Disconnect CRM from ERP
Hello All,
I've been searching in all these CRM Foruns for a thread that could explain the way of disconnect CRM from ERP. However, it seems that so far no one needed to do this.
My client no longer wants to work with CRM, and there are some processes that are now being syncronized in both ways like:
- Sales;
- Business Partner creation and updates;
- Price Conditions;
- Material creation and correspondent sales process;
- And lot of other information.
I need to gather some documentation that explain the way of making this oprations. As far as I'm concerned, I will need to cancel all syncronization operations (through R3AC1, R3AM1), empty all queues (SMW01, SQM1, SQM2), but I should have some SAP documentation or some experienced collegue that could help me or guide me to preform this operation.
Is there anyone that could give me some advices?
Thanks in advance,
Kind Regards,
Miguel
Hi ,
If you want to discinnect ERP from CRM, data flow has to be stopped both ways, i.e upload of data from CRM to CRP and Download of data from CRM to ERP.
Steps for deactivating from CRM to ERP.
1. Delete all sites of type R/3 in transaction smoeac (Admin Console).
2. Deelete RFC destainations pointing to ERP in sm59.
Steps for deactivating from ERP to CRM.
1. Remove entries for consumer CRM from the CRMCONSUM table in ERP.
2. Remove entries for consumer CRM from CRMRFCPAR in ERP.
If you have no external systems connected, (standalone CRM), you can stop the creation of MBdocs by creating
relevent entries in transaction smw3_00
Hope this helps.
Best Regards,
Shourav
Similar Messages
-
How to read and display table data entries from ERP in CRM
Hello experts,
I am new to CRM. I need to read data base entries from ERP in CRM system. What would be the best way to do . The table is a standard SAP table with a custom include (several customer fields). Calling a web service would be the best way..? or is there any other way that I can do it too.
Also, to display these entries what would be the best tool? Should I built my own transaction/report to do it?
Any advise or guidance would be a great kick start to learn the CRM development environment.
Regards,
jafferyHi,
Check the below wiki link if it helps.
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Also, you can try an option of transaction launcher.
Hope this helps.
Regards,
Chandrakant -
How to replicate a customer from ERP to a Person in CRM
Hi,
I am doing an implementation of CRM 7.0 and have to integrate it with an existing ERP (ECC6) system. I've set up the replication of the Business Partners to replicate two of the Account Groups in ERP to CRM and it is working well. The only problem is that the customers in the ERP system are Organizations and Persons. When the replication takes place, all are created as Organizations (role sold-to Party).
Is there a way to replicate customer data from ERP and have the BP in CRM created with BP Category 1 (Person) in stead of 2 (Organization)?
The customers in the ERP system are not consumers.
Thanks
JeanineI logged an OSS for this problem and SAP replied with the following:
"What you've explained is a standard behavior of the system.
Since CRM and R/3 have different BP data models, all BPs from R/3 are
transferred to CRM be default as Organizations.
An only exception is BPs, which are assigned into account group, which
is mapped into classification "Consumer: persons".
Customers downloaded to CRM will always be interpreted as Business
Partners of the type organisation.
Customers in R/3 are Organisations and are subsequently replicated to
the CRM system of the BP Type - Organisation, therefore the standard
scenario is that customers downloaded from R/3 are replicated as
Business Partners of type Organisation.
If you don't want to use functionality of Consumers, it's also
possible to change the category with a modification by
appending the R/3 outbound processing or the CRM Inbound processing
this would change the organisations to persons, and is possible by
changing the category in the complex structure from 2 to 1 by copying
the organisational data to the personal data, the category change
works only before the creation of Business Partners in CRM, for
existing BPs that have been downloaded, it would be necessary to
delete these BPs using Note 415007 and start the download again after
modifying the User-Exits.
The data sent from R/3 are mapped into a complex structure of type
BUS_EI_MAIN. In CRM table CRMC_BUT_CALL_FU you can add an own
function module for event "CRM INBOUND" and a position less than
100000. Here you can you can change the field
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_CONTROL-CATEGORY from 2 to 1
depending on other data that is available in this structure.
Additionally you have to map the organisation specific data
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_ORGANIZATION into the
person specific data
C_BP_STRUCT-CENTRAL_DATA-COMMON-DATA-BP_PERSON and initialize the
organizational data. Be sure to check the category before doing this,
because the initial download sometimes forces partial processing
in case of errors and tries to reprocess the BPs that don't have errors
So your mapping from organizational data to personal data should be
done only once.
This solution only works if the criteria is available in the structure
BUS_EI_EXTERN. If it is not, you can add an User Exit in R/3 in the
R/3 outbound processing at event DE_BCS2S in the tables TBE24
(definition of product) and TBE34 (definition of your module).
Unfortunately the data are only available as BAPIMTCS structures
and you have to look for a structure
with BAPIMTCS-TABNAME = 'BSC_MAINCE' to change the category.
See module PI_BP_MAIN_TO_BAPIMTCS in order to understand this mapping."
We will do the cutomization and test, but I think this is the only solution.
Regards
Jeanine -
Replication of bp name field from ERP to CRM
Hi experts,
We have a problem in ERP to CRM master data replication.
We have already connected our ERP (ECC 5.0) system to CRM 7.0.
We have made initial master business partners (bp) data load from ERP to CRM without problems.
All bp fields, including NAME (but000-name_org1) are transfered correct from ERP (KNA1-NAME1) to CRM.
We have a z program in ERP that is used by users to change the customers names (KNA1-name1).
When we use our custom program in ERP to change the kna1-name1 field in ERP, the bp name field is not changes in CRM.
Using XD02 or FD02 in ERP to change the name (kna1-name1) field in ERP the replication of this field to CRM is correct.
KNA1 table is updated correctly in ERP using our custom program .
What does transactions XD02 and FD02 has that make name filed replicated in CRM?
Thanks in advanced.Hi,
First variant:
You have to retry load business partners by request:
Tcode R3AR4, R3AR2, R3AR3
So, system retrive new data from tables and transfer to CRM.
Second variant:
You have to add to your z-program part, there you fill data in the CRM system also (via RFC).
Denis. -
Error in segment COMM_PR_SHTEXT when downloading products from ERP to CRM
Hi experts
I get below error when downloading materials from ERP to CRM.
"Data for set COMM_PR_SHTEXT may only be changed in the original system Q10CLNT310" But the material and the short texts has been created in ERP, hence I can't change them in CRM. When I look in table COMM_PRODUCT field LOGSYS has value 'Q01CLNT300' which is our ERP system. So as far as I see it, our original system is Q01CLNT300 and not Q10CLNT310 as it says in the errormessage. The result is that the sales org data we are trying to download to CRM are not downloaded.
Can you help me on this one?
Best regards
Jørgen JensenHello Jørgen ,
Q10CLNT310 --> Is this you old ERP system?
One possibility for this error would be some product related tables contain the wrong LOGSYS value i,e Q10CLNT310.
Also,check LOGSYS for table COMM_PRSHTEXT.
This generally happens when data has been copied by means of client copy , and you do not run txn:BDLS.
In txn:BDLS ,you can change the LOGSYS for a particular table or all relevant tables.
You can execute in in Test mode, to check the affected tables.
Hope this helps!
Best Regards,
Shanthala Kudva. -
Error with replicating materials from ERP to CRM 7.0
Hi experts!
After dump (No PXA storage space available at the moment) materials are not replicated from ERP to CRM.
In transaction R3AC1 there are no filters for object MATERIAL.
Replication is managed by transactions R3AR2-R3AR4 with parameters MARA-MATNR.
In transaction SMW01 the status of incoming for material BDOC is green.
But in the bottom of status bar there are some messages appears when clicking the buttons u201CShow BDOC message classic datau201D and u201CShow BDOC message extended datau201D correspondingly:
u2022 No classic data for BDoc message ХХХХХХХ found.
u2022 No extended data for BDoc message ХХХХХХХ found.
The table COMM_PRODUCT is empty.
Can anyone help me ?
Kostya Khveshchenik.HI Julian,
I have exactly the same issue please would you let me know the solution to fix this issue.
Will really appreciate if you can respond to this asap.
Regards
Shashidhar -
Transfer of Employee responsible from CRM to ERP
Hello,
I've replicated employees from ERP to CRM. I create a new corporate account in CRM. I assign an Employee Responsible. On the relationship, I assign a sales area and the partner function Sales Representative. I also maintain other sales area data like payment terms. I transfer the account from CRM to ERP. The Sales Representative is not transferred to the partner function PE in the customer master in ERP. Why not?
I have done the following IMG-settings:
IMG: Customer Relationship Management => Basic Functions => Partner Processing => Data Transfer => Distribution of Partner Functions from SAP ECC into CRM
Partner function ERP Partner function CRM
VE (PE) 00000014 Employee Responsible (CRM)
IMG: Customer Relationship Management => Basic Functions => Partner Processing => Data Transfer => Distribution of Partner Functions from CRM into SAP ECC
Partner function CRM Partner function ERP Type ERP
00000014 VE PE
When I at a later stage edit the customer in VD02 in ERP, I add partner function VE manually.
When I then open the account in CRM, the sales representative added in ERP appears with the relationship "Has the Responsible Business Partner", CRMH06. I would have expected it to be "Has the Employee Responsible".
Any ideas are greatly appreciated.
Kind regards,
Johan WigertHello
Presently i am working on the same scenario,where i am trying to add employee in ECC and want to have the same BP in CRM under relationship tab as Employee Responsible but i am getting the following bdoc error
BP relationship C8323A4AA5D53555E1000000A05CCCAD 496E713643771182E1000000A05CCCAF BUR011: following errors occurred
Message no. BUPA_MW_EXCHANGE020
Relationship IEQ0002007496 IEQHR10048702 IEQ0000000000000000 do not exist
I maintianed the said custo settings in CRM with rel cat BUR011
Note: Employee number in ECC is say.. 9999 but in CRM the same employee is replicated as HR9999,hence will this creates any problem for relationship not to replicate from ECC TO CRM.
please let me know what needs to be corrected
Regards
Phani
Edited by: Phani Kumar on Jun 19, 2009 2:28 PM -
How to transfer hierarchy level 1 or level 2 in Contract from CRM to ERP?
Hi, Pro,
I face a requirement that hierarchy in contract transfer from CRM to ERP by RFC, but the material number what we wanna to entry are maintained in hierarchy 3. Therefore after you entry the hierarchy 1 or 2 that not 3, it occur an error warning stop the process.
Since I test manual entry a hierarchy by added a character '*" behind, it save and successfully archived that can using hierarchy 1, 2 and 3. I thought I solved the problem. But our ERP source is from CRM, so the only confuse me is that it can not transfer character '*' from crm to erp when it accour error like can match the hierarchy '12345*' .
Pls help me solve this solution.
Thanks a lot.
LorryI am using the bapi BAPI_CONTRACT_CREATEFROMDATA and BAPI_CUSTOMERCONTRACT_CHANGE.
-
Prevent replication of Contact Person from CRM to ERP
Hello,
we replicate business partner with role "Solt-to Party" from CRM to ERP.
But we want to prevent that the contact person of the Sold-tp Party is relicated too.
How we can realize this?
Thanks for help
Ronald PloßHello,
I have changed both objects (BUPA_MAIN / BUPA_REL) to Simple intelligent (msg). But in BUPA_REL you can only filter on BPARTNER.
In the scenario we need BUPA_REL for the replication of Employee responsible.
Thanks and regards
Ronald Ploß
Edited by: Ronald Ploß on Jun 23, 2008 4:19 PM -
Settings for transactions replication from CRM to ERP
Hi,
Can you explain or point to documentation on what settings we need to configure in CRM and ERP side to replicate the transactions such as quotation, Sales Order etc from CRM to ERP?
As I understand we can use Adapter Business objects in CRM to transfer the ERP documents to CRM transactions?
What is the method for transferring in the other direction?
What are the customization things we need to maintain in both systems? Such as having the same transaction and item category types defined in both systems etc..
Please clarify this replication process.
ThanksTake a look at the following notes:
620139
642944
888665
889051
And for replication of customazing and data take a look at building blocks B09 and C03.
However be aware that you will have to create transaction types and item category types on CRM, because this customazing can't be synchronized from ERP. So it has to be done manualy.
Regards. -
Data transfer ship-to party from ERP to CRM with role ship-to
We currently have an ERP system and we want to transfer the various customers to CRM but with different roles e.g. we want the ship-to accounts (account group 0002 in ERP) to be created with a role of ship-to in CRM. When we transfer the data at the moment, all accounts are being created in CRM with the role of sold-to.
Does anyone know if this is possible and if so, how?Hi Johan,
Thank you for your helpful response. Once we have done the initial transfer of data from ERP to CRM, we want the CRM system to be the master system for creating customer records. However, we will create some customers with a role of ship-to in CRM and we want to these to be transferred to CRM with an account group for ship-to customers. Do you know if this is possible?
Regards
Helen -
How to load prices from ERP to CRM
Dear All,
I'm trying to download product prices, customer specific prices and customer specific discounts from ERP 6.0 EHP5 system to CRM 7.0 EHP1. RFC connection works, I'm transferring customers to ERP by middleware. Also I've done initial load of materials from ERP to CRM. Problem is with prices. I did initial loads of: DNL_CUST_PRICE without errors, but prices are still not available in CRM WebUI. What is the next step?
Could you provide any instruction or SAP note?
thanks in advance,
regardsHello,
Before talking further about Web UI, first check whether condition records exist in CRM tables.
Also, check in table COMM_PRODUCT and BUT000 that whether Product and BP exist.
If yes, then if you are telling that there are 3 entries in CRM table for the same BP and Product,
then check mapping table CND_MAPM_CNV_REC for SOURCE_ID fields. Make sure, you have the correct
LOGSYS in this table for KNUMH-VARNUMH mapping.
If there are more than one SOURCE_ID present in this table, then chances of duplication is possible in condition tables.
You can also refer logs using txn CND_MAP_LOG_DISPLAY
Object: COND_EXCHANGE
Sub-object : CONDITIONS
And give 'from' 'to' correctly, to get the correct logs.
Hope this helps!
Best Regards,
Shanthala Kudva. -
Accessing BW/ERP/CRM from portal
Does any one have step by step guides for accessing BW/ERP/CRM from portal?
I would apprciate if you guys can share issues faced and resolutions for accessing them through portal.
Thanks,
Anikahi
BW/ERP/CRM access from portal is governed by a single concept of single sign on where actually you integrate them through logon ticket otherwise you can use application integrator component for user mapping
There is step by step guide of BW 3.5 integration with portal in sdn as well
http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/frameset.htm.
on similar grounds you will have CRM too
Portal and R3/CRM/BW in different windows domains
please do not forget points
with regards
subratokundu -
Different pricing procedure between CRM and ERP
Hello,
we`re using a CRM system which is connected to a ERP system. As not all pricing conditions from ERP are needed in CRM (an in addition the ERP pricing procedure is very complex), we would like to use a different (with less conditions) pricing procedure ind CRM.
But now, when we transfer an order from CRM to ERP, the pricing procedure from ERP gets downloaded into the order in CRM and the prices are lost. Therefore I have 2 questions:
1. Is it not possible to have a different pricing procedure in CRM than in ERP?
2. Is it possible to stop transferring the pricing procedure from ERP back to CRM when transferring orders?
Thank you in acvance for your help
JanHi, Jan.
1. Is it not possible to have a different pricing procedure in CRM than in ERP?
Yes. You can use different pricing procedure for you business documents.
We use this for quotation management with inergation CRM-ERP.
But, You must use same Condition Types and other objects.
Denis. -
Mapping Between Business Partners and Customers in CRM and ERP
Hi,
I wanted to know how are the business Partners and Customers replicated from ERP to CRM systems and Vice Versa. I would also want to know how can i check this mapping in the tables.
eg: Get a customer or BP from the ERP system, how do i find it in CRM system.
Regards,
RishavHi Rishav,
Here is how it works.
The table for customers in ERP is KNA1 and the field for customer number is KUNNR.
In CRM the table CRMM_BUT_CUSTNO contains the mapping between customer number in ERP and the BP GUID
in CRM. The table BUT000 in CRM contains the mapping between BP GUID in CRM and the BP Number
Apart from that the table CRMV_BUPA_CUSTNO contains the mapping between Business Partner Number and Customer.
Hope this clarifiies your doubt.
Best Regards,
Shourav.
Maybe you are looking for
-
I just installed December 2013 CU for Sharepoint 2010 with SP2. I runned the Product Configuration Wizards a couple of time and exexute "PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures". But still
-
Can I combine two itunes accounts and libraries?
I recently moved in with my girlfriend. I have an ipod and itunes library on my computer. she's kept her ipod sync'ed to her work computer. we have copied her library off of that computer to put it on mine. However, how do I do that and keep the libr
-
PLD: two type of currencies need different decimals in the same place
Hi! Expert; I have a problem with decimals in PLD. First, I tried currencies set up as "Without Decimal" but only works on System Variable areas. I'm not happy about this result. One currrency such as $, need two decimal places; however, the other
-
Lightroom is no longer connecting to Photoshop when I choose to "Edit in Photoshop"
I've no clue how to repair this, and without fixing this...any editing I do in photoshop will now seem to need to be manually added to Lightroom...which I do not even want to contemplate. When I rightclick on an image and select Edit in --> Photoshop
-
About using TRIM function...
//I'm posting this after whole search of past discussion as everybody wants to do so. :-) Hi, I want to trim out white spaces from colums in my table when select executes. I've read about TRIM function, but it does not as documented I think. See belo