Disable one radiobutton when the other radiobutton is checked

hi
i have the following selection screen
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-001 .
PARAMETERS : p_qlt TYPE c RADIOBUTTON GROUP g1 USER-COMMAND ucom DEFAULT 'X' .
PARAMETERS:
p_sysnam TYPE tmssysnam MODIF ID m1. "system
SELECTION-SCREEN SKIP 2.
PARAMETERS : p_sys TYPE c RADIOBUTTON GROUP g1 . "MODIF ID r1
SELECT-OPTIONS: s_date FOR e070-as4date MODIF ID m2. "date
SELECTION-SCREEN END OF BLOCK block2.
when p_qlt is checked, p_sys and s_date should be grayed out.
when p_sys is checked, p_qlt and p_sysnam should be greyed.
Im trying to achieve this reqiurement, the problem is that both checkboxes are being greyed out when im trying to grey out only one because they belong to the same radiogroup.
Are the requirements above possible?

Hi,
While it makes sense to grey out p_sysnam and s_date when the corresponding radio-button is chosen, I can't see why you would want tp grey-out the radio button as well.
What happens if the user chooses the wrong radio button? Or clicks one then changes their mind? How can they switch to the other radio button if it's greyed out? The only way to change their selection will be to restart the report.
Regards,
Nick

Similar Messages

Does disabling icloud on one account impact the other, if on the same computer?

I am experiencing problems in synchronizing Plaxo across two of my accounts on the same iMac. When try to disable iCoud calendar and/or contacts, I get the prompt about deleting it will delete it from the computer. I only want to delete them from one of my 2 accounts on the same Mac. Can I do that?
If so, I'll then reenable iCloud and Plaxo, which will then rebuild both my Calendar and Contacts on the 1 particular account on my Mac.

Sorry, I know nothing about Plaxo. However if you log out of iCloud on one user account the other user account will be unaffected.

When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

How do I link multiple Spry Accordions so that when one is opened the other ones close?

I have created a web site using six Spy Accordions as the menu. I know this is not what they are usually used for but the animation as they open was just right for the site. I've gotten them working just as perfectly as I could want, with one exception. Because there are six independent accordions they all open and close independently. What I want is a way to link them so that when you open up one it closes the others so only one is open at a time. I've looked and looked for anyone anywhere talking about this and I've found nothing. I'm not even sure if it's possible. I know that Spry is being fazed out and jQuary is basically replacing it. I have considered heading in that direction but I've put so much time into this and it works so perfectly except that one thing. Here's the website for referance: http://journeywilderness.com/
Please... if anyone has any ideas about how to make only one Accordion open at a time please please help me. I'm frustrated beyond words at this.
Thank you.

You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O.

HT2731 I have 2 iPhone 4's in my name. How do I stop from sharing my photos from one phone to the other. When I take a photo it shows up on my husbands phone and vise versa. We have our iCloud turned off

I have 2 iPhone 4's in my name. How do I stop from sharing my photos from one phone to the other. When I take a photo it shows up on my husbands phone and vise versa. We have our iCloud turned off in both phones.

well i think one of you should change yalls name on the iphone its may not be the icloud but the names

I am using Mail 5.3 with two separate gmail addresses. One is personal the other is business. When I send emails from the business address, any auto-replies I get COME TO THE PERSONAL INBOX. I imagine that this is a setting? Please help!

I am using Mail 5.3 with two separate gmail addresses.
One is personal the other is business.
When I send emails from the BUSINESS address, any auto-replies/out of office notices I get come to my PERSONAL INBOX.
I imagine that this is a setting? Please help!

Edit the SMTP server list. Add a new one for the business account. Put the correct password and information for it. Give it a description so you will know which server is which. Mke sure the correct server is highlighted in the account selected and check the box to use only that server for that account. Do that for the other account also.

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

Colors get desaturated when picked and transferred from one file to the other! Why?

I used the color picker tool to choose colors from one file and fill it in another file. The color shows as desaturated when the other file is active. Both files are on the exact same settings, but I don't know what is happening. I reset the tools. But nothing.

Are you sure that mode (RGB, CMYK, etc) and assigned color profiles is the same on both files?
May be you turn on Proof Privew (Ctrl-Y) on one of the files.
PS. my english is poor )

Greetings. Do you know if an unlocked Iphone 5S can switch from CDMA to GSM with a sim card, or if you have to choose one capacity or the other when you buy the phone? Many thanks.

Greetings. Do you know if an unlocked Iphone 5S can switch from CDMA to GSM with a sim card, or if you have to choose one capacity or the other when you buy the phone? Many thanks.

Is this a Verizon or Sprint iPhone 5S?

Hi, i am looking to set cells so that when one number decreases the other increases. The catch is that when the first number goes up the other stays the same. And when it starts decreasing again the other builds up. so forth

Hi, i am looking to set cells so that when one number decreases the other increases. So say cell A is at 5, and cell B is at 0. When Cell A goes to 4, Cell B goe to 1. The catch is that when Cell A gets down to 1, and i change it to 5 again, Cell B will be on 4 and start incresing from that point on when cell A decreses. This is to show an amount of sales within a company when stock is sold.
Example:
A = 3
B = 0
A = 2
B = 1
A = 1
B = 2
A = 3
B = 2
A = 2
B = 3
A = 1
B = 4
A = 3
B = 4
A = 2
B = 5
Sorry if this sounds confusing.
Many Thanks,
Oliver

Can't be done, in a single cell, for the reasons given by Jerry.
But not difficult in a column:
I've moved the columns one to the right to put them in the body cells of the default Numbers table.
Current stock is listed in column B, with results of increases and decreases entered manually. Any increase is assumed to be a restocking, and does not affect the sales to date figure in column C. Any decrease in stock is regarded as a sale and increases the current total in column C by the amount of the decrease.
Until an entry is made in B, the corresponding cell in B will show a hyphen. This can be changed by changing the text between the quotation marks in the formula.
Enter the formula into C3 and Fill it down the rest of column C.
Regards,
Barry

I'm trying to install CS5 design standard. Which disc do I install first? One says, "CONTENT" the other has no label. When I search how to install it tells me to install disc 1. I have nothing that says disc 1.

I'm trying to install CS5 design standard. Which disc do I install first? One says, "CONTENT" the other has no label. When I search how to install it tells me to install disc 1. I have nothing that says disc 1.

Hi rinimeluv,
If the disk isn't working, try the below mentioned link.
Install Adobe Creative Suite 5
If the problem still persists please try to download it from the link mentioned below and follow the above link in case you face any issues installing it.
Download CS5 products
Thanks,
Atul Saini

How do I combine all my calendars into one and delete the others?

I have a work computer, a home desktop, and Apple air laptop and an 1phone 4s.
I use Outlook calendar for all my appointments and only need one calendar.
When I get notifications of my upcoming events on the Oulook page and on my iphone, I get multiple notifications, sometimes as many as 6 times.
How can I combine all my calendars into one and delete the others?

Your old account is the one you migrated, but it has been renamed because the new account had the same name. "Fixing" this is a bit complicated. It is possible to transfer data from one account to the other. See Transferring files from one User Account to another.
A cleaner solution is to do this:
Create a temporary new admin user account with a completely different username.
Log into this new account.
Delete the new account you created before migrating.
Delete the old account you migrated that has the changed name.
Re-migrate your old account from the Mini.
Log into the newly migrated account and delete the temporary account.
And, the simplest solution is to use the migrated account as-is and delete the account you originally made on the new computer.

Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

How to pass Data from one form to the other

Hi all
Can any one suggest me how to pass data from one form to the other form, which i zoomed from the original one?
I tried to do this by passing parameter in Event Procedure but i am getting error msg when i am opening the zoomed form.
If any one of u have any idea, give me a reply
Thank you
Suhasini

If you choose the second alternative you should erase these global variables after the second form is opened
You can erase the global variable using:
erase('global_var')
Greetings,
Sim

2 Apple TV's; Mirroring to one but not the other

Help me Apple Communities you're my only hope.*
I have 2 Apple TV's on the local network, bothe with Airplay enabled. One labelled AppleTV, the other labelled TV Upstairs.While I can happily stream music and video to both devices from iOS or the MacBook Pro, Mirroring is another matter.
On my iPad 2 when I select Airplay to the Apple TV it comes up with the option for Mirroring. However selecting the TV Upstairs Apple TV does not provide this option, and only sound output only, with quite a delay. The iPad 2 is iOS5, and both Apple TV's are latest stable release. The Time Capsule is upstair with the Upstairs AppleTV.
Any ideas for this?
* guess what I was testing video streaming with.

I think you may be suffering from the same issue as many others in that case.
The situation over the current update seems a little unsure at the present time.
4.4 was released, it was then replaced by 4.4.1, which itself was removed and then made available again, it seems from the number of related post that it may have been removed again.
Some posters are still reporting success by updating via iTunes but I can't confirm that these posts weren't simply referring to other times when the updates were available.
I'd be inclined to sit tight and try again at a later time.

Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

Hello everyone,
Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
Thanks in advance,
Jean-Baptiste

jbp- wrote:
Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
You're very welcome but Peggy really gave you the answer already.
With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps. The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen). It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app. If you haven't tried it, I suggest you give it a whirl.
I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures.

Disable one radiobutton when the other radiobutton is checked

Similar Messages

Maybe you are looking for