Disabling a signature line in Adobe Livecycle Designer

I have a form that have a yes / no question with checkboxes. I want the digital signature line to be disabled if the "No" checkbox is selected. I would also like the space where the digital singature goes to say "N/A".
Is that possible?
Thanks,

Hi Ismael,
as far as I can see there might be a mistake in the code itself. Did you check the tablerows you compare here?
I think you might have unexpected values at here:
tblTable[i].rowItem.colProduct.rawValue eq Table4.Row1[j].Cell0.rawValue
This might cause your unexpected result. Your results are never higher than expected, am I right?
~Florian

Similar Messages

Problem with expanding textfield in Adobe LiveCycle Designer

I've got an urgent problem with Adobe LiveCycle Designer and I really could use some help. The problem is that I'm trying to get my textfield expandable, but whatever I try, it's not working. What I'm trying to get done is that you can fill in a textfield, and when there is more text than the size of the field, the textfield expands to make the text fit in the field.
I tried a whole lot of things:
placing the textfield in a subform
expand to fit (height)
allow multiple lines
allow page breaks
flowed/positioned
etc.
The strange thing is, that no matter what I try to adjust, I can't change anything in the pagination tab. Maybe that is the problem, but I don't know what to do, to change that.
In the examples of Adobe itself (Purchase Form) is an example of a textfield that sort of behaves as I want it to, BUT the problem is that that textfield in the subform has to be triggered to appear by a button (add comments) and that is what I don't want. I want the textfield to be visible from the beginning. But in that example you CAN see the pagination tab and make changes in it.
I searched a lot in the Adobe Helpfiles of Designer, and I even bought and read/studied the book 'Creating Dynamic Forms with Adobe LiveCycle Designer', but still I'm not able to get this done.
Is there anyone who can help me?
Thanks in advance,
Sterre

I am creating my first .pdf with no training. I first converted a word doc of our form into a .pdf. Modified everything and thought I was the "bomb" for figuring it out. Then I tried to use the form and where I had "allowed multiple lines" I realized that it would allow that but not display it or print it except for what was showing.
In researching for a solution, this site said to use "expand to fit". After much frustration I realized that this feature is only available if you created the form from scratch in adobe.
I have figured out, somewhat, how to create the form and get the field to move with the text but I need the entire form to adjust to the input. Can't have one specific field expand into the rest of the form.
I did some more research on this site, and it looks like the solution has something to do with 'subforms'. No idea what to do.
If anyone knows if there is a way to do this with a converted doc (since I already have that completed) I would GREATLY appreciate it. If it isn't possible, could someone walk me through how to do it or provide a reference for a "barney style" walk through?
Appreciate ANY assistance you can provide. THANKS! Guess I need to sign up for an Adobe Pro class. BTW I'm working on LiveCyle 8.0

How to avoid wordbreak of japanese characters in adobe livecycle designer?

I am using adobe livecycle designer to design the forms.while giving the japanese characters in the text field the word break occurs and goes to next line since it is multi byte character. I have to avoid it and display the whole word in the single line.This is not happening in English characters but in Japanese.How can i achieve it in live cycle designer.anyone please help me out. thanks in advance..

Could you please try with japanese language designer? May be that will resolve your issue.

Adobe LiveCycle Designer "Open Cancelled" error

Hi,
When i use xfa.event.cancelAction = true; all dropdown fields and signature fields get locked and when i try to open a dropdown list a messege "Open Cancelled" appears and i cannot modify the value and when trying to sign the pdf a messege "sign canceled" appears.
Only some of the client machines are having this problem.
All machines are having Adobe Reader X and IE 8.
I am using Adobe LiveCycle Designer 9.0 (SP2).
Thanks in advance.

Hello Chalukya,
I'm facing the similar situation. Did you figure out the solution for this?
Thanks in advance,
kc

Adobe LiveCycle Designer 7.1 - Barcoded Forms Changes

For those of you that have upgraded to Adobe LiveCycle Designer 7.1 you should notice that there are a few changes to the Paper Forms Barcode object interface.
On the Field tab you will see that the label may be generated automatically or manually which before could only be generated automatically. The most significant change may be found further down in the new Symbology pull-down menu. Not only can Barcodes be generated in the PDF417 format, but now you can take advantage of both QRCode and DataMatrix. Depending on the region as well as vertical will probably decide which format you will be using on your forms but it may be worth experimenting with different symbologies and data capacities based on the data of your forms to see if there may be a better alternative.
On the Value tab you will find a slight change to the automated scripting. Tab-delimited and XML may still be generated automatically but you now have the option to select whether or not you would like to include the field names and labels. The Include Field Names separates the field names by tabs and encodes them as the first line of the barcode contents. The values are encoded beneath them. Include Label encodes the label (shown in Field tab) as the first tab-delimited field in the barcode contents. This is a great way to include a form identifier as a standard in your data (a good best practice). Keep in mind that when using the default tab-delimited formats the Adobe LiveCycle Barcoded Forms Decoder can create XML from tab-delimited data automatically which saves some time on the back-end integration effort.
Again on the Value tab there is another new drop-down field named Collection. For those of you familiar with the Barcoded forms interface of Acrobat, you were able to select the fields that you wanted to be encoded in the barcode without having to do any custom scripting. The Collection interface basically provides you with the same functionality but under a great tree-view interface that allows you to manage the data that goes into your Barcode very easily, again, without custom Scripting.

I am receiving the following error when I deploy the xdp form onto the adobe form server 6.0.
=====error===================================
2006-03-07 16:30:17,287 WARN [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.XFA=dataPrep is not a valid attribute of barcode, Attribute not loaded. Line 27066.
2006-03-07 16:30:17,646 INFO [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.timing=!PERFORMANCE! XMLFormFactory.PAexecute() Setup + mpoFormAgentFactory->PAexecute Time: 0.74395 seconds
2006-03-07 16:30:17,646 DEBUG [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.generic=XMLFormFactory::PAexecute mpoFormAgentFactory->PAexecute returned
2006-03-07 16:30:17,646 INFO [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.timing=!PERFORMANCE! XMLFormFactory.PAexecute() Total Time: 0.74427 seconds
2006-03-07 16:30:17,646 DEBUG [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.generic=XMLFormFactory::PAexecute - returning
2006-03-07 16:30:17,662 WARN [com.adobe.formServer.RunTimeContext] class com.adobe.formServer.PA.XMLFormAgentWrapper : mid:29226 tid:2424.2688 sev:w text: dataPrep is not a valid attribute of barcode, Attribute not loaded. Line 27066..
2006-03-07 16:30:17,693 DEBUG [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.generic=XMLFormFactory::PAexecute - entered
2006-03-07 16:30:17,693 INFO [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.timing=!PERFORMANCE! XMLFormFactory.PAexecute() Data Setup Time: 0.00413 seconds
2006-03-07 16:30:17,693 DEBUG [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.generic=XMLFormFactory::PAexecute - invoking mpoFormAgentFactory->PAexecute
2006-03-07 16:30:17,974 WARN [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.XFA=dataPrep is not a valid attribute of barcode, Attribute not loaded. Line 27066.
2006-03-07 16:30:18,724 WARN [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.XFA=Argument invalid: not supplied/range/etc.
2006-03-07 16:30:18,974 DEBUG [org.jboss.jmx.adaptor.snmp.agent.SnmpAgentService] It's for me: javax.management.MBeanServerNotification: notificationType=JMX.mbean.registered source=JMImplementation:type=MBeanServerDelegate seq-no=568 time=1141729218974 message=null objectName=jboss.web:type=RequestProcessor,worker=http-0.0.0.0-7001,name=HttpRequest3 userData=null, handback:2147483647
2006-03-07 16:30:20,021 WARN [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.XFA=PaperFormsBarcode1 'access' attribute should explicitly be set to 'nonInteractive'. Field will be drawn as a boilerplate.
2006-03-07 16:30:20,037 WARN [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.XFA=XFAImageService: Image cannot be resolved for node: PaperFormsBarcode1.
2006-03-07 16:30:20,037 WARN [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.XFA=ImageStore does not contain the key [F[0].pbarcode[0].detail[0].PaperFormsBarcode1[0]]. Hint: The addImage method must be called first.
2006-03-07 16:30:20,787 INFO [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.timing=!PERFORMANCE! XMLFormFactory.PAexecute() Setup + mpoFormAgentFactory->PAexecute Time: 3.09997 seconds
2006-03-07 16:30:20,787 DEBUG [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.generic=XMLFormFactory::PAexecute mpoFormAgentFactory->PAexecute returned
2006-03-07 16:30:20,787 INFO [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.timing=!PERFORMANCE! XMLFormFactory.PAexecute() Total Time: 3.10126 seconds
2006-03-07 16:30:20,787 DEBUG [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.generic=XMLFormFactory::PAexecute - returning
2006-03-07 16:30:20,818 WARN [com.adobe.formServer.RunTimeContext] class com.adobe.formServer.PA.XMLFormAgentWrapper : mid:29226 tid:2424.2688 sev:w text: dataPrep is not a valid attribute of barcode, Attribute not loaded. Line 27066..
2006-03-07 16:30:20,818 WARN [com.adobe.formServer.RunTimeContext] class com.adobe.formServer.PA.XMLFormAgentWrapper : mid:18458 tid:2424.2688 sev:w text: Argument invalid: not supplied/range/etc..
2006-03-07 16:30:20,818 WARN [com.adobe.formServer.RunTimeContext] class com.adobe.formServer.PA.XMLFormAgentWrapper : mid:12369 tid:2424.2688 sev:w text: PaperFormsBarcode1 'access' attribute should explicitly be set to 'nonInteractive'. Field will be drawn as a boilerplate..
2006-03-07 16:30:20,818 WARN [com.adobe.formServer.RunTimeContext] class com.adobe.formServer.PA.XMLFormAgentWrapper : mid:29461 tid:2424.2688 sev:w text: XFAImageService: Image cannot be resolved for node: PaperFormsBarcode1..
2006-03-07 16:30:20,834 WARN [com.adobe.formServer.RunTimeContext] class com.adobe.formServer.PA.XMLFormAgentWrapper : mid:18177 tid:2424.2688 sev:w text: ImageStore does not contain the key [F[0].pbarcode[0].detail[0].PaperFormsBarcode1[0]]. Hint: The addImage method must be called first..
Can someone help?
Thanks
DINESH

Adobe LiveCycle Designer 8.0 exporting data from adobe data set into Excel

Hello - I am new to this, and have no IS support from my organization, so I am at your mercy.
I am trying to export the files within my adobe dataset created from Adobe LiveCycle Designer 8.0 into an Excel file. When I do this only 126 files are transferred. There doesn't seem to be any particular cut off or reason. For example last names a-p file entries #1-126, then cuts off at file entry #127 leaving the last half of the alpha q-z. I do have one friend is IS whom on his free time, looked into the program to see if there was a setting or something that only allowed a certain amount of space/files to be exported, but he couldn't find anything. His only thought was that my computer didn't have enough space, but I have 18.9GB of free space on the C:. Any sugesstions and or help is greatly appreciated! Thanks, ALR

I select all, click the Export Button, and it only gives me the option to save as a CVS Excel type file, sometimes it exports files, other times it wont, when it does, it only does 126 lines in Excel, then won't let me add any more with a second export attempt.

Expanding Textfield in Adobe LiveCycle Designer

I've got an urgent problem with Adobe LiveCycle Designer and I really could use some help. The problem is that I'm trying to get my textfield expandable, but whatever I try, it's not working. What I'm trying to get done is that you can fill in a textfield, and when there is more text than the size of the field, the textfield expands to make the text fit in the field.
I tried a whole lot of things:
placing the textfield in a subform
expand to fit (height)
allow multiple lines
allow page breaks
flowed/positioned
etc.
The strange thing is, that no matter what I try to adjust, I can't change anything in the pagination tab. Maybe that is the problem, but I don't know what to do, to change that.
In the examples of Adobe itself (Purchase Form) is an example of a textfield that sort of behaves as I want it to, BUT the problem is that that textfield in the subform has to be triggered to appear by a button (add comments) and that is what I don't want. I want the textfield to be visible from the beginning. But in that example you CAN see the pagination tab and make changes in it.
I searched a lot in the Adobe Helpfiles of Designer, and I even bought and read/studied the book 'Creating Dynamic Forms with Adobe LiveCycle Designer', but still I'm not able to get this done.
Is there anyone who can help me?
Thanks in advance,
Sterre

Excellent directions and help on this subject, Thanks Jared & Gretchen.
I must be missing something critical >>>
I have a large employee review document (34 pages) with 23 sections. Each section has a feedback area with expanding text fields, each of the sections is in it's own positioned subform. I have grouped the sections (and subforms) on each page into a flowed subform. The document itself is saved as an Acrobat 7 Dynamic form. My problem...the sections do not Flow. The expanding text boxes work just fine, but they do over-run the sections below.
I have reviewed the comments above and I can get it to work with a single page document, just not with a large - long document, everything over runs.
Any ideas? You will be held in very high regard!
~dimwit

Adobe LiveCycle Designer 8 Beginner

I am very much new to adobe form design tools. Now my company wants me to develop an eForms system using Adobe LiveCycle Designer 8.
The requirements are like this
All pdf forms will be saved in the file server.
Users can enter data directly into the fields of the form.
The form can capture data the user enters, and provide interactive feedback such as when an employee enter his roll number his department should be filled automatically in the form.ie form provide dynamic data
The form should be able to process the user data directly to a database.
Can anybody give some good reference so that I can start the project?
Thanks in advance,
dev

I have a vital form that clients fill out, which is passed to many people in the company along the workflow. The form is a Planner and we have in the following PDF, Word Doc..
Well before, the Planner.pdf was originally created in Word, since most people have access to Word.. but evolved to a PDF form created from the Word Doc via Adobe LiveCycle Designer 8.0 w/ User Rights enabled so that the form could be filled out and saved using Adobe Reader.. which was a step better than Word.. being that it is free. But this needed to be easier and more to the point b/c some clients don't particularly like installing the latest version of Reader, even if you provide them the link. Nor do they like saving the form, filling the form, and attaching the form to send back.
My goal is to have the client fill an HTML version of the form, submit and be done with it, but everyone in the workflow be able to easily receive the filled Planner as a PDF form.
So some months ago I ran into this post Chris Trip, "Populate Livecycle PDF from mySQL database using PHP" #8, 22 Sep 2007 4:37 pm
which uses the command line Win32 pdftk.exe to merge an FDF file into an existing PDF on the remote server, and serve this to whoever.
My problem was with shared hosting and having the ability to use the Win32 pdftk.exe along with PHP which is predominantly used on Linux boxes. And we used a Linux box.
so i created the following unorthodox method, which a client fills the HTML version of the Planner, all field values are INSERTED into a table in MySQL DB, I and all filled planners that have been filled by clients to date can be viewed from a repository page where an XML file is served up of the corresponding client, but someone would have to have Acrobat Professional, to import the form data from the XML file into a blank form.. altoughh this is simple for me.. I have the PHP file already created so that when a Planner is filled and client submits. >> the an email is sent to me with a table row from the repository of the client name, #, email, and a link to d-load the XML file,
But I also have the PHP files created so that the Planner can be sent to by email to various people in the workflow with certain fileds ommitted they they do not need to see, but instead of the XML file beiong served up i need the filled PDF Planner to be served.
I can do this locally with ease on a testing server, but I am currently trying to use another host that uses cross-platform compatibility so i can use PHP and the pdftk.exe to achieve this, as that is why I am having to serve up an XML file b/c we use a Linux server for our website, and cant execute the exe.
Now that I am testing the other server (cross-platform host), just to use them to do the PDF handling (and it's only $5 per month) I am having problems with getting READ, WRITE, EXECUTE permissions..
Si guess a good question to ask is can PHP do the same procedure as the pdftk.exe, and i can eleminate it.
or how in the heck can i get this data from the DB into a blank PDF form, like i have described??
here are some link to reference
Populating a LiveCycle PDF with PHP and MySQL
http://www.andrewheiss.com/Tutorials?page=LiveCycle_PDFs_and_MySQL
HTML form that passed data into a PDF
http://www.mactech.com/articles/mactech/Vol.20/20.11/FillOnlinePDFFormsUsingHTML/index.htm l
and an example
http://accesspdf.com/html_pdf_form/

Adobe Form Designer 5 upgrade to Adobe LiveCycle Designer 7

Hello,
Our team will begin the upgrade process from Adobe Form Designer/Form Server 5 to Adobe LiveCycle Designer/Forms 7 later this month. We've been told by Adobe that this is a significant upgrade.
For those of you that have already been through the process, do you have any advice, lessons-learned, etc. to offer?
Much appreciated,
MM

I'd have to agree that it is a significant upgrade. Perhaps not for features/benefits but in effort.
I can't provide any specifics because we chose not to convert but I can give you an idea on what tasks you might encounter.
I hope you don't have many forms and very little VBScript or default scripting and don't use the API for presenting forms for filling.
We have lots of forms (150 presentation screens [forms] producing 500+ printed forms via the Central Pro Output Server). All the presentation screens use VBScript and they are presented to the user with a VB program using the API. To get the capabilities we needed we used all the stuff that makes the conversion a major effort.
We would have to learn the software, redo the presentation screens, learn the new data model, learn JavaScript, rewrite, test and debug 100s of lines of scripting and learn the new API and rewrite the presentation program. And then to top it all off we would probably have to purchase the horrendously expensive Reader Extension software.
We don't have the staff, time or money for that effort. Besides, we are still in the process of converting forms from our older systems and doing a conversion in the middle of the conversion just doesn't make sense.
All the postings for help in these forums also makes me extremely leary. At least Adobe has put staff to actually helping customers that post here. To begin with that wasn't occurring.

Uninstall string/command for Adobe LiveCycle Designer 8

I would like to uninstall, via a command line/uninstall string, the Adobe LiveCycle Designer 8 package on multiple PCs. Can someone provide me with this information? I see there is a manual uninstall through the add/remove programs, but this is not an option. It came packaged with our Adobe Acrobat 8 Professional software.
Thanks.

Hi Markus,
Thank you for reply.
I dont have SAP GUI Installation DVD with me. I am a developer who is supporting SAP Web Dynpro Application installed at client side.
Is there any other way to find this installation?
And on SAP GUI DVD, can you tell me its location?
Thanks and regards,
Amey

ADOBE LIVECYCLE DESIGNER 7.1 download

Hi Everyone,
I'm trying to download ADOBE LIVECYCLE DESIGNER 7.1 from service.sap.com and I can't find a suitable installation package.
Does anyone knows how to download it?
Thank you

Hi Daniel,
Go to [https://websmp105.sap-ag.de/swdc]. On the left panel click "Search for Software Downloads". Then enter "Adobe Livecycle Designer 7.1" in the search field, click search and it will show up in the first line of results.
Best regards, Aldo.

Adobe LiveCycle Designer ES closes every time I open it :(

Hello all, I want to thank you beforehand for the help regarding this matter. I use Windows Vista and my Adobe LiveCycle Designer was working before but for the last week and a half or so I have not been able to get it to work! I have done scandisk/defrag/and have multiple software to keep my computer clean so I have taken those precautions beforehand. To the problem...:
My Adobe LiveCycle Designer opens up and it was working previously as mentioned, but when I try to open it by either opening or converting a form or creating a new form with a template, I am not able to as it gives me an error message and closes! It gives me an error message of "Adobe LiveCycle Designer ES has stopped working" and a screenshot of this is provided at the following link:
http://www.mediafire.com/imgbnc.php/bc59d422150595157c212a5b181313244g.jpg
I don't know what to do and wanted to see if I could solve this problem before I was forced to try to manually reinstall it so hopefully I don't have to go through that. I appreciate the help once again!

I am dealing with the same problem. I called Adobe technical support and spent hours to fix the problem but none worked. I tried to explain them the error might be caused by the Activation process but they just made me uninstall and install application several times.
When I start LiveCycle it gives the following error: adobe livecycle designer es has stopped working.
I start debugger to see what's going on and get the following exception: Unhandled exception at 0x773db663 in FormDesigner.exe: 0xC015000F: The activation context being deactivated is not the most recently activated one.
Does anyone know how to deactivate this product manually? Because deactivate menu is dimmed and I cannot deactivate product from the program. I believe if I can just remove activation info and activate it again this problem might disappear.
Thanks

My Adobe LiveCycle Designer ES closes when I open it....:(

Hello all, I want to thank you beforehand for the help regarding this matter. I use Windows Vista and my Adobe LiveCycle Designer was working before but for the last week and a half or so I have not been able to get it to work! I have done scandisk/defrag/and have multiple software to keep my computer clean so I have taken those precautions beforehand. To the problem...:
My Adobe LiveCycle Designer opens up and it was working previously as mentioned, but when I try to open it by either opening or converting a form or creating a new form with a template, I am not able to as it gives me an error message and closes! It gives me an error message of "Adobe LiveCycle Designer ES has stopped working" and a screenshot of this is provided at the following link:
http://www.mediafire.com/imgbnc.php/bc59d422150595157c212a5b181313244g.jpg
I don't know what to do and wanted to see if I could solve this problem before I was forced to try to manually reinstall it so hopefully I don't have to go through that. I appreciate the help once again!

Hi,
I have a few screenshots here that show Windows XP and Vista: http://forums.adobe.com/message/2226510#2226510.
C:\Users\Username\AppData\Roaming\Adobe\Designer\8.2\
In addition it is the same location for Windows 7:
Good luck,
Niall

Adobe LiveCycle Designer ES closes when I open it...

Hello all, I want to thank you beforehand for the help regarding this matter. I use Windows Vista and my Adobe LiveCycle Designer was working before but for the last week and a half or so I have not been able to get it to work! I have done scandisk/defrag/and have multiple software to keep my computer clean so I have taken those precautions beforehand. To the problem...:
My Adobe LiveCycle Designer opens up and it was working previously as mentioned, but when I try to open it by either opening or converting a form or creating a new form with a template, I am not able to as it gives me an error message and closes! It gives me an error message of "Adobe LiveCycle Designer ES has stopped working" and a screenshot of this is provided at the following link:
http://www.mediafire.com/imgbnc.php/bc59d422150595157c212a5b181313244g.jpg
I don't know what to do and wanted to see if I could solve this problem before I was forced to try to manually reinstall it so hopefully I don't have to go through that. I appreciate the help once again!

Shawn,
This may be a couple of known things; one is related to your specific installation (may have become corrupted if you did an upgrade from a previous version, especially if you upgraded from Beta?) Or, it may be related to a known SQL Server compatibility bug for which a hotfix will shortly be posted. (Problem with some Microsoft DLLs that get updated if you install SQL server).
If you have SQL Server installed, try looking on these forums for a patch that should be posted within the next 2 days. If not - please contact me directly, as I'd like to get someone on my development team to help look through your installation and see what the problem is, so we can fix this properly.
Mike

Adobe LiveCycle Designer ES and Adobe Acrobat 9 Pro

I recently purchased Adobe Acrobat 9 Pro, it came with Adobe LiveCycle Designer ES. When I create a new document with Acrobat 9, it takes me right into LiveCycle for the design, which I do not mind. However, the properties for each field are very limited in comparaison with Acrobat 9. So, the file I create with LiveCycle I want to be able to open again with Acrobat 9 and reach the field properties with Acrobat 9, but the system does not allow me to do that. What am I doing wrong?
Anne-Marie

To force uppercase, enter the following in the change event as JavaScript (make sure JavaScipt is selected in the language dropdown list at the top right):
xfa.event.change = xfa.event.change.toUpperCase();
As you can see in the picture, there are many palettes available on the right side to edit fields. Hope this helps.

Disabling a signature line in Adobe Livecycle Designer

Similar Messages

Maybe you are looking for