"Direct Delta" Update Method - Why need for Collective update

Hi folks,
I have been going through LO Cockpit in detail and read quite extensively about new update methods and still have one doubt.
1)Why there is "Job control" for "Direct Delta" Update method in LO Cockpit?.
If I understand Direct Delta correctly, Application data is directly posted to Delta Queue by SAP Update management using V1 and when the Delta request comes from BW it is read from the Delta queue. So...
2)why bother about collective run and
3)where exactly are we going to collect from - there is no intermediate storage like extraction Q or update tables?
One more question. I noticed that Delta queue is a stopped qRFC. what does this mean?

Hi Jay,
These questions have been answered by Roberto Negro in full detail of his 3 episode Blog...
Please read his blog.
Click Weblogs above and search for Roberto Negro.
--Jkyle

Similar Messages

Cant unninstall lightroom 5.4 needed for install update 5.5, i have delete all file and registry but install fails

Cant unninstall lightroom 5.4 needed for install update 5.5, i have delete all file and registry but install fails again and again, now i i cant use lightrrom .. grins.
I use SSD disk and i cant have lot of uninstal file (have to clean disk often)
Thanks for help

Hello Jeff,
Many thanks for your answer, i use windows 8.1! I have found the problems: For install the news version the install need the old installer (but i delete all installer, cause they use a lot place on hard drive (SSD)).
I have desinstall the whole Adobe and réinstalled it, i have save the whole installer on a external disk. So when the installer asked the old installer i indicate to programm my external disk ans all works good now.
Many thanks for you help, i have just do not to delete old file (sad to have to save old installler just for install the new).
Wallie
(sorry my english)

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

How to enable delta without data transfer option for Collections - Extracts

Hi All,
My question is basically related to FSCM - Collections related data sources and Init and Delta loads of the same.
Once the Init is completed, I wanted to do delta without data transfer and option is graded out - means can not really select the option for Collections Data Sources ..
For Example I have OCLM_INVOICE as my data source which has lot of data to extract - and in the Init stage itself, its either giving errors or keeps running for longer time (Records to be extracted is ONLY 400000) and finally shows in the monitor as 400000 of 0 Records..
And also Is there any place where I can find that all of Collection data sources are TIME STAMP based or other options.
I appreciate your quick an ddetails reply and points will be awarded for sure.
Thanks
AK.

As far as I remember there some datasources which wont support init w/o data transfer. I guess COPA is one of them. I havent worked on datasource 0CLM_INVOICE but it is possible that even this could be same case. When I seached on help.sap.com for this datasource, I found this info -
(I am pasting content because strangely the webpage doesnt give html link for this search result window)
DataSource Transactional Data: 0CLM_INVOICE
This DataSource is used to extract the transaction data of an invoice from Accounts Receivable Accounting (FI-AR). The system determines the key figures from the amounts of the line items belonging to the invoice. The date fields each contain the respective date of an action that refers to a line item. The extractor provides the data in optimized form for SAP Collections Management.
Technical Data
Application Components Collections Management (0FSCM-CLM)
Available as of Release mySAP ERP Value Pack 2005.1
Shipment SAP NetWeaver 2004s BI Content Add-On 3 SP02
Content Versions There are no content versions.
RemoteCube-Capable No
Delta-Capable Yes
Extraction from Archives No
Verifiable Yes
Data Modeling
Delta Update
The DataSource permits delta update with generic delta processing using the time stamp. The system determines the invoice reference for a document in Business Transaction Event (BTE) 5010 and saves it with a time stamp. In the case of a delta upload, it determines the amounts of the line items based on these document numbers.
Extractor Logic
Verification of Key Figures
If necessary, you can check the key figures of the individual customers as follows:
In the source system, from the SAP Easy Access screen, choose the following function: Accounting u2192 Financial Supply Chain Management u2192 Collections Management u2192 Integration with Accounts Receivable Accounting u2192 Process Receivables (Old).
Enter the required customer.
The Customer Account - Process Receivables screen appears. Here you see a list of all invoices for which there are open receivables.
Using this list, you can compare the following key figures:
Original Amount of Invoice or Credit Memo (INVOICE_AMOUNT)
Amount Paid (PAID_AMOUNT)
Open Amount (OPEN_AMOUNT)
Total of All Credit Memos for Selected Invoice (CREDITED_AMOUNT)
Amount Arranged for Payment (PAYMENT_ARRANGED)
Unsychronized Backup Recovery in BW System
If you import backup copies asynchronously, you have to initialize the delta procedure for the DataSource again.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 18, 2008 5:00 PM

Captivate 5 Now 5.5 Why Pay for an update

It seems to me that Captivate 5.5 is really an update, fixining things that are wrong or have been missed in Captivate 5. In fact Adobes description of 5.5 states it has fixed, improved some areas of captivate 5.
So why are customers expected to pay for 5.5. I have only recently purchased Captivate 5 and now I am told there are things wrong with it and I need to purchase 5.5.
Why haven't Adobes updates to Captivate 5 included all things they are now releasing or have fixed in 5.5.
This needs investigating under the fair trading act.

What's worse, once you open and save a 5.0 project in Captivate 5.5, you will not be able to open it in 5.0 any longer. So everyone will be forced to move to 5.5 eventually to keep projects compatible.

Client PC showing updates needed for declined updates

I have many, not sure how many client computers both server and client OS showing 'Needed Count' for updates that were 'Declined' and/or 'Not Applicable'. Anyone know how this happens and if it can be resolved. It would be greatly appreciated.
As the client obviously shows as not being up to date for reporting.
Thanks.

I have many, not sure how many client computers both server and client OS showing 'Needed Count' for updates that were 'Declined' and/or 'Not Applicable'.
Physically and Logically Impossible!
Declined updates show ZERO counts for all states.
"Not Applicable" and "Needed" are mutually exclusive states.
Perhaps you could describe in more detail what you are observing?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Need for Keyboard Updater for Replacement Keyboard

Apple Care just sent me a replacement Keyboard and it works great.
My question is do I need the run the Apple Keyboard Update 1.0 again?
http://www.apple.com/downloads/macosx/apple/firmware_hardware/applekeyboardupdat e10.html
I suspect change is already in my 10.5.6 (Build 9G66) and it is internal to the
iMac rather than something that needs to be updated in the actual keyboard

That update was not for your Mac.
You are correct! I selected the wrong updater. I think this is the one for my iMac
http://www.apple.com/downloads/macosx/apple/firmware_hardware/aluminumkeyboardfi rmwareupdate10.html
I just downloaded it and got a dialog box saying
Your keyboard does not need this update
It already has the updated functionality.
This posting is now closed and marked Solved

The iOS update methods I use for error free updates

I hope this helps some folks. I am not saying this is the 100% tried and true method but I have upgraded quite a few iPhones and never experienced an error or issue upgrading the software when following below method.
1) If iOS 4 or greater, double-tap Home button to bring up running app list and hold first app to get jiggling and kill all apps one at a time until task bar is blank.
2) Put iPhone into Airplane mode. (this will ensure that an incoming phone call, text message or push message won't interrupt the update)
3) Do a graceful power-off by holding Top sleep button until red "slide to power off" then slide to power phone off and allow phone to fully shut down.
4) Now press and hold Top sleep button and Home button at same time and continue holding both. The phone will begin to boot and you will see Apple logo but while continuing to hold both buttons the Apple logo will eventually go away and phone will seem to power back off but KEEP HOLDING BOTH BUTTONS and phone will power up again and Apple logo will popup again. KEEP HOLDING BOTH BUTTONS and phone will power down for good this time. When you release both buttons the phone should stay powered off. If phone begins to boot/power up when releasing buttons, you have not held them long enough. (Note: This power off/reboot sequence is very handy to remember for when your iPhone starts acting weird.)
5) Press Top sleep button to turn phone back ON.
6) Hook to your computer and Sync with iTunes and also create a Backup of phone in iTunes.
7) Now update your phone with the iOS update and it should run smoothly.
Thanks goes out to "TITNTUFF" for suggesting the Airplane Mode.

The method i use is this, every new update apple comes out with, i always DFU mode my iphone, and do a clean install of the iOS. This to ensure that I don't get any problems when updating my iphone. I have done this all previous models and never had any issues.
DFU will take some time but for me it's worth it. Airplane mode is a good way to this.

After Update Trigger not triggering for first update

Hi All,
I have written a Trigger on AP_SUPPLIERS table to update AP_SUPPLIER_SITES_ALL when payment priority gets updated on AP_SUPPLIERS table. Trigger calls a pragma autonomous procedure after update happens, and updates sites table. We are on R12 (12.1.3) with DB 11.2.0.3.0
Somehow this is not working for the first update, after that for every update it is working. Any idea why this might be happening?
Trigger Code:
CREATE OR REPLACE TRIGGER XX_AP_SUPPLIER_SIT_UPD_SYNC
AFTER UPDATE
ON AP.AP_SUPPLIERS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
l_vendor_id     NUMBER;
l_paym_priority NUMBER;
BEGIN
   XX_AP_SUPSITE_UPDATE(:NEW.PAYMENT_PRIORITY, :NEW.VENDOR_ID);
   EXCEPTION
     WHEN OTHERS THEN
       RAISE;
END XX_AP_SUPPLIER_SIT_UPD_SYNC;
Procedure Code:
CREATE OR REPLACE PROCEDURE APPS.XX_AP_SUPSITE_UPDATE (p_payment_priority IN NUMBER,p_vendor_id IN NUMBER) AS
PRAGMA AUTONOMOUS_TRANSACTION;
ex_custom EXCEPTION;
PRAGMA EXCEPTION_INIT( ex_custom, -20001 );
BEGIN
UPDATE AP_SUPPLIER_SITES_ALL
SET PAYMENT_PRIORITY =p_payment_priority
WHERE VENDOR_ID = p_vendor_id;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
    raise_application_error( -20001, 'Error while updating payment priority on Site '||SQLERRM );
END XX_AP_SUPSITE_UPDATE;

Thanks for your replies Saubhik/VT,
now my trigger is compiled. but is not triggering. pl help me to resolve .....
create or replace
TRIGGER AUDIT_DEV.trg2
AFTER DELETE OR UPDATE OF EMP_STATUS ON AUDIT_DEV.AUDIT_PERSONS
FOR EACH ROW
declare
OSUSER varchar2(30);
     MACHINE varchar2(30);
     logon_time date;
db_user varchar2(30);
USERNAME VARCHAR2(30);
EMP_USER_MODIFIED AUDIT_PERSONS.EMP_USER_MODIFIED%TYPE;
     EMP_DATE_MODIFIED AUDIT_PERSONS.EMP_DATE_MODIFIED%TYPE;
     EMP_SK AUDIT_PERSONS.EMP_SK%TYPE;
     EMP_ID AUDIT_PERSONS.EMP_ID%TYPE;
     EMP_NAME AUDIT_PERSONS.EMP_NAME%TYPE;
EMP_RESIGNATION_DATE AUDIT_PERSONS.EMP_RESIGNATION_DATE%TYPE;
BEGIN
select     username,osuser,machine,logon_time into db_user,osuser,machine,logon_time from v$session where sid=(select sid from v$mystat where rownum=1);
INSERT INTO AUDIT_DEV.AUDIT_PERSONS_LOG (EMP_USER_MODIFIED,EMP_DATE_MODIFIED,EMP_SK,EMP_ID,EMP_NAME,EMP_RESIGNATION_DATE,EMP_STATUS_OLD,EMP_STATUS_NEW,osuser,db_user,machine)
VALUES(EMP_USER_MODIFIED,EMP_DATE_MODIFIED,EMP_SK,EMP_ID,EMP_NAME,EMP_RESIGNATION_DATE,:old.EMP_status,:new.EMP_status,osuser,db_user,machine );
COMMIT;
END;
09:59:06 AUDIT_DEV@dev>UPDATE AUDIT_DEV.AUDIT_PERSONS SET EMP_STATUS='TEST' WHERE EMP_ID='4234';
EMP_STATUS
TEST
1 row selected.
Elapsed: 00:00:00.01
10:00:03 AUDIT_DEV@dev>commit;
Commit complete.
Elapsed: 00:00:00.01
10:00:17 AUDIT_DEV@dev>select * from AUDIT_persons_log;
no rows selected
Elapsed: 00:00:00.00
10:00:17 AUDIT_DEV@dev>
Edited by: Abk on Nov 4, 2010 10:42 AM

HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Two problems with my iPhone: screen doesn't light up at notifications & iPhone says updated apps still need to be updated

Alright, I'm having two annoying problems with my iPhone. It's an iPhone 4.
I'm using the latest iOS.
The first problem is that when I get a notification (a mail, text message, whatever), I hear the sound that it makes, but the screen doesn't light up. Then, when I click the home or the turn-on / off button (basically when I'm in the lock menu), it doesn't show the notification either. Yet, in the notification settings, I've set up to show them. For example mails. I just received a few mails. For mail, I've selected the banner in the notification center. But I see no banner. I see nothing in fact. I can unlock my phone and go in mail, and see the mail there.
What could be the reason for this? I've recently done some changes on it, I mean, not exactly on the iPhone, but in iTunes. I removed all photos from my iPhone (over 3000) and all songs that were on it. I decided to sync only the latest 3 months of photos and 3 months of music. I don't think it's related but it's the last thing I've done with it, and since then this has been happening, so I thought I'd mention it.
My second problem is that, while I was updating my music and photo library on my iPhone, I also synced all app updates. I have around 6 or 7 of them, lurking there for a while, and I never got the time to download them in iTunes and sync them with my iPhone. So that's what I did as well. Strangely enough, when I visit the App Store app, under Updates, it still tells me I have 5 apps to update. I remember one I updated on the iPhone itself.
They're all listed there with the little bar that shows up when it's loading, except it isn't loading. It's just stuck there, at the very beginning. No, not even at the beginning, because the blue little bar that moves forward isn't even present.The also show up this way on my iPhone "desktop" (Home), and it says "Waiting..." below them.
I've tried syncing again, and also restarting the iPhone, but it didn't help. Anyone know what's wrong here?
I appreciate all help. Cheers guys

Nobody? The second problem is solved! But my phone still doesn't light up or shows a banner or anything when for example a mail arrives?

Installer update method changes every time i update an adobe product!

hello, it is REALY anoying, that the user have to set/chose the update method e.g. "Notify me to install updates" EVERY TIME you update adobe products!!! Because Adobe Installer resets these settings every time, they offer a new product update (adobe flash or adobe reader e.g.).
I dont wont to "Allow Adobe to install updates"!!! I only want to be notified about new updates! So I have to read every time the options again to choose the right option.
Another alternative would be to me, not to install product updates, but I think this is not what adobe wants the user should chose.
Best Regards,
Tom

What version of iWeb are you suing and what version of OS X?
You can try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

New iTunes & need for Safari Update, why do I need Safari!?

I absolutely HATE Safari, why do we need to install the latest version to be able to get into iTunes, or have it at all? This is why I do not trust updates "if it ain't broke don't fix it".
Seriously thinking of going elsewhere for my music needs and I have been loyal to the iTunes store since day one.

Thanks, just do not even want it taking up space on my computer. Took FOREVER to install in South America. Was not even worth it New iTunes user unfriendly.

Help needed for dynamic update form

I could really use some advice - I've been asked to build a time tracking application (basically a timesheet) and I have a fair bit done but the part I am really struggling with is the best way to accommodate some of the specifications. I am NOT a programmer (I have some coldfusion experience but nothing really advanced) so I have not managed to sucessfully integrate the various methods I've found on the web so far. The database is created and so are all the queries, and I have also written a cfc to handle the drop-down menu logic needed but I don't really know how to integrate it with the form.
Our production server has ColdFusion MX7 so all the great functionality in the CF8 examples I can't use.
The issue is the user should ideally be able to add/edit/delete multiple rows at once- I like CFGRID, and the HTML version seems best. The main issue with the Flash version is the scrolling to get to the insert/delete buttons- I couldn't see how to get rid of that. A separate add and edit form could be ok depending on how easy it is to use.
One problem I have is that I can't work out how to have default values with the grid (the userID which is a session variable, and the date which is constantly changing- there is a cfcalendar for the user to change date).
The biggest hurdle is the related select drop-downs I need- it's not quite as simple as the city,state,postcode examples. For the first drop down the pick an option- and for only 2 of those options there is a second drop-down. Anything else and it stops there. For the second drop-down, there are 2 options, and depending on which one of these they pick the 3rd drop-down pulls a query from one or another table in the database (2 entirely different things). The three options have different database tables. The main timesheet table just stores the id number from those tables (so I also need to display the names on the drop-down from the options tables not the number).
I played with simple and complicated javascript and coldfusion solutions as well, but because it's a form to update records and also because of the above specs I just couldn't get anything to work right. I tried binding with the cfc and nothing would bind, plus I don't know how to make all happen without a page reload.
Does anyone have any advice for the best approach to this? As I mentioned I've got tables, queries and even a cfc but I'm not too clear on how to put it all together properly within the constraints of MX7.
PS I also can't post a lot of code because of where I work- I know that's not helpful but am looking for the best approach to this, then I can work on the details. Right now I am jumping from solution to solution and not getting anywhere.

Well, a lot of code has come and gone because I couldn't make it work, where I'm currently at is:
<cfform name="updateform" id="updateform" action="#CurrentPage#?#CGI.QUERY_STRING#">
<cfgrid name="MainData" height="400" insertbutton="add" deletebutton="remove" query="getMainData" insert="yes" delete="yes" rowheight="20" selectmode="edit" format="html">
<cfgridcolumn name="id" display="no">
<cfgridcolumn name="userID" display="no">
<cfgridcolumn name="entrydate" display="no">
<cfgridcolumn name="activityID" >
<cfgridcolumn name="typeID">
<cfgridcolumn name="projectID" values="#ValueList(getProjects.id)#" valuesdisplay="#ValueList(getProjects.name)#">
<cfgridcolumn name="time" width="10">
<cfgridcolumn name="comment" width="150">
</cfgrid>
<cfinput type="hidden" name="entrydate" value="#Session.username#">
<cfinput type="hidden" name="entrydate" value="#editdate#">
<cfinput name="update" type="Submit" value="Update">
</cfform>
** for some reason getProjects.name doesn't work and causes an error. I haven't worked out how to get the default inputs for the date and user ID to work either. I also tried binding and a flash form somewhere along the way.
** the CFC is below, #ds# didn't work and I had to put in the actual DSN name, not sure why, but anyway this is the logic of the thing. Ideally I would like to use this logic with the cfgrid, but I'm not sure if that is possible? It seems like it would be the most user friendly approach.
The CFC so far is:
<cfcomponent>
   <cffunction name="getActivities" access="remote" returnType="query">
        <cfquery name="getActivities" datasource="#ds#">
SELECT * FROM timesheet_activities
</cfquery>
        <cfreturn getActivities>
    </cffunction>
    <cffunction name="getTypes" access="remote" returnType="query">
    <cfargument name="Activity" type="any" required="true">
    <cfif ARGUMENTS.Activity EQ "">
        <cfset getType = "">
    <cfelse>
        <cfquery name="getTypes" datasource="#ds#">
        SELECT * FROM timesheet_type
        </cfquery>
    </cfif>
    <cfreturn getTypes>
    </cffunction>
    <cffunction name="GetProjects" access="remote" returnType="query">
    <cfargument name="Activity" type="any" required="true">
    <cfargument name="Type" type="any" required="true">
    <cfif ARGUMENTS.Activity EQ "" OR ARGUMENTS.Type EQ "">
        <cfset LstProjects = "">
    <cfelseif ARGUMENTS.Activity EQ "1" OR "3">
    <cfquery name="getProjects" datasource="#ds#">
SELECT id,name FROM projectsa
WHERE completed = 'false'
</cfquery>
<cfelse>
<cfquery name="getEProjects" datasource="#dse#">
SELECT id,name FROM projectsb
WHERE statusID = '6'
</cfquery>
    </cfif>
    <cfreturn getProjects>
    </cffunction>
</cfcomponent>
Any attempts to actually use the cfc didn't work. I tried to use it with a normal html update form and got the message- failed to bind, Activity didn't exist. I also tried to bind it to a flash grid. The argument for Activity needs to come from the drop-down Activity type selected. Maybe I'm missing something.
ETA:
just moved everything to the live MX7 server (because my dev server is Coldfusion8) and I get the following:
Attribute validation error for tag CFGRID. The tag does not allow the attribute(s) BINDONLOAD,BIND.
Does this mean I definitely can't use the CFC with the cfgrid on MX7? Or is there a way to do it?
Any advice would be greatly appreciated.

[URGENT] BIOS Update .ROM file needed for G580

hii all
i have a lenovo G580 (2689) laptop i5-3210 DOS based model
Current Bios Version - 62CN39WW
i want to update my BIOS version as am unable to file it on the drivers/download section for my model.
if any one using the same Model of the laptop and using a updated version of BIOS then kindly extract/backup the BIOS using Universal BIOS Backup Utility http://forums.mydigitallife.info/threads/9856-Universal-BIOS-Backup-Toolkit
and kindly upload it in some hosting and provide me the .ROM files created by the BIOS Backup Toolkit
i need a later version for my present BIOS possibly 62CN41WW or any thing later than 62CN39WW
any help would be highly appricated....waiting eagerly for somebody's help

Hello
Tecra A3 is pretty new unit and it will be interesting to know why you want to make BIOS update. Is there any problem with it?
Which BIOS update doesnt run, windows or traditional one? If you have no serious problem, dont do it at all.
The issue with your multidrive is a little bit confused for me. Which software you should install?

"Direct Delta" Update Method - Why need for Collective update

Similar Messages

Maybe you are looking for