Directory conflict while installing a package
Hi,
I made one package with makepkg, but when I try to install it, I get error saying that one directory ( X11/lib/fonts) already exists.
I can overcome this error by specifying packman -A "f" <pkg_name>
Is ther eany other clean method ?
Regards,
Abhay
Showing us your pkgbuild would be nice ;-)
Similar Messages
-
Getting below mentioned error while installing a package in the windows 2012 server remotely through psexec command
Error 1718. Windows Installer Service could not be accessed.
The same msi is getting installed local in through when we are doing through manually
Please help on the sameHi Rahulan,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
Just addition, please refer to following threads and check if can help you.
The Windows Installer Service could not be accessed.
error 1719 windows installer service could not be accessed ....
Hope this helps.
Best regards,
Justin Gu -
Have a problem while installing Asmlib packages
hi all
I have some problem while installing ASMlib packages.
my OS=Redhat linux 5.3
kenel version using this command uname -r=2.6.18-128.el5
I have downloaded packages and successfully installed following 4
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
but while installing following got error
rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
thanx in advanceI think you just need below rpms to configure asmlib:
oracleasm-support-2.1.7-1.el5.i386.rpm
oracleasmlib-2.0.4-1.el5.i386.rpm
oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
Read this thread:
Error install ASMLib on RedHat linux -
[SOLVED] Possible failure while installing a package
I was installing KDE for my definite Arch install and the monitor turned off. Nothing new, but after about 10 minutes I pressed an arror key to turn it on and a package that was downloading got possibly stoped. It looked like this:
package-x.xx 14.06 MB [#############-----------] 71%
package-x.xx 24.12 MB [##################] 100%
I'm not sure why an arrow key would stop the download (if it actually did).
Could someone tell me if it actually is a problem?
Regards,
Amarildo.
Last edited by Amarildo (2013-09-24 02:19:49)Amarildo wrote:package-x.xx 14.06 MB [#############-----------] 71%
package-x.xx 24.12 MB [##################] 100%
Well, continuing to look at your pseudo output -- let us analyze what you have told us.
Here is some real output
ewaller$@$odin ~ [1]1009 %sudo pacman -Syu
[sudo] password for ewaller:
:: Synchronizing package databases...
testing 20.1 KiB 193K/s 00:00 [###################] 100%
core 105.4 KiB 329K/s 00:00 [###################] 100%
extra 1441.8 KiB 566K/s 00:03 [###################] 100%
community-testing 4.5 KiB 750K/s 00:00 [###################] 100%
community 2010.0 KiB 538K/s 00:04 [###################] 100%
multilib-testing 908.0 B 0.00B/s 00:00 [###################] 100%
multilib 107.9 KiB 325K/s 00:00 [###################] 100%
:: Starting full system upgrade...
warning: librsvg: local (1:2.39.0-1) is newer than extra (1:2.37.0-1)
warning: libsecret: local (0.16-1) is newer than extra (0.15-2)
resolving dependencies...
looking for inter-conflicts...
Packages (36): elfutils-0.156-1 fakeroot-1.20-1 geoip-1.5.1-1
ibus-1.5.4-1 imagemagick-6.8.6.10-1
jdk7-openjdk-7.u40_2.4.2-1 jre7-openjdk-7.u40_2.4.2-1
jre7-openjdk-headless-7.u40_2.4.2-1 lib32-dbus-1.6.14-1
lib32-elfutils-0.156-1 lib32-sqlite-3.8.0.2-1
libcacard-1.6.0-4 libmariadbclient-5.5.33-1 links-2.8-1
linux-3.11.1-2 linux-docs-3.11.1-2 linux-headers-3.11.1-2
m4-1.4.17-1 man-pages-3.54-1 mariadb-5.5.33-1
mariadb-clients-5.5.33-1 mono-3.2.3-1
network-manager-applet-0.9.8.4-1 networkmanager-0.9.8.4-1
python-setuptools-1.1.6-1 python2-mako-0.9.0-1 qemu-1.6.0-4
rtkit-0.11-3 seabios-1.7.3.1-2 serf-1.3.1-2 systemd-207-5
systemd-sysvcompat-207-5 tcl-8.6.1-1 tk-8.6.1-1
vte-common-0.34.8-1 vte3-0.34.8-1
Total Download Size: 218.47 MiB
Total Installed Size: 796.40 MiB
Net Upgrade Size: 3.42 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages ...
libcacard-1.6.0-4-x... 40.5 KiB 158K/s 00:00 [###################] 100%
^[[B libmariadbclient-5.... 348.4 KiB 357K/s 00:17 [-------------------]
^[[B libmariadbclient-5.... 3.3 MiB 610K/s 00:05 [#########----------]
^Cibmariadbclient-5.... 5.8 MiB 610K/s 00:01 [################---] 89%
Interrupt signal received
ewaller$@$odin ~ [130]1010 %
Note that your output is clearly a fabrication. It does not have the download data, and the units for megabytes are different.
Regardless, note that I've two lines with 'libmariadbclient-5'. Lo and behold, it did continue. Just like your fictitious 'package-x.xx'
Last edited by ewaller (2013-09-24 02:31:12) -
RepositoryException while installing a package
Hi,
I am facing following error message during save process while installing or uninstalling a package -
Error: javax.jcr.RepositoryException: Unable to getNode: org.apache.jackrabbit.core.state.ItemStateException: Failed to read bundle: 1a27c665-ebfc-429f-a550-e1e07baa0f86: java.lang.NullPointerException
Could someone please provide inputs on how to resolve this. I saw following thread which is also related to the same issue:
http://forums.adobe.com/thread/1132835
This suggests to change property for the node, but I am not able to figure out which node has problem. Any inputs related to this would be helpful.Failed to read bundle: 1a27c665-ebfc-429f-a550-e1e07baa0f86: java.lang.NullPointerException mean there is some repository coruption and based on your solution it looks like version is corrupted. Try to recreate version index /crx-quickstart/repository/version/index* and see if that helps. See also if [1] helps
[1] http://www.wemblog.com/2011/11/how-to-fix-file-not-found-issue-in-crx.html
Yogesh -
Problem while installing Setup package
Hi all,
A week before i installed setup package on one device it worked perfectly fine.
Today i created new setup package with parameter sets( MI_CONFIG and included parameter MobileEngine.Sync.Gateway.Service=/sap/bc/MJC/mi_host
MI.Sync.ProtocolVersion=251500
And did not added these two lines in Mobileengine.config file.
My device is looping between two screen Ie Logon screen and change password screen. Whenever i enter the username and password it enters into Change password screen and then again to logon screen.
What can be the problem?
Thanks and Regards
Neha KapoorHi Neha
This is because after after you have created a setup package, a configuration tells the user to change his password on this first login to the client. If you open the MobileEngine.config file you will find an entry called <i><b>MobileEngine.Security.PasswordChangeRequired</b></i> with a value true. Just set the value to false and restart MI. If the parameter is not present, add the same and restart. This should solve your problem and the change password page will never appear again.
Best Regards
Sivakumar -
Error while installing a packaged application
Hi
I am getting the following error while trying to install the "Sample Master Detail" application in my apex oracle account on the web. All the others install without problem. What could it be ?
Thanks
Juan
Execution of the statement was unsuccessful. ORA-00001: unique constraint (APEX_040200.WWV_FLOW_MESSAGES_IDX1) violated
declare
h varchar2(32767) := null;
begin
h:=h||'Help';
wwv_flow_api.create_message (
p_id=>2456294651379654494 + wwv_flow_api.g_id_offset,
p_flow_id=>wwv_flow.g_flow_id,
p_name=>'HELP',
p_message_language=>'en',
p_message_text=>h);
null;
end;
ORA-00001: unique constraint (APEX_040200.WWV_FLOW_MESSAGES_IDX1) violatedHilary - I asked our DBA to open a SR, the number is SR 3-6553142501 : Unable to install packaged applications in Oracle Apex
Looks like apex.oracle.com has been upgraded to 4.2.1. When did this happen?
I am almost positive that I was able to install packaged apps on apex.oracle.com even when it was on 4.2.0.00.27 (same as the publicly available version) but not on my instance. But now since the versions are different, the support person is pointing to the different versions as a cause! This is what I was afraid of. To be honest, given that I was getting the error on my instance but not on apex.oracle.com, even when both systems (mine and apex.oracle.com) was on the same version of APEX, I am not very hopeful that the 4.2.1 patch will fix my situation since the root cause has not been identified. I just don't want to wait for 4.2.1 to be released, apply it and find out that the issue is still there. Can you share the list of bugs fixed in 4.2.1 to see if any of them may apply to this situation?
Any other ideas? What diagnostics can I provide to help you get to the bottom of this? Frankly, Oracle Support, as I found in the past, is not very well qualified to resolve APEX-related SRs. Can you please assist or direct Support appropriately? Thanks, appreciate your help.
Since I have the Builder app installed in my instance, I inspected the final page of the packaged app install wizard (4000:83) to see what APIs it uses and ran it manually as SYSTEM. This is what I get. Does that help narrow down the issue?
SQL> alter session set current_schema=apex_040200;
Session altered.
SQL> exec wwv_flow_pkg_app_install.install_db_app(7050,'SCOTT');
BEGIN wwv_flow_pkg_app_install.install_db_app(7050,'SCOTT'); END;
ERROR at line 1:
ORA-20987: APEX - Execution of the statement was unsuccessful. ORA-01003: no
statement parsed
<pre>begin wwv_flow.g_import_in_progress := true; end;</pre> - ORA-01003: no
statement parsed
ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 853
ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 888
ORA-06512: at "APEX_040200.WWV_FLOW_PKG_APP_INSTALL", line 376
ORA-06512: at line 1 -
Directory issue while installing software oracle on oel5.5
Hi ,
iam trying to install oracle10gr2 on OEL 5.5 for this iam following :-------
http://kamranagayev.wordpress.com/2010/04/25/video-tutorial-installing-oel-and-oracle-10gr2/
but in my case when i run ./runInstaller it takes my ORACLE_HOME as
u1/oracle/oracle/product/10.2.0/db_1 then i browse it and make it as u1/oracle/product/10.2.0/db_1 .... then i start with installation and when it is been prompted to logged in as root and execute the script first one i execute....... the second where it has been shown i.e cd $ORACLE_HOME/ when i execute iam not taken into db_1 directory....
i know iam going some where wrong so can u pls rectify me or tell me where am i going wrong.....
Regards & Thanks
KavitaAs oracle user, You can set environmental variables.
If it is fresh install, you can set oracle environmental variables using the following way:
$ . oraenv
ORACLE_SID [orcl] ? orcl
the following will list the environmental settings for oracle user:
$ env | grep ORA
As far as root is concerned, it is not aware of ORACLE_HOME path. So, you should manually include the path to execute the script.
# /u01/oracle/product/10.2.0/db_1/root.sh
Hope this helps
Regards,
Murali Mohan -
Errors encountered while installing EBS 11.5.10.35 on Windows XP Pro
I have been trying to install 11i on my desktop running Windows XP Pro SP2 follwoing another thread by naveed27c. I can pass all the pre-installation check but the same error messages always come up when I reach step 2 of 5. The short version of the error message is like this:
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
There are more in the log but it is too long and I hate to copy all of them here.
I don't know what causes the problem. Within the preparation process there are a few steps where I am not sure that I have done correctly. I guess one or all of them could cause troubles.
1. In his thread, naveed27c mentioned the need to "opt for Register Environment Variables while installing VC++", but I don't see such an option while installing the package.
2. When setting path to include c:\cygwin\bin, I can add it and see it using echo %path%. But once I close the command window and reopen it, echo %path% does not return c:\cygwin\bin anymore. Also, I can't find c:\v98\bin, but c:\v98\vc\bin. Shall I add c:\v98\vc\bin to be included in PATH?
3. My hosts file is like this:
127.0.0.1 localhost ben.oraclef.com
192.168.1.11 ben.oraclef.com
I added "oraclef.com" as the Primary DNS Suffix at both places (Computer Name and Network Connections. I can ping both "ben.oracle.com" and "ben".
Are the above settings correct?
4. When installing 11i, I entered the following in Express Configuration Information screen:
MKS directory=c:\cygwin\bin
MSDEV directory="c:\v98" (Here, shall I put "c:\v98\vc\bin"?)
Domain=oraclef.com
I am the only user and administrator. Do I need to create extra users?
I do apologize for this lengthy message. But I am so desperate to install this software. I would GREATLY appreciate your help.Hi hsawwan,
I have added c:\cygwin\bin to the path following your instruction and can see it in a command window.
Tried to install 11i again just now but failed again. It is a clean system, I reitaled the OS. Got Microsoft Visual C++ 6 from Microsoft Visual Studio 6.0. While installing I chose to install VC++ only to c:\v98. Also installed Service Pack 6. After that I can see c:\v98\bin in the path.
Downloaded CYGWIN and installed the selected components to c:\cygwin. HOWEVER, I can not find the specified "diffutils".
In the 11i Express Configuration I filled the following:
MKS directory=c:\cygwin\bin
MSDEV directory=c:\v98
Domain=oraclef.com
I added "oraclef.com" as the DNS suffix. My hosts file looks like this:
127.0.0.1 localhost ben.oraclef.com
192.168.1.11 ben.oraclef.com
I can ping both ben and ben.oraclef.com
Here are the error messages I got:
[b]There was an error while running the command - c:\oracle\visdb\9.2.0\temp\VIS_ben\adrun9i.cmd APPS APPS
There is no such global user or group: BEN\XXXX.
There is no such global user or group: XX.
More help is available by typing NET HELPMSG 3783.
c:\oracle\visdb\9.2.0\temp\VIS_ben\adrun9i.cmd APPS APPS has succeeded
Step 1 of 5
Command: c:\oracle\visdb\9.2.0\temp\VIS_ben\adrundb.cmd
Processing Step 2 of 5
Executing: c:\oracle\visdb\9.2.0\temp\VIS_ben\adrundb.cmd APPS APPS
Where XXXX is my first name and XX stands for my last name. I am the only user and also the administrator of my desktop.
In addition, I got the following error:
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
I apologize for bothering you again. Please give me some light on how to resolve these errors. -
Add-on Conflict error while installing add-on LOCIN release 100
Hi experts,
I want to install the add-on for India Localization for IS-Utilities i.e., LOCIN release 100. I have downloaded the add-on and also the CRT(SAPK-10001INLOCINISU) required for the add-on.
we got an error while installing the add-on it is
"OCS package SAPK-10001INLOCINISU does not match the current software component vector"
if we remove the CRT from the queue and start the installation then it will give add-0n conflict error.
Conflicts Between Add-On LOCINISU 100 and Support Packages
Component Release Support Package Information on
Conflict Resolution
FI-CA 600 SAPK-60004INFICA Include CRT
SAPK-60005INFICA Include CRT
SAPK-60006INFICA Include CRT
SAPK-60007INFICA Include CRT
SAPK-60008INFICA Include CRT
SAPK-60009INFICA Include CRT
SAPK-60010INFICA Include CRT
Plz tell the solution for this.Hi,
I had somthng like this recently with SCMEWM....
1. Clear out your EPS/in directory
2. Download the latest version of the add-on and all the patches ===> the latest CRT's will be in the patches.
3. Unpack them and try import again.
Also if you have not seen or read:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=950513
Mark -
Packages error while installing Oracle Management Agent.
Hi,
We have configured the oracle grid on our production server.
Now we also want to include all other database on situated on different server.
So we are installing oracle management agent software.
while installiing this software we encounterd following error:
Exception in thread "main" java.lang.Unsatisfied LinkError :/tmp/OraInstall2011-05-04_10-05-58PM /jre/1.4.2/lib/i386/libawt.so :libXp.so.6 :cannot open shared object file:
No such file or directory.
Please help me as this is urgent.
Regards,
MilanYou need to install libXp package.
The rpm which contains this package is libXp-1.0.0-8.i386.rpm. It is located in the /server direrctory of the OS install DVD. You copy this rpm from the DVD and install it using
# rpm -ivh libXp-1.0.0-8.i386.rpm
or if you have setup yum or up2date repository:
yum install libXp.i386 -
While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayubTry the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj -
Error while installing iplanet directory server 5.0
Hi I am trying to install iPlanet directory server 5.0 on my local machine.My computer name doesnot contain any domain name.it is simply like "ERT3210".
While installing Directory server it is asking for the computer name and if i give the computer name without domain it is not accepting.And i am unable to rename my computer name suffixing domain name as it is not contained in any domain..Now How can i give the computer name to install directory server?.Its very urgent for me.It will be great help if any one give reply.Start/Stop Directory Server and Start/Stop Admin Server are usually present in My Computer/Manage/Services, just start or stop the service.
Assuming the install root directory is %LDAP_ROOT%
You could always create program icons for
1) start/stop dirrectory server
%LDAP_ROOT%\slapd-%COMPUTERNAME%\start-slapd.exe
%LDAP_ROOT%\slapd-%COMPUTERNAME%\stop-slapd.exe
2) start/stop admin server
%LDAP_ROOT%\start-admin.exe
%LDAP_ROOT%\stop-admin.exe
3) SUN ONE Console (iPlanet Console)
%LDAP_ROOT%\startconsole.exe
Gary -
Hi Team,
I am trying to restore/design few SSRS reports in my PPS Dashboard Designer 2013. On my process I got the error "Failed to load the appropriate report editor" and to rectify it I tried installing the SqlSysClrTypes.msi on my machine (32 bit). But
while installing, got the error "The Installation package is not supported by this processor type". kindly help me in getting link for downloading the correct version on the add-on.
Thanks,
-ArsathTry below msi
http://download.microsoft.com/download/B/6/3/B63CAC7F-44BB-41FA-92A3-CBF71360F022/1033/x86/SQLSysClrTypes.msi
http://social.technet.microsoft.com/Forums/lync/en-US/dab8767e-92a0-4cee-aad8-1e216084acfa/getting-error-on-installation-of-sqlclrtypemsi-on-windows-server-2008-r2-64-bit-machine?forum=ocsclients
install the sqlsysclrtype.msi for sql server 2012
http://stackoverflow.com/questions/14991693/created-msi-but-get-installation-package-is-not-supported-by-this-processor-type
If this helped you resolve your issue, please mark it Answered
Maybe you are looking for
-
Problem in Form personalization of FA module of Quick Additions
Hi Experts, Version : 12.1.1 I am doing a form personalization in Quick additions of FA module. I have registered a concurrent as PL SQL procedure. The procedure updates the asset number as per our requirement once the asset gets added. To achieve th
-
Flex 4.7 AIR 16.0 SDK invalid signature
I Am trying to publish a beta version of my app to Apple to leverage TestFlight testers but I keep getting an Invalid Signature error. Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc cert
-
Update Mode and CATT Mode in BDC
Hi Experts, when we start the recording then we pass the following steps.. 1.Recording Name 2. Trasaction Code 3. Update Mode-------*Local *Synchronous *Asynchronous 4.CATT Mode------*No Cat
-
When I click on a item in the google searchlist, google doesn't open the site! Google always redirects to google itself!
-
I have only been with BT Broadband for a few days now but I'm finding that the speeds are completely unacceptable and it doesn't matter what time of the day it is I just took a speed test and this my result: http://www.speedtest.net/result/743430514.