Disable the mouse pointer icon!

As in the title, is there a way to disable the mouse pointer
icon, ie when you rollover the button it changes to the "finger". I
dont want to see the "finger" I just want it to remain as the
"arrow"

quote:
Originally posted by:
Newsgroup User
I guess you never noticed how your OS works??? The pointer
stays a pointer
over all buttons. I find the finger pointer rather useless as
well.
Well, I must by now reply to all of you.
First, "urami" made a good point when referring to kiosk
interfaces. It makes sense to have no roll over in this case and I
fully agree with this statement.
But in the case of the interfaces we commonly create in Flash
we need the finger icon to indicate that there is a photo-button or
a drawing-button or a clickable text here and, if we want to "hide"
it or if we do not want the user click it, we can with simple
functions (related to _x and _y mouse position) disable or enable
depending the circumstances the hot spot when the pointer rolls
over it.
The quoted remark of "DMennenoh" is not relevant.
Why? Simply because in the OS all buttons are clearly
designed as... buttons! There is no need to change the pointer icon
as we perfectly know what we are going to do and where we must move
the pointer to do the action: Open, Save, etc. And it is not only
the case for buttons, it's also the case for the menu bar...
In the interfaces we design, it is not always the case.
In all my interfaces, I always have in mind these:
How shall I react if I see this interface for the first time?
What can I do and where?
I suppose you'll agree with me if I say that some interfaces
are so bad that it is very helpful to have the finger icon just to
indicate that the area under the pointer is clearly a hot spot...
I think this discussion is far from ending...

Similar Messages

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an a

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an active link by any other one icon I select.

Current Firefox versions have a feature called tear-off tabs.<br />
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.<br />
You can drag that tab back to the tab bar in the original window to undo that detaching.
bug489729 (Disable detach and tear off tab):
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

Centering the mouse pointer at the center of a icon

Hi all,
I have an Icon on a dailog box, and when i drag the icon i want to set the mouse pointer at the center of the icon. The mouse pointer get sets to Icon Frame's leftside. i want it excatly at the center. Can plz any one help to solve this problem.
Thanx in advance

There is a when-mouse-over trigger and that works fine in client-server mode for Forms 5/6/6i, but that is less indicated when deployed using Application Server.
In that trigger you may write whatever code is necessary, restricted package procedures.
Still, I think, for your case, if you do not have to deal with a multi-record block, you should use the HINT property for that item and set_item_property with the HINT argument for that item in order to set the hint to the item's value - this should set_item_property should be called on the when-new-record-instance .

Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

Cursor (Mouse pointer) icon automatically changes

I am using Windows 8.1 and Office 365.
I have downloaded a mouse pointer icon in .cur format. I applied changes to the mouse pointer and it changed successfully. For sometime it will remain the same, but later (a few days) it changes back to the default pointer icon.What is the problem here?
Thanks

Hi,
I'm agree with Milos, we are not suggest user using 3rd pointer, it maybe had compatibility problem that would caused potential problem.
Roger Lu
TechNet Community Support

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Disable the mouse temporarily

I use a laptop and I would really like to be able to disable the touchpad using a keyboard shortcut or something. I have seen ways to disable it completely, and I could just disable tapping and the scrollbar, but i would really just like to press the windows key or something to turn it off or on.
I am using Xmonad and Openbox (not at the same time ) so i can figure out the shortcut part, if someone could point me toward how someone can disable the mouse.
Thanks

mrcold wrote:
ok.. that looks like what i want, but I can't get it to work. I've looked at this page: http://linux.die.net/man/1/synclient
when i try to change one of the parameters, nothing happens. It appears to have worked, but when i list the settings (synclient -hl) nothing has changed, and the behavior of the touchpad remains the same.
what should i do?
in your ~/.xinitrc:
syndaemon -i 2 &

When a link is rolled over by the mouse pointer a very annoying pop up with the link address shows up. There seems to be no way to prevent this from happening. How can this pop up be made to go away?

no matter what website, every time I move the mouse pointer over something to click on a line of black printing in a thin white box pops up at the bottom of the screen and shows me the http address of the item I'm about to click on. I want to shut this function off or remove it if possible. I find that the previous version did not do this, it seems to be unique to 6.0. It's VERY distracting and ANNOYING. How can I make it go away????

When you hover the mouse cursor over any link, it will display the link details at the bottom left of the screen; black font on white background.
This display can be very important as it shows the full address of the hyperlink. This can be particulary useful for checking on whether the link is bona-fida. For example; if you receive an email that looks like it is from a bank , hovering over the link will indicate instantly that the link is pretending to be something it isn't.
Another example that can be useful; a website link may say 'contact me' rather than give the actual email address. However, when you hover over the link, the actual email address will be displayed at the bottom of the screen. If you click on the link then Outlook usually opens, however I do not use Outlook, so displaying the email address is useful.
This display is something that has always been present and it is also displayed if you use IE.
However, I can see that this annoys you, so you could try the following:
[[https://addons.mozilla.org/en-US/firefox/addon/link-location-bar/?src=api]]
After installing the addon, you will need to restart Firefox, then go to History and Restore previous session to get all your tabs and webpages back.
You will now find that when you hover over any link, it will now display in your address bar on the right hand side.
If this helps, please say this question has been solved.

My mac is running extremely slow. More often than not when I try to click something or type something it gives me the "thinking" pointer icon. I ran the etre check program and got this:

Problem description:
Mac is running extremely slow. Get the scrolling pointer icon every time I click something.
EtreCheck version: 2.1.8 (121)
Report generated February 5, 2015 at 7:43:19 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 442
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: one day 9:39:51
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (177.71 GB free) - 112 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [running]    com.Affinegy.InstaLANa.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    [failed]    com.facebook.videochat.[redacted].plist [Click for support] [Click for details]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    GrowlHelperApp    Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
    Belkin Router Monitor    Application (/Applications/Belkin/Belkin Router Monitor.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    Silverlight: Version: 4.0.60531.0 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Growl [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 141.13 GB
    Destinations:
        Back up [Local]
        Total size: 250.06 GB
        Total number of backups: 7
        Oldest backup: 2012-08-25 14:58:25 +0000
        Last backup: 2015-02-04 23:30:59 +0000
        Size of backup disk: Too small
            Backup size 250.06 GB < (Disk used 141.13 GB X 3)
Top Processes by CPU: ℹ️
        14%    mds
         6%    WindowServer
         0%    fontd
         0%    AppleSpell
         0%    notifyd
Top Processes by Memory: ℹ️
    391 MB    softwareupdated
    185 MB    mds_stores
    137 MB    com.apple.WebKit.WebContent
    129 MB    Finder
    99 MB    Safari
Virtual Memory Information: ℹ️
    244 MB    Free RAM
    1.88 GB    Active RAM
    974 MB    Inactive RAM
    1.08 GB    Wired RAM
    34.01 GB    Page-ins
    130 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 3, 2015, 09:59:28 PM    Self test - passed

Perform SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
The try a safe boot:
http://support.apple.com/en-us/HT201262
Any change?
Ciao.

Is there a way to keep the mouse pointer in my window

I would like to change the cursor so that it can not go outside my application window until they exit the program. Is this possible?

Just because you disagree with its usage does not make
it an invalid question. Suppose you had an
application dedicated to real-time monitoring of a
high-pressure system. In our hypothetical example,
accessing other parts of the system without first
properly "dismissing" the application could be
potentially hazardous - people could get hurt. In
this case, would it not make sense to make the
application "system-modal"? Furthermore, it would be
a convenience to the operator if the mouse pointer
were trapped in this critical application.
How would one go about trapping the mouse cursor
inside this application?Yes, it would make sense to make this application system-modal. And it would also make sense to not allow any other applications to run on the monitoring system. For such an application, then, it would occupy the entire screen and there would be no way to swap away from it to any other application. Which is what several people suggested for this rather non-critical application, I believe.
But in the ordinary case, where you are running on a system that does allow multiple applications to run, trapping the mouse cursor in a single application is bad manners and an alternate solution should be sought.

External display won't show the mouse pointer (optical)

hi all,
13" display dimming my old eyes . decided to connect to 20" sony monitor. got the adapter > connected> display shows identical to laptop BUT no mouse pointer AND when the external monitor is displaying, the menubar is not longer existent on the powerbook (the trackpad does work on the laptop screen with external connected ) so I cannot get to the display preferences to set anything up to get the mouse pointer to show on the external monitor.
HELP and thanks
sue

ok folks, fiddled since I wrote this and managed to actually get it going ! so all set.
I'm up and running with the display. and all is dandy !
Message was edited by: Sue brown1

Is there a way to obtain the text item's value when the mouse pointer at?

Hi,
Is there a way to obtain the text item's value when the mouse pointer at? Mouse pointer may be located somewhere out of current record and even out of current block.

There is a when-mouse-over trigger and that works fine in client-server mode for Forms 5/6/6i, but that is less indicated when deployed using Application Server.
In that trigger you may write whatever code is necessary, restricted package procedures.
Still, I think, for your case, if you do not have to deal with a multi-record block, you should use the HINT property for that item and set_item_property with the HINT argument for that item in order to set the hint to the item's value - this should set_item_property should be called on the when-new-record-instance .

Just got a new macbook air and every time I close the cover and then reopen it later the mouse pointer freezes. I've just updated the operating system but no help Seems like it might be a software problem with mousepad. Its only 3 weeks new !

I purchased a Macbook Air on 01st October and from day 3 every time I close the cover and reopen it later the mouse pointer is frozen
I updated the operating system today but no change.
Any one else having this annoying problem. Seems like a software glitch to me.

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.

The mouse pointer has disappeared; how do I make it reappear?

The mouse pointer doesn't show, so I have to do everything by tapping on the screen.

Note that you have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can toggle caret browsing on/off by pressing F7 (Mac: fn + F7).
*Tools > Options > Advanced > General > Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Disable the mouse pointer icon!

Similar Messages

Maybe you are looking for