Disable print output when using bapi BAPI_GOODSMVT_CREATE

Hello,
I am using BAPI BAPI_GOODSMVT_CREATE to post material documents in our programs.
I wish to prevent the print output of the documents created by the BAPI.
Meaning - when the user post good movement using MIGO, there will be a printout of the movement, but if the movement is created using BAPI_GOODSMVT_CREATE, no output will be printed.
I have tried sending blank values in fields VER_GR_GI_SLIP & VER_GR_GI_SLIPX in GOODSMVT_HEADER structure, but to no avail.
Is there a way to disable printing ONLY when using the BAPI?
Thank you very much.

Hi,
We cant restrict the print preview or print out of the material document. Once the condition record has maintianed for the material document, it ll applicable for all the material doc . It would be manual Gr or BAPI GR.
In your case Print is coming automatically or user is taking the print !!
Regards,
Dhanush.

Similar Messages

There is no printer output when using the PrintOut method

I have a VB6 app with CR XI, and a customer found a situation that when printing a report directly to the printer using the PrintOut method, there is no printer output or error message.
Some reports using the same code print normally, but a report that is preceded by another print call, presents this behavior.
And when the output is directed to the screen, we can see the report.
Could someone give me an idea of what is the problem?
Thanks,
Isis
SP - Brazil
The code used is below:
                   Set rpt = applic.OpenReport(App.Path & "SEFoto" + TipoRPT + ".rpt")
                   rpt.FormulaSyntax = crCrystalSyntaxFormula
                   rpt.FormulaFields.GetItemByName("Empresa").Text = "'" + Company + "'"
                   rpt.FormulaFields.GetItemByName("Idioma").Text = "'" + Idioma + "'"
                   rpt.FormulaFields.GetItemByName("Versao").Text = "'" + Versao + "'"
                   ' ... Some lines to compose the selection formula
                   rpt.RecordSelectionFormula = Cond
                   ' To evaluate the image length:
                   Arq = rsTMP3!FT_Arquivo
                   ImageScaling = FatorDeReducao(Arq, "F")
                   ' To reduce the image length:
                   AchouOLE = False
                   For Each oSection In rpt.Sections
                       For Each oObject In oSection.ReportObjects
                           If oObject.Name = "PictureFoto" Then
                              Set oOleObject = oObject
                              AchouOLE = True
                              Exit For
                           End If
                       Next oObject
                       If AchouOLE Then Exit For
                   Next oSection
                   With oOleObject
                        .Suppress = True
                        .XScaling = ImageScaling    ' 0.5 = 50%, 1 = 100%
                        .YScaling = ImageScaling
                        .Suppress = False
                   End With
                   Aguarde.Show 1
                   If DestinoRel = 9 Or DestinoRel = 1 Then ' Padrão ou impressora
                      rpt.PrintOut True              ' <<<---- Here using true or false nothing happens
                   Else
                      PrintRPTtela rpt, "Fotos"   ' <<<--- Here it works fine
                   End If

Hi Isis,
Not sure if you have applied any service Packs to CR? If please do so and test again. Then you can upgrade to CR XI R2 for free, use your XI Keycode and download Service Pack 4 from this link:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
You'll find the distribution files for your app also from that same download area.
If you don't want to upgrade to XI R2 then download all patches from XI and test again. This issues rings a bell that it may have been fixed.
Thank you
Don

How to produce Material output message when use bapi function?

Dear Experts :
I use bapi BAPI_GOODSMVT_CREATE to receive stock.
I find the output message can't create automatically even when I have set the type in MR21.
Hope someone can teach me how to produce the message when I create the material document by BAPI function.
Thanks a lot.

Hi,
The messages are stored in the return table of the bapi.
You can search in SCN or Google for BAPI error handling.

Goods issue using bapi BAPI_GOODSMVT_CREATE getting error E M7

HI consultants,
While posting goods issue using bapi BAPI_GOODSMVT_CREATE . Running the batch job(zprogram) to post the goods issue . The goods issue is been posted by passing goods receipt data's.
while processing 3 goods receipt , 2 works fine one goods receipt getting E M 7 300 NO ITEMS ARE TRANSFERED error.
when i processing one by one all the 3 goods receipt is working fine and process sucessfully. While processing in bulk ,i am getting this issue.
If anybody faces this same problem or knows the solution .Please post the answer.
The way i am passing the parameter to bapi given bellow.
    WA_GOODSMVT_CODE-GM_CODE = C_03.
*--populate header data
    WA_GOODSMVT_HEADER-DOC_DATE   = WA_MKPF-BLDAT.
    WA_GOODSMVT_HEADER-PSTNG_DATE = WA_MKPF-BUDAT.
*--populate item data
*-- call the bapi for posting goods issue
             IT_GOODSMVT_ITEM-NETWORK     = WA_RESBP-AUFNR.
            IT_GOODSMVT_ITEM-RESERV_NO   = WA_RESBP-RSNUM.
            IT_GOODSMVT_ITEM-RES_ITEM    = WA_RESBP-RSPOS.
            IT_GOODSMVT_ITEM-ACTIVITY    = WA_RESBP-VORNR.
            IT_GOODSMVT_ITEM-MOVE_TYPE   = C_281.
            IT_GOODSMVT_ITEM-ENTRY_QNT   = WA_RESBP-NET.
*--get the item details
              IT_GOODSMVT_ITEM-MATERIAL   = WA_MSEG-MATNR.
              IT_GOODSMVT_ITEM-PLANT      = WA_MSEG-WERKS.
              IT_GOODSMVT_ITEM-STGE_LOC   = WA_MSEG-LGORT.
              IT_GOODSMVT_ITEM-ENTRY_UOM = WA_MSEG-ERFME.
              CALL FUNCTION 'CONVERSION_EXIT_ABPSP_OUTPUT'
                EXPORTING
                  INPUT = WA_MSEG-PS_PSP_PNR
                IMPORTING
                  OUTPUT = WA_PSPHI_TEMP.
              IT_GOODSMVT_ITEM-WBS_ELEM   = WA_PSPHI_TEMP.
              APPEND IT_GOODSMVT_ITEM.
            CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
              EXPORTING
                GOODSMVT_HEADER = WA_GOODSMVT_HEADER
                GOODSMVT_CODE    = WA_GOODSMVT_CODE
              IMPORTING
                MATERIALDOCUMENT = WA_MATERIALDOCUMENT
              TABLES
                GOODSMVT_ITEM    = IT_GOODSMVT_ITEM
                RETURN           = IT_RETURN.
With Regards,
Ambrose Mohandoss.

Problem solved.

Error when using BAPI

Please find herewith my below code. This program i have created for transferring goods with mvt type '657' to '555' using BAPI 'BAPI_GOODSMVT_CREATE' for TCODE MB1A.
*& Report Z_BAPI_FOR_MB1A
REPORT Z_BAPI_FOR_MB1A.
Tables : mkpf, mseg, WB2_V_MKPF_MSEG2.
DATA:
it_mb1a LIKE BAPI2017_GM_ITEM_CREATE OCCURS 0 WITH HEADER LINE,
it_return LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,
it_ex_headret LIKE BAPI2017_GM_HEAD_RET OCCURS 0 WITH HEADER LINE,
it_im_header LIKE BAPI2017_GM_HEAD_01, " OCCURS 0, " WITH HEADER LINE,
it_im_gmcode LIKE BAPI2017_GM_CODE, " OCCURS 0, "WITH HEADER LINE,
mat_doc type bapi2017_gm_head_ret-mat_doc,
mat_docyear type bapi2017_gm_head_ret-doc_year.
*data : lv_intense(01).
data : it_mseg like WB2_V_MKPF_MSEG2 occurs 0 with header line,
       it_cost like csks occurs 0 with header line.
selection-screen begin of block a with frame title text-001.
parameters: p_date type sy-datum default sy-datum.
select-options: so_budat for WB2_V_MKPF_MSEG2-budat,
                so_werks for WB2_V_MKPF_MSEG2-werks_i,
                so_matnr for WB2_V_MKPF_MSEG2-matnr_i,
                so_lgort for WB2_V_MKPF_MSEG2-lgort_i.
selection-screen end of block a.
select * from WB2_V_MKPF_MSEG2 into
table it_mseg where
budat in so_budat and
werks_i in so_werks and
matnr_i in so_matnr and
lgort_i in so_lgort and
bwart_i = '657'.
select * from csks into table it_cost
for all entries in it_mseg where
gsber = it_mseg-werks_i.
*Filling BAPI Header Tables
it_im_header-pstng_date = sy-datum.
it_im_header-doc_date = sy-datum.
it_im_gmcode-gm_code = '03'.
*Filling BAPI Item Tables
loop at it_mseg.
read table it_cost with key gsber = it_mseg-werks_i.
it_mb1a-material = it_mseg-matnr_i.
it_mb1a-plant = it_mseg-werks_i.
it_mb1a-stge_loc = it_mseg-lgort_i.
it_mb1a-batch = it_mseg-charg_i.
it_mb1a-move_type = 555. " '103'.
it_mb1a-entry_qnt = it_mseg-menge_i.
it_mb1a-costcenter = it_cost-KOSTL.
it_mb1a-gl_account = '530089'.
append it_mb1a.
clear it_mb1a.
clear it_cost.
endloop.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    goodsmvt_header               = it_im_header
    goodsmvt_code                 = it_im_gmcode
*   TESTRUN                       = ' '
*   GOODSMVT_REF_EWM              =
IMPORTING
   GOODSMVT_HEADRET              = it_ex_headret
   MATERIALDOCUMENT              = mat_doc
   MATDOCUMENTYEAR               = mat_docyear
tables
    goodsmvt_item                 = it_mseg
*   GOODSMVT_SERIALNUMBER         =
    return                        = it_return
*   GOODSMVT_SERV_PART_DATA       =
*   EXTENSIONIN                   =
if sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
   WAIT          = 'X'
* IMPORTING
*   RETURN        =
endif.
But when i execute the above i am getting the following error.
Runtime Errors         CALL_FUNCTION_UC_STRUCT
Except.                CX_SY_DYN_CALL_ILLEGAL_TYPE
Date and Time          27.01.2009 14:43:06
Short text
     Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "Z_BAPI_FOR_MB1A" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
      not caught and
     therefore caused a runtime error.
     The reason for the exception is:
     In the function "BAPI_GOODSMVT_CREATE", the STRUCTURE parameter "GOODSMVT_ITEM"
      is typed in such a way
     that only actual parameters are allowed, which are compatible in Unicode
      with respect to the fragment view. However, the specified actual
     parameter "IT_MSEG" has an incompatible fragment view.
Missing Handling of System Exception
     Program                                 Z_BAPI_FOR_MB1A
Trigger Location of Exception
    Program                                 Z_BAPI_FOR_MB1A
    Include                                 Z_BAPI_FOR_MB1A
    Row                                     72
    Module Name                             START-OF-SELECTION
Source Code Extract
Line SourceCde
   42 lgort_i in so_lgort and
   43 bwart_i = '657'.
   44
   45 select * from csks into table it_cost
   46 for all entries in it_mseg where
   47 gsber = it_mseg-werks_i.
   48 *Filling BAPI Header Tables
   49 it_im_header-pstng_date = sy-datum.
   50 it_im_header-doc_date = sy-datum.
   51 it_im_gmcode-gm_code = '03'.
   52
   53 *Filling BAPI Item Tables
   54 loop at it_mseg.
   55
   56 read table it_cost with key gsber = it_mseg-werks_i.
   57
   58 it_mb1a-material = it_mseg-matnr_i.
   59 it_mb1a-plant = it_mseg-werks_i.
   60 it_mb1a-stge_loc = it_mseg-lgort_i.
   61 it_mb1a-batch = it_mseg-charg_i.
   62 it_mb1a-move_type = 555. " '103'.
64 it_mb1a-costcenter = it_cost-KOSTL.
65 it_mb1a-gl_account = '530089'.
66
67 append it_mb1a.
68 clear it_mb1a.
69 clear it_cost.
70 endloop.
71
72*>>>> CALL FUNCTION 'BAPI_GOODSMVT_CREATE'* 73   EXPORTING
74     goodsmvt_header               = it_im_header
75     goodsmvt_code                 = it_im_gmcode
76 *   TESTRUN                       = ' '
77 *   GOODSMVT_REF_EWM              =
78 IMPORTING
79    GOODSMVT_HEADRET              = it_ex_headret
80    MATERIALDOCUMENT              = mat_doc
81    MATDOCUMENTYEAR               = mat_docyear
82   tables
83     goodsmvt_item                 = it_mseg
84 *   GOODSMVT_SERIALNUMBER         =
85     return                        = it_return
86 *   GOODSMVT_SERV_PART_DATA       =
87 *   EXTENSIONIN                   =
88           .
89 if sy-subrc = 0.
90 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
91 EXPORTING
Can u explain why this is coming. Your valuable suggestions are required.
Thanks,
Jitesh M Nair

Hi,
Try this Code.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          GOODSMVT_HEADER       = WF_HEADER
          GOODSMVT_CODE         = WF_CODE
          TESTRUN               = WL_space
        IMPORTING
          MATERIALDOCUMENT      = FS_MATERIAL_DOC
        TABLES
          GOODSMVT_ITEM         = INT_ITEM
          GOODSMVT_SERIALNUMBER = INT_SERIALNO
          RETURN                = INT_RETURN1.
*VARIABLES for goods movement creation bapi
DATA : WF_HEADER TYPE   BAPI2017_GM_HEAD_01,
       WF_CODE    TYPE   BAPI2017_GM_CODE.
DATA : FS_MATERIAL_DOC   TYPE BAPI2017_GM_HEAD_RET-MAT_DOC,
       FS_SERIALNO       TYPE BAPI2017_GM_SERIALNUMBER,
       FS_ITEM           TYPE BAPI2017_GM_ITEM_CREATE,
       FS_RETURN1        TYPE BAPIRET2,
data declaration for goods movement creation bapi
DATA : INT_ITEM     TYPE TABLE OF BAPI2017_GM_ITEM_CREATE,
       INT_SERIALNO TYPE TABLE OF BAPI2017_GM_SERIALNUMBER,
       INT_RETURN1 TYPE TABLE OF BAPIRET2.
Hope this will help.
Regards,
Rohan.

Unable to transfer post the document using BAPI "BAPI_GOODSMVT_CREATE"

Hi Experts,
I am unable to post the document using BAPI "BAPI_GOODSMVT_CREATE", getting error "_Sales order stock --- does not exist_"
details are stated below:
GM_CODE : 04, it is working fine for the scenario with same saleorder number and line item, but when i give same sale order number and different line item, then i am getting the above error.
Example : Posting from Saleorder A with line item 100 to saleorder A with lineitem 100 its working fine, but when we are posting
                from Saleorder A with lineitem 100 to saleorder A with line item 200 it is not working.
Also When I trying to do with the transaction MB1B manually, it is working fine. kindly suggest me.
Needed Urgently....
Appreciate for you early response.
Regards,
Sathya.
Edited by: Sathyanarayana Raghavendra on May 6, 2010 1:00 PM

Hi,
Hi Did you call Function BAPI_TRANSACTION_COMMIT' after calling the BAPI.    ?
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = c_x.
Regards,
Jovito.

Can not print report when using HTML or DHTML

Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
Any Ideas?
Thanks
Jeff

Hi,
I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
Thanks,
SK.

Error while using BAPI BAPI_GOODSMVT_CREATE for Momvent type 321

Hi Guys,
We trying to transfer material from Inspection to Un.Stock by using momvent type 321...In SAP we do QVM1 and do stock postion.
We are using BAPI BAPI_GOODSMVT_CREATE getting this error " E QA 495 Change the inspection stock of material 11036125 in QM only".
Any one have any idea how to overcome this issue.
Atul

Hi Sachin,
Pass the Item Number of Reservation to GOODSMVT_ITEM-RES_ITEM .
Regards
DKS

Creation of GR from Contract using bapi BAPI_GOODSMVT_CREATE

Hi,
As per requirement I need to create a GR for Contract line item. I tried to create using BAPI BAPI_GOODSMVT_CREATE but It returns the error message. I tried with GM_CODE '05', so could you please let me know which are the parameters I need to pass to create GR?
Thanks,
Nishad Shah

Hi,
Populate header, code, item and return table
In header populate PSTNG_DATE ,DOC_DATE ,PR_UNAME(if u have additional information then pass those also)
In Item table MOVE_TYPE ,MVT_IND ,PO_NUMBER ,MATERIAL,PLANT ,STGE_LOC ,PO_ITEM = POITEM-PO_ITEM,ENTRY_QNT .
MVT_IND filed u can leave it as blank as GM_CODE is 05.
Regards,
Sajith

HP Photosmart 8750 prints slow when using Photo Gray Cartidge

HP Photosmart 8750 prints slow when using Photo Gray Cartidge ... sometimes indicates Black Cartridge failed, however upon reinserting works slow

Welcome to the HP Forums ButchG,
I see by your post that when printing with the photo gray cartridge the black cartridge will indicate that it has failed.
I can help you with this issue.
I would do a power reset to see if that will resolve the issue.
With the printer still turned on, disconnect the power cable from the back of the printer, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it.
Hold down the power button for 10 seconds to drain the power.
Then disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for the cleaning the contacts and reseating the cartridge.
'Cartridge Failed' or 'Cartridge Not Compatible' Error Message.
What are the ink levels?
Are you using Genuine HP Cartridges?
Check the date on the cartridges to make sure they are still in warranty. (not old stock)
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Update field LSMNG in MIGO transaction using bapi bapi_goodsmvt_create

Hi ,
I am using bapi bapi_goodsmvt_create for creating goods receipt against purchase order in which I have to update field LSMNG i.e. Del. Note Qty. But this field is not there in BAPI input parameters/table fields.
How i can update this field using the same bapi
Thanks and regards
Deepak Sharma

Hi,
Can I update this field using BAPI bapi_goodsmvt_create.
thanks
Deepak

How to transfer range parameter from vb when using bapi calling

Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

Did you get the solution to your problem? Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

Disable finger input when using stylus

Hi,
It would be really very useful for those of us with Galaxy Notes to have an option to disable finger input when using the device's stylus. It could be that finger input should still be usable for pinch/zoom etc., but not for drawing or erasing.
An on-screen toggle button for this would be ideal, as in the Galaxy S-Note app, but even an option in the app preferences would be excellent.
This would make a great mobile app even better.
Please add a comment if you would find this useful.
Thanks,
Mike

I think this is a good idea, with the proviso (as you mentioned), that you could still use the two finger pan/zoom (and three finger 100% zoom toggle).
Why don't you stick this in the ideas section? Then people can vote on it.

Cannot print anything when using safari

Cannot print anything when using safari. OSX is Mavericks. Printer is Canon MP620. Have downloaded Mavericks software for printer, but still will not print. I have also repaired the disk hoping that would solve the problem, but to no avail. Can anyone help me please?

Hey ivorfromborehamwood,
Thanks for using Apple Support Communities.
For more information, take a look at:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Have a nice day,
Mario

Getting error while using BAPI 'BAPI_GOODSMVT_CREATE'

Hi,
I am using the BAPI 'BAPI_GOODSMVT_CREATE' in program for goods issue i.e code 03.I am providing all details. the quatity is in KG and i am also providing ISO code i.e KGM but still getting error that Deficit of BA Unrestricted-use 32,900 KG .what would be the problem.

Hi There,
Please check if the PO in question has GR-based IV set to active. In this case please refer to the SAP note 109396 which explains how the IDoc segment has to be filled in order for the posting be successful. The IDoc has to be filled as described in the note when try to post with this particular constellation (i.e. GR-based IV active, more than one goods receipt for the line item, first goods receipt already reversed). Normally when posting in dialog the user has to choose the correct line item to reverse. In the case of IDoc/BAPI processing this is not possible so these particular fields have to be filled at the interface so that the system finds the correct document to reverse.
I hope this helps,
Best Regards,
Elaine.

Disable print output when using bapi BAPI_GOODSMVT_CREATE

Similar Messages

Maybe you are looking for