Direct i/o configuration error

On the vms that i am trying to enable vmfex on, I am getting this error on all the vms. I already have memory resevation and the required bios policy needd for passthrough to work. any idea?

any idea what the queue values should be for the vmware passthrough policy? This is what i am using currently which i got from this guide
http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns944/basic_troubleshooting_vm_fex.html
but still getting the error

Similar Messages

Laptop crashed, moved HDD to another PC to use CS5 but it gives me a Configuration Error. Error:6

Hi, My laptop containing Adobe CS5 recently crashed. I do not have the serial as this was activated at my school and they only do it once for everyone. What I did was to take the HDD out and put it onto my PC and try to use the application from there, a method which worked before on other applications, but when I wanted to load up dreamweaver and any other applications in the suite it failed to load and popped out the following message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Configuration Error
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of the screen.
Error:6
http://www.adobe.com/support/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Can anyone help me out? I don't have the serials nor the CD to reinstall so I'm practically stuck and I cant afford to buy the thing again.

Adobe applications simply don't work that way. Installation puts software and configuration information not only in application-specific directories under \program files\, but also in system directories. As such, Adobe application installations are not portable.
Unfortunately, in order to re-install your software, you will need to go back to your “school” for installation media and serial number information since the software was licensed through them and not directly via Adobe.
- Dov

Jboss/tomcat mapping configuration error

I can't even get the combination to serve a .jsp file or .html file. Regardless of the URL that I attempt, I only get a No Context configured to process this request error from tomcat and INFO [Engine] StandardHost[localhost]: MAPPING configuration error for request URI from JBoss. I've tried to access all of the various webapps under the catalina directory and can't get to any of them. I know that catalina is started because the log file shows
<Service name="JBoss-Tomcat">
<Engine name="MainEngine" defaultHost="localhost">
<Logger className="org.jboss.web.catalina.Log4jLogger" verbosityLevel="trace" category="org.jboss.web.localhost.Engine" />
<Host name="localhost">
<Valve className="org.apache.catalina.valves.AccessLogValve" prefix="localhost_access" suffix=".log" pattern="common" directory="../server/default/log" />
<DefaultContext cookies="true" crossContext="true" override="true" />
</Host>
</Engine>

<Connector className="org.apache.catalina.connector.http.HttpConnector" port="8080" minProcessors="3" maxProcessors="10" enableLookups="true" acceptCount="10" debug="0" connectionTimeout="60000" />
</Service>
</Server> in jboss.web:service=EmbeddedCatalinaSX
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Creating
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Created
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] Done with create step of deploying tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.MainDeployer] start step for deployment file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 DEBUG [org.jboss.deployment.SARDeployer] Deploying SAR, start step: url file:/D:/JBoss3.0/jboss-3.0.0_tomcat-4.0.3/server/default/deploy/tomcat4-service.xml
2002-06-12 23:29:44,760 INFO [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Starting
2002-06-12 23:29:44,760 INFO [org.jboss.deployment.MainDeployer] Adding deployer: org.jboss.web.catalina.EmbeddedCatalinaServiceSX@7dadcd
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina debug level to: 0
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.home to: ../catalina
2002-06-12 23:29:44,760 DEBUG [org.jboss.web.catalina.EmbeddedCatalinaServiceSX] Setting catalina.base to: ../catalina
with no errors. I'm confused because I was able to consistently work with previous versions of JBoss with no problem. The configuration seems to have changed radically, is this some recent change that I just can't find a reference to? Thanks for any help.

Hi
For Tomcat 3.x you need to use one of the following options:
(Note: this is with JBoss/Tomcat OR JBoss/Jetty)
Place you .war files in the following location:
C:\jboss-3.0.3\server\default\deploy and the app is automatically available.
If my app's name is DavidOnline.war, when deployed, I can access it at
http://localhost:8080/DavidOnline..
OR
Copy your entire development directory to the deploy direction above, RENAME your
directory from say C:\JspApps to C:\JspApps.war and you can work from that location and see your changes immeadiatly.
There is a file called jboss-service.xml that has some config options, also for the Tomcat bundle there is a file named tomcat-service.xml that has the standard server.xml section.. I suggest you check out the JBoss website, free docs and forums.. http://www.jboss.org.
Thanks, Hope this helps.

Importing configuration error

Hi,
I am hoping that someone might be able to point me in the right direction to resolve an error (see below) we are getting when trying to import a configuration file into our test system. I have truncated the message due to size restrictions of posts.
Any help is much appreciated.
regards
Julian
====================================================================
= Root Exception ===================================================
====================================================================
Thrown:
com.sap.aii.utilxi.misc.api.BaseRuntimeException:    Check 0: FINEST Activation of the change list canceled
   Check 1: FINE [],Check result for Communication Channel | TST010 | DEV010_Proxy (DirContext)
     at com.sap.aii.ib.gui.tools.transport.ContentImportProgressDialog.executeConcurrentAction(ContentImportProgressDialog.java:444)
     at com.sap.aii.utilxi.swing.toolkit.ConcurrentProgressDialog$ProgressDialogRunnable.run(ConcurrentProgressDialog.java:251)
     at com.sap.aii.utilxi.misc.thread.ThreadPool$ThreadPoolThread.run(ThreadPool.java:392)
Caused by: com.sap.aii.ib.core.transport.api.PostprocessingException:    Check 0: FINEST Activation of the change list canceled
   Check 1: FINE [], Check result for Communication Channel | TST010 | DEV010_Proxy (DirContext)
     at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)

Hi Julian,
.I should clarify that the import process fails...
After transporting your configuration object u need to check the objects and enter the mandatory fields and then try to activate.hope you will not get the error after doing this.
Cheers!!!
Chichili.

Muse 2014 configuration error 5

After installing Muse CC 2014 I get Configuration error 5
when I launch the application.
As directed I uninstalled Muse and re-installed
- only to get the same error.
I'm on a iMac - OS 10.8.5
Any suggestions?

Hello Zak
It failed at approx. 83% but didn't give a specific error message
other than "Errors encountered during installation"
All of the other apps have updated without an issue
Bill
On Wed, Jun 25, 2014 at 1:03 PM, Zak Williamson (Adobe) <

Configuration error:16 CS5.5 Design Standard on Mac

Hi I have just encountered this configuration error:16. I bought the software in Sept 2011. I transferred it from my iMac to a new Macbook Pro in Nov 2012. It has been working fine up until now. Please help - I have URGENT deadlines to meet!

Thanks for your reaction. This is helpfull. I have an additional question for my correct understanding.
Do I have to buy the Windows update first and than do the platform change, or can I directly order the update to CS6 as a Mac version?
Thank in advance for your reaction.
With kind regards,
René

Configuration error 5 - I can't reinstall

I've recently bought a new mac mini, and I used migration assistant to copy everything from my old mac mini via time machine.
I had to put in the serial number again for Photoshop but that has worked fine since.
I'm having trouble though with InDesign as it won't go past the error message "configuration error"
I can't reinstall from the disc as there is no disc drive in the new mac mini and it wouldn't accept a third party CD drive.
Is there anything I can do?

Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools
If you have a suite, download the suite installer. Follow the directions on the page exactly or it will not work.

Configuration error 213:5 encountered. Suggested permissions fix ineffective.

I've changed the permissions to the PCD and Store folders as directed. The error message remains. Any suggestions? Running OS X Yosemite 10.10.2 8GB RAM Macbook Pro 17 inch.

Also to confirm you have completed the steps listed in Configuration error 16 | CC, CS?

Unable to build patched VIM+VIM-Shell / Configure Error with ncurses

VIM-Shell : http://www.wana.at/vimshell/
VIM : http://www.vim.org/download.php#unix
Trying to install and test VIM-Shell with the 7.0 patch against the official VIM sources downloaded from 'the unix directory' under version 7.x, but can't get past a configure issue.
Following the directions at under VIM-Shell > Installation, I've run the following:
$ tar jxf vimshell1.0vim7.0.patch.bz2
$ cd vim70
$ bzcat ../vimshell1.0vim7.0.patch.bz2 | patch -p0
However, ./configure spits out the following:
checking --with-tlib argument... empty: automatic terminal library selection
checking for tgetent in -lncurses... no
checking for tgetent in -ltermlib... no
checking for tgetent in -ltermcap... no
checking for tgetent in -lcurses... no
no terminal library found
checking for tgetent()... configure: error: NOT FOUND!
You need to install a terminal library; for example ncurses.
Or specify the name of the library with --with-tlib.
$ locate libncurses returns the following:
/Applications/VLC.app/Contents/MacOS/modules/libncurses_plugin.dylib
/Developer/Platforms/Aspen.platform/Developer/SDKs/Aspen1.2.sdk/usr/lib/libncurs es.5.4.dylib
/Developer/Platforms/Aspen.platform/Developer/SDKs/Aspen1.2.sdk/usr/lib/libncurs es.dylib
/Developer/Platforms/AspenSimulator.platform/Developer/SDKs/AspenSimulator1.2.sd k/usr/lib/libncurses.5.4.dylib
/Developer/Platforms/AspenSimulator.platform/Developer/SDKs/AspenSimulator1.2.sd k/usr/lib/libncurses.5.dylib
/Developer/Platforms/AspenSimulator.platform/Developer/SDKs/AspenSimulator1.2.sd k/usr/lib/libncurses.dylib
/Developer/SDKs/MacOSX10.4u.sdk/usr/lib/libncurses.5.4.dylib
/Developer/SDKs/MacOSX10.4u.sdk/usr/lib/libncurses.5.dylib
/Developer/SDKs/MacOSX10.4u.sdk/usr/lib/libncurses.dylib
/Developer/SDKs/MacOSX10.5.sdk/usr/lib/libncurses.5.4.dylib
/Developer/SDKs/MacOSX10.5.sdk/usr/lib/libncurses.5.dylib
/Developer/SDKs/MacOSX10.5.sdk/usr/lib/libncurses.dylib
/opt/local/lib/libncurses++.a
/opt/local/lib/libncurses++w.a
/opt/local/lib/libncurses.5.dylib
/opt/local/lib/libncurses.a
/opt/local/lib/libncurses.dylib
/opt/local/lib/libncursesw.5.dylib
/opt/local/lib/libncursesw.a
/opt/local/lib/libncursesw.dylib
/opt/local/var/macports/software/ncurses/5.6_0/opt/local/lib/libncurses++.a
/opt/local/var/macports/software/ncurses/5.6_0/opt/local/lib/libncurses.5.dylib
/opt/local/var/macports/software/ncurses/5.6_0/opt/local/lib/libncurses.a
/opt/local/var/macports/software/ncurses/5.6_0/opt/local/lib/libncurses.dylib
/opt/local/var/macports/software/ncursesw/5.6_1/opt/local/lib/libncurses++w.a
/opt/local/var/macports/software/ncursesw/5.6_1/opt/local/lib/libncursesw.5.dyli b
/opt/local/var/macports/software/ncursesw/5.6_1/opt/local/lib/libncursesw.a
/opt/local/var/macports/software/ncursesw/5.6_1/opt/local/lib/libncursesw.dylib
/usr/lib/libncurses.5.4.dylib
/usr/lib/libncurses.5.dylib
/usr/lib/libncurses.dylib
and re-running $ ./configure --with-tlib='/usr/lib/libncurses.dylib' gets me this:
checking --with-tlib argument... /usr/lib/libncurses.dylib
checking for linking with /usr/lib/libncurses.dylib library... configure: error: FAILED

You also need vim-7.0-extra.tar.gz, which is in
ftp://ftp.vim.org/pub/vim/extra
tar jxvf vim-7.0.tar.bz2
tar zxvf vim-7.0-extra.tar.gz
cd vim70
bzcat ../vimshell1.0vim7.0.patch.bz2 | patch -p0
./configure
make
But it seems the patch file has a bug; it introduces a wrong '#endif' into gui.c. If make fails at gui.c, just remove the '#endif' (line 2422).

Configuration error -- airport admin utility

I'm stuck and hoping someone here might be able to help me. I have a new AirPort Extreme 802.11n and when I open the airport admin utility, a "Configuration Error" message appears telling me that "This version of Airport Admin Utility does not support this base station..."
What's worse is that there is only a "Continue" button, and it does not work (i.e. does not do anything, including dismiss the message box).
I installed the software that came with the router, but I get this error on both my MBP and my iMac.
I've tried selecting the check box that says "No longer warn me for this base station", but I am still unable to dismiss this message. The fact that this message won't go away means I can't access the panel behind it to actually configure the router. The message is not modal but also not draggable, so although I can access some fields, I can't access the fields directly underneath the message.
This is so frustrating -- please help!

Hi James,
The installation disk that came with your AE installed two programs to your Utilities folder. One is Airport Utility. The other is Airport Disk Utility.
The Airport Administration Utility was already on your machine, and that only works with previous Airports. Go back again and click to open Airport Utility and you should be fine.

Configuration error 213:19

I just downloaded and installed Dreamweaver CS 6 and when I try to launch the software, I receive a Configuration error 213:19. How do I fix this?
Please advise...thanks!

This usually implies there's a licensing problem. Assuming you got CS6 directly from Adobe.com and not an illegitimate source, try right-clicking on your DW desktop icon and select Run as Administrator.
Nancy O.

How do I fix a Configuration Error on MacBook Pro?

I have a MacBook Pro 2.4 GHz Intel Core i5 with 8 gigs of memory. I was running CS6 and my video board went out. I got it fixed but lost all my data on my hard drive. So I tried installing cs6 from a disk image that I had saved and after entering the serial code I received that my license was revoked. That could be true since I was at another company when I purchased it. Now I'm trying out the TRIAL Adobe cloud solution and after installing and getting updates, when i clicked on the app I get a configuration error when trying to open the . Do I need to delete some library items that are conflicting when I tried to install CS6?
Here is the error:
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5

Imjoewalkerid the file permissions on your SLStore folder have become compromised. Please see Configuration error 16 | CC, CS for information on how to resolve Error 213:5.

Configuration Error 213:19 Adobe PhotoShop CC when sequenced using Microsoft App-V 5.0

Does anyone out there have a Microsoft App-V 5.0 recipe for Adobe PhotoShop CC ?
When I run the App-V package, I get the License Configuration Error 213:19
Thank You. very much for your time. Karl

You will probably get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Configuration error when open admin tool in BIEE 11g client

Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AM

Hi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx,

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Direct i/o configuration error

Similar Messages

Maybe you are looking for