Disable Items in User Interface - Custom

I have been looking through the Control Identifier/Policy ID number from the spreadsheets below.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=6627
I have been unable to find the following item in order to remove it using group policy. Can someone tell me definitively if it does not exist and if it does what is the correct ID in order to disable it through User Configuration->Administrative
Templates->Microsoft Outlook 2010->Disable Items in User Interface->Custom.
Under Tasks, New Task, Assign Task there is a check box next to "Send me a status report when this task is complete" that I want to remove.
Thanks,
-Ethan

Hi Ethan,
>>Under Tasks, New Task, Assign Task there is a check box next to "Send me a status report when this task is complete" that I want to remove.
Sorry, based on my knowledge and test, there is no corresponding policy ID to disable this checkbox.
In addition, I searched around and found that this setting should correspond to the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\options\Tasks
AddToUpdList
Regarding this point, the following article can be referred to for more information.
Task Options not in Outlook Object Model - Registry Workaround
http://www.outlookcode.com/threads.aspx?forumid=4&messageid=32320
Please Note: Since the website above is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

User Interface/custom theming, sounds, icons etc...

Ok, I have to ask... Why doesn't Apple just open up the UI so people do not need to jailbreak in order to customize their iphone?? It is baffling how such an awesome product can also seem so limited in that sense. Anyone know if Apple has ever addressed this specifically? I have always jail broken the iPhone that I've had and the speed always compromises from it. Why can't they just make it an open UI??

Actually "kiltedtim" I do own many different phones, tablets and laptops. No where in that posting did I say I was "so unhappy" w/ my iphone 5. Just because you hang out on a forum for majority of your adult life doesn't give you entitlement to be a tool to innocent questions. I dig the simplicity and vision of Apple, just to name a few attributes I admire. My question was merely a simple inquiry in to what Apple has said in the past about the UI being opened up similar to Android. I actually enjoy making fun of my brother because his phone looks similar to my sons. I'm a former marine also, bud, so, Semper Fi my brother. Thanks for the reply.

Programatically enable-disable check box"play user interface sound effects"

Hello All,
I have been Working on something where i need to disable the "play user interface sound effects" check box ( Under System preferences under sound panel ) for few seconds and then enable the same programically without any user interface appearing on the screen. I know something related using the Applescript however there is a user interface appearing there which doesn't serve the purpose please help with some solution.If you could provide the exact location of the plist file which holds this information then that could help as well.

Hi !
I too have been working with the sounds ( Which i think is relates to @mit's query ) in an application and the problem is that when ever that application moves something to trash there is a sound which comes the sound of "throwing things in the trash". This is very annoying and i want to do something so that I can suppress that sound atleast for the time this application is on. Now is there some way where I can do this Programically . It would even be fine if I could turn off the user interface sounds completely for sometime and then bring them back on.
Thanks In Advance !
Looking Forward To Some response soon !
iMAC G4 Mac OS X (10.4) Power PC 256 MB RAM

How can I display step info in User Interface with Tracing Disabled?

I'm trying to modify the CVI Operator Interface application to update the execute panel with some step information during the execution of the program. i.e. I want to display the measurement, high & low limits during the run WHEN TRACING IS DISABLED. (Doing this, when tracing is enabled is easy, all you do is access the step record that's been constructed (I can cope with that!))
I've successfully implemented a User defined execution event to signal the User Interface application when the current step is a result (using TS_UIMsg_UserMessageBase etc. I'm posting a UI Message in the Process Model under the ProcessModelPostStep so that I will only display if its a result step.) I've added a user defined
entry in the execute.c module execution event switch statement which will call a function in the exedisp.c module to update the display. However, I don't have a context to the step that I can use. (I can't use e.g. the exeRec record since this is only completed with the context if tracing is enabled.) I've got a handle to the correct panel to write the information to, but how do I get the context to the current step when tracing is disabled?
Regards,
Brian

Hi,
no problem - btw, if you wanted to acheive this in TS 1.x, you could always write to a local variable with the ActiveX reference for the step concerned, and then use the msg reference that you have in the OI within the UI Message handler, to dig through to the Execution ->Sequence File->Sequence->Locals, or Execution->Thread->SequenceContext (and you can get almost anywhere from that).
Hope that helps
S.
// it takes almost no time to rate an answer

Disabling user interface until http request is finished

We are using JDeveloper 11 TP2 and we have fallowing problem. In our jspx pages (ADF Faces) in case when user clicks command button after it has been already clicked and before that first request is finished then action listener is triggered twice. We want to prevent that multiple action listener execution. How we can do that? Is there any way to maybe disable user interface until the request is finished.
Thanks in advance

We have solved our problem. Our solution is not general but in our case is good enough.
I have done it like this:
In jspx page we put javascript method.
function setToolbarButtonDisabled(ev){
ev.getSource().setDisabled(true);
On button that should be disabled after click put Client Listener.
<af:commandToolbarButton text="#{ui_labels.newPartners}"
icon="/images/new_ena.png"
id="createPartnersBtn"
binding="#{partnersBacking.createPartnersBtn}"
actionListener="#{partnersBacking.createNewPartners}">
<af:clientListener method="setToolbarButtonDisabled"
type="click"/>
</af:commandToolbarButton>
With this after first click button is unabled .
Later when we need to enable button we do it with method
public void enableBtn(RichCommandToolbarButton btn){
btn.setDisabled(false);
AdfFacesContext.getCurrentInstance().addPartialTarget(btn);
This method is in backing been for that page and it is called in action listener for action (click on some third button ) that should enable disabled button.

Disabling Controls in the Full Featured User Interface

Hi Ppl,
I do not want few controls (variables view, stack view) to be displayed in my full featured User Interface. What is the best way to do this. Are there configuration parameters(UserInterface.xml) that could make these controls in visible. Or Should these controls be make in visible only through the Visible Property.
Thanks

Hi Dennis,
Will Deleting the controls solve the purpose ? I tried moving the controls from the visible part of the front panel. but when the code was run the controls came back to their original position. Then I discovered that the full featured user interface has some code to set the position,size etc of the controls. This part of the code also checks the number of controls present. So I was wondering if just editing the configuration alone could disable the controls.
Thanks

User interface predefined, because there is no definition in Customizing

Hi experts,
After saving the confirmation through COR6N i am getting the following message. Please update me on the same.
User interface predefined, because there is no definition in Customizing
Message no. RU603
Thanks
Nitin Kapoor

Nitin,
Please see Error long text : it is self explanatory:
NA RU603
Short Text
User interface predefined, because there is no definition in Customizing
Diagnosis
A profile for single screen entry has not been defined as a standard profile, neither has the current user been assigned a profile in the CORUPROF parameter in the user defaults.
System Response
For single screen entry, the system uses a firmly defined interface.
Procedure
If you do not want to use this firmly defined interface for entering data, you have the following options:
Define a profile for single screen entry as a standard profile.
Execute function
Assign a profile for single screen entry to the CORUPROF parameter in the user defaults for the current user.
Execute function
Regards,
Santosh Sarda

Get overall Pass/Fail from custom User Interface

Hi Guys
I’m working on a custom user interface for operators and I would like to check and display the overall Pass/Fail result of the test at certain time intervals during execution.
I added a sequence called ‘GetOverallResult’ to the ‘FrontEndCallbacks.seq’ which checks the Pass/Fail status of the sequence and I’m calling it form a SubVI within the User Interface written in LabVIEW (Check status.vi).
The problem is that I’m getting the Pass/Fail status of the CallBack sequence not the test sequence I’m running.
Could anyone please help me in this?
Attachments:
Check status.vi ‏17 KB
FrontEndCallbacks.seq ‏5 KB

Hi Attila,
Have you instead tried reading the value directly from the main sequence? Have a look at the attached VI; pass the sequence context in and the Get Property Value VI will read the sequence's state.
Is this suitable for what you had in mind?
Regards,
Tom
Applications Engineering, NI UK
Attachments:
check.vi ‏10 KB

Configuration of SAP MDG User Interface in Customer Namespace - 7.0

Hello All.
I have been constantly reading about the mentioned content,
SAP MDG user interfaces from one single place. A dedicated WebDynpro application is provided to manage all user interface configurations.
You can also copy a standard SAP user interface configuration to the customer namespace and configure it to your requirements.
Can anyone give more details about the SAP MDG User Interface or share any links which denotes the same in detail.
Any Help Appreciated !!.
Regards,
Shankar

The document mentioned in the link does not state anything related to use user interface in customer namespace as suggested by sap in Innovations page. this is more about FPM applications.
Can you please suggest how do we use MDG User Interface in the customer environment directly as suggested by SAP.
Regards,
shankar

"With Xib for user interface" option Disabled

I was able to use the "With Xib for user interface" a couple of days ago but now when I try to create new object-c file with xib interface, I cant use the checkbox. It is disabled. What may be the problem? How can I create a file with xib again?

Does the following Stack Overflow question help you?
How to create new View Controllers in XCode 4.3
If not, you're going to have provide more information for anyone to help you. What version of Xcode are you using? What type of Objective-C file are you creating? What type of project are you adding the file to?

Using SPML to create a custom end user interface?

We are trying to create a custom end user interface which uses SPML to communicate with our IDM server. The issue we have is whether there is a way to login to IDM from this end user interface as the end user, or at least run the end user functionality such as password changes and authentication question setup as the end user without giving all end users SPML capabilities. Right now we have created a special SPML user account and we have given that user broad capabilities. We are able to change passwords and set questions but the auditing just shows the SPML user as the subject for all these actions.
Thanks,

It looks like you are absolutely right.
I also cannot find that zlman option.
So it looks like you are the first that needs it.
We use zlman to create bundles and add packages when we build them in our rpm build environment, but at that time that are always new packages that need top be uploaded. So the bundle-add-package is what we use, but that doesn't help with packages in the repository.
So I would write a enhancement request for it ...
http://www.novell.com/rms
As a workaround, not a nice one of course, you can search for the package in the repository and upload it once again. It should recognize that and create just the package links to the bundle. Not nice, but it seems to be the only option for now.
Rainer

Is it possible to provide a custom user interface in Formscentral?

I am new to formscentral and am attempting to transition a city of of pen and paper and into the 21st centrury filling out vehicle accident reports in formscentral. I have gotten everything to work properly with one exception- how can a user interface be set up to show a drawing of how two or more vehicles colide within the form?
Right now they draw the collision with pen and paper. All the other data points have been successfully incoporated into the Formscentral environment, including electronic signature. I need them to be able to move a couple of cars around on the screen and show us how they collided.
Any suggestions?
Thanks!

Hi,
Thanks for asking. FormsCentral is not currently support this workflow. A suggestion here is to use the attachment field to attach the drawing to the form.
Hope this help,
Perry

General user interface items

This question was posted in response to the following article: http://help.adobe.com/en_US/aftereffects/cs/using/WSB8DDC87E-577E-4099-A5D0-B266E9543E09a. html

How do I turn of all anti-aliasing on the After Effects User Interface within Mac OSX? I've got LCD Font Smoothing turned off in the System Preferences > General, and increased the minimum size of smoothing to above 12 points, and think that the interface fonts are surely smaller than 12 points, but they're still being anti-aliased.
For me, and I might be alone in this, I really like clear, pixel edged fonts, and this is especially true on the new Retina Macbook Pro when running in native 2800x1800 mode.

Mavericks user interface hangs - any known solutions?

I have a 27" late 2012 iMac with an up-to-date copy of Mavericks (10.9.4.)
Occasionally (as in every couple of weeks) the user interface hangs completely.
The mouse cursor moves, but clicks do not have an effect, and the keyboard is ignored.
Applications continue to update the screen. Today, for example, I was running Windows RDC 8 through a VPN to a customer server. After the hang started, I could see the progress updates on an SQL server restore as it continued to run. Activity Monitor was updating in the background too.
Connecting from my (17" MacBook Pro) laptop (: I love that machine!) using Screen Sharing worked but I could not update.
I took the dog for a walk for an hour or so, and when I returned there was a login screen on the iMac. To my great delight, I typed in my password and logged back in. To my greater disappointment, the UI was still hung and my only recourse was to crash it by holding in the power button until it stopped, then reboot.
The machine has 24GB of RAM and 1.92TB of free disk space. I doubt it is running out of resources. It has no additional displays connected.
The only weirdness is Teleport - which allows me to share the iMac keyboard with the laptop. It is entirely possible Teleport is the culprit, but I am hoping it is not.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Sybase Unwired Platform - User Interface Validations

Hi,
Does the Sybase Unwired Platform have a mechanism that enables the developer to integrate User Interface Validations?
Apple provides a standard way to validate user interfact items: http://developer.apple.com/library/mac/documentation/Cocoa/Conceptual/UIValidation/UIValidation.pdf
Is there an inherent mechanism that is a part of the Sybase Unwired platform that triggers client-side validations to prevent unncessary round-trips for simple validations that can be processed by the client itself?
Regards,
Namrata

Hi,
For simple validations there is an in-built option in SUP. We can assign rule validations to edit box, this is well explained in [Sybase Infocenter|http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01284.0152/doc/html/vhu1232730866978.html]. Or else we can also do some custom coding and achieve user interface validations. This is also well explained in the [tutorial for blackerry application development using Device Application Designer|http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01210.0152/doc/html/vhu1272906484682.html].
Regards,
Rahul Muraleedharan.

Disable Items in User Interface - Custom

Similar Messages

Maybe you are looking for