Disappearing build settings?

I have just been messing around with trying to get the equivalent of "NDEBUG" working in xcode. I put NDEBUG on the preprocessor line in the build settings for the release target, and now my preprocessor settings don't even show up under build settings? I must have corrupted some file. How do I get this back?

I would think that if the server is continually powered up, the ILOM settings would remain, regardless of the battery - as I expected the one in my cubicle to do. Perhaps not. I'll check that documentation you listed - thanks.
Update: checking on the most recent system where this happened, on 25 JAN there was a PS0 fault, but on 10 FEB the ILOM was successfully accessed. No power outages in the logs since then and the ILOM was most recently accessed today when the ILOM settings were completely re-inputted because they were missing. The sensor for the battery (I assume) indicates good voltage unless there is some other battery that is not indicated in the sensor settings. So, the ILOM shows no power outages or faults since the last time the ILOM was accessed.
Edited by: mdinaz-2 on Jul 3, 2012 12:19 PM

Similar Messages

  • Xcode 4.2 crash after a few minutes working on Build Settings

    Working with the Build Settings screen the editor area turns gray in a 75% (only one square visible) and the only solution is to restart the mac mini. It seems like running out of video memory.
    Using XCode 4.2
    Mac OS x 10.7
    Lion
    Thanks

    How to reproduce the problem:
    In Build Settings switch between Project and Targets several times.
    Some times resizing the screen the problem is solved. Other the Mac hangs.
    May be it's a refresh problem... Is there any patch?

  • Xcode 3.2.6 best build settings for Mac

    Hi!
    I'm using Xcode 3.2.6 on Mountain Lion 10.8.5 to create Applescript based applications.
    They are tiny utilities that needs more complex UI Applescript can provide.
    I''m wondering what's the best build settings for applications aimed to run on Mac OS X
    - since 10.6
    - non universal binary (no PPC code)
    - 64 and 32 bit
    Thanks for your help.

    Mark,
    Now I'm confident about my buids.
    red_menace,
    Ok. That's what I was affraid about. So if I want to go further, I have to learn AppleScriptObjC.
    But the learning curve…
    I'm not a developper. Just a graphic designer.
    Don't have the time to check out this link, but maybe the solution for a smooth transiton to AppleScriptObjC is there:
    http://www.macosxautomation.com/applescript/apps/runner_vanilla.html
    Thanks both of you.

  • Location service disappear from settings

    Location service option disappeared from settings in my iphone 4s after updated to OS6.

    Hi QQF,
    It is now under Settings>Privacy.....not sure why, but there it is!
    Cheers,
    GB

  • PhoneGap Build Settings for Android SDK

    On Mac 10.6.8, Dreamweaver CS6
    I want to test the PhoneGap Build Service with the default  "Hey, it's PhoneGap" index.html page. Specifically, I want to run the resulting apk inside an Android emulator. In preparation for this, I have:
    1) Downloaded the Android SDK
    2) Run...
    android-sdk-macosx/tools/android sdk
         ... from a Terminal window
         This launches the Android SDK Manager, which I have used to download
    Android 2.2 (API 8 - Froyo) and all its associated files
    Android SDK Tools
    Android SDK Platform-tools
    Android Support Library
    (I have also installed Eclipse, but I think that that is irrelevant for the current task)
    4) Run...
    android-sdk-macosx/tools/android avd
         ... from a Terminal window
    This opens the Android Virtual Device Manager, which I have used to create a Virtual Device:
    Name Froyo
    Target Android 2.2 (API level 8)
    Skin WVGA800
    Located at /Users/<username>/.android/avd/Froyo.avd
    This Dreamweaver Help page says:
    Once you've installed the Android SDK, you'll need to start the Android SDK and AVD Managers, and select the Android tools you want to work with locally on your computer. Dreamweaver uses the information you select during this initial setup to populate the Android emulator settings in the PhoneGap Build Service panel. For more information on specifying these settings, see the Android documentation.
    (My emphasis)
    I'm guessing that I've done the parts of these instructions in italics, but I get lost when I reach the part in bold. The window that opens when I select Site > PhoneGap Build Service > PhoneGap Build Settings asks me to "provide the root paths to the [Android] sdk". None of the paths that I have provide seem to satisfy the Emulate Application button in the Build Panel.
    Question: What folder should I select as the root path to the SDK?
    Thanks in advance,
    James

    Lexogram wrote:
    All that's missing is to understand how to convince Dreamweaver CS6 to perform the same steps, rather than going through a Terminal application.
    I haven't installed the Android SDK on my Mac. Dealing with Xcode was painful enough for me.
    However, I do have the Android SDK installed on Windows. I installed it at the top level of my C drive in C:\dw-android. All that was necessary to register it in the PhoneGap Build Settings panel was to enter C:\dw-android in the SDK location field. As long as you have the correct path to the SDK, it should be the same on a Mac.
    I used the PhoneGap Build Service panel to build the app, and then clicked the Download icon. Once it had downloaded, I selected the AVD and target version of Android, as shown in the following screen shot:
    After clicking Launch, it started the emulator and displayed the app. I found it necessary to make sure the AVD and target both used the same version of Android. Otherwise, it just launched the emulator, but the app didn't load.

  • Build settings "remove panel" option gray in application builder

    I am trying to create a stand alone application from my VI using application builder. My problem is I do not want a GUI front panel for it. In the application builder I go to "build settings" but the option to set "remove panel" to yes is gray and unselectable. Is there a setting somewhere that I need to change so I can select this? I can see that some of the VIs in my main VI have this as selectable. Any help would be appreciated.
    Steve

    Thank you, that took care of it.
    Steve

  • Windows Preview Build Settings Missing/Unavailable from Build 10049

    The Preview Build settings has been missing from 10049. I have tried doing Windows Update registry change to enable that option in the Windows Update through settings and also through the control panel but still no success. Please tell me how can i look
    upto that?

    The Windows Registry version trick doesnt work in build 10049 and after runnning the registry script also there is no windows update option available. You cant just manually select updates to install. Its really a tough job updating your computer. 
    Moreover, the concept of fast rings and slow rings when a product is under development is useless as the latest updates should be processed simultaneously for everyone and the users should be allowed to download the ISO of the latest builds released on fast
    rings via windows update. The windows update mechanisms should be changed.

  • Disappearing user settings

    Last year I set up a mini for my wife and added it to a small network connected to my iMac. To speed things I went through the mini installation as if I were the only user and she has been operating the mini ever since. Last week I was helping her organize Quicken files and as an afterthough changed the name on the house icon from mine to hers. Big mistake. Suddenly, her internet connection was gone, her mail files disappeared, her bookmarks disappeared, her desktop items vanished. I had to reestablish her internet connection. I found the bookmarks in a file named "Metadata" but there were many more than her custom list. Her emails are available from the internet provider, all 2,000 plus dating back to 2005! I am still not clear why all this happened. Obviously, her mini thinks she is a new user and is starting everying from scratch. We have reconstructed the Bookmarks in Safari but have not had the energy to deal with the mail. Then there is the now empty Address Book, and probably more missing items.
    My question is whether all her old settings still exist somewhere in the System and whether they can be resurrected? I would also like to know what happened. I have been using Macs for some years but am no technician. I know OS X is designed as a multi-user system, but our machines are all in-house and used only by my wife and myself, thus we've had no need to wall off usage of various kinds. When I want an application not in the dock, I go to the Applications icon, not the Application folder under my User icon, for that folder contains only a partial set of applications. I have never understood why this difference exists but simply ignored it to get on with the work. After the mini fiasco, I am aware I should understand better the underpinnings of OS X. But the 2-3 OS X manuals that I have do not really explain any of this. Where should I look? Thanks for any comment and all comments will be appreciated, harsh though some may be.

    Search these forums for shortname or *changed home folder name*.
    There's a wealth of information in the Help files and these:
    Basic Tutorials on using a Mac, and
    MacTips Learning Centre.
    Quick Assist.

  • Integration builder settings

    Hi All,
    Our XI system is runnig in system PXD and the integration engine and adaper engine is configured in the same system. SLD is configured in a different system viz PBD system.
    The problem is when we are executing sxmb_ifr transaction
    the integration builder is getting opened from PBD system. I already checked the exchange profile parameters and couldn't able to find anything other than SLD parameters pointing to PBD.
    Please give some suggestions to change it back to PXD system when executing sxmb_ifr ?
    also please mention where can we make settings specific to integration builder
    Thanks
    Aby

    hi aby
    Check the exchange profile parameters in url
    http://<webas>:5<sysnr>00/exchangeProfile
    maintain  the entries under "Connections"
    com.sap.aii.connect.repository.name
    com.sap.aii.connect.repository.httpport
    Make sure your J2EE server is running. You can find out by going to the URL http://hostname:50000.
    Also complete all your post installation activities
    reward points if helpfull.
    regards
    kummari

  • Disappearing EDGE Settings

    OK, this is weird. I have an 8GB, bought in the UK with an 02 plan set up to roam. When I went abroad, I turn the phone off on the pane, then when I turn it back on, the EDGE settings have disappeared. I contacted 02 and got the detail which I loaded in and it worked: then when I flew back to the UK, once again when I turned the phone on, the EDGE settings were gone.
    I can't see a lock in the phone to be able to change this permanently. Any idea?

    I would think that if the server is continually powered up, the ILOM settings would remain, regardless of the battery - as I expected the one in my cubicle to do. Perhaps not. I'll check that documentation you listed - thanks.
    Update: checking on the most recent system where this happened, on 25 JAN there was a PS0 fault, but on 10 FEB the ILOM was successfully accessed. No power outages in the logs since then and the ILOM was most recently accessed today when the ILOM settings were completely re-inputted because they were missing. The sensor for the battery (I assume) indicates good voltage unless there is some other battery that is not indicated in the sensor settings. So, the ILOM shows no power outages or faults since the last time the ILOM was accessed.
    Edited by: mdinaz-2 on Jul 3, 2012 12:19 PM

  • Disappearing ILOM settings

    We have a number of T5120 SPARC servers where the ILOM works fine for months, years - and then suddenly all the ILOM settings just get wiped out and disappear. We are not aware of any power outages that may be affecting the servers. I had one in my cubicle that I was still setting up, and overnight the ILOM settings disappeared while it was running over night. Does any one have any information on this annoying problem?

    I would think that if the server is continually powered up, the ILOM settings would remain, regardless of the battery - as I expected the one in my cubicle to do. Perhaps not. I'll check that documentation you listed - thanks.
    Update: checking on the most recent system where this happened, on 25 JAN there was a PS0 fault, but on 10 FEB the ILOM was successfully accessed. No power outages in the logs since then and the ILOM was most recently accessed today when the ILOM settings were completely re-inputted because they were missing. The sensor for the battery (I assume) indicates good voltage unless there is some other battery that is not indicated in the sensor settings. So, the ILOM shows no power outages or faults since the last time the ILOM was accessed.
    Edited by: mdinaz-2 on Jul 3, 2012 12:19 PM

  • Touch id disappeared from settings menu

    afetr upgrading software touch id stopped working properly and O2 suggested a hard reset, which I carried out.  Subsequent to that the functionality has disappeared from the phone.  There is no touch id section under general in the settings menu, so no way to re-scan fingerprints.

    I had the exact same problem.  Touch ID completely disappeared.  Just got back from Apple store.  Not a fixable problem.  They gave me a new phone.

  • Application Builder Settings Sometimes Changes

    I'm currently using LV 8.5 and Win-XP.  Occasionally I need to rebuild an application after making changes in the program.  Usually (not always) I have to redefine the icon and the Source File Settings for the application that had been previously defined.  This also means that I have to redefine the Source Files in the installer.  All other settings remain as previously defined. 
    Why is this happening?  I don't recall having to do this in versions prior to 8.5.  In other words, prior to 8.5 I did not have to update or change any of the settings except the version number.
    Is there something I need to understand or is there something I'm doing wrong?  This is more of a nuisance than a problem, but I'd like to understand the process better.
    Thanks,
    Dave J.

    When you say "recovered" I assume you refer to the event when I have to end the LabVIEW task due to a crash during programming.  In this case, yes I sometimes have to do the recover process, which is another issue that seems to be on the increase with v.8.5.  For example, I have been getting many "sorry to incovenience you" messages since installing v.8.5.
    While writing this, I got the message from JB.  I will likewise keep an eye on the recover issue.
    I also received the message from Matthew K.  I have only this one computer used for LV development and it of course has app builder.  So this is not an issue for me.
    Thanks,
    DJ

  • Quitting Adobe Flash Professional Creative Cloud (CC) Loses All Project Build Settings

    I am currently working on an Adobe AIR iOS project, targeting the 3.7 SDK in Flash Professional CC running on Mac OS X 10.8.4.  If I quit out of the Flash application, reopen it, and then reopen my AIR iOS project, all build and publish settings are lost.  This includes the "output file" path location, the publish settings "target", all "source" paths provided under the "Source path" tab under "ActionScript Settings", all "library" paths provided under the "Library path" tab under "ActionScript Settings".  I have to go in and reset these everytime by hand after relaunching the Flash CC application.
    Anyone else experiencing this problem?
    Thanks in advance.

    Dharmendra,
    while you're about to fix this publishing problem, you might also want to look into the problem, that the 'Output file:' in the publish settings doesn't update its value when one changes the current active Profile.
    Test case:
    - create 2 profiles, e.g. WebDebug, DesktopDebug
    - have [WebDebug] publish the .SWF to [WebOutput] and...
    - ... [DesktopDebug] publish the .SWF to [DesktopOutput]
    When switching between the 2 profiles, the 'Output file:' text box does NOT change its content.
    "Workaround":
    - select the targeted profile
    - close the dialog via [OK]
    - reopen the dialog
    --> The 'Output file' text box now has changed its content accordingly.
    As it seems to be of no interest at the moment, when bug reports are being created - like in here "http://forums.adobe.com/community/report_a_problem" - or the 'Adobe bug reporting page' doesn't work at all (http://bugs.adobe.com/flex/), I'm just posting it here...
    Thanks

  • Icloud drive toggle has disappeared from settings

    Now that I installed Yosemite I went to upgrade my icloud drive on my phone but the option is gone. Icloud does not work on any of the apps.
    I restored from backup and still the same

    Have approximately the same situation myself. Icloud drive disappeared completely from the icloud settings on my iPhone with ios 8.1.3 (after I have upgraded my iPad to ios 8.2 but maybe it's a coincidence)
    Upgrading iphone to ios 8.2 did not resolve the problem.
    The only thing that helped was reset to factory settings and initialize iphone as new device.
    Restoring from backup introduced the problem again, so you are effectively stuck with a broken backup, forced to reinstall everything and configure all from scratch.
    Not professional and not what I would have expected from apple.

Maybe you are looking for