Disabling Warning: Event id 2887 ActiveDirectory_DomainService

Hello togehter,
is it possible to disable this bloody warning?:
Event ID: 2887
Event Source: ActiveDirectory_DomainService
Event Type: Warning
Event Description:
During the previous 24 hour period some clients attempted to perform LDAP binds that were either:
(1) A SASL (Negotiate Kerberos NTLM or Digest) LDAP bind that did not request signing (integrity validation) or
(2) A LDAP simple bind that was performed on a cleartext (non-SSL/TLS-encrypted) connection
This directory server is not currently configured to reject such binds. The security of this directory server can be significantly enhanced by configuring the server to reject such binds. For more details and information on how to make
this configuration change to the server please see http://go.microsoft.com/fwlink/LinkID=87923.
Summary information on the number of these binds received within the past 24 hours is below.
You can enable additional logging to log an event each time a client makes such a bind including information on which client made the bind. To do so please raise the setting for the "LDAP Interface Events" event logging category to level 2 or higher.
Thanks for your helps
OWA

Hi,
To fix the error and enhance the security of your network, please consider configuring the domain controller to reject unsigned LDAP communications. Meanwhile, client
computers that currently rely on unsigned binds or LDAP simple binds over a non-Secure Sockets Layer / Transport Layer Security (SSL/TLS) connection will stop working if this you make this configuration change. You should first identify all the client computers
that are using unsigned binds.
When unsigned binds occur, the domain controller will log Event ID 2887 every 24 hours, indicating how many unsigned binds have occurred. If you want to learn specifically
which client computers are using unsigned binds to the domain controller, you can enable diagnostic logging for LDAP Interface Events.
For more information, please refer to the following link:
Event ID 2887 — LDAP signing
http://technet.microsoft.com/en-us/library/dd941856(WS.10).aspx
In the meantime, you can ignore this warning if you do not want to force all the clients using LDAP signing.
Thanks.
Nina
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Can DISABLE preProcess Event Handler add to the Orchestration parameters?

I have a DISABLE pre-process event handler defined on the User object. I need to set the current date on a USR UDF attribute whenever the user is disabled or enabled or created. The CREATE handler works and the date value shows up on the user profile. However, when I try to set this attribute on the pre-process DISABLE or ENABLE event handlers, the new date does not show up. Here is the code I am using in my DISABLE/ENABLE event handler:
Date currentTime = new Date(System.currentTimeMillis());
orchestration.addParameter(USER_STATUS_DATETIME_ATTR_NAME, currentTime);
Where the orchestration object is from the execute() parameter list.
Any ideas as to why this is not working? Is adding to the orchestration not allowed for DISABLE or ENABLE event handlers? I know my handler is getting calls as I am logging the orchestration.getOperation() value.
Thanks for any suggestions.
-Dave
Edited by: user552098 on Nov 12, 2012 1:56 PM

When you update the field, make sure you are using the field label name, and not the UDF value.
-Kevin

How can I disable the "Events" how can I disable "Faces"

buona sera
how can I disable the "Events"
how can I disable "Faces"
grazie

You can not
Events are one of many views or your photos in your library - as are faces
YOu can simply ignore both but you can disable them
LN

Using warning events in combination with temporal reasoning

OPA settings and environment settings
OPA version
10.3.0.77
OPA Project properties
Rule language: Dutch
Region: Netherlands (Dutch)
We are using temporal reasoning to make decisions. Example: 'Decision X' is initially 'uncertain', from 01-01-2012 'true' and from 31-12-2012 'uncertain'.
Now we want to use an warning event in case Decision X is uncertain between a certain relevant period, for example between 01-01-2012 and 31-03-2012.
something like
warning("decision could not be made") if
decision is uncertain between 01-01-2012 and 31-03-2012
Is this possible?
In case it isn't possible, is there another solution for this problem?
Thanks in advance.

For the purpose of this explanation, 'Decision X' is 'the person is happy'. Here's an idea to try...
Create a regular rule which checks whether 'the person is happy' is uncertain at any point in the specified interval:
the warning message should be triggered if
IntervalSometimes(2012-01-01, 2012-03-31, it is uncertain whether or not the person is happy)
Then create a Warning event rule, e.g.
Warning("Decision could not be made.") if
the warning message should be triggered
You could combine these two rules into one rule, but it will be easier to test if you add an intermediate attribute, e.g. something like 'the warning message should be triggered' I used above.
For more information about the IntervalSometimes function, search on "IntervalSometimes" in the OPM Help.
Cheers,
Jasmine

Disablying keyboard events in a JFrame.

Hello,
How is it possible to disable keyboard events for a specific JFrame and then (after a while) enable events again ?
thank you,
Rami

Look at this program, events are send but you can't see the data in the fields.
import java.awt.*;
import java.awt.event.*;
public class Nok extends Frame
public Nok()
     super();
     setBounds(6,6,400,300);
     addWindowListener(new WindowAdapter()
    {     public void windowClosing(WindowEvent ev)
               dispose();
               System.exit(0);
     setLayout(new GridLayout(4,0));
     add(new TextField("this is a text field"));
     add(new TextArea("this is a text area"));
     add(new Button("this is a button"));
     setVisible(true);
     Toolkit.getDefaultToolkit().addAWTEventListener(new AWTEventListener()
     {     public void eventDispatched(AWTEvent e)
               System.out.println(""+e);
               ((KeyEvent)e).consume();
     }   ,AWTEvent.KEY_EVENT_MASK);
public static void main (String[] args)
     new Nok();
Noah
import java.awt.*;
import java.awt.event.*;
public class Nok extends Frame
public Nok()
     super();
     setBounds(6,6,400,300);
     addWindowListener(new WindowAdapter()
{     public void windowClosing(WindowEvent ev)
               dispose();
               System.exit(0);
     setLayout(new GridLayout(4,0));
     add(new TextField("this is a text field"));
     add(new TextArea("this is a text area"));
     add(new Button("this is a button"));
     setVisible(true);
     Toolkit.getDefaultToolkit().addAWTEventListener(new AWTEventListener()
     {     public void eventDispatched(AWTEvent e)
               System.out.println(""+e);
               ((KeyEvent)e).consume();
     } ,AWTEvent.KEY_EVENT_MASK);
public static void main (String[] args)
     new Nok();

Disabling mouse events

hi,
I am having objects on a JFrame that respond to mouse events. I would like to know how I can disable these events. I use the addMouseListener to register a mouse event on something. Is there a way to remove or to deregister mouse events.
I basically have a game of tiles on a JFrame and I am going to have the human player play against the computer. I want to be able to have turns; computer and human player turn.

removeMouseListener()

Wininit warning event id 11 wininit nvidia

I get this warning at power up wininit warning event id 11 wininit. event viewer shows it is related to nvidx.dll. I have gone to the registry and changed the key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows
loadppininit_dlls" to 0 but when I reboot it gets changed back to 1. any advice?

Ragonarf
There is precious little information on nvidx.dll. That may indicate malware. I would run malwarebytes just to eliminate the possibility
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag

Disable trace event

Hi,
I have enable a trace and now i want to disable this event trace. How can i do this??
The command that i use to enable is the following:
alter system set events '1349 trace name context forever, level 7'
Tks,
Paulo.

Oops!!!
I done worng
alter system set events '1349 trace name context off, level 7';
Tks,
Paulo.

Warning Event ID 6006 & 6005 and Information Event ID 6000 & 6003

Warning Event ID 6006 & 6005 and Information Event ID 6000 & 6003
Hi,
Would greatly appreciate if someone can advise me on the following warning & info event id I keep getting:
I am running two AD (Std 2012) on two hyperv servers. Noticed the events but I a able to join domain and login to AD on other member servers. What could be the cause?
Event ID 6006
The winlogon subscriber <GP Client> took 67 seconds to handle the notification event (CreateSession).
Event ID 6005
The winlogon notification subscriber <GP Client. is taking long time to handle the notification event (CreateSession).
Event ID 6000
The winlogon notification subscriber <AUINstallerAgent> was unavailable to handle a notification event.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Event ID 6003
The winlogon notification subscriber <AUInstallAgent> was unavailable to handle a critical notification event.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a critical notification event.

Hi Shannlms,
Would you please let us know current situation of this issue?
Regarding to those events, please refer to following threads and check if can help you.
Event ID 6000 — Windows Logon Availability
Event ID 6003 — Windows Logon Availability
Event ID: 6005
Source: Winlogon
Event
ID: 6006 Source: Microsoft-Windows-Winlogon
In addition, would you please let me confirm whether there are some logon scripts applied to the server? Please
check again. Thanks for your understanding.
On Windows Server 2012 Standard, please run
sfc /scannow command to scan all protected system files. Meanwhile, please start the server in safe mode and check if this issue still persists.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

I need to disable key events - J2ME

Is there anyway, in J2ME, to disable key events while processing a current key? I want to avoid queing up of key events and then re-enable key events when I am done handling the current key.
public void keyPressed(int keyCode) {
switch (keyCode) {
case -50:
// I want to disable key events here
// process this key
// re-enable key events
break;
default:
break;

I had tried using a boolean to skip avoid the key as you suggested. That does not work. It seems as if the keys are only being processed in a serial manner. By that I mean the keyPressed method is not receiving the second and third keys while I am processing the first. So when I am done processing the first key I set isOkayToProcess=true and then the second key comes in.

DISABLE MOUSE EVENT on jlabel

Dear all,
I have a jlabel on which i perform a click and the embbeded image switch between start and stop image.
My problem consists in preventing from performing multiples click/or disabling mouse event while the application starts loading some parameters.
switchViewLabel.addMouseListener(new MouseAdapter() {
               public void mouseClicked(MouseEvent e) {
                    //it takes a long time
                               onSwitchViewButtonClick();
protected void onSwitchViewButtonClick() {
          System.out.println("onSwitchViewButtonClick");
          if (canGo) {
               System.out.println("canGo");
               canGo = false;
               MainWindowPeer.getInstance().setCursorToWait();
                     //this action load parameter
                        CommandWindow.getInstance().switchView();
                     refreshSwitchViewButton();
               MainWindowPeer.getInstance().setCursorToDefault();
               canGo = true;
     } But on my console i have noticed :
canGo
onSwitchViewButtonClick
canGo
onSwitchViewButtonClick
canGo.....
It looks like we store mouse event anywhere and for each event we execute onSwitchViewButtonClick code and consume event.(it seems to not be asynchronous)....
How to do ???
Thanks for any helps..

Dear all,
yes i want to ignore mouse events until the processing is done.But how to perform process in separate thread and what is a semaphore.Is it possible to have much more explanation...
Shall i do following code..
mouseAdapter = new MouseAdapter() {
               public void mouseClicked(MouseEvent e) {
                    SwingUtilities.invokeLater(new Runnable(){
                         public void run() {
                              //switchViewLabel.removeMouseListener(mouseAdapter);
                              onSwitchViewButtonClick();
                              //switchViewLabel.addMouseListener(mouseAdapter);
          };Thanks you in advance...

Disable Specific Event in Datagrid

Hi everybody,
I'm searching a way to disable native event (CTRL+B keyPress
in a datagrid) but I couldn't find anything in the actionscript
reference.
Is there somebody who manage to do something like this on a
component???
Thanks

Hi Moorthi,
Found Alex Harui’s excellent entry on 'Disabling List Selection' - http://blogs.adobe.com/aharui/2007/06/disabling_list_selection.html.
Same concept could be applied for datagrid selection.
Thanks and Regards,
Pooja Kuber | [email protected] |http://www.infocepts.com

How can I disable the event sound played when a new window is opened?

When Firefox starts, or when a new window is opened there is an annoying click.
How can I disable this?
The only way I have been able to stop it is by disabling all event sounds from the control panel but I'd rather just disable this particular sound.

No, it's Windows XP. Hmmm, I don't know! I only started noticing it recently and as far as I remember, the only new add on is NoScript. I found the event that was being triggered (Start Connection) and disabled the sound in Windows. So the problem is solved in that I don't have the annoying sound ... but don't know why it started and hope nothing sinister is going on.

How do I disable an event handler?

The file below contains a canvas and a button on the canvas. There are two event handlers, one for the button and one for the canvas. How to I disable the event handler for the canvas when the button is clicked?
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="init()">
    <mx:Script>
        <![CDATA[
            public function init():void{
                canvas.addEventListener(MouseEvent.CLICK, handleClick)
                button.addEventListener(MouseEvent.CLICK, handleButtonClick)
            public function handleClick(e:Event):void{
                trace("Application clicked")
            public function handleButtonClick(e:Event):void{
                trace("Button clicked")
        ]]>
    </mx:Script>
    <mx:Canvas id="canvas" x="108" y="82" width="200" height="200" backgroundColor="0xff0000">
        <mx:Button id="button" x="10" y="168" label="Button" mouseChildren="false"/>
    </mx:Canvas>
</mx:Application>

u can do this when user clicks on any of the canvas or button, just check it currentTarget and then work with ur functions accordingly

Transfer Attempt Warning Event ID 1155

Does anyone have any idea why I keep getting warnings such as the one below? I have checked all of the restriction tables but everything looks good. Any ideas?
Event Type: Warning
Event Source: CiscoUnity_ConvSub
Event Category: (14)
Event ID: 1155
Date: 2/25/2009
Time: 1:42:31 PM
User: N/A
Computer: UNITY
Description:
Transfer attempt for Call Handler: SA(extension: 2803) failed on port 5. Possible reason could be the dial plan on the phone system does not allow this dial string: 2803. The dial string used was taken from the Call Handler's Contact Rule: 'Standard'.

Does this seem to happen only for calls that are transfered to an ACD group?
If you can narrow it down to a specific call handler or notice that it is happening very frequently for a specific call handler, try adding a comma or two to the dial string to see if this reduces or eliminates the problem.
This is definitely shooting at the hip type troubleshooting, but many integration issues like this are timing related. There is a post-dial delay setting in UTIM but this would affect every call for that telephone integration. So adding a call to a particular call handlers dial string is less intrusive at this point in the game.

Disabling Warning: Event id 2887 ActiveDirectory_DomainService

Similar Messages

Maybe you are looking for