Disabling the systemTrayIcon property in displayTemplate dont work
I've tried to update an older application, builded with
Director 8.5 and using a couple of MIAWs, to Director MX 2004. All
work fine but the MIAWs, using either the new DisplayTemplate panel
AND Lingo have a strange behavior: print their icons into the
system tray, except if the type of the window = #tool. I need to
have some MIAWs in modal way and to obtain this the only way is
setting the window type = #dialog. But, in this case, into the
system tray appear the icon of the MIAW, togheter the icon of the
projector. I have not found any workaround...
Below there is an example of lingo used to test the property
setting:
global myMiawPath
on startMovie
myMiawPath = the moviePath & "Components\about.dxr"
openAbout
end
on openAbout
window().new ("about")
window("about").filename = myMiawPath
window("about").type = #document
window("about").titlebarOptions.visible = FALSE
window("about").appearanceOptions.border = #none
window("about").systemTrayIcon = FALSE -- THIS WOULD BE A
SOLUTION...
window("about").open()
window("about").visible = TRUE
end
but don't work: the icon in the system tray is ALWAYS visible
since the type of window is different from #tool. Anyone have
encountered the same (very fastidious) problem? And there is any
solution? Thanks very much.
Create an ini file beside your projector and include the
following:
[Settings]
SingleTaskbarEntry=1
Similar Messages
-
Can any1 hlp i hav an IPhone4 and the volume is so low i can barely hear the person frm the other phone, i try using volume bt it dont work?
Did you try turning up the volume button on the left side, Also go into your settings>sounds and try to change the volume.
-
So yeah im not happy with the mountain lion update, i was looking forward to getting it, got it, and i do not like it..
I dont like that the fact they have blocked java applets running and i now can no longer play games, and access some online stuff, i just want lion back ;(,
I am happy to wipe the hard drive as i have backup, however my install disk doesnt work and was wondering if there is a way around this?
Also i have a late 2009 imacThe Java thing is not specific to Mountain Lion. Wen Apple blocks a vulnerable plugin, that affects users of Snow Leopard (Mac OS X 10.6) and up. However, the blockage is easy to get around... Just install an updated version of Java. I've got to warn you, though, that Java has been a repeated security issue, with no less than 7 different malware families in a one year period using Java to install as "drive-by downloads" on the Mac. And you cannot predict what sites will infect you... Some hi-profile sites have been hacked recently, including NBC just recently. Using Java to play games online has become extremely risky, rather like playing Russian Roulette. I wouldn't advise doing that, and would encourage you to disable Java in your web browser.
Beyond that, what problems are you having? For most people, Mountain Lion is far superior to Lion. -
Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]] -
hello
i live in Sweden and i bought my iphone 3gs from iraq. my iphone cant be to the silent level even if i press the key up or down. also the screen dont respond very well it take between 30 sec till 60 to be respond.can you help me?
thank youPolishAngel756 wrote:
Some friends have told me that their phone can last up to 2 days without charging??
If they are getting 2 days without charging, it's unlikely they use their device very much.
A full day is pretty good....and if I'm careful, I can easily get a full day of usage.
For me, normal is charging the iPhone mid afternoon at work, but I use it a lot.
My typical usage is 35 mins of listening to podcasts, checking email, checking my RSS feed, and checking a few apps while I ride my bike when I first get up. Then listening to several podcasts at work.
I typically stream music while working out during my lunch hour and use the Men's Health Fitness app to track my progress.
By about 2pm I'm ready to charge the device as it's getting low (somewhere between 20% and 50%).
I leave bluetooth, Wi-FI, and location services turned on all the time.
Personally, I just do not see the point in going into settings to turn on the feature when I need it... just too much hassle. All of my listening to podcasts and music is via Bluetooth.
I know I'm not the heaviest user, but I just do not see how anyone can realistically make it two days on a single charge, it makes me think they simply do not use the features of the device and would be just as well served with a basic or feature phone. -
anyone have a solution to problems with sound alerts or lack of them and side volume keys not working?????????????
sunshinesunshine wrote:
So basically if a iphone has a fault after the 1 year warranty period is over, there is nothing the consumer can do but purchase a new phone??
Pretty much. Except that Apple will replace it for a fixed fee that is far less than the cost of a new phone. In the US the replacement cost for an iPhone 4 is $149. It is comparable in the UK. Unless you can prove that the fault was present at the time of purchase. A switch wearing out would probably be considered normal wear and tear, not a "fault". -
I set up a reverse proxy server but the DOJO and auto complete dont work
I set up a reverse proxy server but the DOJO and auto completer don't work . Am I missing a configuration on the proxy server ?
Well it would help if you can provide some more details on your configuration/setup.
-
HT201401 I have a problem in the on/off button it dont work all times
When i press on the on/off button most of the tmes it didnt work ,so i should try many times to work ,plz help
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
2. If that doesn't solve the issue, backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
JW -
Some of the functions in eircom webmail dont work
most functions within eircom webmail wont work
Hi,
There are many properties belongs to Calculated kefigures and Formula in BEx.
http://help.sap.com/saphelp_nw04s/helpdata/en/13/e072abaddb574284d22361f0b824bf/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
Hope these will help.
Rgs,
I.R.K -
HT1386 home button dont work and it say ipod is disable and connect to itunes?
I have a ipod and the home and power button dont work so there is button on the screen that is the home button. Now all it says is IPod is disabled connect to itunes? any help
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
There are a number of tabs at top of my inbox such as sign out, search email, help, etc. They do not work. For example cannot insert a name for search email- will not give me the curser to do this. When I use internet explorer these tabs do work so not a problem with Yahoo mail- must be problem with Firefox. Recently updated Firefox.
SafeBrowser posted Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
I disabled the Babylon extension and Yahoo Mail works now.
Thank you SafeBrowser -
The buttons dont work on my ipod!!
i have a fourth generation ipod and in the last 2 months the buttons and center button dont work.However i can only change the song by shaking the ipod and when i tilt it the cover flow appears as normal but still i cant work the ipod buttons. i have tried updating and restoring the ipod but this has not worked. any suggestions to what i should try?
Have you tried a hard reset?
-
Is it possible to disable the OAWebBeanConstants.IGNORE_MESSAGES
greetings all .... is it possible to disable the OAWebBeanConstants.IGNORE_MESSAGES . i have this ....................
{ OAMessageTextInputBean bi = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("BI") ;
System.out.println("BI"+bi.getValue(pageContext));
if ((bi.getValue(pageContext)) != null)
{ pageContext.setForwardURLToCurrentPage(//"OA.jsp?page=/oracle/apps/ap/MainPG",
null,
false, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
System.out.println( "PM");
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
String paramPR = prnum2;
Serializable paramPRParamList[] = { paramPR};
am.invokeMethod("paidManuallyUpdate", paramPRParamList);
System.out.println( " THE VALUE OF THE Cancel RB IS " + canx.getValue(pageContext));
prnum1.setValue(pageContext, "");
pReason1.setValue(pageContext , "");
//either one of these confirmations will work . i use one or the other
throw new OAException("Payment Has Been Updated To Paid Manually", OAException.CONFIRMATION);
//or
OAException msg = new OAException("Updated To Paid Manually", OAException.CONFIRMATION);
pageContext.putDialogMessage(msg);
the problem is if i include the setForwardURL my confirm messages dont work. if i dont include the setForward they work.
is there a way to do the setForwars so i can redirect the page and make the table inactive and also use the confimations. i can see its going past my system.prints. it just isnt popping up my confirmations as i believe its due to the IGNORE_MESSAGES.
any insight ....
cheers.Hi,
SetForward*()...It lets the current page processing complete. Your following code will complete its processing, after that it will be forwarded to next page.
ForwardImmediately.... Forwards immediately without letting remaining code process.
However, a good thing is pageContext of the same page is forwarded. That means, if you did pageContext.putDialog(message), in current page, that will be forwarded in both the cases to next page. Hence, for your problem...
use putDialog method, as stated in previous post and
use forward url as CONFIRMATION, NOT AS ERROR OR IGNORE_MESSAGE.
pageContext.setForwardURLToCurrentPage(//"OA.jsp?page=/oracle/apps/ap/MainPG",
null,
false, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAException.CONFIRMATION); //WHAT YOU HAVE PUT IN DIALOGS AND WANT TO SHOW IS CONFIRMATION.
Please try this.
Abdul Wahid -
Hi, I bougth one laptop Hp Envy 17 3D 2090nr, and I update hardware, first had one Intel Core i7 2630qm, and 8 gb Ram to 1333Mhz, two hard drives of 750gb, and I change to one processor Intel Core I7 2720qm, Memory HyperX kingstone to 1600Mhz, and SSD HyperX kingstone 120Gb, but I check in the Aida64 Extremum and the processor say ( CPU Mobile QuadCore , 3000 MHz (30 x 100) Sandy Bridge) but all system dont work to 1600Mhz, the chipset is HM67, Why dont work to 1600mhz? is possible that problem is in the Bios?
I put the last Bios release ( Bios F.1A)Turboboost is a feature which you cannot enable or disable it. Its activated when OS requests for it. Download the Intel® Turbo Boost Technology Monitor from here and see how this features gets automatically active on the Notebook.
There is a support document available at below link explaining what and how Turboboost feature works
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02486485&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Also, make sure the drivers for Turboboost have been installed from here for your Notebook.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
Dont work dimms 2- on K8N Diamond
Hi, i have problem with DIMM 2-4, if i put any memrory ram in the DIMMs 2 or 4, the BIOS give this error (using the led):
Quote
Testing onboard memory size. The D-LED will hang if the memory module is damaged or not insalled properly
But if i put ram in the DIMMs 1-3, work without any problem, also work if i put memory in the dimms 1-2-3-4, but only recognize the ram who is in the dimms 1-3.
I try to reset de bios and upgrade it to the last version, but dont work. Please anyone help me
pd:sry for my english :(Quote from: finord on 13-February-07, 02:14:15
I try to install 2x256mb(at the moment i have 2x512 kingston value ram, in the dimm 1 and 3), i use a signle mode, but the problem is the dimms 2-4, if i put only 1 memory ran (kinsgton value ram) in the dimm 2 o 4, dont work
that is normal, when using 2 memory sticks always put them into 1st DIMM slots(close to CPU socket.) about 4 sticks usage and 2 of them are not detected, can be due your mixing memory (ranks & banks, and CPU mem.controller cannot handle it) what CPU core you got btw? im still not conviced its DIMM slots failure. also before installing all 4 memory sticks setup from BIOS command rate to 2T, and apply memory index 166. also you have insterting all 4 stick in wrong direction. put in DIMM1 & DIMM2 Kingston sticks(instead DIMM1 & DIMM3) and 2 other once 2x256 into DIMM3 & DIMM4 (instead DIMM2 & DIMM4)
re-test.
Maybe you are looking for
-
Need help in passing data from one page to other page in oaf
Dear All, I have a requirement as below. I am doing some selection in one page and populating the data in another page table region, next time when i am selecting another row and pressing the button i need to display the previous row as well as new r
-
Adobe Media Encoder CC renders do not reflect changes to Dynamically Linked After Effects Comps
When rendering a Premiere timeline with a dynamically linked After Effects composition, Adobe Media Encoder will sometimes use an older version of the linked composition (even after I have saved changes in the After Effects comp). For example, if I c
-
Sender JMS Adapter with EOIO Quality of Service
Hi, I have a sender JMS adapter with a quality of service as EOIO. In the SAP help it says that I need to specify the "Processing J2EE Cluster Server (Cluster ID)". Just wondering how I get this value? Does anyone have an example? Thanks, Krishneel
-
Issues transfering photos from lightroom 4 to PS CS5 with edits
I recently upgraded from lightroom 3 to lightroom 4 for mac, and when I open up raw images that I have edited in lightroom as smart objects in photoshop CS5 (which I also just bought) to apply some finishing touches to my photos, none of the edits I
-
How do I listen to music or radio while reading mail, etc?
How do I listen to music or radio while reading mail,etc.?