Disabling Alterations to Certain Areas

I managed to set up contribute to enable text and/or image
alterations quite easily.
However, I want to restrict the user, so that they can only
edit certain areas of text etc.
Can anyone point me into the right direction?
The website in question can be viewed at
http://www.warwickshire-webdesign.co.uk/croatia/

>I managed to set up contribute to enable text and/or
image alterations
>quite
> easily.
>
> However, I want to restrict the user, so that they can
only edit certain
> areas
> of text etc.
>
> Can anyone point me into the right direction?
>
> The website in question can be viewed at
>
http://www.warwickshire-webdesign.co.uk/croatia/
>
When creating the site using DW, you need to create a
"template" page which
will enable you to "lock regions".
Helen, lime, et al.

Similar Messages

  • Hide/disable certain areas from the Overview page of ESS in portal

    HI All,
    We have a requirement where we need to hide/disable certain areas from the "Overview" page of ESS in portal.
    In Overview page, we have certain links like Employee search,Life and work events,
    Purchasing and travel and expenses.
    I m not able to find these pages under overview workset also.
    We have to hide 'Purchasing' and 'life and work events' areas from the overview page as the customer dosent want to use this sap standard impl.
    Is the customiztion to be done from portal side or do we need to do it from the IMG??
    Can someone pls tell us in detail how to do it?
    Thanks,
    Abhishek

    Hi Abhishek,
    Inorder to hide/diable certain areas from the Overview page of ESS you need to do it from the IMG.
    The detail steps are as follows:
    1) After logging in to your backend, run Transaction code SPRO.
    2) Select the SAP Reference IMG button.
    3) Follow the path: Cross-Application Components >> Homepage Framework >>
    Areas/Sub Areas.
    4) In the Assign SubAreas to Areas OR Assign Areas to Area Group Pages (depending on your requirement), to hide the particular area , set the Position value to 0 for the Area / SubArea that you wish to hide.
    5) After making the changes, Refresh the Portal browser page to reflect the new changes.
    Hope this helps.
    PS : Award points if found helpful.

  • IPhone 5 incoming calls go straight to voicemail in certain areas

    I know that this issue has been reported by many users in this and other forums, but I thought I would share my story too.
    I have a iphone 5 that is exhibiting the following issues:
    - When I am downtown Boston and certain areas in MA, incoming calls go straight to voicemail.  The phone does not ring and the only way to tell if people called me is if they leave a voicemail
    - When I make calls, my phone numbers shows as blocked at the receiving end.  So if people block anonymous calls then  I won't be able to call them
    I opened a ticket with VZW and this is what has been done so far to no avail:
    - Got a replacement phone
    - Changed the SIM card
    - Verizon Re-provisionned the phone number
    - Disabled LTE
    - Reset Network Settings
    - Power cycle the phone (many many times)
    Verizon said my issue is due to network extenders in the area.  Well, if this is true then thousands of VZW customers would have this issue as network extenders are all over the place in Boston. So far VZW does not have a solution to my problem.
    My next step is to reactivate my old iPhone 4S to see if it is a iPhone5 issue or something else.  will keep you posted.

    If they say they did, ask them to re-provision the account. Sometimes errors occur and the account is not provisioned correctly, even though features are included in your plan according to the billing system.

  • Looking for an AIR Native Extension for iOS that will allow / disable access to certain apps

    I am looking to find and or create an ANE that will allow access and or disable access to certain apps such as internet, text, games, vine etc.  This url represents the closest app to what I am trying to achieve:  https://itunes.apple.com/us/app/parentkit/id600618138?ls=1&mt=8
    Is this possible with iOS7 new features / AIR / older iOS?
    As always any and all direction and help is greatly appreciated,
    Thanks!

    Is this the wrong forum, or posting area?  Is this possible?
    Access to the followinf would work:
    http://support.apple.com/kb/HT4213
    Is this open for development / access to, api?
    Message was edited by: studiobrain

  • Pixels appear incomplete in certain areas within text. The words are blurry like the pixels haven't fully opened...

    text appears blurred only in certain areas. When you mouse over the text or highlight the text then remove the highlighting the text becomes crystal clear or sharp and will stay that way.

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • Hiding certain areas from the overview page of ESS in portal

    HI All,
    We have a requirement where we need to hide/disable certain areas from the "Overview" page of ESS in portal.
    In Overview page, we have certain links like Employee search,Life and work events,
    Purchasing and travel and expenses.
    I m not able to find these pages under overview workset also.
    We have to hide 'Purchasing' and 'life and work events' areas from the overview page as the customer dosent want to use this sap standard impl.
    Is the customiztion to be done from portal side or do we need to do it from the IMG??
    Can someone pls tell us in detail how to do it?

    It sounds like first you need to understand the Overview page and how it gets built. This all comes from the Homepage Framework configuration in the BACKEND (ECC box). Look in the IMG under "Cross Application Components" (or in the ESS section as will which actually has the same section) to find the configuration area. The Homepage Framework configuration however is also tightly coupled to the portal content (ie. objects in a portal role PCD path are tied to configuration "resources" in the Homepage Framework configuration). I won't get into all that, as there is plenty of material in these forums and documentation (help.sap.com) that describes the details of how all of this works. However, to answer your immediate question....
    Ok....so the "lazy man's approach" is fairly simple....in the IMG where you assign the Areas to the Area Group, you can simply change the display order number of the ones you want hidden to 0 (zero)....this will at least keep your standard entries in place....or you can just delete them from the assignment to the Area Group in the "change" step.
    Sooooo....that gets them off the Overview (Area Group) page. However, they will still be in the standard delivered portal role (for example, the worksets will still show up in the second line of the top level navigation). So you need to remove the worksets from there.
    Now, I call the above the "lazy man's approach" because in actuality, you should build your own custom Homepage Framework to your needs. This way it is safer, customized and you are not touching the standard, delivered entries so you can use them as reference later. Also, you should be doing the same on the portal side....ie. build you own custom role based on delta-linked copies of the standard objects (worksets, pages, and iViews). This might seem like a lot of work, but it is way more flexible....for example, if you need several different ESS "versions" to accomodate different types of users.

  • How do i disable iMessage from my mac, i have looked at other comments and there is no option to disable it when messages are open

    how do i disable iMessage from my mac, i have looked at other comments and there is no option to disable it when messages are open

    Solution may be found if you search in the "More Like This" section over in the right column.

  • For disable any responsibility we are end date that from front end.

    for disable any responsibility we are end date that from front end. what nay command from backend for disable the responsibilty.?

    Refer the following thread
    delete a responsability
    Re: delete a responsability
    Regards
    -Mahesh

  • Drops connection completely in certain areas of town. Augusta, GA

    >> Duplicate post removed to comply with Verizon Wireless Terms of Service.  See Drops connection completely in certain areas of town. Augusta, GA <<
    Message was edited by: Verizon Moderator

    I have problems around The Augusta Exchange Shopping center and it doesn't pick back up until I get past washington road on I-20

  • Find certain areas of text from a text file

    Hello all java Gurus! I need your help on something I am trying to do in order to learn java. I am very newbie and please show mercy if I don't understand every answer you probably give me. Here is my problem. I have text file with certain areas I need to "isolate" (to insert the data in a jTable after I solve this first).
    Let's say we have the following data in a text file:
    FILE IS "A.txt"
    ***first***
    this is 1 line in first
    this is  2 line in first
    this is 3 line in first
    ***second***
    this is 1 line in second
    this is  2 line in second
    this is 3 line in second
    ***third***
    this is 1 line in third
    this is  2 line in third
    this is 3 line in third
    **************I now need to read the "segment" that start with " *** blablabab *** " and ends with " ************** " and store the lines of this segment to another text file "B.txt".
    So "B.txt" has let's say this "segment".
    ***second***
    this is 1 line in second
    this is  2 line in second
    this is 3 line in second
    **************How can I do this? I know how to read/write from/to a text file with FileReader and BufferReader but I have no idea how to experiment with this. Is there anyone who can give me a hint or a help to start?
    I am very new to java so be gentle :-)
    Thank you very much in advance.
    Kostas

    Well this is a very good and I think efficient way to
    do but unfortunately I don't have a clue about regex
    and how they work. This is something I should learn.
    With the expression you wrote I would have each text
    block at a time? This will be stored then to an
    Arraylist like above? If you have another idea please
    suggest. I am interested in learning new tricks :-)
    Thanks for your reply notivago!!!
    KostasRegular expressions have a somewhat steep learning curve but they are worthy the effort, they are fast and powerfull text finding tools, the whole idea is that you search the text for some pattern. I will provide you a sample code, it is half way to solve your problem, you will have to make some minor adjustements to use it you your real application(none in the RE itself I hope).
    To understand it, look at the Pattern class documentation and the Matcher class documentation in the API.
    * SectionExtractor.java
    * version 1.0
    * 25/05/2005
    package samples;
    import java.util.regex.Matcher;
    import java.util.regex.Pattern;
    * @author notivago
    public class SectionExtractor {
         * @param args
        public static void main(String[] args) {
            String text =
                     "***first***\r\n" +
                      "this is 1 line in first\r\n" +
                      "this is  2 line in first\r\n" +
                      "this is 3 line in first\r\n" +
                      "**************\r\n" +
                      "***second***\r\n" +
                      "this is 1 line in second\r\n" +
                      "this is  2 line in second\r\n" +
                      "this is 3 line in second\r\n" +
                      "**************\r\n" +
                      "***third***\r\n" +
                      "this is 1 line in third\r\n" +
                      "this is  2 line in third\r\n" +
                      "this is 3 line in third\r\n" +
            Pattern pattern = Pattern.compile( "\\*{3}(.+?)\\*{3}$(.*?)\\*{14}", Pattern.DOTALL | Pattern.MULTILINE);
            Matcher matcher = pattern.matcher(text);
            matcher.find();
            System.out.println( "Header: " + matcher.group(1) );
            System.out.println( "Text Body: \n" + matcher.group(2) );
    }The sample as is, runs and give you output that should be clear on how the expression works. Try running it.
    May the code be with you.

  • Warp certain areas in a photo, PLEASE help.

    I know that PSE 9 does not come with a "warp" feature (in transform or free transform).
    Example scenario: In a photo of a face, I want to flatten or extend his nose.
    Is it possible to select a certain area of photo and distort that area. Or any suggestion.
    Thank you.

    Ah..."Mesh Warp" was the phrase I was trying to think of.  Thanks for jogging my memory.
    You can select an area in the photo and have the Liquefy distortion only affect that selected area.  The distortion won't go beyond the selected area, however.
    Ken

  • How do you darken a certain area with CS5?

    Is there a way to darken a certain area, such as hair, on a picture using Photoshop CS5?
    Thank you

    Or just select the hair and make the adjustments directly.  Some refer to this as "destructive" editing, but I prefer to consider it "constructive".
    You can see a pretty neat tutorial described in this thread, by the way:  http://forums.adobe.com/thread/653534
    -Noel

  • RAM PREVIEW CERTAIN AREA???

    A couple months ago I Was watching AE tutorials On YouTube, and came across one where the instructor demonstrated how to RAM Preview certain areas of the timeline, and at the time I did not need that information. Now I do and I cant find the video, nor do I remember how do it, please somebody help me!

    Simple: you limit the Work Area.
    Put your timeline cursor where you want the preview to start.  Hit the b (for Begin) key.  Notice how the Work Area marker jumps to that point.
    Put your timeline cursor where you want the preview to stop.  Hit the n (for eNd) key.  The marker for the end of the Work Area jumps to that point.
    Now preview.
    You can move the Work Area markers around by the click-drag technique, too.  Don't forget to put them back when you're done.

  • My niece dropped my iphone and now i cant get past my password screen because its unresponsive in a certain area, what do i do?

    My niece dropped my iphone and now i cant get past my password screen because its unresponsive in a certain area, what do i do?

    hand it in for repair?

  • What is this green light in my i5 screen? itlighten the colors of certain areas in my phone and it also makes them blurry.

    what is this green light in my i5 screen? itlighten the colors of certain areas in my phone and it also makes them blurry.

    Psst. Your excess luma is showing.
    Don't forget to search:
    http://discussions.apple.com/thread.jspa?messageID=1077165&#1077165
    Dual 2.5 G5   Mac OS X (10.4.3)   4 GB RAM, DeckLink HD Pro, XRAID

Maybe you are looking for