Directory created in UCCX server \Program Files\wfavvid\Prompts\user\en_US\ disappears

Hello,
Has anyone experienced this before? In my UCCX server, I have some sub-directories in the folder \Program Files\wfavvid\Prompts\user\en_US\ with prompts. I just restarted the Cisco Unified CCX Engine service, and the directory and prompt files disappeared! I did it again just to make sure (created directory in that path and restarted the service again, and that directory is gone after the service comes back.)
I'm running UCCX Premium 7.0(1)SR05_Build504
Thanks,
-Dave

That's not a bug, it's a feature.
You cannot just go to the Prompts folder on the CCX filesystem and place your prompts there in whatever directory structure you'd like to. CCX will always restore the directory structure which is stored in its database after engine restarts.
You need to use the CCX administrative interface to create prompts dir structure, and upload the prompts there.
If you don't want to go over this hassle, you can also create a directory structure on the file system OFF the CCX Prompts folder, but you'll have to make sure in the scripts you'll have to reference your prompts a little bit differently. Instead of saying P[somedir\someprompt.wav] in the Play Prompt step, you'll have to first do a Create File Document with the full pathname and filename of the prompt file, and then do the Play Prompt step referencing the document created by the previous step. Here is what I use:

Similar Messages

Create the missing server.xml files yourself

Paula and I created the missing server.xml files ourselves. The script is at the bottom of the post.
We badly needed the missing server.xml files to work on the customizations and Oracle was unable to solve this problem.
"I checked on our Automated Release Updates System found that we dont have server.xml that includes PosDelivSchedVO. This confirms that there is no patch available at present to provide you with this file.
As this is not related to coding issue,Support will not be able to log a bug with Development. You may log an Enhancement Request via Metalink, so that Development would review your requirement and if feasible would include this file at the time of future releases"
#!/bin/sh
# This script is used to generate the missing server.xml files for $JAVA_TOP/oracle/apps/pos
# Usage: server.sh
# Note: This script has many hardcoded codes and it may generate the wrong server.xml.
# The manual fixes to the generated server.xml may be need.
# Check the codes before you use it.
# It's possible to write a generic version of this script to deal with more issues, like
# 1. dealing with the Oracle apps patches applied
# 2. only generates the missing server.xml files automatically
# 3. can specify the module, like pos or po ..., to generate server.xml.
# 4. including only the OA Framework objects used.
# 5. correctly generate the right "encoding"
# Luke Chi
APP=pos
PKG_HEAD=oracle.apps.$APP
PKG_TAIL=server
SERVER_FILENAME=server_1.xml
cd $JAVA_TOP/oracle/apps/$APP
# for SUB_DIR in asn isp lov product rcv sbd ship administration changeorder jar planning profile registration schema servic
es suppreg
for SUB_DIR in asn lov product rcv ship administration planning profile schema services suppreg
do
echo $SUB_DIR
cd $SUB_DIR/server
PKG=$PKG_HEAD.$SUB_DIR.$PKG_TAIL
cat << EOF > $SERVER_FILENAME
<?xml version="1.0" encoding='WINDOWS-1252'?>
<!DOCTYPE JboPackage SYSTEM "jbo_03_01.dtd">

<JboPackage
Name="server"
SeparateXMLFiles="true"
EOF
echo " PackageName=\"$PKG\" >" >> $SERVER_FILENAME
ls *.xml | grep -v server*.xml | while read FILE
do
BASENAME=`basename $FILE .xml`
cat << EOF >> $SERVER_FILENAME
<Containee
Name="$BASENAME"
FullName="$PKG.$BASENAME"
EOF
for TYPE in AM EO VL VO AO
do
BASENAME_2=`basename $BASENAME $TYPE`
if [ $BASENAME_2 != $BASENAME ]; then
case $TYPE in
AM) echo " ObjectType=\"AppModule\" >" >> $SERVER_FILENAME ;;
EO) echo " ObjectType=\"Entity\" >" >> $SERVER_FILENAME ;;
VL) echo " ObjectType=\"ViewLink\" >" >> $SERVER_FILENAME ;;
VO) echo " ObjectType=\"ViewObject\" >" >> $SERVER_FILENAME ;;
AO) echo " ObjectType=\"Association\" >" >> $SERVER_FILENAME ;;
CO) echo " ObjectType=\"Luke_CO\" >" >> $SERVER_FILENAME ;;
*) echo " ObjectType=\"Luke_UNKNOWN\" >" >> $SERVER_FILENAME ;;
esac
break
fi
done
echo " </Containee>" >> $SERVER_FILENAME
done
echo "</JboPackage>" >> $SERVER_FILENAME
grep Luke $SERVER_FILENAME
if [ $? -eq 0 ]; then
mv $SERVER_FILENAME server_error.xml
fi
pwd
cd ../..
done

We loaded the Oracle seeded BC4J components from mid-tier file system to jdev OA Framework using the server.xml files generated by our Unix script attached in the privious posting above. We ,then did the customizations and successfully deployed them to our test Oracle apps.

No Managed folder created in under C:\Program Files\Common Files\CrystalDe.

Hi All,
I installed Crystal report 9 developer edition on web server but I found I don't have any Crystal report related DLL in assymbly folder and not managed folder created under C:\Program Files\Common Files\CrystalDesion\2.0\ folder.
My server running .NET Framework 1.1.
Any help appriciated.
Thanks
Anil

CR 9 has been out of support for way too long. I don't remember the directory structure for CR 9. What is hte issue you are actually getting?
Was the framework installed after or before CR 9?
Ludek
Edited by: Ludek Uher on Mar 11, 2010 6:57 AM

AIR 2.0 Create folder in C:\Program Files\ in windows 7

Hi,
We have a problem in creating a folder and a file inside C:\Program Files\ in this path in windows 7 and Windows vista.Is it possible to create a folder here.How to give elevated permission to my air application(administator previlage to the application). Is it possible in adobe air2.0 Adobe team please have a look into this issue.
Thanks.
Jayagopal P.S

I'm not an Adobe person, but based on my knowledge of Vista/7 permissions, the only way to give your app the elevated permissions is to right-click and run the app (each time) "as administrator". Windows purposefully doesn't allow apps to permanently be flagged as having administrator permissions. If you are cooking an exe yourself, there is a way to tell Windows that your app requires admin permissions on each run, but your user will still have to click past the prompt each time. But since AIR is creating the .exe, I doubt there is a way to set that flag so that your app prompts for admin permissions. Silly question I know, but are you absolutely sure you need to be storing files or folders here? Windows takes great pains to prevent apps from doing that now...

HT1923 This article contains the only thing that worked for me. I also had to sign out of iCloud and uninstall it. Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, and Users.

This article contains the only thing that worked for me. I also had to sign out of iCloud and uninstall it. Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, Program Data and Users. My iPhone 4 will now sync with iTunes both in its USB-connected mini dock and over Wi-Fi. It's unfortunate (negligent programming on the part of Apple?) that the upgrade to iTunes 11 did not remove all of those files as part of the upgrade process.

I am having the same issue....Same address for years - same as USPS - I tried 5 times (3 macs and 2 iPhones) and now i have 5 CHARGES for 1.00 each on my credit card. I took the credit card info off so they don't charge me anymore. How can they charge me yet still not allow me to download free updates and say I have an invalid address? I'm sure I will spend weeks or months trying to get a credit out of these incompetent idiots.

Creating Drop Down or Option selection for prompt user input.

Hello,
I wanted to know how can I create a drop down menu that has predefined values? I have the prompt user input vi. When it says enter voltage..i want the user should be able to select from a drop down menu values..also is it possible to have a predefined set of values from which a user can select...say 5 values are displayed and user selects one of them each time the vi is run...can this be realized..kindly help.
Thanks.
Ravi

Hi Ravi,
you can use a text ring or a menu ring control located on the Ring and Enum on the control pallete.
for a pre defined value you can edit that control to have what ever values you want from the user to input.
You can change the menu option by right clicking on the ring control and choosing Edit items from the list and use the values you want.
Regards,
Nitin

IDOC-FILE {A new Line auto Created at app server in file after mapping }

Hi.
        In my 2/3 objects based on Idoc to file scenario.
        when i send idoc... ( having n entries )
        and
        the created file at recieciving system has n records but
        problem is that a new line is inserted after n records.
       Can u suggest where i done mistake.
thanks.
Sridhar.

Hey
they there is some substructure which has .endSeparator as 'nl'
moreover we dont need to give .endSeparator for main structure at all.
<main>
<substructure>
<name>----</name>
</substructure>
</main>
here even if u give substructure.endSeparator as 'nl'.then also a new line will be generated in the end.
you can give substructure.endSeparator as comma(,).and new line won't be generated
thanx
ahamd

UCCX 7 wav files and languages

I'm in the midst of trying to configure IPIVR 7.0 for IPCC, and to get the basic config working I wanted to write a simple play prompt script on the IVR, should be asy I thought. However, all I get is the automated 'system problems' WAV file played and not my prompt. I end up with the following error in the MIVR log file:
118348: Mar 31 19:46:35.724 BST %MIVR-LIB_MEDIA-3-PROMPT_ERROR_IGNORED:Prompt error ignored: Exception=com.cisco.prompt.UndefinedPromptException: user prompt 'C:\Progra~1\wfavvid\Prompts\user\en\C:\Program Files\wfavvid\Prompts\user\en_GB\HPwelcome.wav'
118349: Mar 31 19:46:35.724 BST %MIVR-LIB_MEDIA-3-EXCEPTION:com.cisco.prompt.UndefinedPromptException: user prompt 'C:\Progra~1\wfavvid\Prompts\user\en\C:\Program Files\wfavvid\Prompts\user\en_GB\HPwelcome.wav'
The WAV file is pulled from my 3.5 system and plays fine there.
I think this is somehow wrapped up with the way I have the languages set up and the directory structure but I'm failing it to work it out. Can anybody point me in the right direction please as this is now getting very frustrating!
I also have the ICM subsystem in PARTIAL_SERVICE but I assume this is not related, it was running fully at one point. What's the best log file and log parameters to enable to see what's going on here?
Thanks
jed

Thanks Aaron, that's useful to know then. Is it something I can fix too ... an error in my script?
The other errors I have seen on occasions, possibly regulalry, are:
140827: Mar 31 18:35:21.994 BST %MIVR-LIB_MEDIA-3-PROMPT_ERROR_IGNOREDrompt error ignored: Exception=com.cisco.prompt.UndefinedPromptException: Local media channel might be released, the codec is 0; nested exception is:
com.cisco.audio.WrongAudioFormatException: Unsupported payload type: 0
WrongAudioFormatException
This doesn't looks too promising .. is this more likely my error? I'm not sure how consistent this error is yet as I have played witha lot of settings today so the picture isn't crystal clear just yet. This is for a WAV file that was either fine in 3.5 or I copied from the system repository and renamed as a test.
Jed

File transfer, read write through sockets in client server programming java

Hello All, need help again.
I am trying to create a Client server program, where, the Client first sends a file to Server, on accepting the file, the server generates another file(probably xml), send it to the client as a response, the client read the response xml, parse it and display some data. now I am successful sending the file to the server, but could not figure out how the server can create and send a xml file and send it to the client as response, please help. below are my codes for client and server
Client side
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.BufferedReader;
import java.io.DataInputStream;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileWriter;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.PrintWriter;
import java.net.InetAddress;
import java.net.Socket;
import java.net.UnknownHostException;
public class XMLSocketC
     public static void main(String[] args) throws IOException
          //Establish a connection to socket
          Socket toServer = null;
          String host = "127.0.0.1";
          int port = 4444;
          try
               toServer = new Socket(host, port);
               } catch (UnknownHostException e) {
            System.err.println("Don't know about host: localhost.");
            System.exit(1);
        } catch (IOException e) {
            System.err.println("Couldn't get I/O for the connection to host.");
            System.exit(1);
          //Send file over Socket
        //===========================================================
        BufferedInputStream fileIn = null;
          BufferedOutputStream out = null;
          // File to be send over the socket.
          File file = new File("c:/xampp/htdocs/thesis/sensorList.php");
          // Checking for the file to be sent.
          if (!file.exists())
               System.out.println("File doesn't exist");
               System.exit(0);
          try
               // InputStream to read the file
               fileIn = new BufferedInputStream(new FileInputStream(file));
          }catch(IOException eee)
               System.out.println("Problem, kunne ikke lage fil");
          try
               InetAddress adressen = InetAddress.getByName(host);
               try
                    System.out.println("Establishing Socket Connection");
                    // Opening Socket
                    Socket s = new Socket(adressen, port);
                    System.out.println("Socket is clear and available.....");
                    // OutputStream to socket
                    out = new BufferedOutputStream(s.getOutputStream());
                    byte[] buffer = new byte[1024];
                    int numRead;
                    //Checking if bytes available to read to the buffer.
                    while( (numRead = fileIn.read(buffer)) >= 0)
                         // Writes bytes to Output Stream from 0 to total number of bytes
                         out.write(buffer, 0, numRead);
                    // Flush - send file
                    out.flush();
                    // close OutputStream
                    out.close();
                    // close InputStrean
                    fileIn.close();
               }catch (IOException e)
          }catch(UnknownHostException e)
               System.err.println(e);
        //===========================================================
        //Retrieve data from Socket.
          //BufferedReader in = new BufferedReader(new InputStreamReader(toServer.getInputStream()));
          DataInputStream in = new DataInputStream(new BufferedInputStream(toServer.getInputStream()));
          //String fromServer;
        //Read from the server and prints.
          //Receive text from server
          FileWriter fr = null;
          String frn = "xxx_response.xml";
          try {
               fr = new FileWriter(frn);
          } catch (IOException e1) {
               // TODO Auto-generated catch block
               e1.printStackTrace();
          try{
               String line = in.readUTF();                    //.readLine();
               System.out.println("Text received :" + line);
               fr.write(line);
          } catch (IOException e){
               System.out.println("Read failed");
               System.exit(1);
        in.close();
        toServer.close();
public class XMLSocketS
      public static void main(String[] args) throws IOException
          //Establish a connection to socket
           ServerSocket serverSocket = null;
             try {
                 serverSocket = new ServerSocket(4444);
             } catch (IOException e) {
                 System.err.println("Could not listen on port: 4444.");
                 System.exit(1);
          Socket clientLink = null;
          while (true)
                    try
                         clientLink = serverSocket.accept();
                       System.out.println("Server accepts");
                         BufferedInputStream inn = new BufferedInputStream(clientLink.getInputStream());
                         BufferedOutputStream ut = new BufferedOutputStream(new FileOutputStream(new File("c:/xampp/htdocs/received_from_client.txt")));
                         byte[] buff = new byte[1024];
                         int readMe;
                         while( (readMe = inn.read(buff)) >= 0)
                         {     //reads from input stream, writes the file to disk
                              ut.write(buff, 0, readMe);
                         // close the link to client
                         clientLink.close();
                         // close InputStream
                         inn.close();
                         // flush
                         ut.flush();
                         // close OutputStream
                         ut.close();
                         //Sending response to client
                         //============================================================
                         //============================================================
                         System.out.println("File received");
          }catch(IOException ex)
          {System.out.println("Exception.");}
                    finally
                         try
                              if (clientLink != null) clientLink.close();
                         }catch(IOException e) {}
             clientLink.close();
             //serverSocket.close();
}

SERVER
import java.net.*;
import java.io.*;
public class XMLSocketS
      public static void main(String[] args) throws IOException
               //Establish a connection to socket
           ServerSocket serverSocket = null;
             try {
                 serverSocket = new ServerSocket(4545);
             } catch (IOException e) {
                 System.err.println("Could not listen on port: 4444.");
                 System.exit(1);
          Socket clientLink = null;
              try
                         clientLink = serverSocket.accept();
                     System.out.println("Server accepts the client request.....");
                     BufferedInputStream inn = new BufferedInputStream(clientLink.getInputStream());
                         BufferedOutputStream ut = new BufferedOutputStream(new FileOutputStream(new File("c:/xampp/htdocs/received_from_client.txt")));
                         byte[] buff = new byte[1024];
                         int readMe;
                         while( (readMe = inn.read(buff)) >= 0)
                         {     //reads from input stream, writes the file to disk
                              ut.write(buff, 0, readMe);
                         ut.flush();
                         //Sending response to client
                         //============================================================
                         BufferedInputStream ftoC = null;
                         BufferedOutputStream outtoC = null;
                         // File to be send over the socket.
                         File file = new File("c:/xampp/htdocs/thesis/user_registration_response.xml");
                         try
                              // InputStream to read the file
                               ftoC = new BufferedInputStream(new FileInputStream(file));
                         }catch(IOException eee)
                         {System.out.println("Problem reading file");}
                         // OutputStream to socket
                         outtoC = new BufferedOutputStream(clientLink.getOutputStream());
                         byte[] buffer = new byte[1024];
                         int noRead;
                         //Checking if bytes available to read to the buffer.
                         while( (noRead = ftoC.read(buffer)) >= 0)
                              // Writes bytes to Output Stream from 0 to total number of bytes
                              outtoC.write(buffer, 0, noRead);
                         outtoC.flush();
                         //============================================================
                         System.out.println("File received");
          }catch(IOException ex)
          {System.out.println("Exception.");}
                    finally
                         try
                              if (clientLink != null) clientLink.close();
                         }catch(IOException e) {}
             clientLink.close();
             //serverSocket.close();
      }CLIENT SIDE
import java.io.*;
import java.net.*;
public class XMLSocketC
          @SuppressWarnings("deprecation")
          public static void main(String[] args)
               // Server: "localhost" here. And port to connect is 4545.
               String host = "127.0.0.1";
               int port = 4545;
               BufferedInputStream fileIn = null;
               BufferedOutputStream out = null;
               // File to be send over the socket.
               File file = new File("c:/xampp/htdocs/thesis/sensorList.xml");
               try
                    // InputStream to read the file
                    fileIn = new BufferedInputStream(new FileInputStream(file));
               }catch(IOException eee)
               {System.out.println("Problem");}
               try
                         System.out.println("Establishing Socket Connection");
                         // Opening Socket
                         Socket clientSocket = new Socket(host, port);
                         System.out.println("Socket is clear and available.....");
                         // OutputStream to socket
                         out = new BufferedOutputStream(clientSocket.getOutputStream());
                         byte[] buffer = new byte[1024];
                         int numRead;
                         //Checking if bytes available to read to the buffer.
                         while( (numRead = fileIn.read(buffer)) >= 0)
                              // Writes bytes to Output Stream from 0 to total number of bytes
                              out.write(buffer, 0, numRead);
                         // Flush - send file
                         out.flush();
                         //=======================================
                         DataInputStream in = new DataInputStream(new BufferedInputStream(clientSocket.getInputStream()));
                         BufferedWriter outf = new BufferedWriter(new FileWriter("c:/xampp/htdocs/received_from_server.txt",true));
                         String str;
                         while(!(str = in.readLine()).equals("EOF")) {
                              System.out.println("client : Read line -> <" + str + ">");
                              outf.write(str);//Write out a string to the file
                              outf.newLine();//write a new line to the file (for better format)
                              outf.flush();
                         //=======================================
                         // close OutputStream
                         out.close();
                         // close InputStrean
                         fileIn.close();
                         // close Socket
                         clientSocket.close();
                    }catch (IOException e)
                    {System.out.println("Exception.");}
     Could you please point where am I doing the stupid mistake, client to server is working properly, but the opposite direction is not.
Thanks

How to Compile & Deploy the Java Concurrent Program File

Hi,
There is a requirement to create the Java Concurrent Program in Oracle eBusiness. I am able to create the Java Concurrent Program file. But unable to do the following things:
1.Since it is custom file, which location I will deploy the file?
2. How to compile the file?
3. In the execution file path and executable file name what should I specify for JCP?
Please guide me.
Thanks

Please see (How to register and execute Java Concurrent Program ?in Oracle Applications R11i ? [ID 186301.1]) for the complete steps (i.e. define concurrent program and add it to the request group, .etc.) -- This is also applicable to R12.
You may also see:
Classpath Setting of Third Party Jar Files in R12 Java Concurrent Program (JCP) [ID 1292694.1]
Integrating Custom Applications with Oracle Applications [ID 176852.1]
Java Concurrent Program FAQ [ID 827575.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Program&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Multi-threaded server programming

Hello, I meet a problem and don't know how to solve it: I have created a multi-threaded server program which receives multiple users from their own PCs. The server program receives users'commands and echo it back to all users who are currently connecting to my server. I store every clientSocket connecting to my server into a vector. My question is: how the server broadcasts a user command to other users? And how the server knows to which user he will echo the command to since the hostName and port number are the same to every user currently connecting to my server? Thanks a lot.

You should look at extending the Socket class to encorporate user details. Either use what peter suggested or make the user pass a username (or something) when they connect.
When you want to broadcast to all users just enumerate through your vector and send each one the command. If you mean the user performs a task on their application and you want to produce the same results in all the other users apps then its down to you to code it. When user1 clicks on a button the app must send a command (eg. a string) to the server which sends the same string to all other users. When the user receives this string it performs some task.
Is that what you mean?
Ted.

Client Server program using Applets for client

Creating a client server program using Applets for the clients.
Having problems distrubting the message from client to client
using ObjectOutputStreams/ObjectInputSteams.
I can connect each client to simple server and respond with by writting
the i/o stream of each client but unable to communicate from client to client. If any one out there has in tips of creating a class of objectOutputStreams that holds a array of ObjectOutputStreams and then broadcasts the message to every client, it would be much appreciated
Thanks.

Cheers poop for your reply
I never explained the problem properly. What it is I am trying to set up a Client Server program using Applets as the clients GUI. The problem is broadcasting the message to multiply client connnection(s).
Below is code, each client can connect and send message to the server. The problems is broadcasting the message to every client connection. The every client can input a message but only the last connected client can receive the message?????? Thanks in advance..
/*this my server class */
import java.io.*;
import java.net.*;
public class Server extends JFrame
private static final int ServerPort=8080;
private static final int MaxClients=10;
private ObjectOutputStream output=null;
private ObjectInputStream input=null;
private BroadCastMessage broadcastMessage;
public void runServer()
BroadCastMessage broadcastMessage= new BroadCastMessage();
try
{ //connect to server
ServerSocket s = new ServerSocket(ServerPort,MaxClients);
     //listen to port 5000 for new connections
     ///max is 25
     System.out.println("Server listening on port "+ServerPort);
while (state.isProgramRunning())
     try
     /// sGUI.waitForConnection();//new line
     s.setSoTimeout(100);
     //enable times in server-socket
     while (true)
     Socket incoming = s.accept();
     //wait and accept connnections from serverSocket
     //instance of the class,pases the new connection and message
     //spawn as a thread
     SocketConnection connection=new SocketConnection(incoming,broadcastMessage);
     Thread a = new Thread(connection); a.start();
     System.out.println(state.getConnectionCount()+"Connection received from :"+incoming.getInetAddress());
     catch(InterruptedIOException x){}
while (state.getConnectionCount()>0);
System.exit(0);
}catch (IOException e){}
public static void main(String[] args)
Server s =new Server();
     s.runServer();
/*this is my socket connection thread*/
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
public class SocketConnection implements Runnable
private ObjectOutputStream out;
private ObjectOutputStream output=null;
private ObjectInputStream input=null;
private BroadCastMessage passOnMessage;
private Socket theConnection=null;
private String Inmessage="";
private int Ocount;
public SocketConnection(Socket caller,BroadCastMessage broadcastMessage,Ocount)
theConnection =caller;///(5000,n)
Ocount=ncount;
passOnMessage=broadcastMessage;
public void run()
try
getStreams();
processConnection();
catch(Exception e)
{String clientDetails=("connection from IP Address: "+theConnection.getInetAddress());}
private synchronized void getStreams() throws IOException
{ //get streams to send and receive data
//set up output buffer to send header information
///Ocount++;
//create new objectoutputstream
output=passOnMessage.getOutputObject(output,theConnection,Ocount);
///flush output buffer to send header info.
Ocount++;
//set up input stream for objects
input =new ObjectInputStream(
theConnection.getInputStream());
System.out.print("\nGot I/O streams\n");
private synchronized void processConnection()throws IOException
//process connection with client
String Outmessage =" count : "+status.getConnectionCount();
//send connection successful message to client
     Outmessage=Outmessage+"SERVER>>>Connection successful";
     output.writeObject(Outmessage);
output.flush();
do ///process messages sent from client
     try
     Inmessage = (String) input.readObject();
     System.out.println(Inmessage);
     /* //while the connection is open each line
     that is passed from the client to the server
     is read in and is displayed*/
     messageDetails.setMessage(Inmessage);
     String CurrentMessage=messageDetails.getMessage();
     //output.writeObject(CurrentMessage);
     // output.flush();
     passOnMessage.FloodMessage(CurrentMessage);
     //sending out the message
catch(ClassNotFoundException classNotFoundException){}
}while (!Outmessage.equals("CLIENT>>>TERMINATE"));
/*this my attempt at broadcasting the message to all clients
my thinking was that you could create a array of objectoutputstreams
which in turn could be broadcasted(bit confussed here)*/
import java.io.*;
import java.net.*;
public class BroadCastMessage /// implements Runnable
private int count;
private String Inmessage="";
private ObjectOutputStream temp=null;
private ObjectOutputStream[] output = new ObjectOutputStream [12];
//temp level of array of objects
public BroadCastMessage()
count=0;
public synchronized void FloodMessage(String message) throws IOException
System.out.print(count);
     for(int i=0;i<count+1;i++)
     try
{ System.out.print(count);
     output[count].writeObject(message);
     output[count].flush();
     catch(IOException ioException)
{ioException.printStackTrace();}
     notifyAll();
public ObjectOutputStream getOutputObject(ObjectOutputStream out,Socket caller,int Ocount)
try
{ temp = new ObjectOutputStream(caller.getOutputStream());
     AddObjectOutputStream(temp,Ocount);
////FloodMessage();
     catch(IOException ioException)
{ioException.printStackTrace();}
return temp;
public void AddObjectOutputStream(ObjectOutputStream out,int Ocount)
{ ///add new object to array
count=Ocount;
output[count]=out;
System.out.print("\nthe number of output streams : "+count+"\n");
}

How to share under "program files"

I haven't been able to successfully share anything under my "program files" folder with other computers on my home network. I can share other folders that I create, but nothing under "program files". All I get is the option for "advanced sharing", which doesn't help because it requires me to select users and such. I need to be able to let anyone on my home network see the folders/files without having to login as a specific user.

Right-click Program Files > Properties > Sharing Tab > Advanced Sharing > Share this folder > Apply, OK > Close.
To unconditionally share, you have to change the security permissions to allow Everyone access. Right-click Program Files > Properties > Security Tab > Edit > Add and type ‘Everyone’ (not the quotes) into the box and OK. Tick the boxes next to
the permissions you want to allow (e.g. Read or Write, etc.) then Apply > OK, etc. You may see some screens coming up with message 'An error occurred while applying ……..'. This is not unusual and can be ignored by clicking Continue.
Well, Mr. BurrWalnut..
You need to re-address this problem, that may have worked for Win7 when it first came out, but all I can see is the above hasn't worked since XP....!!!
Clipbrd

The distribution agent failed to create temporary files in 'C:\Program Files\Microsoft SQL Server\110\COM' directory. System returned errorcode 5.

One of my replication job failed with below error, which means job failed because of permission issue on the folder. To resolve that, I have granted the permission and it started working fine. Now the question is as my job was running fine since long time
without any issue then how suddenly the permission of the folder got omitted automatically? I am sure that no one deleted the permission from the folder and as the server is part of SQL cluster no failover occurs.
Error:-The distribution agent failed to create temporary files in 'C:\Program Files\Microsoft SQL Server\110\COM' directory. System returned errorcode 5.
Rahul

Hi Rahul,
Error code 5 indicates that the error is "access is denied." Please make sure that the COM folder is excluded from any antivirus scan that occurs on the system.
If the issue still persists, I recommend you use
Process Monitor to find out a bit more about the accounts and access requests involved. Then grant write permission to the exact COM folder for the account that is running the SQL Server Agent service. For more details, please review the following similar
thread.
http://www.sqlservercentral.com/Forums/Topic1364832-1550-1.aspx
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.

I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

Directory created in UCCX server \Program Files\wfavvid\Prompts\user\en_US\ disappears

Similar Messages

Maybe you are looking for