Disc is not being read and is not stuck
MacBook is not reading my disc and now it is stuck inside. How do I get it out?
You may need to reset it. Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 15 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
If it doesn't work the first time, give it a second or third go. Sometimes it takes a few/several tries.
See this thread as an example of what I mean by needing to try it many times...
http://discussions.apple.com/message.jspa?messageID=5065208
If that doesn't work, you may need to restore it, but to do that, you may need to put it into disc mode...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Good luck,
Patrick
p.s. http://www.apple.com/support/ipod/five_rs/
Similar Messages
-
Does any one have a solution to a blank disk not being read and unresponive to the eject button?
does any one have a solution to a blank disk not being read and unresponive to the eject button?
Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive
The Stuck CD/DVD Thread -
Ipod not being read and freezing
When I plug my ipod into my computer, it goes to "do not disconnect" but not the flashing do not disconnect. Its frozen. My computer wont read it. So I unplug it and its frozen. I know how to restart it but that doesnt help me from when it freezes again once I hook it up. How do I stop it from freezing and not being read. Thanks
i am having a similar problem with my 4g 20G
it freezes when i try to update. i thought maybe it was the latest version of itunes i recently installed but i reverted back to an old updater version and itunes 6 and while i was able to get 300 songs on the ipod without freezing, when i tried to put the rest of my library on there it freezes. i've even tried to put as little as 15 songs on at a time and that still freezes the ipod.
i have a mac powerbook with macos 10.2 -
PCR isn't producing values -- it's being read and shows in the log
Hi,
I'm having problems with a PCR,
it is being read (all of the lines show in the payroll log)
Processing
/102 401(k) Wages
Rule ESGPCR VaKey Operation
ZSUP * ADDWT&SUPC
ZSUP * AMT=&SUPY
ZSUP * AMT?I401KS
ZSUP * * AMT+&SUPC
*ZSUP * * ADDWT&SB1*
ZSUP * * AMT?I401KS
ZSUP * * * ZERO=
ZSUP * * * AMT=&SUPY
ZSUP * * * AMT+&SUPC
*ZSUP * * * ADDWT &SBF*
ZSUP * * * FILLF NRA
ZSUP * * * NEXTR A
ZSUP * * * ADDWT *
but a print of the VAR table immediately following this only shows the first variable addwt
PRINT NP VAR
Output
Table VAR
WType Rate Number Amount
SUPY 0.00 0.00 80,571.08 (comes from an earlier PCR)
SUPC 0.00 0.00 199,680.00
Why isn't it calculating the rest of the rule?
Also the second ZSUP * * AMT?I401KS shouldn't follow the * path, it should go to the > path as 199680+80571.08 > 245,000.
I've tried backing out and re running payroll to see if it's confused, to no avail.
I'm confused, help would be greatly appreciated.
Thanks in advance!
StephanieHi,
I'm having problems with a PCR,
it is being read (all of the lines show in the payroll log)
Processing
/102 401(k) Wages
Rule ESGPCR VaKey Operation
ZSUP * ADDWT&SUPC
ZSUP * AMT=&SUPY
ZSUP * AMT?I401KS
ZSUP * * AMT+&SUPC
ZSUP * * ADDWT&SB1
ZSUP * * AMT?I401KS
ZSUP * * * ZERO=
ZSUP * * * AMT=&SUPY
ZSUP * * * AMT+&SUPC
ZSUP * * * ADDWT &SBF
ZSUP * * * FILLF NRA
ZSUP * * * NEXTR A
ZSUP * * * ADDWT *
but a print of the VAR table immediately following this only shows the first variable addwt
PRINT NP VAR
Output
Table VAR
WType Rate Number Amount
SUPY 0.00 0.00 80,571.08 (comes from an earlier PCR)
SUPC 0.00 0.00 199,680.00
Why isn't it calculating the rest of the rule?
Also the second ZSUP * * AMT?I401KS shouldn't follow the * path, it should go to the > path as 199680+80571.08 > 245,000.
I've tried backing out and re running payroll to see if it's confused, to no avail.
I'm confused, help would be greatly appreciated.
Thanks in advance!
Stephanie -
have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.
thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.
-
Doesn't seem to charge, not being read, and have the sad face
pretty much it. I have the 80G. It was freezing today so i tried restarting it but then it didn't respond to the buttons as if it was on hold but the music was still playing but the screen was frozen. So i hooked it up to a ipod boombox so it would kinda charge and reboot itself. Next thing i know, i'm getting the sad face and even though it's now been plugged into the computer for about 3 hours, there is no sufficient charge and when it does come on i still get the sad face.
See these troubleshooting articles.
My iPod is sad.
iPod displays a "sad iPod" icon.
What does this picture on my iPod mean?
Also, there is a pretty comprehensive post written by another forum member which is about the sad iPod icon or the folder and ! icon. Be aware that it's quite involved and contains some info that will almost certainly void the warranty. If your iPod is still within the warranty period, you should use that option first.
The Sad iPod/folder and ! icon.
You can arrange online service here.
Service request. -
Exchange 2013 - Your Message was deleted without being Read
Scenario:
Email gets sent to a shared mailbox with a read receipt called for e.g.
[email protected] and everything goes into [email protected] goes into another shared mailbox called
[email protected] The user who has access to
[email protected] delete the e-mail without being read and the sender receives an email back saying you:
From: JOE Smith on behalf of [email protected]
Your message was deleted without being read on Monday, July 14, 2014 8:36:58 AM
Is there a way just to target [email protected] from not sending anything at all?You could use transport rule to delete if read receipt is coming from mailbox2 or any other recipient with on behalf of...
Blog |
Get Your Exchange Powershell Tip of the Day from here -
Multithreaded problem in read and write thread
This is a producer consumer problem in a multi-threaded environment.
Assume that i have multiple consumer (Multiple read threads) and a
single producer(write thread).
I have a common data structure (say an int variable), being read and written into.
The write to the data sturcture happens occasionally (say at every 2 secs) but read happens contineously.
Since the read operation is contineous and done by multiple threads, making the read method synchronized will add
overhead(i.e read operation by one thread should not block the other read threads). But when ever write happens by
the write thread, that time the read operations should not be allowed.
Any ideas how to achive this ??If all you're doing is reading an int, then just use regular Java synchronization. You'll actually get a performance hit if you're doing simple read operations, as stated in the ReadWriteLock documentation:
Whether or not a read-write lock will improve performance over the use of a mutual exclusion lock depends on the frequency that the data is read compared to being modified, the duration of the read and write operations, and the contention for the data - that is, the number of threads that will try to read or write the data at the same time. For example, a collection that is initially populated with data and thereafter infrequently modified, while being frequently searched (such as a directory of some kind) is an ideal candidate for the use of a read-write lock. However, if updates become frequent then the data spends most of its time being exclusively locked and there is little, if any increase in concurrency. Further, if the read operations are too short the overhead of the read-write lock implementation (which is inherently more complex than a mutual exclusion lock) can dominate the execution cost, particularly as many read-write lock implementations still serialize all threads through a small section of code. Ultimately, only profiling and measurement will establish whether the use of a read-write lock is suitable for your application. -
I am trying to update our Adobe Reader and Acrobat Pro to 11.0.10 using the default MSP packages with SolarWinds Patch Manager. All of the systems keep reporting as 'NOT APPLICABLE'. All of the workstations have Reader11.0.09, with about 10% still on 11.0.08 (due to the fact that the reader 11.0.09 package only patched about 2/3 of the systems). All systems that have Acrobat Pro are 11.0.09.
In SolarWinds I am using the "Adobe Systems, Inc. Packages" node.
Adobe Systems Acrobat 11 Catalog
Adobe Systems Reader 11 Catalog
and the SW Patch Manager downloads the msp's straight from Adobe.
I have checked the msp's manually and they will update at least back to 11.0.07 in Reader, and 11.0.0 in Acrobat Pro. (I had an old stand alone system that still had Reader 11.0.07, and I did a new install of Pro and went straight to update 11.0.10)
The SolarWinds Tech said, "Okay. That content is produced by Adobe. Any questions concerning applicability logic or diagnosing why a package reports as NotApplicable when that's not expected would need to be directed to Adobe, as they are solely responsible for that content and its behavior".
I am new to SolarWinds Patch Manager, and any help or advice would be greatly appreciated.It sounds like you are attempting to use the SCUP catalogs outside of the MS solution. I can almost guarantee you that Adobe didn't test it if it's not referenced in the ETK: 11 SCCM-SCUP — Enterprise Administration Guide
That being said there "should" be logging available in any deployment solution. Since I am not familiar with Solar-Winds particular solution I can't say if it logs errors and how verbose those logs might be. If you have logs then post the output and the forum members "might" be able to assist you. -
I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?
Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
My ipod touch is being read as just a simple camera and will not let me access it, how does one go about fixing this problem? My screen has recently cracked and i need to retrieve my music from it but cant do so when my computer is reading it as a camera and only showing me its pictures.
Here:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Also try another computer. -
My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.
Hello, BAHannebaum.
The article below should resolve any device not being recognized in iTunes issue that you are experiencing. The most common issues are the Apple Mobile Device Support driver or iTunes is outdated. Start with the first step and test the results after each step processed.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. javaI have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please. -
I just updated my iPhone 5 from virgin mobile to ios7, and upon the normal setup i find that i my sim card is not being read; apparently now it isn't supported. please someone help me.
my iphone is and has been locked to one carrier. all i've done is a software update to ios7, like all the other updates since i bought the phone when it was released. same carrier, same sim card. :/
-
I firewired my i-tunes library from my old computer to a used I-mac which I bought. All purchased songs & playlists
were succesfully transferred. When I tried to sync my empty I-pod to the used I-mac I received these messages.
- I-pod cannot be synced
- The disc could not be read from or written to
- You dont have the priveledge to make changes.
This is all my music legally downloaded and purchased from I-tunes. How to I circumvent this barrier?
Thanks, jaimehttp://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359
Maybe you are looking for
-
un Microsystems, Inc. in 1996 launched a new pure object-oriented programming language, called Java. Java technology has become the software industry appears one of the most important technology, this platform has nothing to do with the emergence of
-
How can I copy first page on a form and append to the end of the form
I'd like to have a "copy page" button on page one of my form. When the user clicks that button a new page is appended and a specific set of objects on page one get copied to the new page. Can you help me do that?
-
what cables do I need to watch films I buy on my mac on my TV
-
ABC Analysis (revisited again!!!)
Hello Friends, I saw few posts on how to do ABC analysis, but there were no concrete answers. To summarize the requiement (say based on Good Receipt Quantities): 1. Top 25 -> indicate as 'A' 2. Bottom 25 -> indicate as 'C' 3. Records between 25 to 75
-
I used to create a podcast playlist, download it to an ipod and then listen to it at night. Not any more. Major loss for me.