Disabling app_dfefault_island folder  when using application log

Hello. Is there a way to OC4J use the exactly log path setted in orion-application.xml ? I mean, I edited orion-application.xml to something like
<log>
<file path="file:///c:/apps/myApp.log" />
</log>
but when I start server, I have my log saved in C:/apps/MyOC4JInstance_default_island_1/myApp.log instead of C:/apps/myApp.log.

For XI r2, try turning off DEP.  It could have something to do with XI r2 runtime not being compiled with the /NX switch
Try running the app pool in u201CClassicu201D mode rather than u201CIntegratedu201D mode for CR XI r2 or CR 2008.
If it is permissions, try running processmon to see where the access issue is occurring. ProcMon can be downloaded from here:
http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx
Ludek

Similar Messages

  • Problems creating a new folder when using webmail

    Hi, has anyone else out there encountered problems when trying to create a new folder when using webmail ?
    It just seems to create a new folder called 'New Folder' and misses out the step that would normally allow you to rename it to a title of your choice.
    A whole list of folders called 'New Folder' is about as useful as an ashtray on a motorbike.
    It did used to work as I've used it many times in the past.....but then so did a lot of things before the 'new' and 'improved' version of BT Mail came along.
    Any help or suggestions gratefully received (apart from the obvious solution, switch to a mail client).
    Maybe it needs flagging to the 'techies'......they must be really busy trying to sort out all the so called teething problems.
    Solved!
    Go to Solution.

    What should happen is that when you click on the + for add a new folder a box should appear, somewhere amongst the folder list. (The list is in alphabetical order so if you have a number of folders previous to the letter N it maybe out of view ) .
    The box will have the text " New folder-X," ( see below for the explantion for the -X ) you then delete the text, type in the name you want, hit enter and there it is.
    If you don't notice the box, possibly because it's off screen further down the list, you then open and close the list, or log out the next time you view the list it, or they, are simply named New folder.
    So you now have umpteen " New folders ", here's how to rename them.
    Place your cursor on the word New Folder in your folder list, you will see a little box appear with" New folder-X,"  x being the number of the new folders you have created., eg -0, -1, -2 etc.
    Then double click on it, you should then get a larger box with New folder-X.
    Delete the text in the box, type in the name you want for the new folder, hit enter there's you newly named folder.

  • N8 : ractivate help when using applications

    N8 can show help (clue) when using application. I have de-activated by mistake but i can't find how to reactivate it. Do you know how ?
    Thank you.

    Menu-->applications-->User Guide..
    or
    If you are already in the application... Options-->User Guide.
    If this is what you wanted..
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Disable print output when using bapi BAPI_GOODSMVT_CREATE

    Hello,
    I am using BAPI BAPI_GOODSMVT_CREATE to post material documents in our programs.
    I wish to prevent the print output of the documents created by the BAPI.
    Meaning - when the user post good movement using MIGO, there will be a printout of the movement, but if the movement is created using BAPI_GOODSMVT_CREATE, no output will be printed.
    I have tried sending blank values in fields VER_GR_GI_SLIP & VER_GR_GI_SLIPX in GOODSMVT_HEADER structure, but to no avail.
    Is there a way to disable printing ONLY when using the BAPI?
    Thank you very much.

    Hi,
    We cant restrict the print preview or print out of the material document. Once the condition record has maintianed for the material document, it ll applicable for all the material doc . It would be manual Gr or BAPI GR.
    In your case Print is coming automatically or user is taking the print !!
    Regards,
    Dhanush.

  • Disable finger input when using stylus

    Hi,
    It would be really very useful for those of us with Galaxy Notes to have an option to disable finger input when using the device's stylus. It could be that finger input should still be usable for pinch/zoom etc., but not for drawing or erasing.
    An on-screen toggle button for this would be ideal, as in the Galaxy S-Note app, but even an option in the app preferences would be excellent.
    This would make a great mobile app even better.
    Please add a comment if you would find this useful.
    Thanks,
    Mike

    I think this is a good idea, with the proviso (as you mentioned), that you could still use the two finger pan/zoom (and three finger 100% zoom toggle).
    Why don't you stick this in the ideas section? Then people can vote on it.

  • Who uses Application Logs?

    Hey there, I just wanted to understand more about the usage of application logs.  Do any of you use it for debugging/analysis purposes of your applications?  For those that use it, would you mind explain how you use it etc.
    Sorry, I'm pretty much an ABAP newbie.

    I used Application Logs to get errors or other messages for RFC Calls etc in most of my Custom BAPIs.
    See this\
    http://help.sap.com/saphelp_nw04/helpdata/en/3a/c8263712c79958e10000009b38f936/content.htm
    It doesnt help you much but definetly gives you some idea.
    There are a bunch of function modules to help in getting Application Logs. Theoritically an Application Log is similar to System Log. But System Log is for the whole SAP system where are an Application log is specific to the Custom Object (and sometimes even sub-object) that you create and assign to.
    Pros: If improves performance by reducing number of database hits and writing the logs locally.
    Cons: A lot of effort is needed for initial setup.
    If this helps, award points suitably.

  • How can I save a reply email to drafts folder when using hotmail on my ipad2 with safari ??

    It appears that the iPad mail app cannot push drafts so I can access them on a pc.     If there is a way to do this, I would like to know
    If the above is not possible, I'd like to know how to save a reply email to the drafts folder when accessing hotmail on my iPad from safari.   I can't seem to find a button on the hotmail pag, or any help instructions anywhere.     I hav done this for years using a pc with Firefox or explorer with no problem.  This has to be so easy that it will seem like I asked q stupid Ustinov when I get the answer!

    I am still waiting for an answer.    If you don't know the answer, but know who to ask or where to look to find an answer, I'd really appreciate it.

  • K3011w - How disable the touchpad when using USB mouse?

    Is there a way to disable the touchpad on the docking keybd when using a USB mouse? It is a real pain typing along and be in the middle of sentence some where else on the page.

    hi whippetguy,
    Thanks for Posting,
       The touchpad on the dock uses a Windows driver and does not have any special Software to Disable it via shortcut,
    How I found to go around on what you need is
      With the tablet on the dock with no USB mouse yet
                      Press (Windows key+x) and choose device manager on the list
                            On Device Manager window open mice and pointing device and rightclick disable
    This should disable the dock touchpad and Now you can plu in your USB mouse,
    Before you unplu your USB mouse after use, Go to device manager again and Enable the device you disabled.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Error when using Application Designer to logon

    Good day experts,
    I have just installed PeopleSoft 8.51 on the server, and have just configured the PSADMIN. When I tried to logon using Application Designer in 3-tier mode, I got an error as follows
    "An error occurred on the application server within Tuxedo while returning the service GetCertificate. Cancel the current operation and retry. If the problem persists, contact your system administrator"
    I have retraced my steps and it was installed as per the installation guide, and I cannot find any cases that address this issue.
    Can someone shine some lights on this error?
    Thank you very much in advance. Any help is highly appreciated.
    Thank you
    Mark

    I have solved this issue. What's happened was that I was using Oracle Tuxedo 11gR1 which is not supported by PT8.51. Uninstalled 11gR1 and installed 10gR3, and everything is working fine now.

  • Slow/Crash Safari 6.0 (7536.25) when using Console Log

    Hello,
    I've updated my Safari just an hour ago (I'm on Lion).
    Currently I'm using it for webdevelopment, but after the update I can't refresh pages anymore when the console log is open. This causes the browser to load very very slow until it does nothing.
    When I close the Console Log the page loads again.
    A collegue also has issues when Javascript has generated an error his browser just closes.
    This is making webdeveloping a nightmare.
    Is there any way to solve this issue or atleast revert back to a previous version that does work.
    Regard,
    Michael

    Hello,
    I've updated my Safari just an hour ago (I'm on Lion).
    Currently I'm using it for webdevelopment, but after the update I can't refresh pages anymore when the console log is open. This causes the browser to load very very slow until it does nothing.
    When I close the Console Log the page loads again.
    A collegue also has issues when Javascript has generated an error his browser just closes.
    This is making webdeveloping a nightmare.
    Is there any way to solve this issue or atleast revert back to a previous version that does work.
    Regard,
    Michael

  • Restricting the folder when my application is visible.!!!HELP!!!!

    How can I restrict a particular folder not to click on it or not to open it when my application is visible.When my application disappear then I will be allow to open it by clicking on it.How it is possible.Thanks for any help.....

    help plz.

  • Where are BLOB Files stored when using redo log files.

    I am using Archive Log Mode for my backups. I was wondering if Blob files get stored in the redo log files or if they are archived somewhere else?
    Rob.

    BLOB are just columns of some tables and are stored in related tablespace table by default in their own segments. Changes to BLOB columns are also stored in redo log more or less like any other column.
    See an short example for default LOB storage in Re: CLOB Datatype [About Space allocation]
    Edited by: P. Forstmann on 27 avr. 2011 07:20

  • How to use Application log (slg0 & slg1)

    Hi all,
    Can u please give me some hints to utilize Application log?
    Hope you will help me.
    Thanq in advance,
    Bye.

    hi John,
       Check these FM's out
    BAL_GLB_SEARCH_LOG            
    BAL_LOG_CREATE                
    BAL_LOG_EXC_ADD               
    BAL_LOG_HDR_CHANGE            
    BAL_LOG_HDR_READ              
    BAL_LOG_MSG_ADD               
    BAL_LOG_MSG_ADD_FREE_TEXT     
    BAL_LOG_MSG_CHANGE            
    BAL_LOG_MSG_CUMULATE          
    BAL_LOG_MSG_DELETE            
    BAL_LOG_MSG_DELETE_ALL        
    BAL_LOG_MSG_READ              
    BAL_LOG_REFRESH               
    SBAL_DETAIL                    Application Log: Display: Detail Screens                              
    BAL_DSP_LOG_PARAMETERS         Application Log: Display: Display log header parameter set            
    BAL_DSP_LOG_TECHNICAL_DATA     Application Log: Display: Display log header technical data                                                                               
    SBAL_DISPLAY                   Application Log: Display Log                                          
    BAL_DSP_LOG_DISPLAY            Application Log: Fullscreen log output                                
    BAL_DSP_LOG_PRINT              Application Log: Print log                                                                               
    SBAL_PROFILE                   Application Log: Display Profile                                      
    BAL_DSP_PROFILE_SINGLE_LOG_GET Application Log: Display profile: Standard profile (SLG1) for one log                                                                               
    SBAL_SERVICE                   Application Log: Service Functions                                    
    BAL_LOG_HDR_CHECK              Application Log: Log: Header data: Check                              
    BAL_LOG_MSG_CHECK              Application Log: Log: Message: Check                                                                               
    SBAL_TOOLBOX                   Application Log: Toolbox                                              
    BAL_DB_LOGNUMBER_GET           Application Log: Database: Get internal log number from number range  
    BAL_LOG_DELETE                 Application Log: Log: Delete log (from DB also at save)               
    BAL_LOG_EXIST                  Application Log: Log: Check existence (in memory)                     
    BAL_LOG_MSG_EXIST              Application Log: Log: Message: Check existence (in memory)            
    BAL_LOG_MSG_REPLACE            Application Log: Log: Message: Replace last                           
    BAL_STATISTICS_LOG_GET                                                                               
    BAL_STATISTICS_LOG_SET                                                                               
    Regards,
    Santosh
    Note: Reward Points if helpful

  • Unable to look at ony oher folder but my inbox folder when using outlook email

    When using outlook and I open my email, I am only able to look at emails in my inbox, any other directories it will not open them for me since the upgrade.
    I then have to use Explorer and have no problems going through the different directories and being able to see emails that I have filed.
    Theresa

    What does that have to do with Firefox?

  • When using two log ins how do I migrate one to a new macbook pro

    I have a macbook pro that is 3 years old and have recently purchased the new retina macbook pro.  My husband will continue to use the older model and he has his files, contacts and music when he logs in but I also have mine when I log on the same machine.  I will want to separate that when I migrate my information to the new machine.  I am happy to delete my files from the old machine once it is transferred and let him have the extra memory.  We have the Time Machine connected for back ups.

    Why not restore your user account from your Time Machine backup?
    You can also connect the two via Firewire ports, boot the old computer into Target Disk Mode, then use Migration Assistant to migrate just your user account.

Maybe you are looking for

  • Where is the back button on iphone 5?

    Hi, new to iphones. When I open an app like email, text message,  often I find there is no way to go back one screen other than hitting the home button to end the app. Am I missing something here? Is there a back button like Safari has but for the ph

  • How can I get the remote control button to appear in itunes?

    I cant seem to locate the remote control button that is supposed to appear in iTunes. I do not have any remote controls associated with my iTunes yet the button is not appearing. Help.

  • Multiple FileFilter in a JFileChooser

    I wanna have a save file dialog with a list of choosableFileFilter that the user can select. Here is my code : import java.io.File; import javax.swing.filechooser.FileFilter; public class ImageFilter extends FileFilter {     private static String des

  • Hyperion Planning : multiple hierarchies for a dimension ?

    Hi, Is it possible into planning 9.2 to manage multiple hierarchies for a dimension ? I didn't found that in the documentation but I had already listened that there is a workaround to do that. Regards

  • 2 ipads and 1 account

    I just bought a second ipad and i will be keeping both.  I want to have same identical apps on both phones.  How do I set this up?  Do I have to name both ipads the same or do they have to have different names?  I want to be able to play an app on on