Disable Shutdown Button while using Terminal Services

When I remote desktop into the server remotely, the shutdown button shut's down the server.  Granted I have the reason for shutdown turned on, so some less skillful admin's have to fill in the reason and click okay before they really shutdown the server... but
Is it possible to replace the shutdown button with a Log Off button for remote sessions or disable it all together?
Seems like it could be a huge problem if I (or someone logged in as Admin) shutdown the server that's 4 hours away.

Absolutely, we have had this since 2000 (though we do tend to change the name in each new policy editor) :-).
In 2008 you need to use group policy and set the user config -> admin templates -> start menu and taskbar -> remove and prevent access to the shutdown, restart, sleep and hibernate comands = enabled
You probably want to apply this to a machine OU with loopback policy so it only applies to terminal severs.
You may also want to filter it to apply only to the remote desktop users group (this way it only applies when you logged in remotely).
if you still need to shutdwon the remote machine when remotely connected then use ctrl-alt-end to bring up the remote SAS and the shutdown button is there in the bottom right hand corner.
Alex

Similar Messages

  • Unable to support application while using data services

    I have a curve9220
    all time good product
    but unable to use any application while using data services 
    but i can browes from explore. 

    Yes, if you want to use them on mobile network you must have a BB data plan.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Installing Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services

    Hi All,
    Is it possible to install Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services. We are planning to use xenapp to publish these application.
    Please let me know if this is a supported environment.
    Regards
    Radhika

    As far as I know you will NOT be able to access OpenGL functionality through Terminal Services. as the OpenGL implementation provided in that environment is software, version 1.1 - not GPU-accelerated.
    I seem to recall there was a thread about a year ago here where someone was trying to do what you are asking.  I vaguely remember they were able to make it work, but I'm not sure.  You might try doing a search of this forum.
    -Noel

  • Disable middle button paste in terminal app

    Does anyone know how to disable middle-button paste in the terminal app?   I use the middle-button scroll wheel all the time, but it often generates a middle-button click which now seems (in 10.8) to paste and run whatever's in the clipboard, and this has been causing me all kinds of havoc.   Does anyone know of a way to disable it?
    Thanks,
    John.

    Actually the middle button  on a mouse has a specific function in OS X and you have overwritten that. If you hadn't it would work as it should in Win XP for ACad. You need to remove that change of assignments and go back to Default.
    There also may be an isolation feature in Parallels where once you are in Parallels the mouse and keyboard commands are only relayed to the OS in parallels. Not sure as I use VMware Fusion.

  • Error while using external service from application service

    Hello All,
    I have exposed webservice from a CAF project that i am importing as external service in another CAF project. Now i am using application service to directly call the external service. following is the code in my application service:
    Ns6_getCountryByCode__R inp = new Ns6_getCountryByCode__R();
                   inp.setNs6_countryCode(countryCode);
                   try {
                          HRServicesWSVi__DocumentLocal bn = this.getHRServicesWSVi__Document();
                          Ns6_getCountryByCode__RResponse result = bn.getCountryByCode__R(inp);
                          retValue.setCountryCode(result.getNs6_Response().getNs3_countryCode());
                          retValue.setCountryName(result.getNs6_Response().getNs3_countryName());
                     }catch(Exception e){
                          throw new ServiceException(e);
    I am getting the following error
    ERROR. Problem in server response: [Bad Request].:
    What could be the problem ? Thanks in advance
    Regards,
    Ashutosh Rastogi

    Hello,
    It's always a good idea to check the log file. In many cases you find hints what the reason for the error could be. The log file can be found here: <root>usrsap<SID>JC30j2eeclusterserver0logdefaultTrace.<xy>.trc where <root> is probably c:, SID something like F33, F41, ... and <xy> a number 0, 1, .... -> the highest number is the last and therefore most youngest log file. Please check out this file.
    Another very common (but trivial) error is that you forgot to specify the URL and the end point location of your Web Service in CAF's config tool. This tutorial explains this beginning on page 20 <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11669cea-0c01-0010-63b2-b98c35b1b370">Using a Web Service as External Service</a>.
    Regards,
      Jan

  • Error while using Web services for working with Informatica

    [Status] : Initializing...
    [Status] : Done
    [Status] : Calling StartWorkflow...
    From : DataIntegrationServiceSoapBindingStub
    Reason getting : null
    Jun 25, 2007 6:15:06 AM org.apache.axis.encoding.ser.BeanSerializer serialize
    SEVERE: Exception:
    java.io.IOException: Non nillable element 'reason' is null.
         at org.apache.axis.encoding.ser.BeanSerializer.serialize(BeanSerializer.java:215)
         at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1426)
         at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:914)
         at org.apache.axis.message.RPCParam.serialize(RPCParam.java:200)
         at org.apache.axis.message.RPCElement.outputImpl(RPCElement.java:433)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:139)
         at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:477)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
         at org.apache.axis.SOAPPart.saveChanges(SOAPPart.java:530)
         at org.apache.axis.attachments.AttachmentsImpl.getAttachmentCount(AttachmentsImpl.java:519)
         at org.apache.axis.Message.getContentType(Message.java:475)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:343)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
         at org.apache.axis.client.Call.invoke(Call.java:2748)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:2347)
         at org.apache.axis.client.Call.invoke(Call.java:1804)
         at samples.axis.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:744)
         at samples.axis.dataintegration.Sample1.main(Sample1.java:227)
    Jun 25, 2007 6:15:06 AM org.apache.axis.attachments.AttachmentsImpl getAttachmentCount
    WARNING: Exception:
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
    faultActor:
    faultNode:
    faultDetail:
         {http://xml.apache.org/axis/}stackTrace:java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
         at org.apache.axis.encoding.ser.BeanSerializer.serialize(BeanSerializer.java:275)
         at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1426)
         at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:914)
         at org.apache.axis.message.RPCParam.serialize(RPCParam.java:200)
         at org.apache.axis.message.RPCElement.outputImpl(RPCElement.java:433)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:139)
         at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:477)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
         at org.apache.axis.SOAPPart.saveChanges(SOAPPart.java:530)
         at org.apache.axis.attachments.AttachmentsImpl.getAttachmentCount(AttachmentsImpl.java:519)
         at org.apache.axis.Message.getContentType(Message.java:475)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:343)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
         at org.apache.axis.client.Call.invoke(Call.java:2748)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:2347)
         at org.apache.axis.client.Call.invoke(Call.java:1804)
         at samples.axis.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:744)
         at samples.axis.dataintegration.Sample1.main(Sample1.java:227)
         {http://xml.apache.org/axis/}hostname:daa30144app003b
    java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
         at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:317)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
         at org.apache.axis.SOAPPart.saveChanges(SOAPPart.java:530)
         at org.apache.axis.attachments.AttachmentsImpl.getAttachmentCount(AttachmentsImpl.java:519)
         at org.apache.axis.Message.getContentType(Message.java:475)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:343)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
         at org.apache.axis.client.Call.invoke(Call.java:2748)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:2347)
         at org.apache.axis.client.Call.invoke(Call.java:1804)
         at samples.axis.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:744)
         at samples.axis.dataintegration.Sample1.main(Sample1.java:227)
    Caused by: java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
         at org.apache.axis.encoding.ser.BeanSerializer.serialize(BeanSerializer.java:275)
         at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1426)
         at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:914)
         at org.apache.axis.message.RPCParam.serialize(RPCParam.java:200)
         at org.apache.axis.message.RPCElement.outputImpl(RPCElement.java:433)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:139)
         at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:477)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
         ... 17 more
    Reason getting : null
    Jun 25, 2007 6:15:06 AM org.apache.axis.encoding.ser.BeanSerializer serialize
    SEVERE: Exception:
    java.io.IOException: Non nillable element 'reason' is null.
         at org.apache.axis.encoding.ser.BeanSerializer.serialize(BeanSerializer.java:215)
         at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1426)
         at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:914)
         at org.apache.axis.message.RPCParam.serialize(RPCParam.java:200)
         at org.apache.axis.message.RPCElement.outputImpl(RPCElement.java:433)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:139)
         at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:477)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
         at org.apache.axis.SOAPPart.saveChanges(SOAPPart.java:530)
         at org.apache.axis.SOAPPart.getContentLength(SOAPPart.java:229)
         at org.apache.axis.Message.getContentLength(Message.java:499)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:371)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
         at org.apache.axis.client.Call.invoke(Call.java:2748)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:2347)
         at org.apache.axis.client.Call.invoke(Call.java:1804)
         at samples.axis.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:744)
         at samples.axis.dataintegration.Sample1.main(Sample1.java:227)
    Exception Occurred: java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
    faultActor:
    faultNode:
    faultDetail:
         {http://xml.apache.org/axis/}stackTrace:java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
         at org.apache.axis.encoding.ser.BeanSerializer.serialize(BeanSerializer.java:275)
         at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1426)
         at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:914)
         at org.apache.axis.message.RPCParam.serialize(RPCParam.java:200)
         at org.apache.axis.message.RPCElement.outputImpl(RPCElement.java:433)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:139)
         at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:477)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
         at org.apache.axis.SOAPPart.saveChanges(SOAPPart.java:530)
         at org.apache.axis.SOAPPart.getContentLength(SOAPPart.java:229)
         at org.apache.axis.Message.getContentLength(Message.java:499)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:371)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
         at org.apache.axis.client.Call.invoke(Call.java:2748)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:2347)
         at org.apache.axis.client.Call.invoke(Call.java:1804)
         at samples.axis.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:744)
         at samples.axis.dataintegration.Sample1.main(Sample1.java:227)
         {http://xml.apache.org/axis/}hostname:daa30144app003b
    java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
         at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:317)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:269)
         at org.apache.axis.SOAPPart.saveChanges(SOAPPart.java:530)
         at org.apache.axis.SOAPPart.getContentLength(SOAPPart.java:229)
         at org.apache.axis.Message.getContentLength(Message.java:499)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:371)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
         at org.apache.axis.client.Call.invoke(Call.java:2748)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:2347)
         at org.apache.axis.client.Call.invoke(Call.java:1804)
         at samples.axis.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:744)
         at samples.axis.dataintegration.Sample1.main(Sample1.java:227)
    Caused by: java.io.IOException: java.io.IOException: Non nillable element 'reason' is null.
         at org.apache.axis.encoding.ser.BeanSerializer.serialize(BeanSerializer.java:275)
         at org.apache.axis.encoding.SerializationContext.serializeActual(SerializationContext.java:1426)
         at org.apache.axis.encoding.SerializationContext.serialize(SerializationContext.java:914)
         at org.apache.axis.message.RPCParam.serialize(RPCParam.java:200)
         at org.apache.axis.message.RPCElement.outputImpl(RPCElement.java:433)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.message.SOAPBody.outputImpl(SOAPBody.java:139)
         at org.apache.axis.message.SOAPEnvelope.outputImpl(SOAPEnvelope.java:477)
         at org.apache.axis.message.MessageElement.output(MessageElement.java:1208)
         at org.apache.axis.SOAPPart.writeTo(SOAPPart.java:315)
         ... 17 more

    Hi All,
    Now again i am getting below error when i am calling wokrflow to run using Web Services HUB.
    please can any one help out me in this.
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: java.lang.NullPointerException
    faultActor:
    faultNode:
    faultDetail:
         {http://xml.apache.org/axis/}stackTrace:java.lang.NullPointerException
         at org.apache.axis.message.SOAPEnvelope.addHeader(SOAPEnvelope.java:230)
         at org.apache.axis.client.Call.invoke(Call.java:2789)
         at org.apache.axis.client.Call.invoke(Call.java:2501)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:1835)
         at AI.Informatica.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:1101)
         at AI.Informatica.javasrc.GSS_Informatica.start_workflow(GSS_Informatica.java:745)
         at AI.Informatica.javasrc.GSS_Informatica.execute(GSS_Informatica.java:1384)
         at AI.Informatica.javasrc.GSS_Informatica.main(GSS_Informatica.java:382)
         {http://xml.apache.org/axis/}hostname:win2k3sami
    java.lang.NullPointerException
         at org.apache.axis.AxisFault.makeFault(AxisFault.java:104)
         at org.apache.axis.client.Call.invoke(Call.java:2504)
         at org.apache.axis.client.Call.invoke(Call.java:2424)
         at org.apache.axis.client.Call.invoke(Call.java:1835)
         at AI.Informatica.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:1101)
         at AI.Informatica.javasrc.GSS_Informatica.start_workflow(GSS_Informatica.java:745)
         at AI.Informatica.javasrc.GSS_Informatica.execute(GSS_Informatica.java:1384)
         at AI.Informatica.javasrc.GSS_Informatica.main(GSS_Informatica.java:382)
    Caused by: java.lang.NullPointerException
         at org.apache.axis.message.SOAPEnvelope.addHeader(SOAPEnvelope.java:230)
         at org.apache.axis.client.Call.invoke(Call.java:2789)
         at org.apache.axis.client.Call.invoke(Call.java:2501)
         ... 6 more
    Thanks in advance.
    Mahesh.

  • Re: Error while using Web services for working with Informatica workflow

    Hi All,
    I am getting below error when i am calling Informatica wokrflow using Web Services HUB.
    able to establish connection with the informatica server.
    please can any one help out me in this.
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: java.lang.NullPointerException
    faultActor:
    faultNode:
    faultDetail:
    {http://xml.apache.org/axis/}stackTrace:java.lang.NullPointerException
    at org.apache.axis.message.SOAPEnvelope.addHeader(SOAPEnvelope.java:230)
    at org.apache.axis.client.Call.invoke(Call.java:2789)
    at org.apache.axis.client.Call.invoke(Call.java:2501)
    at org.apache.axis.client.Call.invoke(Call.java:2424)
    at org.apache.axis.client.Call.invoke(Call.java:1835)
    at AI.Informatica.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:1101)
    at AI.Informatica.javasrc.GSS_Informatica.start_workflow(GSS_Informatica.java:745)
    at AI.Informatica.javasrc.GSS_Informatica.execute(GSS_Informatica.java:1384)
    at AI.Informatica.javasrc.GSS_Informatica.main(GSS_Informatica.java:382)
    {http://xml.apache.org/axis/}hostname:win2k3sami
    java.lang.NullPointerException
    at org.apache.axis.AxisFault.makeFault(AxisFault.java:104)
    at org.apache.axis.client.Call.invoke(Call.java:2504)
    at org.apache.axis.client.Call.invoke(Call.java:2424)
    at org.apache.axis.client.Call.invoke(Call.java:1835)
    at AI.Informatica.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:1101)
    at AI.Informatica.javasrc.GSS_Informatica.start_workflow(GSS_Informatica.java:745)
    at AI.Informatica.javasrc.GSS_Informatica.execute(GSS_Informatica.java:1384)
    at AI.Informatica.javasrc.GSS_Informatica.main(GSS_Informatica.java:382)
    Caused by: java.lang.NullPointerException
    at org.apache.axis.message.SOAPEnvelope.addHeader(SOAPEnvelope.java:230)
    at org.apache.axis.client.Call.invoke(Call.java:2789)
    at org.apache.axis.client.Call.invoke(Call.java:2501)
    ... 6 more
    Thanks in advance.
    Mahesh.

    Hi All,
    I am getting below error when i am calling Informatica wokrflow using Web Services HUB.
    able to establish connection with the informatica server.
    please can any one help out me in this.
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: java.lang.NullPointerException
    faultActor:
    faultNode:
    faultDetail:
    {http://xml.apache.org/axis/}stackTrace:java.lang.NullPointerException
    at org.apache.axis.message.SOAPEnvelope.addHeader(SOAPEnvelope.java:230)
    at org.apache.axis.client.Call.invoke(Call.java:2789)
    at org.apache.axis.client.Call.invoke(Call.java:2501)
    at org.apache.axis.client.Call.invoke(Call.java:2424)
    at org.apache.axis.client.Call.invoke(Call.java:1835)
    at AI.Informatica.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:1101)
    at AI.Informatica.javasrc.GSS_Informatica.start_workflow(GSS_Informatica.java:745)
    at AI.Informatica.javasrc.GSS_Informatica.execute(GSS_Informatica.java:1384)
    at AI.Informatica.javasrc.GSS_Informatica.main(GSS_Informatica.java:382)
    {http://xml.apache.org/axis/}hostname:win2k3sami
    java.lang.NullPointerException
    at org.apache.axis.AxisFault.makeFault(AxisFault.java:104)
    at org.apache.axis.client.Call.invoke(Call.java:2504)
    at org.apache.axis.client.Call.invoke(Call.java:2424)
    at org.apache.axis.client.Call.invoke(Call.java:1835)
    at AI.Informatica.proxyclasses.DataIntegrationServiceSoapBindingStub.startWorkflow(DataIntegrationServiceSoapBindingStub.java:1101)
    at AI.Informatica.javasrc.GSS_Informatica.start_workflow(GSS_Informatica.java:745)
    at AI.Informatica.javasrc.GSS_Informatica.execute(GSS_Informatica.java:1384)
    at AI.Informatica.javasrc.GSS_Informatica.main(GSS_Informatica.java:382)
    Caused by: java.lang.NullPointerException
    at org.apache.axis.message.SOAPEnvelope.addHeader(SOAPEnvelope.java:230)
    at org.apache.axis.client.Call.invoke(Call.java:2789)
    at org.apache.axis.client.Call.invoke(Call.java:2501)
    ... 6 more
    Thanks in advance.
    Mahesh.

  • FormTemplate not found Exception while using adobe Services

    Hi,
    We are trying to create a pdf file using Adobe Services from webDynpro.
    However, in doing so, we get an error saying-
    "The error is:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException:
    FormTemplate was not found"
    Followed by the message-
    java.io.FileNotFoundException: ./temp/webdynpro/public/asianpaints.com/login_form_using_adobe/webdynpro/Components/com.apl.test.login_form_using_adobe.LoginForm/PdfForm_InteractiveForm.xdp (No such file or directory
    (errno:2))
    at java.io.FileInputStream.open(Native Method)
    at java.io.FileInputStream.<init>(FileInputStream.java:106)
    at
    com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.getTemplateURL
    (AdobeFormHelper.java:659)
    However, the PdfForm_InteractiveForm.xdp (template Source) file exists
    in the specified position.We are using Adobe Reader 6.0 on NWD04
    Could you please let us know the solution to this problem at the
    earliest as we are in the midst of the development.
    Thanks in advance
    Apeksha

    Hi,
    Thanks for the reply. I worked recreated the application by simple reinserting the interactive UI element and binding its dataSource context with a node whose values i need to display in the pdf format and pdfsource bound to attibute of type binary. However, when i deploy, i get the following exception:
    Processing HTTP request to servlet [dispatcher] finished with error.
    The error is: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running:
    com.adobe.FailedCreationException
    Exception id: [001083FE64E6006900000218000010E80004194FC07D8B75]
    However, the Document Services Data Manager service is already running along with IIOP provider.Are there some other things that need to be taken care of?
    Thanks in Advance
    Apeksha

  • Disable gui buttons while excuting script

    hi,
    i have class that that calls script in one of methods
        synchronized(this){
             Process p = Runtime.getRuntime().exec("cmd /c start " + script.getCanonicalPath());
             p.waitFor();
        }I'm writting a swing gui above this class..
    This method is quite time consuming, so i use swingworker for this(code above is called from doInBackground() method)
    While i'm calling method above i would like to have buttons on my form disabled,
    so i used this code:
          okButton.setEnabled(false);
          cancelButton.setEnabled(false);
          InitSwingWorker sw = new InitSwingWorker();
          sw.execute();As swing worker finisher buttons are supposed to be enabled again, so i enable them in the done() method of swing worker
    public void done(){
                okButton.setEnabled(true);
                cancelButton.setEnabled(true);
            }And my problem is this:
    buttons disables (that's fine), but they don't stay disabled until executing of script is done. They are enabled right away, i can see that they were disabled for few milis maybe,
    but that's it.
    thanks for any help with this :)

    When you run a "start" command in the command processor it starts a background Windows process and returns immediately. It will probably work if you remove the "start".

  • Disable Media button while working

    I think this maybe a feature request more than anything, but perhaps someone has a work around!
    I have a comp with 200+ layers, around 40 or so have movs/mp4 etc and finding that everything is grinding to a halt when working. I don't need to see these vids while setting some stuff up and think a simple Disable Footage/UnPreview Media (or similar) button along the top of the timeline, next to Shy Layers for example, would be extremely useful. I wouldn't what them switched off entirely - perhaps just filled with a solid colour which could be set in Preferences.
    Turning on and off manually is prone to error, I've tried giving the media content their own label colours and selecting that way but they are already grouped. Anyone else found this an issue and a quick solution?

    WOW - look at that! Thanks Mylenium - I wish I'd asked two weeks ago (or, rather, 10 years ago)!! Adobe should buy this and build it in

  • Prevent Agents from disabling Headset Button hen using Auto Answer With Headset

    Help!!!
    When you enable "Auto Answer with Headset" an agent can still press the Headset button and break that function.  Is there a way to keep the agent from being able to disable the Headset button on the phone (Cisco IP Phone 7962g) while maintaining the ability to force Auto Answer with Headset??
    Thanks for any ideas!

    Hi,
    It sounds more like training or organizational issue. If agents do it accidentally, usually this behavior disappeas in a couple of days (if agents were using other phones). And if they do it on-purpose, then supervisors should take care for this issue.
    Technically this issue may be resolved by placing some kind of plastic cap over the headset button, but then you should have a mechanism to activate a headset button, if it was deactivated (for excample, afther the phone reboots).
    Alternatively you may use longer cord and place the phone out of reach (not exactly "far-far away", but at least out of the hand reach. Plus, depending on the CallCenter software you use, agent may never need touch a phone, in most cases all interaction happens on the PC.
    Good luck,
    Mike / CCNP, CCVP, CCSP, CCDP, MCSE, CCIE Voice (written), etc.
    Headset Adapters for Cisco IP Phones

  • IDOC to File - Clarification needed while using business service.

    Hi all,
    I have 2 scenarios to be implemented in PI..one is IDOC to File and another one File to IDOC.File systems in the above mentioned scenarios are 2 different legacy applications when business is concerned.So i am creating separate business services for the two legacy apps.I have included ECC in SLD and created proper LS name corresponding to that maintained in partner profile in ECC.File to IDOC scenario is working fine.
    In the second scenario (i.e. IDOC to File) also i need to mention adapter-specific identifiers. But since i have already used the R/3 system id and client in the File to IDOC it is throwing an error while trying to activate the buss service.The XML message is failing at Receiver identification step when i have omitted r/3 sys id and client.In the acknowledgement i am getting the message as "Unable to convert the sender service INTEGRATION_SERVER_DEVPI to an ALE logical system"
    I have checked entire SDN but didnt find any solution for the same.
    Is there any work around for this issue?
    Rgds,
    Lekshmi.

    Hi,
      Go through these blogs....
    /people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/sravya.talanki2/blog/2005/12/02/manipulating-idoc-control-records-from-payload
    Also chk these threads also.....
    Error: Unable to convert the sender service xxxxx to an ALE logical system
    Unable to convert sender service to an ALE logical system
    Might help you....
    Regds,
    Pinangshuk.

  • Clean install on Netra T1 105 using terminal service

    Im using a windows hyper terminal session onto a Netra T1 105 and am able to boot and login as normal, however my problem lies with being able to do a fresh install from this terminal, on a normal sun box I shutdown and get the ok prompt and from there type boot cdrom, from the terminal i cant do this, how do i go about booting from a cdrom from the terminal
    thanks in advance

    Found that when terminalling into a box to execute the STOP-A command you must use Ctrl-Break

  • Error while using web service pack to deploy exchange agent

    Hi all,
    I have a problem of deploying exchange agent before creating exchange source in SES.
    OS : Windows Server 2003 R2
    The exchange server was installed successfully, I follow the steps below to create the exchange agent:
    1. unzip $ORACLE_HOME/search/lib/plugin/msexchange/ExchangeWebService.zip to the exchange server(I want to deploy exchange agent and server on the same machine).The path is c:\EXWEBService
    2. Enter IIS Manager, Activate all extended services.
    3. Right click default website to create a virtual directory:
    Name : EXWEBService
    Path : c:\EXWEBService
    Access permission: Check 1,2 & 3 checkboxs.
    4. After creating the virtual directory, right click on it , select property from the popup menu.
    5. Enter Directory security Tab.Click the first 'EDIT' button.
    6. Input the domain\username & password.
    7. Click ASP.NET Tab, set ASP.NET version as 2.0.x and click “Apply”.
    8. After applying, Click “Edit Configuration”.
    9. Input the Application Setting, and click 'Apply'.
    10.Click “Application” tab, Check “Local impersonation”, and input exchange domain\administrator & password.
    11. Execute the command : "C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe /i adodb.dll"
    The last step -> Test it:
    Select the site just create and Right-click ExchangeHttpsService.asmx and choose “Browse”. An error page shows.
    Configuration Error
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
    Parser Error Message: An error occurred creating the configuration section handler for system.web/httpHandlers: The type initializer for 'System.Web.Configuration.HttpHandlerAction' threw an exception.
    Source Error:
    Line 150: </healthMonitoring>
    Line 151:
    Line 152: <httpHandlers>
    Line 153: <add path="trace.axd" verb="*" type="System.Web.Handlers.TraceHandler" validate="True" />
    Line 154: <add path="WebResource.axd" verb="GET" type="System.Web.Handlers.AssemblyResourceLoader" validate="True" />
    Source File: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Config\web.config Line: 152
    Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
    Is there someone encounter the problem?
    null
    null

    OMG, Sorry, I read a document which was out of date!

  • Problem with function keys while using Terminal to connect to UNIX host

    We are trying to use macs at my office, but we've hit a big roadblock. Our company software runs on a UNIX server, and until now everyone in the company uses either dedicated UNIX terminals, or terminal emulation software in windows. I was thrilled to learn that we could use the terminal in OSX to connect to the server, and it did not take long to get it to work.
    The problem is the function keys. Almost all of the menu options in our company software require the use of the function keys, F1-F10. I was able to access F9 and up by pressing command-F9, etc. but we're now having issues with F3 and F4.
    The computer in question is an intel macbook, and we have been using the fn key of course. The specific problem they showed me was with F3. In the software, it is supposed to lauch an extra menu, but pressing fn-F3 on the macbook results in an error ("number required", which is the message it would normally return if we tried to press return).

    Your problem is two-sided, I think. The first is that you need to set Terminal to send the right escape sequence. This is done with the Inspector (CMD-I) and selecting Keyboard. Get the correct key mapping in there. The other side is to make sure the system isn't intercepting your intended keystroke, so go into System Preferences->Keyboard & Mouse->Kwyboard shortcuts and make sure that the bindings you're using aren't enabled.

Maybe you are looking for

  • Oracle 7.3 import to Oracle 8i Enterprise Edition

    Due to data file block corruption we had to install Oracle 8i in NT. After successful installation we tried importing 7.3.4 data to 8i, after importing table data it seeems the import process got hung, the CPU usage shows 100% and the application see

  • Can you save editable pdf as read only

    I have a client who's using an editable pdf that I set up in the full version of Acrobat 8.0. They would like to edit the doc in Acrobat Reader and then do a save as and make the doc "read Only" so that their viewers can't edit the document after the

  • Parameters via POST using WebDynpro ?

    Hi all, I need to pass parameters between two web dynpro applications of length bigger than the limit that HTTP GET method allows. I'm thinking to use HTTP POST method or HTTP Session to share data. Anybody knows if web dynpro provides a way to handl

  • Problem printing Special Characters in Smartform

    Hi, I am developing a Smartform for Position Description. For that I have to display data from table HRT1002 as the data in this table is stored using Text Editor the data internally is stored in '#' when there is a enter, space or some special Chara

  • How to generate doc/lit/wrapped services from existing wsdl?

    Hello, I am using workshop 10.1 to generate webservices from existing wsdl files from workshop 8.1. The existings webservices are based on an xmlbean utility project. When I generate the webservice from the existing wsdl file it generates automatical