Disappearing referenced libraries from NWDS

I have installed NWDS 7.1 SP11 and I referenced SAP system library (Variable SAP_SYSTEM_ADD_LIBS) in my project's build path... whenever I close and re-open the IDE, the referenced libraries are gone from package explorer and I get compilation error.
SAP_SYSTEM_ADD_LIBS remains on Libraries tab of my build path though.. I have to perform the Add Variable step again to reference the libraries... Am I missing something?

Hello
We will move this thread to the [Java Programming |Java Development;forum. Hopefully you will get a better response on that forum.
Regards
XI/PI Moderator

Similar Messages

Component referencing libraries from other component

Hi,
Is it possible to have a component which uses the libraries defined in another component?
I would like to have one component with libraries only and any other component to be able to reference those libraries hence removing the need to put the libraries in each component.
Thanks,
Vlad

Hi Vlad, this is perfectly possible. Make sure your library component has its class-path's set up correct and your other components should be able to reference these classes without any additional effort (as long as your library component is deployed and enabled).
It might be wise to setup a feature in your library component (in component wizard, goto advanced build settings and fill in "Feature Extensions" field with something, ie. MyLibraryComponent). In all your other components you can than put in the required features field the same string; ie. MyLibraryComponent. This should tell anyone who disabled the library component that it is required instead of just generating a bunch of classnotfound exceptions. Setting up this feature thing is not required to make things work.
Regards,
Fabian

Deployment: Deploying external libraries from dependent projects

Hi,
i need some help for the following issue.
How do I deploy external libraries from dependent projects? I have one project for the model layer which references TopLink JPA library and an other project for view/controller based on JSF/ADF Faces. The view/controller project has the model project as dependency.
For the view/controller project i have created a WAR deployment profile. On deployment all classes and referenced libraries from view/controller project and all classes from model project were included. But not the referenced library for TopLink JPA.
My second approach was to create a JAR deployment profile for the model project. Again the referenced library for TopLink JPA was not included.
My third approach was to add a library file group to the JAR deployment profile. I tried to add the library to jar's root and to META-INF directory. But the application don't find the library (java.lang.NoClassDefFoundError).
The only way I got this running was adding all referenced libraries from dependent projects to the view/controller project which couldn't be the proper solution.
So how do I get this running? What are the best practices?
I would be glad to get some input on these issue. Thank you.
PS:
I'm using JDeveloper 10.1.3.2 and like to deploy on Tomcat 5.5.23.

I see your points.
Unless you have Java EE 5 there is no real standard way of including libraries in EAR files. Including the libs in the WAR files is the only standard supported way for file formats prior to Java EE 5. If you have to consider Tomcat as a possible platform, WAR files are your only option.
You reluctance to include the libs in the WEB-INF/libs structure is understandable but think of injected dependencies in the Entities you're not aware of. These might be needed in the view layer too.
--olaf

Adobe Bridge 4 vs Iphoto 09 using referenced libraries

I've always used iphoto with referenced libraries, usually with no problem with an external HD with my imac. The reason: I don't want to consume my HD with hundreds of photos and video files and large photoshop files. Here's what I would like to do. I recently purchased Apple's new time capsule, and would like to do the following, store all these media files on the time capsule, with iphoto's library on my imac's HD and referencing those media files on the time capsule, wirelessly. My question is, would adobe bridge be a better way to view and track these media files rather than using iphoto? Any insight with either programs would be appreciated.
I do like using iphoto for creating web galleries with mobileme, and the occasional phonebook. In those instances, I usually copy over the files to my hd and copy them into iphoto so there are no corruption issues.
Oh, and the other reason to storing these files on the time capsule is so that my husband's pc laptop and my mac laptop (powerpc G5) would have access to these files too.

1. You know that's not a supported use for a Time Capsule, right?And folks who have tried storing items other than Back Ups on there have had permissions issues etc.
2. Running a Referenced Library is fraught with problems +should anything go wrong+. This is particularly the case where the Library and the files are stored on different volumes. If the path changes in any way you will need to resolve each alias individually. There is no need to have all the photos referenced if you want to store them on an external drive. You can easily run a Managed library from an external disk.
3. I'm not sure what, if anythign, Bridge would bring to the set up. It's a file browser and not a Photo Organiser. You might want to post on an Adobe forum for more on Bridge. The one thing I will tell you is that the "file management" capabilities of Bridge make it lethal to photos also managed by iPhoto.
Regards
TD

WPF+MAF - addin referenced libraries are not loaded?

Hi! I'm new to Add-in framework. Now I'm trying to create WPF addin that returns UserControl (according to https://msdn.microsoft.com/en-us/library/bb909849(v=vs.110).aspx).
The problem is that when I try to get user control from addin, Exceptions are thrown:
1. The first exception was "Cannot find resource named '<name>'. Resource names are case sensitive.". All the resources are stored in separate library and it worked fine when I did the same with MEF (before MAF)
2. OK, I've removed all StaticResources and then I got another exception: "{"Could not load file or assembly 'Infralution.Localization.Wpf, PublicKeyToken=547ccae517a004b5' or one of its dependencies."}". This lib is used for localization.
Note: all needed libraries are in the same folder as the addin is
Are addin referenced libraries not loaded? Or where was I mistaken?

Yes, I had downloaded it (before writing my application) and tried to start it, but it does not work. Today I've tried it again and it still does not work.
1. VS says there are no System.Xaml references at all projects (fixed)
2. NullReferenceException is thrown at StackChanged event invokation - added check for null (fixed)
Now, when the solution is built, there are 6 warnings at AddInStore.Rebuild(path). The first says: "While examining an assembly for pipeline segments, got a TypeLoaderException" and there is
no the exception per se. (I could attach image, but it will be useless, because I have VS Express and not english ui language). So, 0 addins are found.
Hi Maleev,
>>1. VS says there are no System.Xaml references at all projects (fixed)
>>2. NullReferenceException is thrown at StackChanged event invokation - added check for null (fixed)
I saw that your original two issues have been resolved, for your new question, could you please close this case and feel free to open a new thread for better communication?
Thank you for your understanding:)
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Moving referenced libraries

I have referenced libraries on an external drive. This drive is now full. I have purchased a new larger drive and would like to transfer my referenced libraries to the new drive. How do I do this without a opening a can of worms?

I have referenced libraries on an external drive.
This drive is now full. I have purchased a new
larger drive and would like to transfer my
referenced libraries to the new drive. How do I do
this without a opening a can of worms?
It should be straightforward. You can get Aperture to move all your files for you by ctrl+clickling on each project and selecting 'Relocate masters for project'.
Alternatively, you could manually copy the master files from your existing disk to the new disk and then use the Referenced File Manager to tell it where they are.
I recommend the first, and also recommend that before you begin, you make a backup either by using the vault, or by copying your entire Aperture library (in the Pictures folder). If you have a backup, you can go about the whole process with no fear.

Syncing 2 referenced libraries ?

Hi guys,
I would appreciate some advice on how to keep 2 independent referenced libraries in sync with each other. My setup is as follows -
1 iMac in my office with my entire photo library referenced from the iMac HD.
1 portable hard disk with its own referenced photo library. The library sits on the portable HD, the referenced photo structure is synchronized with the iMac using Deltawalker or Chronosync.
1 Macbook Pro with a library referencing the masters on the portable HD.
I do most of my work on the iMac, including ingesting and editing. I would also like the flexibility to use my MBP the same way when at home or on the road. Keeping whatever photos I ingest or delete in sync is not a problem, Chronosync does it for me.
I would like to know how to also keep my libraries in sync, but point to the correct referenced images.
For example,
I tweak 100 images on my iMac. I would like to import those changes to my portable library, but have them point to the masters on the portable HD.
Is there any way of doing this efficiently?
Thanks in advance,
Viren
PS - I would like to keep my masters referenced for easy syncability, and to use other raw converters.
Message was edited by: viren.mohan

PS - I am aware of the 'Locate Referenced Masters' and Reconnect All option. It takes too long to do so, unlike Lightroom.

I created two Aperture libraries from one large library. Some of the photos in library

I created two Aperture libraries from one large library. Some of the photos I want to keep in library #2 are in the trash of library #1. If I empty the trash of library #1, will it affect the same photos that were moved to library #2? I moved over 2,000 photos to create library #2. Their names are showing in the trash of library #1.

Are your images referenced or managed? If your partial libraries are referencing the same original files as the library you exported them from, be careful. Deleting the orignal on one library #1can delete it from the library #2. But if your originals are managed by Aperture inside the Aperture library, you can delete them.
I moved over 2,000 photos to create library #2. Their names are showing in the trash of library #1.
If you are not sure about referenced or managed, select one of the images you want to keep in the library where they are not in the Trash, then use the command "File > Show in Finder". If you can reveal them in the Finder, they are referenced and probably are shared between your libraries.
Or turn on "badge referenced files" in the Preferences > Appearance settings. Then your referenced images will show arrow badges.

Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony

Error while deploying a PAR file from NWDS into an ECC.

Hi all,
I am getting this error while deploying a PAR file from NWDS into an ECC.
Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
more detail.
My server is running properly
1 - Where is sap-plugin.log file? I don´t find it.
2 - Could there be another file with another name with information about the error?
3 - Is there another way to deploy the file directly from the ECC?
Regards,

Hi,
Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
Windows/ Prefereces / SAP Enterprise Portal
Check the following enteries
Alias
Host
Port
Login etc.
Regards,

Error while deploying from NWDS

Hi,
i am getting the following error while trying to deploy a PAR file from NWDS through export.
PAR upload failed:C:\Documents and settings\Trials\Trials.par
Please check the userid and password.
i cross checked the userid and password.both are correct. the same par file is deployed successfully in other servers.
this error occurs only for PAR file deployment. other applications like webdynpro and all are deploying successfully.please help.
/* useful inputs will be rewarded*/
Regards,
Art Tech.

Hi All,
Thanks for ur responses.
To Sahu:
     Yes the user id has system admin role.
To Ramani:
     I know that we can upload the PAR from portal itself as u said but i want to know the cause of my problem. why i am not able to do it from NWDS.
To Vinoth:
     As i said i want to upload it from NWDS only.
i want to inform onething to all of u . we thought that it may be problem in SDM. so we checked SDM also. in that a process (deployment) is still going on. so we r not able to enter into it. it is like a infinitive for loop. so, that may be the cause which doesnt allow other deployments.
Can any one tell me how to kill that process. it is something relevent to J2ee engine administration i hope.
What i mentioned above is only our decision , we are not sure that whether it is the exact reason or not. so if anyone encountered the same problem and solved please guide me or any docs related to this also will be helpful.
Regards,
Art Tech.

PAR Upload Error from NWDS

I'm unable to export a PAR file from NWDS to the Portal. I go into the com.sap.ep.connectionManager log and find the error captured there with the URL address that NWDS was attempting to connect to and drop it in a browser. This results in the following error message:
ERROR: Upload failed - exception caught: com.sapportals.portal.prt.runtime.PortalRuntimeException: Invalid content type submitted - no multipart data
Has anyone encountered this and has a solution?
Thanks in advance!

Thanks for the response, Yoav.
There is not a problem with uploading the par file. I can enter Java Development-Tools-PRT Admin Console and use the Archive Uploader to store the par file in the PCD.
This appears to be a problem with NWDS communicating with the portal and the way the file is presented for upload. I am using NWDS SP11 with EP 6 SP11 and PDK 6 SP9.
Thanks again,
Steve

What authorization required to deploy module from NWDS 7.1

Hi Experts,
Need to deploy custom adapter module from NWDS 7.1 to PI server, Please help me to know exact access/authorization role required one developer to publish the module.
I have gone through many blogs and thread but not able to find exact administrator role which help to deploy the custom module on PI server.
Error I am getting in NWDS 7.1, while deploying module:
Could not establish connection to AS Java on [<server detail>]. Authentication did not succeed. Wrong or missing security credentials (password) for principal [PIUSER], or the specified principal has no permissions to perform JNDI related operations.
Regards
Raghav
Edited by: RaghavTiwari on Feb 4, 2012 8:25 AM

Hi Raghav,
Check this [SAP Help link|http://help.sap.com/saphelp_nw73ehp1/helpdata/en/43/1e1bbc5d9206fde10000000a422035/frameset.htm] for User Roles for Adapter and Module Development.
Regards,
Raghu_Vamsee.

Unable to upload the PAR from NWDS

Hi ,
I am unable to upload the par from NWDS as it is throwing the error "Unable to upload"
I have done the proxy settings in NWDS.
can any one tell me is there any other settings i have to do in NWDS.
Thanks
Ajay

Hi Ajay,
Have you copied the NWDS installed stuff from other system and working on that?
Anyway, you can go about this way to upload your par.
Goto System Administration -> Support -> portal runtime -> Administration console -> Browse and add your par -> say upload. Thats it and your par is uploaded:-).
Hope it helps.
Regards
Deepa
Pls reward points for helpfull answers.

Problem while deploying PAR from NWDS

Hi,
I am getting this error while deploying a PAR file from NWDS.
Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
more detail.
regards,
Arun

Hi
You also have the option of uploading the par by logging into the portal ...
System Administration->Support->Portal Runtime->Administration Console
just browse and upload the par file...
Create an IView from par and can see the output
Avinash

Disappearing referenced libraries from NWDS

Similar Messages

Maybe you are looking for