Disable monitoring for "There were database redundancy check failures for database ..."

I'm trying to disable the monitor for a database in a DAG that we don't want to have copies for.
I tried the following, but a few hours later the monitoring alert appears again;
Set-MailboxDatabase –Identity "name” –AutoDagExcludeFromMonitoring $True
Add-GlobalMonitoringOverride -Identity DataProtection\EnableDatabaseMonitoringResponder -ItemType Responder -PropertyName “Enabled” -PropertyValue “0” -Duration 60.00:00:00
Does anybody know how to disable the database redundancy check for a specific database?

Hi,
According to your post, I understand that you want to disable the monitor for a specific database in a DAG.
If I misunderstand your concern, please do not hesitate to let me know.
I’m afraid we cannot disable the database redundancy check for a specific database.
However if you don’t want this copy, you can remove this corrupted copy then create a new one:
Remove-MailboxDatabaseCopy -Identity DB1\MBX1 -Confirm:$False
More details about Add a Mailbox Database Copy, for your reference:
https://technet.microsoft.com/en-us/library/dd298080(v=exchg.150).aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Similar Messages

Disable monitoring for non-system disks.

Hi all,
Our backup server dynamically mounts disks (with drive letters) when it's backing up a Virtual Machine.
These disks are giving a lot of alerts in our monitoring that we don't need, therefore we want to disable monitoring for these disks. What is the best way to disable monitoring for these non-system disks ? As I said, these disks are dynamically mounted and
unmounted ...
Any experience with this case ?
Kind Regards,
J. Monnens

This is a bit surprising, since the logical disk discovery only runs once a day, plus it's not supposed to discover network and removable drives.
That means that your disks are mounted when the discovery runs and that they appear as "real" logical disks...
Unfortunately there is no "sync time" parameter for this discovery, which would have allowed you to specify the time of the day at which the discovery runs; thus allowing you to set a time at which you know the drives are not mounted.
Is there any other parameter that could help identifying these specific disks, besides their letter, so you could add them to a dynamic group?
Otherwise, what you could maybe try is to create your own logical disk discovery based on the native one, but with specific settings that would exclude your drives and then disable the native discovery.
But this again implies that you have something that would let you identify specifically your mounted drives... Also the native discovery is a quite complex VBS, I wouldn't actually recommend disabling/modifiying it.
Maybe I could have another idea with more details about your environment...

Disable monitoring for the Interface

Hello,
In the Cisco Prime 2.1 I want to disable monitoring for the active interface in the device (router, switch, Nexus device), but the interface must stay in active state. How to do this? Thank you and best regards, Darko

This is a bit surprising, since the logical disk discovery only runs once a day, plus it's not supposed to discover network and removable drives.
That means that your disks are mounted when the discovery runs and that they appear as "real" logical disks...
Unfortunately there is no "sync time" parameter for this discovery, which would have allowed you to specify the time of the day at which the discovery runs; thus allowing you to set a time at which you know the drives are not mounted.
Is there any other parameter that could help identifying these specific disks, besides their letter, so you could add them to a dynamic group?
Otherwise, what you could maybe try is to create your own logical disk discovery based on the native one, but with specific settings that would exclude your drives and then disable the native discovery.
But this again implies that you have something that would let you identify specifically your mounted drives... Also the native discovery is a quite complex VBS, I wouldn't actually recommend disabling/modifiying it.
Maybe I could have another idea with more details about your environment...

Disabling time-only monitoring for a method

Hello,
I have a namespace "MyCompany" with a class "MyClass". MyClass has a method that is very CPU intensive (think loads of fast enumerations). I want to exclude this method from all monitoring including time monitoring.
Can I do this by disabling monitoring for that method in the methods dialog box (resource methods) or do I need to disable monitoring for the entire class under namespaces?
Thanks,
Peter

Hi Peter,
Both variants will work.
But if you choose the second variant (disabling the entire class within namespaces configuration), you won't see all the calls of that class in stack unless you add some calls explicitly within methods.
Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/)

Disable SQL Monitoring for few servers

Hi Team,
I need to disable complete SQL Monitoring from all SQL servers except for a couple of servers.
For this I disabled the discovery "SQL Server Installation Seed" that is targeted on "Windows Server" class. Even after applying this override, I see that my objects are discovered in SQL server classes and I still get SQL server alerts
for all the SQL servers.
I am running SCOM 2012 SP1, so do I need to run "Remove-SCOMDisabledClassInstance"?
Also am I disabling the discovery for the correct class "Installation Seed"?
Thanks,
S K Agrawal

Hi Faizan,
Suppose you want to disable monitoring for a particular set of SQL servers. Here are the steps to be followed -
1) Create a group of these SQL servers.
2) Considering these are SQL server 2008, go to Authoring--> Object Discoveries.
3) Then disable the discovery for "Installation seed" class because that is targeted on "windows Server" class and is the base class for all other SQL Classes. You can do this by creating an override and disabling the discovery for the group created in Step
1.
4) Open a Operations Manager PowerShell window and run "Remove-SCOMDisabledClassInstance". You might get some error about RuleID and ObjectID. Don't worry about that and keep running "Remove-SCOMDisabledClassInstance" a few more times, finally you will get
a message of command completed successfully.
5) Then to confirm that discovery has been disabled, wait for few minutes and then go to Monitoring--> Discovered Inventory and change the target type to any of the SQL server 2008 class. You will not find the SQL servers from the group in the discovered
inventory.
To Re-enable the SQL monitoring, just remove the override MP or go to "installation seed" class for SQL server 2008. Open Override Summary, Click on Edit, and Remove the override where you have disabled the discovery.
I hope this helps.
Please mark this as Answer if this helped you.

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

I cannot shu down my iMac (for days) as I get the following message:Photos are being imported to the photo library. Now as far as I know there are no photos being imported and even if there were 5 days is crazy. How can I resolve this please?

I cannot shut down my iMac (for days now) as I get the following message: "Photos are being imported to the photo library."
Now as far as I know there are no photos being imported and even if there were 5 days is crazy. How can I resolve this please?
JLB284

Open Activity monitor in Utilities, go to the CPU tab>All Processes, and note any process that would appear to be related to importing photos, such as iPhoto, and use Force Quit. This may only be a temporary fix, as it may start all over again when you reboot. If that happens, we need to do some more investigating.
Also, close all open Applications, then open Terminal in Utilities and copy/paste and hit return, then post the output of this command.
lsof -l +L -R -V | grep /

There were no results for How can I tell if an iPhone was stollen and if it is, can I still activate it

There were no results for How can I tell if an iPhone was stollen and if it is, can I still activate it

Method #1... Call 800-MY-APPLE & have them check the serial number. If a previous owner called in to find out how to use find my iphone, chances are there'll be a case made of it

Has anyone ever gotten a MacBook pro with *********** pre loaded on it? I went into itunes, and everything was empty except for movies where there were three 15 second pornographic videos.

As I stated in the title, I ordered my Macbook Pro from apple online. I have had it for 4 days now and I was looking to transfer all of my songs from my mac mini to my macbook.
I opened up itunes and all of the categories were blank except the movies, and there were 3 of the same clips there. It was a 15 second video that involved a guy, a girl and a slip-n-slide.
I have concerns as to what else is on this thing as far as viruses and other pornographic videos, even illegal material. I was also hoping my daughter can use this for school. The last thing I would want is for her to be doing something and stumble upon a file that would surely be inappropriate.
Any advice?
MM

Contact Apple. You have 14 days from date or purchase for an exchange or refund.
Check the email receipt you received from Apple for contact information.
http://store.apple.com/us/help/contact?mco=MTkyMTQ2MzI

[svn:fx-trunk] 11810: Fixing up some logic around pauseWhenHidden ( there were some bugs) and also changing some logic around enabling/ disabling.

Revision: 11810
Revision: 11810
Author:   [email protected]
Date:     2009-11-13 17:07:56 -0800 (Fri, 13 Nov 2009)
Log Message:
Fixing up some logic around pauseWhenHidden (there were some bugs) and also changing some logic around enabling/disabling. Also fixing a small documentation bug on VideoPlayer2.scaleMode.
When a video component (or one of its ancestors) becomes disabled, the video pauses. When it becomes re-enabled, we do not play the video. This behavior is baked in to VideoDisplay and does not depend on the pauseWhenHidden flag.
QE notes: -
Doc notes: -
Bugs: SDK-24182, SDK-24181, SDK-24193
Reviewer: Kevin
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24182
    http://bugs.adobe.com/jira/browse/SDK-24181
    http://bugs.adobe.com/jira/browse/SDK-24193
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoDisplay.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer2.as

Thanks Erik,
If nothing else, this huge list of updates and fixes, shows clearly that the Logic Dev team is working hard on fixing and improving LPX to a major degree.... and from the list of fixes done.. show they do read the bug reports submitted!
As an aside....
I recall how all the 'naysayers' prior to LPX (and in some cases, since...) were proclaiming how Logic was dead, the team was being disbanded, we won't see any further development, the Dev team doesn't listen or care... and so on....... I wonder where those people are now?

CCMS monitoring for DB2/400 database backup.

Hi,
sap on iseries experts,
We need a good monitoring for the alerts from DB2/400 database backup failure with CCMS for a solution manager management.
Actually I don,t see a specific node (or MTE class) inside CCMS for this alert;
But DB12 display well the daily backup status . . . . . . . .
Can anybody help me ?
Kind Regards
Fabio

Hi all,
I'm searching also for such an possibilty.
When running Oracle there is following MTE:
RZ20 -> SAP CCMS Technical Expert Monitors -> All Monitoring Contexts -> Oracle -> Backup/restore -> Backup status -> Last succ
Does anybody know a method to monitor the backup with SAP on Iseries?
Tobias

I have Mac OS X 10.6.8 (10K549) and there is free update for Maverick will I have problems since there were no free updates prior to this?

I have Mac OS X 10.6.8 (10K549) and there is free update for Maverick will I have problems since there were no free updates prior to this? I just do not want to loose any data. Thank you for your help.

you should always make a backup of data regularly, especially when upgrading to a higher version of OS X. Just because it's free has no bearing on it giving anyone any problems. The only concern you may have is not all older programs will work with 10.9 that do with 10.6. Check here to see if you have any programs that would not run in 10.9: https://tidbits.com/article/12156

Alert 'There were problems downloading some purchased items' won't clear for the same 6 songs.

Alert 'There were problems downloading some purchased items' won't clear for the same 6 songs (see screenshot). Every time I download something new this alert comes up, yet when I check for available downloads there aren't any (see second screenshot). Also the 6 songs that are being flagged as having problems are already downloaded to my library, so literally it's just the alert/ notification that seems to be stuck. I've tried signing in and out of iTunes, re-installing itunes, re-starting the computer, emptying the cache etc, and but everytime I sign back in or re-open itunes the alert comes straight back up and it's driving me insane.
Can anyone help either clear the alert or stop it so that it doesn't pop up every time I try and download something else??

P.S the error message i got during the download is (err = - 5000)
Thanks in advance

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

Hi there, i want to buy a registered version of PS CS4 (and an Upgrade to CS6)from a private Person...is there any Possibility to check if the Adobe ID,Licence,User is a real person...or a fake before buying it? Thanks for helping!

Hi,
just got an offer from a private Person, who owns a boxed Version of Photoshop CS4 (DVD) and an Upgrade from CS4 to CS6....he told me that he can transfer the current license to me... now there's one important question for me...
Is there any possibility to check his Adobe-ID (which he already told me) if it's the same adress, name,etc. as he told me...
or if there is an registered Version of PS CS4 owned by this Adobe-ID?
Just like to check if he's a real person or a fake...don't want to buy any stolen or illegal software...or beeing punked after paying the money...
Thank you very much for helping me! :-)
Chriss

Old versions of Photoshop are not marketed by Adobe. Only CS5 can be upgraded to CS6. There are many scams on the web if you find a cheap copy of Photoshop out there its most likely a scam... Be careful.....

Disable monitoring for "There were database redundancy check failures for database ..."

Similar Messages

Maybe you are looking for