Syntax check and auto-format disagree

Flash 8 Pro: Well, I'm coding along quite nicely and decide
to auto-format. Auto-format says the code has errors, the syntax
check says there are none. I can run my code (though it's not doing
what I want) without getting an error.
Are there specific scenarios that cause the syntax check and
auto-format to disagree?
In just about every other development tool I've used, it will
auto format regardless of errors, even if the formatting is messed
up. it's a good aid to highlighting syntax errors! Why can't flash
do the same?
Thanks,
Paul

Well, after commenting out lots of code until the error went
away and then removing the comments and making some tweaks, the
problem has gone away..

Similar Messages

Error Message code 1900 in syntax check and code LV_ERR in user interface

In my webdynpro component when i did the code inspector check i have an error message in syntax check
which says "Message code 1900: ObjectType WDYN Object name ZXXXX Row 1 Column 0 the size of the PXA buffer reached a critical value at 158 percent. The maximum size is currently 4,194,304 bytes ==> The size of the PXA buffer reached a critical value at 158 percent. The maximum size is currently 4,194,304 bytes.
Another Error message in user interface
which says: "Message Code LV_ERR:ObjectType WDYN Object name ZXXXX Sub-Object Type Sub-Object Name Error Load unit of component is very large (generation limit).==> Error Load unit of component is very large (generation limit) .
Please help in resolving these issues.
Thanks in advance.

Hi,
you need to discuss with the basis team to increase the abap buffersize.
there is a parameter in the transaction rz11.
go to RZ11 and then wirte parameter as abap/buffersize
check its value.
if you increase it, problem will be solved i guess.
thanks
sarbjeet

Greek Spell Check and Auto-Correction

Hi, I want to know if I can add a Greek dictionary that will have the same features as the English Language has on Lion.
Why Apple didn't integrate such a simple thing. To make every user from different places in the world to have the convenience of Auto-Correction they have on iOS on OS X too. Greek Auto-Correction exist on iOS why not on Lion?

rioshorty wrote:
Hi, I want to know if I can add a Greek dictionary
Yes, see
http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html
Nobody can tell you why Apple hasn't included some feature that you want, but you can ask them for it here:
http://www.apple.com/feedback/macosx.html

Disable check and auto-download

I work in a locked down environment. Which is to say that the
end users do not have admin rights to any location on their
machines. I was given some legacy code that contains shockwave
(dcr) files and the associated files. I am attempting to run these
via a webserver. However, when the main HTML file launches to run
the content, it attempts to download and install the newest version
of the shockwave player. How do I disable this feature so it will
run with the company approved version?
Thanks,
Dwayne

If you need to disable the version check server side in the
HTML container and if you have some background in HTML here’s
a quick hack that might work although I haven’t personally
tried it myself:
1. In a scratch folder create a blank Director file with the
same stage size as the legacy dcr. If you’re not sure about
the stage size get the info from the <object> and/or
<embed> tags in the original HTML container.
2. Under the publish settings check HTML, click the shockwave
tab and lower the requirement to the approved version, then click
the HTML tab and select a template that does not perform a version
check … I think the default shockwave template will work.
Then click publish.
3. Copy the HTML container from step 2 into the same folder
as the live DCR and check to see if updates are still requested.
You might have to tweak some of the paths in the HTML to make sure
everything points where it should.
If step 3 works you have two choices, copy the non-shockwave
HTML content from the original to the new container, or copy the
<object><embed> block from the new container and paste
it into the original HTML. If you take the second option make sure
there are no VBscripts that might also force a plug-in update.
- Bob

CS5 will not compile AS3; no AS3 Syntax Check; no AS3 Auto Format

I had the trial version of CS5, but it expired. I bought the upgrade and tried to modify a previous Document Class from CS3 in AS3, but the Syntax Check just gives me the error beep, not the happy "ding" with the no errors popup. I try to click the Auto Format and the IDE pops up an error window: "This script contains syntax errors, so it cannot be Auto Formatted. Fix the errors and try again." No errors are in the ouput window (even with either Filter level). Document Classes do nothing even though the compilation runs without any problems; no errors, but no code execution (not even a trace("x");).
This seems related to the "no code hinting" posts, but I've tried their workarounds, but nothing seems to get my AS3 engine working properly.
I have removed, reinstalled & rebooted 3 times, the demo version and LWS version (which have different sized install Setup.exe ?!?!), and tried the Adobe update. I also tried using the 4.1.0 flex_sdk, but I've found no solution.
All the code I am trying in CS5 comes from CS3 and Sytnax Check fine and Auto Formats correctly. AS2 in CS5 functions as expected with Syntax Check and Auto Format working just fine.
My repeated Web cases through the Support Portal have been denied and they tell me to post it here. I posted to the Flash General forum, but no one had anything to say.
I'm on Win XP Pro SP3.
Thanks,
Dave

Dave,
It sounds to me like you may need to find a clean up script after the app is uninstalled. Or you can try just a few bits and pieces or you code to start with in a new file. That's the only thing I can think of besides reformatting to clear your entire registry of Adobe Flash items. I always do a reformat of my entire computer everytime a new version of the Adobe products comes out, saves a bit of headache.
C

AS3 Auto Format not recognizing comments

Something is corrupt with my Flash Professional CS5 Actionscript Auto format:
Comments within a block, such as ' // ' or block comments ' /* ... */ ' are tripping up the Auto Formattor, which returns this error: ' Error with autoformat near line: } '.
Comments before package block don't cause an error.
When I remove comments within package block, Auto format works correctly.
How can I fix my Flash CS3 ActionScript editor Auto format?

the problem you're seeing is the least of the known problems with auto-formatter. the worst is the auto-formatter change change well-written code to be mal-formed code.
so, while i don't think you can fix your auto formatter, what you can do is copy chunks of code to a new fla or as file and auto-format that chunk.
then check that it's been formatted correctly and nothing essential has been changed. (ie, at least, check for errors.) if everything looks ok, replace the unformatted chunk in your original file with the formatted chunk.
that's the wisest way to use auto-formatter. it's also good to know and use the undo so you can always undo an auto-format botch.

ER: HTML Applet tag syntax warning - or HTML syntax checker for JDEV.

Hi,
I just spent ages (an hour or two) debugging an applet and it turned out that I had left a comma "," out of my 'archive=..' parameter of the 'applet' tag in the HTML :-(.
E.g. I had <applet code="x" archive="a.jar b.jar, c.jar, d.jar"> and IE simply didn't load 'b.jar' so I got the usual 'class not found' exception. After signing every jar and putting every jar in every directory I finally noticed the commas between some of the jars.
I can understand IE not helping me load an Applet since, from MS's point of view, that is evil Java code, but JDev must know the syntax of a HTML applet tag too so it could highlight the error for me.
Alternatively does anyone know of a HTML checker plugin for JDEV?
Regards,
Simon.

No comments?
I've been looking around for a HTML syntax checker and there are plenty around - just google "html validation". None so far have picked up the missing comma in my busted applet tag. I guess with a missing comma it just looks like a file name with a space in it anyway.
I still think JDeveloper could flag semantic errors like this at development time.
Cheers,
Simon.

Get ALWAYS result of syntax check of sqlplus possible ?

When I pass an sql script to sqlplus as parameter then syntax errors may occur.
It could happen that I type e.g.
SELECT * from mytable
without trailing semicolon.
In this case sqlplus stops processing and waits forever without informing the
user about the problems.
Can I force sqlplus to send syntax check and error results in every case back to the user ?

Until you tell SQL*Plus that you've completed the statement by adding the semicolon, though, it has no idea when to do the syntax check. It has no idea whether you're in the middle of typing in a query that is going to span multiple lines, whether you've stopped typing to talk to someone in the hall, or whether you intended to submit a query but forgot the semicolon.
Realistically, this is just part of debugging a script.
Justin

SQL Developer 1.1.0.21: Issues with Data Grid and SQL syntax checking

In this new release of SQL Dev, when I execute a SQL in the SQL Worksheet and click in the Data Grid in the Results tab and try to navigate within a record using arrow keys, the grid cell enters into edit mode by default and so I cannot use the Left or Right arrow keys to navigate the grid. I am forced to use tab key to navigate. This is counter intuitive in my opinion.
Is there any option to change this behavior?
Another issue that I have come across is with SQL syntax checking. In some cases, when I press F9 to execute a SQL, it shows the SQL as executed i.e. shows something like 0.0134 seconds in the toolbar and no results displayed. In reality, the SQL had some syntax error which were NOT reported. This can be frustrating since now I have to fall back to SQL*Plus or TOAD just for syntax check.
I like the fact that SQLDev highlights the current SQL but it would be more useful if it just indicated the first line of the current sql instead of highlighting the whole sql.
Manish

"In this new release of SQL Dev, when I execute a SQL in the SQL Worksheet and click in the Data Grid in the Results tab and try to navigate within a record using arrow keys, the grid cell enters into edit mode by default and so I cannot use the Left or Right arrow keys to navigate the grid. I am forced to use tab key to navigate. This is counter intuitive in my opinion."
In the "Results" tab, Click Ctrl & Tab keys (at the same time) or with mouse click on any cell other than the first column (a sequence or rownum), you will be able to navigate using the arrow keys.
"Another issue that I have come across is with SQL syntax checking. In some cases, when I press F9 to execute a SQL, it shows the SQL as executed i.e. shows something like 0.0134 seconds in the toolbar and no results displayed. In reality, the SQL had some syntax error which were NOT reported. This can be frustrating since now I have to fall back to SQL*Plus or TOAD just for syntax check."
The 0.0134 seconds could be the result of the most recently executed successful statement. Check the Script Output tab for errors. Use F5 (Run Script option) instead of F9.
"I like the fact that SQLDev highlights the current SQL but it would be more useful if it just indicated the first line of the current sql instead of highlighting the whole sql."
On the SQL statement (or code), Right Click -> Format SQL (or press Ctrl & B), proper formatting would help.
I use version 1.0.0.15.57 and seems to be working allright.
- Babu Rangasamy

Is there any way to turn off the auto formatting in Pages? I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way". I HATE this!

Is there any way to turn off the auto formatting in Pages? I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to. But NO! Pages keeps changing the font size! I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size! I am getting SO FRUSTRATED! I've spent over an hour trying to get the stupid program to let me just type my letter! Can anyone help?

The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
You're welcome Rich. Glad to help.
Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
Mahalo for the and Aloha from Big Island.

Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

Inspector > Text > More > Language
Only applies to selected text, like making it a particular font.
It is not a setting that sticks. If you continue to paste in text from elsewhere particularly the Internet it will have a different or None language set to it. You need to select it and make it B.E.
Peter

Syntax check for tables and function modules

Hi,
I am writing a program that perform syntax check on object such as executable programs , function modules and tables.
Syntax check works fine for programs, but not for tables.
How can I perform syntax check on my tables or structures?
I get my data from the table TADIR. But I don't get my function modules from there. What is the table for this.
Thanks 4 ur replies.
Parvez

hi
good
generally in sap while creating a table or structure we get the error and we solved them,but like reports during runtime it is not possible to check the syntax of a table or structure.
thanks
mrutyun^

Cannot get new messages to download automatically and auto reply with out of office message have to manually check for new messages to get it to do this

I am using Mozilla Thunderbird 31.3.0. I know how to create a message filter to set up an auto reply message, but cannot get Mozilla to automatically download new message and auto reply with the message in the filter unless I manually check for new messages, that is the only way to make it work. I have looked online and can't seem to find an answer to this particular issue. According to anything that I have found, I have the correct boxes checked in server settings: check for new messages at startup, automatically check for new messages, check for new messages every x amount of minutes. It's one thing to have to leave my computer on and Thunderbird open to make this work, but to have to manually check for new messages to get the auto response to work defeats the whole purpose of having an auto reply, as I use them for vacations, holidays, etc. I have wondered if there are any security settings that are causing this issue, but if so, I don't know what changes to make to them. Thanks in advance for any help. This is driving me crazy.

I do find it a bit odd that Thunderbird is not getting mail on schedule, perhaps you have an add-on or anti virus program that prevents that.
Holding shift while you start Thunderbird will start with add-ons disabled to check if mail come automatically.
Airmail is right though, use Verizons auto responder. This link might help with that http://www.verizon.com/support/residential/internet/highspeed/account+tools/email+tools/questionsone/85621.htm#
You say that not having such a setting in Thunderbird is something that needs fixing. This idea comes on the whole because Outlook has such an option. what most people are not aware of it only works with Exchange server. There is no "vacation response" in server mail specifications so every server implements it differently.
Just as all cars have a radiator, you can not take any radiator and just put it in, they are subtly different even though they perform the same purpose. Same goes for the various vacation responders, They perform the same purpose but they differ between email server software brands.
Thunderbird leaves it to the server end to expose the functionality, as they are really the only ones who understand what they did. Outlook exposes the option and mostly greys it out.

Pages: how do I turn off auto formatting and auto indenting!

I've got Pages 5.2.2 and for the life of me can't figure out how to turn off auto formatting!
When I hit return to move text to a new line, Pages automatically indents the new line, creating a new paragraph which is not what I want at all.
I'm using a blank template and have not altered the default settings at all. Any geniuses out there who can help?

If not already present, turn on your document rulers via View > Show Rulers. Does a ¯ symbol appear by itself, or is it accompanied by an inverted triangle below it? The first symbol indicates that you have a First Indent set to other than 0. The inverted triangle says that you also have the Left indent set to the First indent amount.
In Pages, if a First indent is set, any hard return will invoke a new paragraph with an auto-indent corresponding to the First Indent amount. First lines will be indented, and subsequent lines are flush left margin (unless Left indent is not 0). In word processing, we only do hard returns when we deliberately want a new paragraph. If you want to force an end of a sentence, without forming a new paragraph, with/out auto-indent effect, use either shift+enter, or control+enter.
The First, and Left indent settings in Pages v5.2.2 are here:
Toolbar > Format > Text > Layout

BBPSC04_ Disable auto conf and auto inv from SC check status

Hello,
I would like to disable the auto confirmation and auto inv buttons from the shopping cart check status only and the user should be able to do confirmation from Confirm goods/services.
kindly suggest how can we acheive this?
Thanks & Regards,
James

Hi
you can try ith BADI
BBP_SCREENVARIANT ( BUS2121) .
You can replace screen variant bbp_search_sc with your user defined screen variant YBBP_SEARCH_SC in the method of get_screenvariant_search.
Hope that you got it.
regards
Muthu

Syntax check and auto-format disagree

Similar Messages

Maybe you are looking for