Disable check and auto-download

I work in a locked down environment. Which is to say that the
end users do not have admin rights to any location on their
machines. I was given some legacy code that contains shockwave
(dcr) files and the associated files. I am attempting to run these
via a webserver. However, when the main HTML file launches to run
the content, it attempts to download and install the newest version
of the shockwave player. How do I disable this feature so it will
run with the company approved version?
Thanks,
Dwayne

If you need to disable the version check server side in the
HTML container and if you have some background in HTML here’s
a quick hack that might work although I haven’t personally
tried it myself:
1. In a scratch folder create a blank Director file with the
same stage size as the legacy dcr. If you’re not sure about
the stage size get the info from the <object> and/or
<embed> tags in the original HTML container.
2. Under the publish settings check HTML, click the shockwave
tab and lower the requirement to the approved version, then click
the HTML tab and select a template that does not perform a version
check … I think the default shockwave template will work.
Then click publish.
3. Copy the HTML container from step 2 into the same folder
as the live DCR and check to see if updates are still requested.
You might have to tweak some of the paths in the HTML to make sure
everything points where it should.
If step 3 works you have two choices, copy the non-shockwave
HTML content from the original to the new container, or copy the
<object><embed> block from the new container and paste
it into the original HTML. If you take the second option make sure
there are no VBscripts that might also force a plug-in update.
- Bob

Similar Messages

Syntax check and auto-format disagree

Flash 8 Pro: Well, I'm coding along quite nicely and decide
to auto-format. Auto-format says the code has errors, the syntax
check says there are none. I can run my code (though it's not doing
what I want) without getting an error.
Are there specific scenarios that cause the syntax check and
auto-format to disagree?
In just about every other development tool I've used, it will
auto format regardless of errors, even if the formatting is messed
up. it's a good aid to highlighting syntax errors! Why can't flash
do the same?
Thanks,
Paul

Well, after commenting out lots of code until the error went
away and then removing the comments and making some tweaks, the
problem has gone away..

If I have already gotten an app and I download it, and auto download apps is on my ipad, will I get it on my ipad?

I need to know because my ipad is running out of storage space and I don't want it to fill up with old apps but I wish to keep auto download on so don't say "turn auto download off"

Yes.

Ive been trying to update my macbook pro 8,2 firmware from the apple website but first the smc update gives me an error saying that my software does not support that update and belive me i checked and iam downloading the correct one

so basically i was wanting to update my smc firmware and the EFI Boot ROM version but for the EFI Boot Rom when i click on it says page no found and for the smc firmware, when i do download it says that the my software does not support it, even though it is completely compatible, i checked the system requirements given by the page.
iam trying to do this because i have issues with the chargin, it keeps giving me a "not charging" messege.
Help please...

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

IPhoto will no longer recognize my iPhone and auto download images since updates, help, I use this non stop for online business which has been halted

imac with latest updates / iphone 5 , worked previous to iphone recent update , had to rebuild the photo library first now it downloads nothing new when i plug in the phone to the imac

Try this possible fix:
Robin Johnson
This solved my questionRe: ios update problem - 7.1 11D167 iphoto not picking up new photos
Mar 20, 2014 7:15 AM (in response to JdinPa)
I figured out the fix for the Mac users having this problem. I connected my iPhone to my iMac and started iTunes. A dialogue came up in iTunes, I OK'd that and then OK'd the usual "Do you trust this Mac" that comes up on my iPhone.
Suddenly Image Capture launched itself and there were all my photos, ready to be downloaded.
As a workaround see if Image Capture can see and download your photos to a folder on the Desktop. They can be imported from there into iPhoto.
OT

Greek Spell Check and Auto-Correction

Hi, I want to know if I can add a Greek dictionary that will have the same features as the English Language has on Lion.
Why Apple didn't integrate such a simple thing. To make every user from different places in the world to have the convenience of Auto-Correction they have on iOS on OS X too. Greek Auto-Correction exist on iOS why not on Lion?

rioshorty wrote:
Hi, I want to know if I can add a Greek dictionary
Yes, see
http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html
Nobody can tell you why Apple hasn't included some feature that you want, but you can ask them for it here:
http://www.apple.com/feedback/macosx.html

1.4 plugin and auto-download

OK, the documentation (http://java.sun.com/j2se/1.4/docs/guide/plugin/developer_guide/autodownload.html) says a script is available ( http://java.sun.com/browser/autodownload.js) to force the browser to load the new plugin - problem is that script doesn't seem to exist ! All I get is a prompt for username/password, is this something else that I have to sign up for or is the url wrong ?
Rob

Thank you ArchHasher.
When I try to open the page "http://java.sun.com/browser/autodownload.vbs",I am asking for username and password.I wish to know which username and password is to be used there. Kindly inform me the same atonce.
Thanks in advance.

Cannot get new messages to download automatically and auto reply with out of office message have to manually check for new messages to get it to do this

I am using Mozilla Thunderbird 31.3.0. I know how to create a message filter to set up an auto reply message, but cannot get Mozilla to automatically download new message and auto reply with the message in the filter unless I manually check for new messages, that is the only way to make it work. I have looked online and can't seem to find an answer to this particular issue. According to anything that I have found, I have the correct boxes checked in server settings: check for new messages at startup, automatically check for new messages, check for new messages every x amount of minutes. It's one thing to have to leave my computer on and Thunderbird open to make this work, but to have to manually check for new messages to get the auto response to work defeats the whole purpose of having an auto reply, as I use them for vacations, holidays, etc. I have wondered if there are any security settings that are causing this issue, but if so, I don't know what changes to make to them. Thanks in advance for any help. This is driving me crazy.

I do find it a bit odd that Thunderbird is not getting mail on schedule, perhaps you have an add-on or anti virus program that prevents that.
Holding shift while you start Thunderbird will start with add-ons disabled to check if mail come automatically.
Airmail is right though, use Verizons auto responder. This link might help with that http://www.verizon.com/support/residential/internet/highspeed/account+tools/email+tools/questionsone/85621.htm#
You say that not having such a setting in Thunderbird is something that needs fixing. This idea comes on the whole because Outlook has such an option. what most people are not aware of it only works with Exchange server. There is no "vacation response" in server mail specifications so every server implements it differently.
Just as all cars have a radiator, you can not take any radiator and just put it in, they are subtly different even though they perform the same purpose. Same goes for the various vacation responders, They perform the same purpose but they differ between email server software brands.
Thunderbird leaves it to the server end to expose the functionality, as they are really the only ones who understand what they did. Outlook exposes the option and mostly greys it out.

BBPSC04_ Disable auto conf and auto inv from SC check status

Hello,
I would like to disable the auto confirmation and auto inv buttons from the shopping cart check status only and the user should be able to do confirmation from Confirm goods/services.
kindly suggest how can we acheive this?
Thanks & Regards,
James

Hi
you can try ith BADI
BBP_SCREENVARIANT ( BUS2121) .
You can replace screen variant bbp_search_sc with your user defined screen variant YBBP_SEARCH_SC in the method of get_screenvariant_search.
Hope that you got it.
regards
Muthu

HOWTO: Create a Boot Configuration That Has No Driver Signature Checks. Disable Driver Integrity Checks and Install a Custom Non-Signed Driver

Hello,
Recently, I had a task where I needed to install a custom non-signed driver onto my Windows 8 64-bit setup. As it is known, Windows has driver enforcement policies that, as a security measure, do not allow you to install non-signed drivers.
I did not want to alter my current boot configuration so I decided to create a separate boot entry that would have driver signing policies disabled. For some reason I did not find any good source that would contain a step-by-step instruction on completing
this task, so I decided that I'd better share my experience here.
Lastly, there are multiple ways how you could turn off driver enforcement policies, but I find the way to do this via boot manager.
Here's how you can do that.
1. Press WindowsKey and type 'cmd' (without quotes) to find Command prompt, then click Command prompt icon. If you have User Account Control turned on, hold Ctrl+Shift keys pressed when clicking the icon.
This will force Windows to ask you for elevation of command prompt. Elevation is necessary for editing Boot Configuration Database (BCD), the database used by Windows boot manager to store boot settings.
2. In the User Account Control window click Yes to confirm elevation of command shell.
3. At the command prompt type
bcdedit
to list your BCD entries.
This will give you an output like:
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
The section that starts with Windows Boot Manager lists current settings for the boot menu. Here you find what boot entry is chosen by default, this is the one what you will boot into if you do not select any boot entry in the
boot menu.
The following record
default {current}
indicates that by default my Windows boots into configuration which I use at the moment (currently booted Windows configuration).
To find out what exactly is current configuration, look into the list of boot entries, records that contain boot loader configuration and are titled as Windows Boot Loader in the bcdedit output.
For example, the entry shown above is one of my boot configurations. This is one of the boot entries listed on the boot manager screen when I start my PC and it looks like:
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
This record has a unique GUID identifier that can be used to reference this boot entry, which is:
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
If we look at the Windows Boot Manager settings, we'll see this entry is the first in order to be displayed in the boot menu on OS start (I marked the unique bits):
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
It references my VHD drive, a virtual hard drive where my Windwos 8 setup is residing:
device vhd=[D:]\win8prowmc01.vhdx
And it also specifies that the boot manager must use UEFI BIOS extension code to access my Windows boot partition:
path \EFI\Microsoft\Boot\bootmgfw.efi
3. Now locate the current boot entry.
Current boot entry contains boot settings used to boot into Windows configuration to which you are currently booted. It is referenced in the list of boot entries as a Windows Boot Loader record that has the {current} keyword inside and may
look like:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Because we are more than happy with current configuration and want to base our new boot configuration on these settings, we need to copy this boot entry ({current}) to a new boot entry.
This is done by running the following command:
C:\Windows\system32>bcdedit /copy {current} /d "No Driver Signature Check"
Parameter /d here indicates that the following sequence of characters specifies the display name for the new boot entry that we are creating. The name inside the double quotes will be displayed in the boot menu when you boot your Windows.
In other words, if you know restart your system, you'll see the new No Driver Signature Check in the boot menu.
When copied, the entry is automatically given a new GUID identifier, so upon running the command above, you'll see the following line returned (you'll have an other GUID since these are unique identifiers):
The entry was successfully copied to {a329b5d8-fb29-11e1-a74d-f2c962d62240}.
4. Make sure the entry has been successfully created.
Run the same bcdedit. (You may specify /enum or /v, or both /enum /v parameters at the prompt to get more detail about boot entries, but simple bcdedit is just enough to see the new entry):
C:\Windows\system32>bcdedit
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
The entry has been created and given a unique a329b5d8-fb29-11e1-a74d-f2c962d62240 ID. It now has exactly same boot settings as the boot entry we used to boot into current configuration of Windows.
5. Modify created No Driver Signature Check entry and specify that Windows must have driver integrity checks disabled when booted using this boot entry.
Any modifications to boot entries are made using /set parameter. To indicate that we modify a specific boot entry, we must specify the GUID for the No Driver Signature Check record, which is:
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
In other words, to edit (add or change) an option for the boot entry, we need to use the following command syntax:
C:\Windows\system32>bcdedit /set GUID <boot_option> [<option_value>]
First, we must specify that we don't want integrity checks be made. This is done by adding the loadoptions option and setting it to DISABLE_INTEGRITY_CHECKS value:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} loadopti
ons DISABLE_INTEGRITY_CHECKS
The operation completed successfully.
6. Verify that load option has been added.
Run the bcdedit command:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
7. Add the option that turns on test signing mode and disables checks of driver signature.
Adding the testsigning option and setting it to ON does the trick for us:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} TESTSIGNING ON
8. Now we have a boot entry that enables Windows not to do integrity checks and digital signature validation.
We check it by running bcdedit:
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
testsigning Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
9. Type 'exit' without quotes to exit from command prompt, and restart Windows.
Upon booting you will be present with a new boot option to start Windows in configuration that allows you to install custom non-signed drivers.
Hope this will help anybody to create their own custom boot configurations.
Well this is the world we live in And these are the hands we're given...

Hi,
Thank you for sharing the solutions & experience here. It will be very beneficial for other community members who have similar questions.
Regards,
Kelvin hsu
TechNet Community Support

It will not allow me to download itunes it will run it then do securtiy check and then say program can not be downloaded, it will not allow me to download itunes it will run it then do securtiy check and then say program can not be downloaded

im trying to downlaod itunes to my computer i have windows 7 home preimum 32bit so i meet what u need to downlaod it but i will hit run or save either or it will start downloading then it will run the security check and then say that the program can not be downloaded i have norton virus as my protection on my computer i turned it off and trieed again and it still is doing the same thing it will not allow me to download itunes

Try disable all restrictions
Settings>General>Restrictions

Automatic Downloads and Strange Error Message: "You can auto-download purchases on this computer with just one Apple ID every 90 days"

Hi gang-
Yesterday I noticed that iTunes on my iMac had not auto-downloaded several new songs that I had recently purchased on my iPhone.    In iTunes Preferences, under Store -> Automatic Downloads, I always have Music selected so all songs purchased from any device using my Apple ID normally download automatically.
To troubleshoot this, I double-checked my Preferences and sure enough, Music was de-selected under Automatic Downloads.   I then Selected it and clicked OK.   Here's where it gets weird and I get this error message:
This computer is already associated with an Apple ID. You can auto-download purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 84 days.
I read and re-read this message and none of it seems to apply to me.   I have only one Apple ID.   I am currently logged in with iTunes to that one Apple ID.   All my iTunes Music ever has been purchased with that one Apple ID.   I am not trying to associate this computer or any other with a different Apple ID.
I logged iTunes out and then back in again and tried all the above- but same error message.
So, as it is now, I am unable to turn on Automatic Downloads in iTunes.
Anyone know what the heck is going on?
Thanks!
Dave

Hey gang-
Okay, this gets more and more bizarre.   I sent a support email to Apple and basically they said "...it seems that someone else associated your Mac with their Apple ID. That's the reason your purchases won't download."
Yikes!   My wife and I live alone- and we have exactly one and only one Apple ID.    Would somebody have needed physical access to my iMac to do that?
Support then said "You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer."
Okay- so I logged into My Account in iTunes.   On the list of associated devices, my own iMac is NOT on that list.   But I am logged in under the same Apple ID I've had for years on that iMac.
So my big question right now is...if my iMac (that I've owned for 5 years) has somehow been dis-associated from my Apple ID, how do I find out what Apple ID it is associated with?
Thanks gang for trying to help me unravel a mystery.
Dave
PS- Here's an Apple Tech article on iTunes associations, but it doesn't really go beyond what we've discussed above:
http://support.apple.com/kb/HT4627

WSUS - Auto Download and Schedule Install

Hey, so I have a couple questions regarding WSUS:
1. Can computers be set to daily check for updates from an internal WSUS server and download them without installing, and then automatically install those
updates at a different, scheduled time, whether they are connected or not? (I see the GPO called "Automatic Updates detection frequency"
that I can configured, but it doesn't say whether updates are downloaded during this operation or not)
2. Can computers be configured so that
they will download updates from an internal WSUS server first and if it's not available, then reach out to Microsoft?

So that would mean the answer to my initial question is No. I want an option called "Auto download and install at scheduled time".
Let me clarify how this all works.
The Windows Update Agent periodically checks the WSUS server for updates. Updates it finds, it reports state for: Installed, Not Installed, Not Applicable. If a "Not Installed" update is approved and available, the WUA queues the installation files
for download if the Configure Automatic Updates policy is set to AUOption '3' or '4'.
The download occurs via Background Intelligent Transfer Service (BITS) subsequent to the WUA finding the update as available for download.
When the download of the update is completed, the WUA does one of two things:
If the Configure Automatic Updates policy is set to AUOption '4', then the WUA will schedule the update for installation at the scheduled time. This scheduled installation does NOT require access to the WSUS server to be conducted.
If the Configure Automatic Updates policy is not set to AUOption '4', then the update will be retained on the client computer until a user launches the Windows Update applet from Control Panel and initiates the installation.
If the Configure Automatic Updates policy is set to AUOption '2', then the files will not be downloaded, and a logged on user must initiate the download using the Windows Update applet in Control Panel. This setting is typically used for highly mobile
computers that have only sporadic connections to the network servicing the WSUS server.
The downloading of files using BITS can be controlled using the BITS download policies in Group Policy. You can restrict the bandwidth used for downloads (per client) and/or restrict when those downloads are performed. Ergo, if you want downloads to
occur at 8pm each night, simply block the ability to download files prior to 8pm.
Please note, however, that the files MUST be completely downloaded BEFORE a scheduled installation event for the updates to be installed at that event, and the amount of time required to complete those downloads is highly unpredictable and will change from
month to month and client to client.
Finally, there is one last possible methodology, but this one is fraught with much risk. You can configure clients with AUOption '2', so they do not automatically download update files upon discovery. Then configure an Approval Deadline at the time you want
those updates to be installed. In this scenario, and ONLY this scenario, when the client reaches the Approval Deadline, it will automatically download -and- install the updates that have deadlines configured. In addition, this methodology also gives you some
capability to configure the *DAY* that updates are installed, not just the time. However, as several threads in this forum will attest, there are MANY opportunities using deadlines for things to go sideways. Be sure to anticipate ALL POSSIBLE scenarios before
initiating the use of Approval Deadlines, and more importantly! TEST! TEST! TEST! prior to implementing this methodology throughout the entire organization.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

How to disable auto-download on whatsapp

Hello everyone,
I just bought my new Q10 recently, im trying to disable the auto-download functions for photos and video from the whatsapp but cannot find any setting that giving me chances to do that. Can anyone help me to solve this problem.
Cheers.

Perhaps someone who knows WhatsApp better may respond here, but have you asked the developer of WhatsApp that question?
WhatsApp is not a BlackBerry developed app, but a private developer not associated with this forum.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can someone please assist me. I was given an iPod 3G as a gift and I tried to download various apps and it told me that my iPod needs to be iOS 7 or more but I checked and my iPod is at its latest upgrade which is 6.1.6, how can I get those app?

Can someone please assist me. I was given an iPod 3G as a gift and I tried to download various apps and it told me that my iPod needs to be iOS 7 or more but I checked and my iPod is at its latest upgrade which is 6.1.6, how can I get those app?

See a a version compable with your iPod is available:
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.
Also, if you have iOS 6.1.6 yo have a 4G (has cameras). A 3G does not have cameras and can only go to 5.1.1

Disable check and auto-download

Similar Messages

Maybe you are looking for