Directory database consistency/repair check tools

hi,
my understanding is that the directory uses ldbm database backends for the changelog and diretcory dtaabase files? is this correct?
if so are there any consistency/repair checking tools available to use on these? (apart from doing db2ldif dumps etc)
thanks

Sun DS 5.1 uses Sleepycat (Berkeley) DB version 3.3.x.
I'm not sure if Sun provides db consistency checking tools. They might be in the DSRK. I suppose you could download the free source code from sleepycat and build them yourself.

Similar Messages

Check Database Consistency

Dear All,
i m trying to run Check Database Consistency through DB13,i m getting following error.
Unable to start execution of step 1 (reason: The
ob step contains one or more tokens. For SQL Serv
r 2005 Service Pack 1 or later, all job steps wit
tokens must be updated with a macro before the j
b can run.). The step failed.
i m runing SAP ecc5 On SQL 2005 SP1.
Please advice how to resolved this error.
Thanks & Regards,
Hiten Modi

Ok, I don't know much about MS SQL. Really.
But just looking for "step contains one or more token" in the SDN search brought up this note:
[SAP Note 947702 DB13 - DBCC Checkdb job fails in SQL 2005 SP1|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_db/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393437373032%7d]
Why does apparently no one ever tries this before posting a question?
cheers,
Lars

UME consistency check tool

Hello
Iam running on EP6 Sp14.
can anybody tell me where I can find the UME consistency check tool on portal and how to run the tool.
Is there any risk of losing the data if i run the tool.
Thanks,
Master.

Hi,
Oh, that's relatively easy: Go to service.sap.com/swdc, Download -- Support Packages and Patches -- Entry by Application Group -- SAP NetWeaver -- SAP NETWEAVER -- SAP NETWEAVER 04 -- Support Package Stacks -- Support Package Stacks -- Target Stack: 16 -- Source Stack: 14 -- Usage: EP (& maybe TREX) -- choose plaforms -- Download all files.
See note 844093 and the referenced guide for details how to de-car the files, how to put them together and for details about starting sapinst etc.
If you are upgarding to SP16, don't forget to patch KMC to Patch 3.
Hope it helps
Detlev
PS: Patching 14 to 16 (WAS/EP/KM/TREX, if this is needed completely) takes about 6 hours, 2 hours WAS, 2 hours EP, 1 hour KM and 1 for TREX; much depending on your machine, of course...

Transaction code to repair/check objects

Hello
Can somebody remind me transaction code to repair/check objects in BW?
Thanks

hi
you can use rsrv. it is for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.

What does a package database consist of?

What does a package database consist of? can any one give me complete description.

Hi,
This is Prabhuram Devar,
A package database consists of:
/var/sadm/pkg: This is a directory containing one directory entry for every package installed on the system.
/var/sadm/pkg/<packagename>/pkginfo
/var/sadm/pkg/<packagename>/save/<patchid>/undo.Z for the backout packages.
/var/sadm/pkg/<packagename>/save/pspool/<packagename>: A sparse package that is used for non-global zone install.
/var/sadm/install/contents: This file has an entry for every file in the system that has been installed through a package. Entries are added or removed automatically using the binaries installf and removef.

Database consistency issue..

Hi.
SCCM 2012 English, RTM
For unknown reason the DR link broke between CA and primary.
It says Site Replication status both way Active, but data replication is mixed. Parent to child Global data - failed and child to parent site data failed. Child to parent global - Active. Replication link analyzer performs several checks and then informs
- Database consistency issues detected for site XXX. (parent). Skiping rule - shows different replication groups which are failed. I tried to replicate those, but nothing changed.(according to following article last step)
http://blogs.msdn.com/b/minfangl/archive/2012/05/16/tips-for-troubleshooting-sc-2012-configuration-manager-data-replication-service-drs.aspx
Any more ideas?

Now i have read more about DRS and SCCM 2012 and get in state where 2 from 3 replications are active.
Mainly with puting relevatnt pub files to RCM.BOX. But global data replication from CAs to PRI is still failed. No idea ....
More related articles:
http://blogs.technet.com/b/sudheesn/archive/2012/10/21/drs-initialization-in-configuration-manager-2012.aspx
http://anoopcnair.com/2012/06/20/sccm-configmgr-2012-site-to-site-replication-sql-data-replication-service-replication-configuration-management-sql-service-broker-replication-groups-and-manual-sync/
And one more thing - do not know it is related or not
Severity Type Site code Date / Time System Component Message ID Description
Error Milestone XXX 12/14/2012 10:34:29 AM server.domain.local SMS_POLICY_PROVIDER 620 Microsoft SQL Server reported SQL message 547, severity 16: [23000][547][Microsoft][SQL Server Native Client 10.0][SQL Server]The INSERT
statement conflicted with the FOREIGN KEY constraint "ResPolicyMap_PolicyAssignment_FK". The conflict occurred in database "CM_XXX", table "dbo.PolicyAssignment", column 'PADBID Please refer to your Configuration Manager documentation, SQL
Server documentation, or the Microsoft Knowledge Base for further troubleshooting information.
It is jaming replication ? and how fix DB inconsistency detected by Replication Link analyzer ?

RE: UNABLE TO FIND DATABASE TABLE FOR CHECK NO, IN ISU

HI,
CAN ANY BODY TELL ME DATABASE TABLE FOR CHECK NO IN ISU.
THANKS,
SARANG

hey sarang
i will tell u a short cut to know vat is the table for all ur desired fields,
just enter a worng value in the particular filed.. and then u can see a error message displayed like the follwing example
entry 01 not found in table erro1
just try giving wrong values for check number..and just enter
then u will get a error message with the table information..
check wthere this trick works in ur system
kr
prince

DPM 2007/2010 Health Check Tools

Hi there,
I've had a look through the existing forum threads, but am unable to find an answer to my query.
I am looking to find a range of DPM health check tools, or Powershell Scripts, that would help me perform a Health Check on a 2007 environment, with a view to an eventual upgrade path to 2010/2012
I am hoping to avoid analysing each event ID and every backup operation in order to make a report to management.
Many thanks in advance
Rory

Hi,
This is the only DPM Health Check script available. Here is the link:
https://gallery.technet.microsoft.com/DPM-Health-Check-9628e68f
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Where can I download Group Policy Health Check Tool v.1.0?

I once saw a screenshot of this tool (Group Policy Health Check Tool v.1.0) from some document. However, when I search on line for it, it looks like this tool simply does not exist. Can someone help me?

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

I'm having a problem with FF forgetting Username & Passwords to occasional sites, checked Tools options which is set correctly.

Hi
Twice this last few days, on different sites, FF3.6.10 has forgotten well used Usernames and passwords. First time it re-learnt after manually sign in.
Second time FF totally refuses to learn the Username and Password for the site. Tried 3 times after checking Tools>Options
Not blocked via site exceptions
Privacy> Clear history when FF closes>Settings>Data> PSWD NOT set
Thanks
Mike

Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
If the latter happens then you have a problem with cookies that are not kept or the file that stores the cookies is corrupted.
* Websites remembering you and automatically log you in is stored in a cookie.
* You must allow that cookie (Tools > Options > Privacy > Cookies: Exceptions), especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
See also http://kb.mozillazine.org/Websites_report_cookies_are_disabled

Aggregate check tool

Hello All,
I trying to set the aggregate check everytime there is a load so that we dont have to worry about data integrity. Now I have gone through all the notes that tells me about the aggregate check tool. I tried doing this and it allows me to select the complete check with change run and then also allows me to select the aggregate. Now when i come to the screen of the transfer option , i click on it and it says cannot make changes to repository and shows me the display mode. This is in a production system, so the system is locked down. Is there a way around this to set this withouth opening up the system.
Any answers are greatly appreciated.
thanks
amit

I've used the aggregate check tool a little in or test environment but not in P. Haven't had problems with aggregates generally. Is this a result of problems or more of a precaution. Some of the aggregate check processes can take a while to run, its essentially like refilling your aggregeate and then comparing it to another copy.
At any rate, I think the issue is that you are creating a variant for the program. So do you have the authority to create one in P? If not, sounds like you would have to transport. Might try using SU53 to see if it is an Authorization problem.

Oracle Database Audit Health Check

Hi Experts,
I have been looking for checklist to perform the oracle database audit.
what is the best practise to perfrom the database audit health check.
Regards
Mohammed. Abdul Muqeet

Hi,
What is it mean for Health Check, You mean you have audit enable in your database and you want to manage it. if so
then you have to take care of Audit area at OS level and sys/aud$ table
for Audit Area: you can schedule a job to clear that are time to time
for sys.aud$: Move this table to non- system tablespace and moniter the uage. can purge the data if not required after taking the backup..
HTH

Create a cloud database using an external tools of a CRM?

I would like to create a cloud database using an external tools of a CRM . To do this, I have to configure my TNS name with all the cloud database information’s also with the port.
Is the cloud service allows this ?
Maurice.

Hi Maurice -
No SQL*Net connections are allowed for the Database Cloud Service. This will be possible with the upcoming Database as a Service offering.
Hope this helps.
- Rick Greenwald

External directory database link for CME 4.0

Is it possible to link CME 4.0 with external phone directory database?
Thanks
AD

Yes, you can use an external database for your Corporate Directory on the ip phones, such as an enterprise LDAP directory. See the below link for more info:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_0/sys_ad/4_0_1/ccmsys/a04ldap.htm
Please rate helpful posts!

LMS Database consistency verification tool

Hello all,
I upgraded from LMS 3.1 to 3.2 yesterday. The upgrade went well, but DFM and Campus Manager didn't work afterwards.
After a few searches on the forum, and the help of a great Cisco TAC engineer, we were able to solve the PIDM database inconsistencies that were preventing DFM links from showing up. And Campus Manager needed a kick in the butt to start again it seems.
My PIDM table had many duplicate device ids, some registered to DFM 2.0 (on the previous server) and some registered to DFM 3.1 (current server). So it seems the previous upgrade (from 2.6 to 3.0 and then 3.1) had some bad entries.
My question for the pros is this : is there a tool that can be run against the LMS databases to check for inconsistencies like these ? Duplicate entries, wrong server names, application version, and other nasty stuff ?
My next chore is to move LMS from Windows 2003 to Windows 2008, but before I do that, I'd like to make sure the DB is clean
Thanks!
Alex.

No, there are no tools to verify data consistency. There is a tool to validate the file structure consistency of the database, but if the database is running, that is typically not an issue.
The PIDM table is the source of quite a few problems, but they are generally easy to sort out. If you have a good backup of your 2003 server data, I would say you can do the 2008 migration.

Directory database consistency/repair check tools

Similar Messages

Maybe you are looking for