32
    Regards,
    Ravi

  • Different figure display between Balance and Line items

    How can I find out the difference between line item and Balance in FS10n?
    Actually when I Executing the FS10N the balance of DR. balance is greater then that account Dr. Balance line item.
    Can any one tell me why?
    Thanks & Regards,
    Anandakumar

    Its a sundry debtors gl account. All the line item and open item transaction balance are displaying.
    but the amount is not displaying (difference amount).
    Any one has solution pls tell me.
    Thanks in Advance,
    Anandkumar

  • Diff between TAN and TAS item category

    hi
    wht is the diffrence between TAN and TAS item category and how to configure during implementation stage.
    Thnaks

    Hello,
    Main difference between TAN and TAS is, TAN is relevent for delivey and TAS is not relevent for delivery.
    TAN is used in normal business process and TAS is used in third party process.
    In the item category determination it will be like
    OR -- NORM--> TAN --> TAS
    OR --> BANS --> TAS.
    Prase

  • What is the difference between Alternate and Substitute item?

    Hi guys
    Can any one help me in understanding the difference between a Alternate Item and Substitute Item.
    Please refer any link / document for further study, if available.
    Thanks in advance
    Sreee

    Does Oracle have the concept of a substitute component, irrespective of the BOM in which it could exists?
    For example, Component A can always be replaced by Component B. This would be applicable to Product X or Product Y, both of them use Component A.
    Oracle seems to have the concept of a substitute component on a specific BOM (BOM_SUBSTITUTE_COMPONENTS).
    http://download-west.oracle.com/docs/cd/A60725_05/html/comnls/us/bom/bomtas05.htm
    Using this functionality, I would have to specify B as a substitute in two different BOMs - one for Product X, one for Product Y.
    I am wondering if there is a global "Subsititute Item/Component".

  • Doubt about report FBL5N of screen field:Open items and Cleared items

    hi
    i know the report FBL5N is use DDF LDB and the report work flow is BSID->BKFP->BSEG
    but i don't know to differentiate Open Items and Cleared items in this report.
    Open items and Cleared items stand for a field flag in these table (BSID,BKFP,BSEG )? if true the field is?
    or they must be calc in program ? if true what about calc rules?
    waiting for help! thank you!

    Hi,
    Here is the difference in Open Items and Cleared Items.
    In FI first the document is Open (when it is posted) so the entry is made in table BSID. Once the document is cleared, it will move from BSID to BSAD. And for Cleared item you will see Clearing Document no and Clearing date values updated (these are blank when the item is open).
    The only difference in Open and Cleared is via Clearing Document and Clearing Date. If the values are present, it means document is cleared.
    Hope this helps.
    ashish
    Message was edited by:
            Ashish Gundawar

  • Interest calculation on Open items and cleared items

    Dear Experts
    I am trying to do needful configuration for interest indicator on which interest can be calculated for open items and cleared items as well.  But,  system is calculating interest for open items properly, but not calculating interest on cleared items with same interest indicator,  I am repeatedly getting error "interest calculation indicator is not compatible with this type of interest calculation"
    Is it possible to use same interest indicator for open line items and cleared line items of customer?
    If possible, request you share the needful config steps to do same.
    points will be awarded for usful reply.
    Best regards,
    S. Habib Pasha.

    Hello Habib,
    depending on the requests you can setup a item interest calculation or a balance interest calculation "Define calculation types".
    IIC: check settings (item selection, all cleared items, only items with payment, no cleared items) "Prepare item interest calculation"
    I guess you have setup the item interest calculation - maybe you have mixed some entries with BAIC.
    Check in "Prepare account balance interest calculation" whether you have entries with the indicator you want to use.
    At least check your entries in "Define time-based Terms" If you have entries with Balance account interest calculation the system gives even an error.
    Hope this is helpfull.
    Best regards
       Horst

  • Unable to display the Kit Items and component Items in XML Publisher

    we have created an Order with Kit Items,when we Pick Release the Order it is not printing Kit Items as it is Oracle standard functionality. We customized the Pick Slip RDF to display Kit Items.
    when we run the XML Publisher version of Pick Slip report, it is displaying component Items on one page and Kit Items on another page without header information.
    How can we display Kit Items and Component Items on single page instead of 2 pages?
    Please give us suggestions to implement this in XML Publisher.
    Thanks&Regards,
    Suresh.

    Suresh
    I dont know anything about the Pick Slip template so am unable to help without more information.
    If there are enough kit items to fill more than one page then w/o reducing the font size you'll have to put up with the items spilling to a second page
    Tim

  • JQuery Tutorial needed to customize Add New Item and Edit Item forms

    Hello,
    I need a tutorial to use JQuery to customize the UI Screen of SharePoint to add a new item in a list.
    since I don't have prior UI experience it will be nice if the tutorial is specifically targetted towards customizing the automatic form which is presented by sharepoint when we try to add an item to a custom lists.
    val it: unit=()

    Hi,
    According to your post, my understanding is that you want to customize the New Item and Edit Item forms using jQuery.
    The following examples for your reference:
    http://ankursharepoint.blogspot.com/2012/10/jquery-for-tabbed-navigation-in.html
    http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
    https://www.nothingbutsharepoint.com/sites/eusp/Pages/10-jQuery-Snippets-for-SharePoint-2010.aspx
    jQuery Tutorial
    http://www.w3schools.com/jQuery/
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Launching FBL5N for "Normal items" and "Vendor items" the output ...

    Hi All,
    In my system customers are vendors too, with two different codes linked in the section "Account control" of the master data of each of them.
    Launching FBL5N for "Normal" items and "Vendor items", and for the WHOLE RANGE of customers, the output list shows first all items of  vendors and then the items of customers.
    I'd like to obtain a report launched for the WHOLE RANGE of customers with an output list which shows me for each customer-vendor code, the customer and vendor items displaied alongside.
    Is it possible by FBL5N? If not, is there another report fo this purpose?
    Thank you for your advices.
    Gandalf

    Do you know another report which can help me?
    Thanks

  • How to show statistics of main item and related items with less filter?

    Hi experts,
    Have any of you come thro' similar requirements before?
    To show the statistics of a main item in different aspect in a document and show the comparison of this item in a particular aspect with other related items as inputted at prompt.
    You can image that, for the comparison, if I build another query for the related items, there will be duplicated dimensions, which we aim to avoid as duplicated dimension confuse end users.
    However, if i build the main items and related items in same query, for those reports of main item only, I need to add a report filter one by one!
    Any one of you have better idea?
    Thanks and Regards,
    Cherry

    You Should use Formatted Search in this case.
    You must create and associate a query for your field.
    click on the field you want items to be listed and press Shift + F2
    catch the keydown event of this field  and check pval.charpressed = 9 (tab key press)
    then execute
    SBO_Application.SendKeys("+")

  • Difference in the Balance between FS10N and Customer Balances in Local Curr

    Hi,
    When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
    Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
    What could be the possible reasons for the differences..
    Thanks

    Hi Varshani,
    Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
    SAPF070  - Compare Documents and Account Transaction Figures
    Description
    This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
    A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
    After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
    Output
    The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
    Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
    If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
    SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
    Description
    If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
    Requirements
    All of the following listed requirements must be fulfilled:
    1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
    2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
    3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
    4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
    5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
    Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
    You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
    It is advisable to execute a test run first, which will list any differences that are found.
    Further notes - Authorizations
    Repair program authorization group (F_005)
    Company code authorization         (F_BKPF_BUK)
    Thanks
    Venkata Ganesh Perumalla
    Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

  • Differentiate between mapping and optimization.

    Hi
    tell me some thing about this.
    Differentiate between mapping and optimization.
    please
    urgent. imran

    user571615 wrote:
    Hi
    tell me some thing about this.
    Differentiate between mapping and optimization.
    please
    urgent. imranThis is a forum of volunteers. There is no urgent here. For urgent, buy yourself a support contract and open an SR on MetaLink.

  • Htmlb:tree differentiate between nodeclick and tree node expander click

    Hi,
    how can i differentiate between nodeclick and tree node expander (to get to its children) click in my event processing in htmlb:tree element.
    <u><b>What i am trying to achieve?</b></u>
    Onload just load root node and its immediate children.
    On node expand get the children of the current node and modify htmlb:tree table2 with additional node inofs.
    on node click  call some client function.
    But my issue is that i am not able to differentiate between node expander click and node click in my event handling. Any help on this is appreciated.
    (I am not using MVC)
    Thanks in advance.
    Regards
    Raja
    Message was edited by: Durairaj Athavan Raja

    After reading your weblog I think I understand better. I did some testing with my example.  I am using the toggle = "true", so that the page returns to the server each time an expander is selected.
    <htmlb:tree id          = "myTree1"
                  height      = "75%"
                  toggle      = "true"
                  title       = "<b><otr>EQI Reporting Tree</otr></b>"
                  width       = "90%"
                  onTreeClick = "myTreeClick"
                  table       = "<%= application->selection_model->itview                             %>" >
      </htmlb:tree>
    However I have not added any coding in my event handler to respond to the expander event.  I only respond to myTreeClick (which loads some data for the given selection).  The BSP tree element itself must be doing the hard work for me. 
      if event_id cs 'tr_myTree1'.
        data: tree_event type ref to cl_htmlb_event_tree.
        tree_event ?= htmlb_event.
        if tree_event->server_event = 'myTreeClick'.
          clear appl->message1.
          appl->selection_model->get_chart_data( appl = appl
                                                 node = tree_event->node ).
        endif.
      endif.
    I pass my entire tree defintion to the element.  It appears that it only sends visible nodes to be rendered. When the expander is selected, I don't have to do anything, the tree re-renders with only the newly visible rows. 
    I tested and turned off the toggle (toggle = "false") and my page took forever to load because it was sending all the nodes to the frontend on the first load.

Maybe you are looking for