Dimension: Automatic Updates of Lower Level Records
Hi -
In a dimension, when the parent level record gets updated, does OWB automatically update the child records too?
For example, lets say I have two levels - Product Category and Product. So, the product records will have the product category attributes denormailized in the dimension. If I update one of the product category attributes using OWB, will that change automatically trickle down to the product records also?
Thanks in advance for your response.
I've just found this question, whilst looking for a similar answer myself. I know its been months since this has been asked, however since no answer was presented, I went searching. I've tested this on XP SP2, however I STRONGLY advise testing this in your own test environment, before going production... create the following regfile and import it. If you have trouble, email me and I'll email it as a file if requested.
DaveyK - lists@ [nospame] daveyk.dyndns.org
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\JavaSoft\Java Update\Policy]
"EnableAutoUpdateCheck"=hex:01,00,00,00,d0,8c,9d,df,01,15,d1,11,8c,7a,00,c0,4f,\
c2,97,eb,01,00,00,00,c0,0b,5b,98,44,66,9d,4b,98,13,59,e4,c6,92,fa,88,00,00,\
00,00,1c,00,00,00,50,00,61,00,73,00,73,00,77,00,6f,00,72,00,64,00,20,00,44,\
00,61,00,74,00,61,00,00,00,03,66,00,00,a8,00,00,00,10,00,00,00,e6,88,2f,8a,\
bb,3b,3f,48,b2,18,ad,fc,c0,9e,d1,60,00,00,00,00,04,80,00,00,a0,00,00,00,10,\
00,00,00,e3,a1,9b,8d,09,f6,83,e6,0c,43,f4,33,40,fa,ea,8f,08,00,00,00,dc,c7,\
ac,fd,8c,50,fc,1c,14,00,00,00,09,01,f0,c3,3a,dd,f1,3f,6a,de,fc,2d,bf,29,d3,\
f6,46,44,55,1b
Similar Messages
-
Automatically update of the info record price conditions from last purchase
Dear.
I need to massive update the info record price conditions from the last purchase order price for a list of materials.
Does exist a standard transaction where I can I do this ?
Thanks.hi,
Yeah, I just checked it..
Its not possible in Std. SAP system...
There is no field provided for the same...
the other way, but doesn't applies to you...as you are doing massive job...
still if req. then check..
The other way is:
Maintain Quotation and ref. it in inforecord...price gets updated easily from it...
Regards
Priyanka.P -
Location field to be automatically adopted to lower level WBSE
Dear SAP Gurus,
We are going to give the location to Level 3 WBSE. Now that Location field need to get copied to level 4 WBSE.
How this automatic assignment will be carried out ?
Thanks & regards,
PradipDear Murali,
I have tried the Substitution . I am able to write the prerequiste but I do not know how to write subsitution for copying the location field of Level 3 WBSE to Level 4 WBSE.
If possible please guide me for above.
Thanks & regards,
Pradip -
Hi,
I have problem when install Adobe Pr Pro CS6 with DeckLink HD Extreme 3D
My workstation have configuration as following:
Supermicro workstation
Super Micro x8DAL-i
Intel Xeon E5645 2.40Ghz
4GB DDR3-RAM x 2
NVIDIA Quadro 2000 1GB Graphics
250GB SATA 7200 RPM
2TB 7200 RPM SATA x 2
DVDRW
Window 7 Pro 64bit
I can capture with Media Express but when I try to capture from CS6 with Decklink HD Extreme 3D, the Error message: “A low-level exception occurred in: Blackmagic Design (recorder) “
Any one can help me urgent please
Thank you,
DragonhnI have seen an issue with the latest Blackmagic driver and capturing with the current version of Premiere. I would use Media Express to capture and then just import the files.
Eric
ADK -
Microphone/ very LOW level / bad records
hi
i want to record simple voices into my G5-Dual 1.8GHz - but in every application (iMovie, FinalCut, Garageband, Quicktime) there is a very LOW audio-recording-level and i can't get a clear signal. the level controller at the audio interface is set to MAX-Input.
I'm using the TASCAM US122 audio-interface and different microphones (Bus Powered).
testdrive with other mics and a brandnew interface (TAPCO/Mackie Link.USB)
result the same bad recordings at lowest level.
1. Audio/MIDI configuration is set to the audio interface/s.
2. System-Audio Preferences are set to the audio-interface/s
3. Deleting the Audio/MIDI-preference-files within the Pref-Folder will take NO CHANGES.
4. Application-Preferences are set to the audio-interface/s
Thanks for any ideas.
regards mikei've checked the different mics with phantom power turned ON (with new battery) To testdrive the mics i've connected and checked them all with my acoustic-amp. They are ALL working well there.
next i've tried a brand new USB-Audio-Interface (with Mackie Preamps)
connect it with my G5 and... got the same bad records like the cheaper TASCAM.
Once more i think the G5 has an error - maybe the USB-ports?
(I've tried every USB-port).
Should i buy and try a FIREWIRE-interface? -
HELP! My soundblaster 5.1 records at SUPER low levels
i just bought a soundblaster li've! 5. on saturday... and since then, i've been trying to record with my microphone... but... for some reason, the volume level records too low. Even with the microphone boost checked off... and the mic volume all the way up. I thought it was the mic, so i got another one... same problem.
I'm running:
Windows XP Professional SP2
Athlon XP 2600+
.0 GB Ram
NVidia GeForce FX 5700 Ultra
on an ECS L7S7A2 motherboard.
Any solutions or anyone else experiencing these problems?P-Hill,
This type of microphone has a higher impedance than condenser microphones and usually requires a mic pre-amp in order to get a decent audio volume with it. You might want to look into getting a preamp for it so you can run through the line-in as the power that is provided over the mic input is not enough for a dynamic microphone.
Jeremy -
Updation of higher level item text to lower level item text
Hi All,
while creating sales order VA01 i need to pass the value of higher level item text to lower level item text
for that i read the text of the higher level item text using the fm read_text
and pass the text to the lower level items using save_text and commit_text
this coding works only when the lower order item text is empty
my queries are
1. if the lower level item having some text that text will be replaced by the higher level item text, that is happening but showing error that I/O error , how to solve this
2. while gone to VA02 and add one more item then also same error is happening how to solve this please help me.
regards
krishnagot the solution
-
Updated content for multi-level record structure in PLSQL
Hi All,
please help me
Need a FUNCTION which would take PERSON_id as the INPUT PARAMETER and RETURN the FULL DETAILS in a multi-level record structure in PLSQL.
CREATE TABLE people(
name VARCHAR2(5),
person_id number
INSERT INTO people(name,person_id) VALUES ('n1',1);
INSERT INTO people(name,person_id) VALUES ('n2',2);
INSERT INTO people(name,person_id) VALUES ('n3',3);
INSERT INTO people(name,person_id) VALUES ('n4',4);
INSERT INTO people(name,person_id) VALUES ('n5',5);
INSERT INTO people(name,person_id) VALUES ('n6',6);
A person can be assigned many tasks. Below,we can see person_id =1 has 2 tasks 10,20
CREATE TABLE tasks(
task_id number, --->PK
task_name VARCHAR2(5),
person_id number -->FK to People
INSERT INTO tasks(task_id,task_name,person_id) VALUES (10, 'cleaning',1);
INSERT INTO tasks(task_id,task_name,person_id) VALUES (20', 'washing',1);
INSERT INTO tasks(task_id,task_name,person_id) VALUES (30, 'sweeping',2);
INSERT INTO tasks(task_id,task_name,person_id) VALUES (40, 'ironing',3);
Each TASK has many ACTIVTIES as below. Below,we can see task_id =10 ---->3 ACTIVITIES of activity_id of 100,200,300
CREATE TABLE activities(
activity_id number,
activity_name VARCHAR2(50),
task_id number, --->FK to task table
INSERT INTO activities(activity_id,activity_name,task_id)VALUES (100, 'Clean home',10);
INSERT INTO activities(activity_id,activity_name,task_id)VALUES (200, 'Clean Garden',10);
INSERT INTO activities(activity_id,activity_name,task_id)VALUES (300, 'Clean clothes,10');
INSERT INTO activities(activity_id,activity_name,task_id)VALUES (400, 'Wash car',20);
Write a FUNCTION which would take PERSON_id as the INPUT PARAMETER and RETURN the FULL DETAILS in a multi-level record structure in PLSQL.
Meaning We would get
First ,person_details for a person-->next level is TASKS-->Activities_list in a NESTED RECORD SET
create or replace function person_details(person_id NUMBER)
RETURNs a
PERSON_DETAILS RECORD structure as shown below.A person -->Tasks--> all activities
record PERSON_DETAILS[1]
person_id,
name
TASKS_DETAILS[1] ---->2nd level
task_id[1],
task_name[1]
ACTIVITIES[1]----->3rd level
activity_id[1],
activity_name[1]
ACTIVITIES[2]
activity_id[2],
activity_name[2]
ACTIVITIES[3]
activity_id[3],
activity_name[3]
*(1)--Most important part is how do i DEFINE AND DECLARE the RESULT RECORD SET in my FUNCTION?
(2)--HOW DO WE DYNAMICALLY ALOCATE MEMORY for the record structure based on the no. of rows by each SELECT?
(3)Access the nested levels and FILL in the DATA in the above record seperately USING SELECT statements.
*/*SELECT 1 ---Find and fill Person*/*
*select person_id,name from people where person_id =1*
*-->From this SELECT fill the OUTER record PERSON_DETAILS[no. of records] -->person_id,name*
*/**SELECT 2 ---I want to FIND all TASKS for THE ABOVE PERSON and fill the next part */*
*select task_id,name from tasks where person_id = PERSON_DETAILS[1].person_id*
*We get three TASK_ids,*
*-->From this, HOW TO fill DATA for each TASK,how to PERSON_DETAILS[1]->TASKS_DETAILS[1st record].task_id -->person_id,name*
*/**SELECT 3 ---I want to FIND all ACTIVITIES for THE ABOVE TASKS and fill the next part */*
*for EACH of the TASKS found,we need to LOOP and*
*select activity_id,name from activities where task_id = PERSON_DETAILS[1].-->TASKS_DETAILS[1st record]--->ACTIVITY_DETAILS[1].activity_id*
I have tried my best to explain with the tables and the relationships.I just hope its not confusing now.Edited by: user_7000011 on 01-Apr-2009 12:46try this one.
Learned something new today.
CREATE TABLE temp_clob_tab(result CLOB);
CREATE or replace TYPE task_t AS OBJECT("@task_id" NUMBER,
last_name VARCHAR2(20),
activitylist activity_tab
create or replace type activity_t as object("@activity_id" number, activity_name varchar2(20));
CREATE or replace TYPE tasklist_t AS TABLE OF task_t;
create or replace type activity_tab as table of activity_t;
CREATE or replace TYPE people_t AS OBJECT("@people_id" NUMBER,
task_name VARCHAR2(20),
task_t tasklist_t
DECLARE
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
BEGIN
DBMS_XMLGEN.setRowTag(qryCtx, NULL);
qryCtx := DBMS_XMLGEN.newContext
('SELECT people_t(person_id,
name,
CAST(MULTISET
(SELECT e.task_id, e.task_name,cast(multiset
(select activity_id,activity_name from activities a
where a.task_id = e.task_id) as activity_tab)
FROM tasks e
WHERE e.person_id= d.person_id)
AS tasklist_t))
AS peoplexml
FROM people d
where person_id = 1');
-- now get the result
result := DBMS_XMLGEN.getXML(qryCtx);
INSERT INTO temp_clob_tab VALUES (result);
-- close context
DBMS_XMLGEN.closeContext(qryCtx);
END;
select * from temp_clob_tab ;output
<?xml version="1.0"?>
<ROWSET>
<ROW>
<PEOPLEXML people_id="1">
<TASK_NAME>n1</TASK_NAME>
<TASK_T>
<TASK_T task_id="10">
<LAST_NAME>cleaning</LAST_NAME>
<ACTIVITYLIST>
<ACTIVITY_T activity_id="100">
<ACTIVITY_NAME>Clean home</ACTIVITY_NAME>
</ACTIVITY_T>
<ACTIVITY_T activity_id="200">
<ACTIVITY_NAME>Clean Garden</ACTIVITY_NAME>
</ACTIVITY_T>
<ACTIVITY_T activity_id="300">
<ACTIVITY_NAME>Clean clothes</ACTIVITY_NAME>
</ACTIVITY_T>
</ACTIVITYLIST>
</TASK_T>
<TASK_T task_id="20">
<LAST_NAME>washing</LAST_NAME>
<ACTIVITYLIST>
<ACTIVITY_T activity_id="400">
<ACTIVITY_NAME>Wash car</ACTIVITY_NAME>
</ACTIVITY_T>
</ACTIVITYLIST>
</TASK_T>
</TASK_T>
</PEOPLEXML>
</ROW>
</ROWSET> -
Automatic creation of purchase info record
Hi friends
I could not find check box in RFQ (ME41!N)or in Quotation (ME47N) for updating/automatic creation of purchase info record.
Thanks
SunnyHi,
you can maintain the info update for the required quotation through ME47.choose the required line item and click on the "item detail" icon and put the necessary value for info update:
1- No update
2-A Update with or without plant
3-B Update with plant (if no plant ban)
4-C Update without plant (if no plant requirement)
Indicator: Update Info Record
Determines whether:
The purchasing info record for this vendor and material is to refer to this PO item, and
The item is to be valid for the entire purchasing organization or just for the plant.
Use
The indicator determines which prices and conditions are suggested in future PO items.
Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
Procedure
Enter the relevant plant key:
A
Updating of the document number is effected at plant level as long as there is a purchasing info record at plant level. Otherwise the document number is updated at purchasing organization level.
B
Updating is effected at plant level if plant conditions are allowed for the plant.
C
Updating is effected without plant data if plant conditions are not necessary for the plant.
Dependencies
The level at which updating of the document number may be effected is defined for each plant.
Hope this will clarify your query.
Thanks & Regards,
Bijay Pradhan -
Automatic update net price in PO creation
Dear expert,
I just found an issue while creating a new PO.
I fill in all data needed, included net price. And when I press "enter", surprisingly the system automatically update the Net price with last PO price. and I need to manually change again the net price with current price.
Anyone can describe why system automatically update the PO price? is there any setting to inactivate it??
thanks much,
nasikhinHi,
Please read the note:
456691 FAQ: Price determination in purchasing
3. How does price determination determine the conditions via a 'Last
purchase order'?
Answer:
If the info record does not contain any valid conditions, but a "last
document" exists for the info record, the system copies all of the
conditions from this document if the following prerequisites are met:
o The net price must be zero (EKPO-NETPR = 0.00) after the system
has carried out price determination.
Page 5
However, the net price is not zero after price determination has
taken place and the system does not copy the conditions from the
last PO if master conditions that are included in the net price
calculation are maintained at, for example, vendor level or
material group level.
o The last document is not a request for quotation.
o The info record has not been deleted.
o The vendor and the material in the info record are identical to
the vendor and the material in the last document.
o The calculation schema of the last document is the same as the
current schema that has been determined.
The system simply executes a copy function to transfer the conditions
from the last document. The system does not check for requirements for
the calculation schema.
The system does not copy the condition records of the subsequent
settlement (the condition type has the condition class "C"); instead,
they are always determined again to ensure that the condition records
are consistent with the field contents (also see Note 486757).
If you generally do not want the system to transfer the conditions from
the last PO, you can use the user parameter EVO to deactivate this (also
see Note 675523).
So you can use the parameter EVO.
Best Regards,
Arminda Jack -
Automatic updation of WHO columns in Oracle forms 6i
Hi,
I am using Forms 6i Version. I have developed a simple form with one database block. The form should display the colums in the table and should allow insert/update/delete operations on the form.
I am able to update and delete the data through the foem. However my form doesn't allow me to insert data. This is because the creation_date and created_by columns in the table cannot be null.(custom table).
And I dont want to have these fields in the form.
I want the who colums to be automatically updated in the custom table through form, which is not happening currently.
Pls help.
Thanks
DeeptiDeepti,
I have called the FND_STANDARD.SET_WHO in pre-insert /pre-update triggers. Still I could not get the who columns updated in my custom table.
Was this done at the block level? -- Custom Oracle Form Fails when User Looks at the 'About This Record' Information (Doc ID 236642.1)
Thanks,
Hussein -
I need to allocate low-level code to a material while creating in mm01..
hi experts,
In the material master record, each material is allocated one low-level code (field L.Lvl Code) which is determined by the bill of material (BOM) management program.I couldnt find this field in any of the tabs while creating the master record.So can u plz help me out to find this.
Thanks in advance..Ramesh,
You cannot create an LL code entry in MM01. The purpose of MM01 is to create Material masters. LL code is managed by the system, automatically, during BOM maintenance. SAP does not give the users the ability to edit LL codes.
It is unwise to attempt to change LL codes. Improper entries in this field could lead to MRP results that will not meet your business requirements. You should generally let SAP automatically manage this data for you.
In the case where you believe you have an incorrect LL code, SAP does have some OSS notes that apply. Start with [544489|https://service.sap.com/sap/support/notes/544489].
Regards,
DB49 -
Low level Hex disk edit & search util needed- suggestions please?
low level Hex disk edit & search util needed- suggestions please?
Maybe It's just late & I've had a bad day.... but I haven't needed a low level Hex disk edit & search utility suitable for an Intel 10.4.x Mac until now and can't seem to locate one.
There should be plenty of free/shareware options (because they're handy and not particularly hard to write ... and every tech head needs one some time)...
Any suggestions please?
[I haven't bothered with the commercial stuff - like tech tool/Norton/*insert name here* Recover/repair, Something Genius etc. etc. because they are all without exception either unnecessary (just pretty shells for the underlying UNIX/X utils) useless AND greedy $-gougers, just useless, or just money gougers so I couldn't even say whether any still have a 'feature' like the old Norton Disk editor app had - but a quick look about suggest not...]
grumble
Any specific suggestions/links, please?
TIAthey are all without exception either unnecessary (just pretty shells for the underlying UNIX/X utils) useless AND greedy $-gougers, just
useless, or just money gougers
Such a high-esteem for fellow human beings - and
programmers...
You know, there are some good decent nice people
behind those names?
You'd be amazed at how much testing goes into a product.
[SNIP]
g'day Hatter...
Yes, I know there are some good decent nice people behind those names..fellow human beings - and fellow programmers (so yes, I do know...) In previous incarnations I have 'thunk up' and developed, Marketed & supported considerably more complex Apps & systems myself - I even know some of the people you mention personally - and they are usually decent Blokes/women but normally, it isn't the programmers who make the decisions on pricing/features/support/performance/upgrade costs & cycles etc...
My only error was, I agree, the phrase 'without exception' - but (mainly) only because I haven't bought/tested & used all of them very very recently. So I offer my apologies to those to whom my remarks should not apply (long, late night/early morning frustration...)
However, I also offer a few simple pertinent examples:
One 'top name' Utility company had a 'save your Mac HD' product on the market for some time that was almost guaranteed to TRASH it irretrievably but did NOT say so - nor did they help or compensate those they harmed.
Several are selling what amount to simple, pretty, GUI shells for 'free' or OS-included command line tools - no more, no less but do NOT say so and are asking good money for the 'software'.
Many are asking ridiculous prices for "regular upgrades" so you can keep their tool current with your Mac OS - one wants US$100/year for it, another, $15 per u/g, others, US$25 or $40 per u/g; one asks 'only' $10 - and these 'upgrades' are happening 3,4,5,6 times per year and are necessary for the Marketing company to keep their product Saleable to new purchasers and new Macs (as well as for important Bug Fixes - and only co-incidentally to keep it performing with your current Mac and OS - which is what you paid them for in the first place).
I won't pay for a product 3, 6 or 9 times and I won't advise my clients to: It's not unreasonable for a person to expect a 'sensible lifetime/currency' of Product X for Computer Y - say 3 years (e.g. AppleCare). I wouldn't object to paying for an "upgrade" at that point - IF it's worth the money.
Software is Waaay too expensive in many cases and is simply inviting 'piracy' - from people who have already PAID for the product: sadly, they are killing their own Gooses.
Seriously, one product costs ca. US$100 to Buy in the first place
To keep it actually working for you costs about the same again Per Year - a 3 year 'sensible lifetime' or 'currency' cost of US$300 or $400! [That'll buy a lot of 'bare drives' to put in a handy Firewire case for automatic backups in Background, differential backups etc. and other simple practices which render this product type largely unnecessary ].
For what? A relatively simple set of utilities which would actually cost the company involved less than $5 total each - over 3 years - to make available to existing ( or 'current') owners. [Applecare 'complete' Hardware and Software warranty & support on a US$2000 iMac - which includes Tech Tools Pro Deluxe or somesuch costs about US$165 for 3 years. Total.]
Having designed, developed, Marketed, supported & maintained more complex Applications to/for a sizeable user-base (in US terms) over multiple complete Series of Product 'life-cycles' - regular Updates and all, I think I know where the pirates are.
These practices have been rampant in the MSWindows™ market for a longtime. It's a real shame to see it in the Mac world.
I have all the esteem in the world for those fellow human beings who deserve such - and programmers who are 'good decent nice people'.
I have none to spare for monopolists, 'exploitationists' or any of those who take unfair/unreasonable advantage of their fellow human beings - AND of programmers who are 'good decent nice people' (like, say, ME... .
In any event, as I said: they are "killing their Gooses": I know of at least 6 software companies which went this route a while back. All are dead or dying.
Thank you for your help - and the opportunity to apologise for 'mis-speaking'.
all the best,
orig g4 733, many others thru (the luvly) Macintels New & old Macs, Wintels, MacIntels, other systems... -
The Windows 7 account I am using has admin privilege.
The automatic update displays an error message pop-up. In English it would be something like: "The installation encountered errors: You need administrator privlige to install Adobe Flash Player. Please log on as an administrator and try again."
At Windows 7 I am using the standard UAC security level settings and I am not willing to lower them. I am also not willing to install a Player update manually for three browsers every other week.
Any solution?
ThanksYour page http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html mirrors my Flash Player as
at Chrome: 11.2.202.229
at Firefox: 10.3.183.11
at IE: 10.3.183.11
So I manually update once more for Firefox and once more for IE and hope it will update automatically from then on.
Thanks
p_p_s
B.t.w., your email notificatioan says To post a reply, either reply to this email or ... but upon mail reply mail.sgaur.hosted.jivesoftware.com... is... sorry to have to inform you that your message could not be delivered -
How to disable automatic updates
Today, for the very first time, updating Adobe came with the notice it would make automatic updates the
default setting. It said one could change that by going to Update Adobe Preferences. However,
every single button on the application does not yield such an update.
FYI - I have some back ground in electronic warfare and internet attacks. I believe automatic updates
are a dangerous setting in two instances:
1) You are running a program (such as a compiler or critical low level editor that will fail if it does
not have total control) which can be interrupted by or be messed up by the install; also most
installers do not want to be running at the same time as another installer is running;
2) You are the victim of a peculiar kind of cyber attack that USES auto updates to DELIVER malware.
For this reason, users with expertise and appropriate systems need to be able to control when
updates happen. The notice system is fine. This "you must do it" and the hard to find way to turn
it off (assuming it exists) isn't fine. FYI the adobe information base article on the subject
- if you call it - refuses to load and says it is no longer available!el cid wrote:
However, every single button on the application does not yield such an update.
I am not quite sure what you mean by that; don't you see this:
Maybe you are looking for
-
How can I make a back-up of my bookmarks in Safari?
I am using Safari 1.3.1 (v312.3.3) and can't find a way to back-up my bookmarks. Apple's help area say I should be able to back up "favorites" by choosing export from the fle menu. I don't see an export or import at all! Does anyone know how I can ma
-
Getting error while running jar file
Hi, I am getting below error while running the jar file "Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jdeveloper/layout/XYLayout:" I have created a simple ADF desktop app in which i am displaying the frame.I created the jar from
-
i tried to restore my iphone 4s because it kept saying "searching..." for service so i decided to restore it, after having already reset all network settings, and after trying to restore all settings. still, it only said "searching..." for service. f
-
How to transfer itunes library via external hard drive?
How do I transfer my entire itunes library to a new pc via an external hard drive? I want to also keep the library on my old pc. Because my library is about 30gb I thought that getting an external hard drive would be the easiest way to do this. Are t
-
Opening Pages '09 document in 5.0.1 - Format is skewed
Hello all, I have a new computer with Mavericks and Pages 5.0.1. I had created a lengthy document in pages 09 and now when I am trying to open it in pages 5.0.1 the formatting is all sorts of messed up. Does anyone know how to fix this issue withou