Diffrnce btwn copy cntrl item catgr(vtfa) n asgnmnt item categories(vov4)

Dear All Gurus,
This is my copy control screen(VTFA) Copying control: Sales document to billing document
Target billing type          ZJF2 Job Work Invoice
From SalesDoc Type     ZJOR Job Work Order
ALES     ALE Third Party
TAD     Service
TADC     Configurable Service
TAO     Milestone-Bill.Plan
TAS     Third Party Item
WODD     Service
And this my Item category assignment screen(VOV4)
Saty        itcgr           usage      Hlevitca      Dfitc          MItca
ZJOR     0001          empty     ZTAK     TAC
ZJOR     0001     CHSP     empty     ZTAK     TAC
MY QUESTION IS WHY COPY CONTROL ITEM CATEGORY ARE DIFFERENT FROM ASSIGNMENT ITEM CATEGORY.
WHY COPY CONTROL ITEM CATEGORIES HAS NOT BEEN USED IN ANY SALES DOCUMENT AS WE SEE THE ASSIGNMENT ITEM CATEGORIES IN SALES DOCUMENT AND BILLING DOCUMENT.
Basically I wanted to know what n where exactly copy control item categories make effects.How it works?,what does it control.
Reply will be rewarded
Thank you so much
Umed

Dear Umed,
what so ever we configure in IMG is reflected in sales order processing like which sales document type we are using and what will be the item category for that particular sale document type.
I would like to give you an example for better understanding. suppose you have created sales document type and maintained all the entries as per the requirement of business process and you also create the Item catgory for the same and maintained item category determinatio as well. Similarly you have created delivery type and delivery item category and determination for the same. But now the question arise how the data flow from one transaction to the other transaction e.g. from sales order to delivery, delivery to billing and so on.
therefore in sum up we can say that copying control is the life blood of SD process. I think you have understand the concept.
Regards,
Bharat B

Similar Messages

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Copy down Ship-to Partner from main item to sub-items on Sales Order

This is my first post on the forums here. I'd appreciate any help you can give on my issue below.
I have a requirement to copy down the ship-to partner from the main item to sub-items during sales order create or change. Currently I have code in include MV45AFZB within user exit USEREXIT_FILL_VBAP_FROM_HVBAP as follows:
<i>* Need to be able to copy the ship-to of a BoM parent down to the
respective BoM children if the parent has a different ship-to
from the header.
data: wa_xvbpa like vbpa.
Clear: wa_xvbpa.
read table xvbpa into wa_xvbpa with key posnr = hvbap-posnr
                                        parvw = 'WE'.
A BoM parent line has a different ship-to from the header.
    if sy-subrc = 0.
      read table xvbap with key uepos = hvbap-posnr.
See if current line is the child of that BoM parent
        If xvbap-uepos = hvbap-posnr.
          move wa_xvbpa-kunnr to xvbpa-kunnr.
          move xvbap-vbeln to wa_xvbpa-vbeln.
          move xvbap-posnr to wa_xvbpa-posnr.
          move 'WE' to wa_xvbpa-parvw.
          modify vbpa from wa_xvbpa.
        endif.
      Endif.</i>
This isn't working for me. At one point, I was able to copy the ship-to down to the first sub-item but not any subsequent ones. I'm sure I need to add some code to another sales order user exit to get this to work, but I'm at a loss at this point.   Has anyone had to do this or something similar before?
Thanks very much in advance for your help.
Angela

Hi,
Can you check few more things and tell me?
- In this exit, does XVBPA and XVBAP contains all the line items. ( main and sub items ).
- In Sales order creation time, do these table have VBELN populated when this exit triggers.
- If you modify XVBPA or XVBAP in this exit, do they get overwritten after that.
Try this code. See if it works. Let me know if you still have a problem.
DATA: wa_hvbpa LIKE vbpa,
      wa_xvbpa like vbpa.
CLEAR: wa_hvbpa, wa_xvbpa.
* check if HVBAP and VBAP line items are not same
IF vbap-posnr <> hvbap-posnr.
* read the ****-to partner from main-item
READ TABLE xvbpa INTO wa_hvbpa WITH KEY posnr = hvbap-posnr
                                          parvw = 'WE'.
IF sy-subrc = 0.
*   read the line item data for sub-item based on main item
    READ TABLE xvbap WITH KEY posnr = vbap-posnr
                              uepos = hvbap-posnr.
* See if current line is the child of that BoM parent
    IF sy-subrc = 0.
      MOVE wa_xvbpa-kunnr TO xvbpa-kunnr.
      MOVE xvbap-vbeln TO wa_xvbpa-vbeln.
      MOVE xvbap-posnr TO wa_xvbpa-posnr.
      MOVE 'WE' TO wa_xvbpa-parvw.
      MODIFY vbpa FROM wa_xvbpa.
    ENDIF.
ENDIF.
ENDIF.
Regards,
RS

Sales order Userexit to copy item text from one line item to other

Hi Gurus,
             I have an urgent issue. Based on item category in sales order, for one line item, I am getting item text. Now I have to copy same item text to other line item.
Till now I tried save_document_prep & save_document to
build object tdname & fetch all tdid from table stxh for object 'VBBP'.
After that READ_TEXT and SAVE_TEXT function module.
But during creation of sales order I am not able to get any value in STXH table for created sales order. Now I want to know from which internal table I can get item text ? (some internal table should be there like xvbap to get text per line item)
Or is there any other way to do this... Please help.
Points will be rewarded.
Thanks,

Hi ,
try something like this .
        l_name = ls_vbap-vbeln.
        IF l_name IS INITIAL.
          l_name = 'XXXXXXXXXX'.
        ENDIF.
        CONCATENATE l_name ls_vbap-posnr INTO l_name.
        CALL FUNCTION 'READ_TEXT'
            name            = l_name
Regards
Prabhu

Copy higher level item texts to lower level items

Hi All ,
I want to copy the texts of the higher level items into lower level items
i created a logic how to copy the texts from higher level to lower level
but the problem is there are so many textid's in higher level items,
how to determine the all id's dynamically with out hard coding,
is there anytable exists to determine the text id's automatically depending on the salesorder and itemno
helpful answers will be rewarded fully
regards
krishna

Hi,
You have to go as below:
With Sales Order Item, you get Item Category i.e VBAP-PSTYV.
With Item Category, go to table TVAP to detemine field TXTGR i.e Text Determination Procedure
Now check table TTXERN with fields TDOBJECT = VBBP - Denotes Sales Order Item
and TXTGR retreived from TVAP. Retreive the results of TDID which are the text id's associated for that sales order item.
So the relation is VBAP -> TVAP -> TTXERN.
Check and let me know if you have any problem.
Kind Regards
Eswar

Copy Sales Order item texts completely to other item in same sales order

Hi;
I need to know how we can copy item level text to other item texts in same sales order. We are maintaining most of data may duplicate but not always. So I need to copy the the earlier text & paste in item created newly.
Pl. answer.
Thanks ;
avinash

Did you get answer for this query? I have a same situation and wondering if you already have a solution
thanks

Problem with Configurator - Cannot Update Item Attributes for a Config item

Hi!
We configured an item to reproduce the following feature of Oracle Configurator in our business case (Oracle Configurator Modeling Guide - 115czmod.pdf): «For example, if you have raw materials that are ordered by lengths, do not create an item for each length. Instead, define a single item for each raw material with an attribute: Length. Then capture the needed length from the end user by a numeric input or from a List of Options, and associate that input with the attribute.»
However, after we run the AutoCreate Configuration Items program the item was created in the Item Master but no Attribute was updated with the user defined values (within OConfigurator).
We associated Item Attributes to Propoerties and these are associated to Feature Options.
we wish to have the Item Descriptive Element Values (Item Catalog)
transferred from the Configurator run time, after we configure any item.
This is because we are working with item dimensions, such as length and width.
We need to define these dimensions during the Configurator run time and have them transferred into the final configuration so that we can use them later on manufacturing. We wish to display these dimensions on a job.
Support said that "The descriptive element value for the configuration item is copied from the model. This process will not look at the properties in the configurator.
You may consider using the custom hook for catalog descriptions to get the selected attributes from CZ to the descriptive elements for the config item. Please see Custom CTO Packages under Setup page 2-63 in CTO Process Guide for more details."
I'm trying to implement the suggested solution.
I've customized user_catalog_desc procedure on CTO_CUSTOM_CATALOG_DESC package to populate the item catalog values.
I'm failing to find the descriptive element values defined on configuratior for a specific inventory item id.
I have managed to found a relation between "p_params.p_item_id" given in procedure user_catalog_desc and
the configurated item_id in order to update the catalog data on the CTO_CUSTOM_CATALOG_DESC package.
This is what I've done:
procedure user_catalog_desc (
p_params IN CTO_CUSTOM_CATALOG_DESC.inparams,
p_catalog_dtls IN OUT NOCOPY CTO_CUSTOM_CATALOG_DESC.catalog_dtls_tbl_type,
x_return_status OUT NOCOPY VARCHAR2)
is
begin
declare
counter number;
i number;
l_value varchar2(30);
begin
-- Put your logic here in such a way that you populate p_catalog_dtls
-- parameter. p_catalog_dtls is a array of records. The attributes of
-- this record are cat_element_name and cat_element_value.
-- viz. record (
-- cat_element_name varchar2(30),
-- cat_element_value varchar2(30)
-- Example : p_catalog_dtls(1).cat_element_value := 'XYZ';
-- IMPORTANT : DO NOT ALTER THE VALUE OF cat_element_name . Doing so will
-- result in incorrect or inconsistent behaviour.
-- Make sure you set the x_return_status variable to one of the following:
-- FND_API.G_RET_STS_SUCCESS to indicate success
-- FND_API.FND_API.G_RET_STS_ERROR to indicate failure with expected status
-- FND_API.FND_API.G_RET_STS_UNEXP_ERROR to indicate failure with unexpected status
select count(*) into counter from MTL_DESCR_ELEMENT_VALUES
where inventory_item_id = p_params.p_item_id;
for i in 1 .. counter loop
select
distinct to_char(nvl(cz.input_num_val,cz.item_num_val)) into l_value
from OE_ORDER_LINES_V oe
, oe_order_headers_all oeh
, CZ_CONFIG_CONTENTS_V cz
where oe.header_id = oeh.header_id
and oeh.order_number in (
select distinct oeh.order_number
from OE_ORDER_LINES_V oe
, oe_order_headers_v oeh
where oe.header_id = oeh.header_id
and oe.inventory_item_id = p_params.p_item_id)
and cz.ps_node_name = p_catalog_dtls(i).cat_element_name
and oe.config_header_id = cz.config_hdr_id
and oe.config_header_id in (select distinct cz.config_hdr_id from CZ_CONFIG_CONTENTS_V cz)
and cz.ps_node_name in (select element_name from MTL_DESCR_ELEMENT_VALUES where inventory_item_id = p_params.p_item_
id);
p_catalog_dtls(i).cat_element_value := l_value;
end loop;
x_return_status := FND_API.G_RET_STS_SUCCESS;
end user_catalog_desc;
end;
Although the customization seam correct the AutoCreate Configuration Items process
terminates with warning, and the catalog info is not updated as expected.
Can anyone help me on this?
Many thanks in advance.
Paulo Santos

How did you solve this issue? During my testing I found there to be no link to the order lines when I was within this program. Therefore I am having issues getting the configuration information to populate the catalog. Is there a link and I just was doing it wrong? Thanks for any help!
Thanks,
Angela

Cumulation of lower level item prices to higher level items

Hi,
We have a specific requirement that we use high-level materials that is not relevant for pricing and lower level items connected to higher-level item that are RA and billing relevant. How do we modify the pricing procedure to cumulate (roll-up) the lower level items to higher level item which is not price relevant but statistical value should be updated at this level for billing purpose.
We want to achieve this using/modifying only pricing procedure and not via user exit..
Request SAP experts to provide some inputs to this issue..
BR/Rajasekhar

Hi rajsekhar
But generally if you want to transfer the cost of the sub item to main item then you can check the box Cumulative cost in copy control VTFL . But your requirement is quite opposite .So you need to go to assign a New Reqt / Alt calc type to the cond type , telling that the header item cost which is not relevant for pricing has to be transferred to sub item .So you need to integrate with the ABAP'er to give inputs to him and giving our requirement also
Regards
Srinath

Change item value when a specific item has changed... how can i do that?

Hi guys, i need to ask something...
Is it possible to have a process or a computation, that gives value to an item, only when one specific item has changed.
I have other items on my page too, but this two are related, and i need to give a specific value to the first one, only when the value of the second has changed...
Help please
tsveti:)

Hey Farhan, i guess i need some help on that easy javascript...
i havent done much thing with it so i have almost none experience with js....
So in 'HTML Form Element Attributes' for the second item I m trying this :
onchange="javascript:{document.getElementById('P1_SUBPROJECT').value = '-1';}"
but when i change the value of this second item, the first one (P1_SUBPROJECT) dont get -1
what am i doing wrong?

Cleared items still shows as open items in transaction FBL3N

Dear All,
We have an issue with respect to cleared items still shows as open items in transaction FBL3N.
Few documents has been posted and cleared, but still those line items still shows as open items. We had this problem only for few line items.
For other line items this clearing process is working properly without any issue.
Issue:
1. Documnet has been posted on 15.08.2209 and the same document has been cleared on 12.03.2010, but this document still shows as open item only....
Looking forward your response / suggestions to resolve this issue.
Thanks in advance
Regards,
Prasad

Hi Prasad,
You have the following ways to find out the reason:-
1. Check your selection criteria in FBL3N, if you are selecting open items as on 15.08.2009, then they will still show open items..
2. Check in table BSIS and BSAS and check where the documents are appearing.If they are cleared, they all should be appearing in BSAS.
This is standard SAP and most probably it has got to do with dates...
Regards,
SAPFICO

Get PO and Item number from FI Cleared Items

Hi,
I need to retrieve PO and item numbers from FI cleared items.
So I retrieve the records for a particular GR/IR account from table BSIS. Based on FI document number, item number, fiscal year and company code, I get the PO and item numbers from table BSEG.
However, I cannot use BSEG in query i.e. SQ01.
What is the easiest way for me to retrive PO and items numbers?
Thanks.

Hi,
First of all, cleared items live in BSAS. BSIS is for the items that are still open.
Goto SQ02 and make a direct table read to BSAS; click 'Extras' icon; on the right part of screen click 'Create' icon; give name BSEG and choose 'Additional table' radio button. The keys suggested by the system should be good.
Regards,
Ming

FBL3N - line item visible both as open item and as cleared item

Hello,
Please can you tell me possible reasons for which I see the same line item in FBL3N as an open item when I check "open items" and as cleared when I check for "cleared items".
Thank you !
Daniel N.

There is a small correction:
It is not partial it is residual.
In case of partial your original document will be intact - Open items will show debit, credit and the balance.
In case of residual, your original amount will be deducted and a new entry gets posted as if there is a new transaction. For example from 100 USD if 40 USD has been cleared, then two line items will be shown in 40 as cleared items and a new line 60 will be generated in open items 60. But, this 60 will have different document number.
I think there is some issue the way in which selection criteria has been selected.
Please do not see the open items at a key date. Because that date it might be open item, later at a stage it might have become a cleared item.
Do not restrict any dates and see the total items (cleared items and open items) and let me know if the same document is showing as cleared as well as open. This is more unlikely and I have not seen.
Regards,
Ravi

Error while editing PO - deleting service line item and creating material line item.

In SAP SRM Extended classic scenario, PO is in 'ordered' status and contains a service line item. While editing this PO, I delete the service line item and create a new material line item. This gives me the following error.
Back end error: Enter G/L account
Back end error: LIne item still contains faulty items.
This happens only with service- material comibination and no other combination(material-service, service-service, material-material).
I need to know the reason for this issue and how it can be solved?

PO Values (Inc Tax):
Item 1: INR 228 L
Item 2: INR 27.83 L   (Payment also done in 2008)
GR for Item 1: INR 207.46 L
Remaining Comm = INR 21.01 L
Item 1 having 73 sub line items.... fo some of the sub-line items GR for some qty already done in last fiscals.
User changing for remaining qty.
Budget Report values:
Previous Years: Budget, Actual & Assigned = 304.85 L
                            Available = 0      (Carry Forward done for Budget & Commitments)
2011:                   Budget = 75.15 L
                            Actual = 53.86 L
                            Comm = 21.01 L   (Same as Remaining Commitment)
                            Avai = 0.28 L
Hope this will help.

The phone could not synced beacuse this computer is no longer authorised for purchasing item that are in this item.. this problem occured on my iphone

the phone could not synced beacuse this computer is no longer authorised for purchasing item that are in this item
this problem is faced on synced new songs, videos or picture.. plz say the solution about this topic

Hey nani91191,
Thanks for the question. It sounds like you may simply need to authorize your computer with your Apple ID:
iTunes 11 for Mac: Authorize a computer to play iTunes Store purchases
http://support.apple.com/kb/PH12303
iTunes 11 for Windows: Authorize a computer to play iTunes Store purchases
http://support.apple.com/kb/PH12511
Authorize a computer to play iTunes Store purchases: Choose Store > Authorize This Computer.
If you are using a Windows PC, you may need to turn on the menu bar to access the "Store" menu:
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
Thanks,
Matt M.

User Exits for Item Category Determination based on Item Category Usage

Hi Gurus,
If I need to create a new item category usage code and perform item category determination using the new item category usage code, is there a user exit or function module which is able to perform this?
Thanks & Regards

Hi Lawrence Tam,
If you are going to create a new item category usage to determine an item category, you need to add a new line in transaction VOV4 for the new combination of sales document type + Item Cat. group + usage + high leve item cat. to determine the item category.
Thanks in advance,
Mariano.

Diffrnce btwn copy cntrl item catgr(vtfa) n asgnmnt item categories(vov4)

Similar Messages

Maybe you are looking for