Discount not applicable on some materials

I am coming across a scenario where for few material discount should not be given, there are some condition records for discount which applicable for all the materials.
Please suggest.
Regards
Rajesh

Hi,
1. In the material master record in Bsaic data 1 there is a filed called as 'material group.' Maintain this field for those materials for whom the discount is applicable. For those materials on which the discount will not be given do not enter any value in this field.
2. Go to V/03 and create a new condition table and select the field 'material group' along with the previous fields. Save it.
3. Go to V/07, delete the old condition table and assign the new condition table created in step no. 2. Save it.
4. Go to VK11, select the particular discount condition type, select the new key combination in which the field material group is also there and maintain the condition record for the material group.
Now all those materials for which the material group has been maintained , the discount will be given. For the remaining ones, no discount.
Hope this solves your problem.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

Similar Messages

Issue regarding 0MATERIAL_ATTR - Attribute not Updated for Some Materials

Hi All,
As per requirement, I had enhanced 0MATERIAL_ATTR DS with one customer field MRP Controller.
After enhancing 0MATERIAL_ATTR, I had made necessary changes in related objects like 0MATERIAL Info Object & related transformation for this new attribute.
After making changes, when I had done Repair full request for 0MATERIAL_ATTR, newly added attribute had not updated for all material, other attributes were updated correctly but MRP controller had not updated for some records.
I am confused with why attribute(MRP controller) updated in some Materials & for some materials its not updated.
I had checked in PSA, data for this added attribute is come in PSA but not updated in data target (0material).
I had also activated master data by running Attribute change run but still problem persist.
Please help.
Regards,
Divyesh Khambhati

Hi Venkatesh,
I had write code in CMOD for MRP controller.
As data is coming fine till PSA but its not updated in Data Target (0MATERIAL) .
if I take one example..
For exp Material XYZ has two entries in PSA table, one is updated during delta load & recent one which come though Repair Full request.
Now newly adder attribute MRP controller available in recent request of Repair Full but that is blank in case of prior delta update.
I am confused because MRP controller attribute is updated for some Material but for some material its remain blank.
please help.
regards,
Divyesh Khambhati

Regarding OBD is not created for some materials

Hi,
I have created one STO using BAPI_PO_CREATE1 with 10 articles,for that STO,OBD is automatically created.In that OBD is created for 7 articles and for the remaining 3 articles OBD is not created.Can any one tell me,what is the reason?
Thanks

Dear Arun,
You wrote
=============
Cache is first in first out... if you exceute too many queries then cache might force out the first query for want of memory. Check the cache immediately after the query is ruin once then you should also check the cache settings for the query in RSRT to see if cache is enabled for the query. Ideally the option for cache should be " Main memory cache with swapping " in RSRT.
==============
I executed my query in question as the first query but no cache was created. The options for the cache mode was 'H Query reads data upon navigation' and 'main memory without swapping' along with a tick in the 'Query cache added to Delta' checkbox.
Just to check, i went on removing formulaes and calculated key figures and free characteristics from the query one by one and in the end the cache did get created for the same query. But I still could not pinpoint the exact reason for the query not producing cahce in its original form.
It only makes me think that there may be a particular scenarios or a peculiarity pertaining to the design of a query, that would prevent its cache being generated.
regards,
Kulmohan

Not Applicable Button?

Hi there,
I was wondering if there was a way to add a Not Applicable button to one of the interview screens, and if the user selects not applicable, they can continue the interview, and also pass the interview. Or, is this something I need to be writing in my rules. I know there is an uncertain button option in screen building, but that's not really what i am looking for.
Thanks!

Breaking this down into two components. First, do you want "not applicable" to be an answer that you can/should reason about in your policies and does such a response in fact represent something different than uncertain? (e.g. A person is eligible if something is true or if it is not applicable, whereas they MIGHT be eligible when it is uncertain and they are not eligible when the something is false) If this is the case, then you will need to use a variable attribute (let's assume text) rather than a boolean to represent the four distinct responses (i.e. T, F, NA with uncertain being the lack of a response, empty string / default). You could then determine a boolean attribute based on "T" or "F" responses (i.e. "the person's was an active duty veteran") and a separate boolean for not applicable (i.e. "the person's veteran status is not applicable").
The second part is "button" vs. text attribute as assumed above. If the above 4 possible value response is what is desired I am not sure how you present a button to represent "not applicable" and some other control for "true, false, uncertain" and target the same attribute. If splitting the controls, I would suggest two different attributes one is the factual "applicable and true, false or uncertain" and the button is used for the "not applicable" attribute (defaulting to applicable unless explicitly set to not applicable by the user and if both questions are on the same screen, use a warning if there are inconsistent answers between the two.

Some materials are used by WM and some materials are not used by WM in SLOC

Dear Experts.
We are going to use WM in F100 Storage Location.
But because of business, Some materials(A) will be managed by WM and some materials(B) will be not managed by WM in same storage location.
So some materials(A) have WM view in material master and some materials(B) have no WM view.
But when posting GR for material(B), error occurs.
the message is as below.
Material 6850009 does not exist in warehouse F01
Message no. L9023
Diagnosis
All the materials that you use within a warehouse number must also be defined for this warehouse number. The material you are using is not defined.
Procedure
If you want to use the material within your warehouse number, you must create the material in the material segment for that warehouse number.
Let me know how to fix it.
We are going to use WM in A sloc.
In A Sloc, some material are managed by WM level and some material are managed by only MM level.
Thank you in advance.
Best reagrds,
Kil-Nam

You assign a warehouse to a storage location, which means that the entire storage location is warehouse managed. all materials in this storage location have to have a WM view,
It is not possible to decide it on material level if it is subject to WM or not.
You have to create an extra storage location for the non-WM-materials to meet your requirement

HELP! InDesign CC got an error: The property is not applicable in the current state." number 30615

HELP! Was working perfectly now it is giving me this error and doesn't seem to be going past the printing option. Code is below.
main.scpt
set posixIdPath to "/Applications/Adobe InDesign CC/Adobe InDesign CC.app"
do shell script "/Users/cdapice/Desktop/cryptoquip/getquip.sh"
delay 8
tell application posixIdPath
activate
end tell
delay 8
set scripttoRun to ":Users:cdapice:Desktop:cryptoquip:Script.jsx" as alias
tell application "Adobe InDesign CC"
do script scripttoRun language javascript
end tell
delay 5
Adobe InDesign CC got an error: The property is not applicable in the current state." number 30615
Script.jsx
var myDocument = app.open(File("/Users/cdapice/Desktop/cryptoquip/NewCryptoquip.indt"), true);
//var myDocument = app.activeDocument;
var myPage = myDocument.pages.item(0);
var myTextFrame = myPage.textFrames.add();
//Place a text file in the text frame.
//Parameters for TextFrame.place():
//File as File object,
//[ShowingOptions as Boolean = False]
//You'll have to fill in your own file path.
myTextFrame.place(File("/Users/cdapice/Desktop/cryptoquip/quips.txt"));
//var myTextFrame = app.selection[0];
myTextFrame.parentStory.pointSize = 10;
var brkStory = myTextFrame.parentStory.contents;
var myPIs = myDocument.pageItems;
var destTextFrame = myPIs[6];
destTextFrame.parentStory.contents = brkStory;
firstChange();
myTextFrame.remove();
app.select(destTextFrame);
splitStory();
for (i = 0; i < myPIs.length; i++) {
          if (myPIs[i].appliedObjectStyle.name == "puzzleBox") {
                    var newBoxStyle = myPIs[i].appliedObjectStyle;
                    secondChange(myPIs[i]);
        myPIs[i].applyObjectStyle(newBoxStyle,true);
    if(myPIs[i].appliedObjectStyle.name == "otherBox"){
        var newBoxStyle = myPIs[i].appliedObjectStyle;
        myPIs[i].applyObjectStyle(newBoxStyle,true);
Date.prototype.getMonthFormatted = function() {
    var month = this.getMonth() + 1;
    var formMonth = month < 10 ? '0' + month : month; // ('' + month) for string result
          return formMonth.toString();
Date.prototype.getDayFormatted = function() {
    var day = this.getDate();
    var formDay = day < 10 ? '0' + day : day; // ('' + day) for string result
          return formDay.toString();
var newdate = new Date();
var laterdate = new Date();
var dayofweek = newdate.getDay();
var offsetdays = 0;
switch(dayofweek) {
    case 2:
        offsetdays = 6;
        break;
    case 3:
        offsetdays = 5;
        break;
    case 4:
        offsetdays = 4;
        break;
    case 5:
        offsetdays = 3;
        break;
app.epsExportPreferences.appliedFlattenerPreset.convertAllStrokesToOutlines = true;
app.epsExportPreferences.appliedFlattenerPreset.convertAllTextToOutlines = true;
app.epsExportPreferences.appliedFlattenerPreset.rasterVectorBalance = 100;
//app.activeDocument.exportFile(ExportFormat.epsType, newFile, false);
for (i = 1; i < 7; i++) {
    var curPage = i + "";
    var x = i + (offsetdays - 1);
    laterdate.setMonth(newdate.getMonth());
    laterdate.setDate(newdate.getDate());
    //alert(newdate);
    //alert(x);
    //alert(laterdate);
    laterdate.setDate(newdate.getDate() + x);
    //alert(laterdate);
    var nameDate = laterdate.getMonthFormatted() + laterdate.getDayFormatted() + ".eps"
    //alert(nameDate);
    app.epsExportPreferences.pageRange = curPage;
    var curFile = new File("/Users/cdapice/Desktop/cryptoquip/" + nameDate);
    app.activeDocument.exportFile(ExportFormat.epsType, curFile, false);
var endDate = laterdate.getMonthFormatted() + laterdate.getDayFormatted();
var firstDate = new Date();
firstDate.setDate(newdate.getDate() + offsetdays);
var startDate = firstDate.getMonthFormatted() + firstDate.getDayFormatted();
var idFile = "cryptoquip_" + startDate + "_" + endDate + ".indd";
app.activeDocument.save(new File("/Users/cdapice/Desktop/cryptoquip/" + idFile));
with (app.activeDocument.printPreferences){
        printer = "Advertising - Creative - Color Xerox";
        copies = 1;
        pageRange = "1-6";
        paperSize = "US Letter";
        paperHeight = "11 in";
        paperWidth = "8.5 in";
        printPageOrientation = PrintPageOrientation.landscape;
        pagePosition = PagePositions.centered;
       scaleHeight = 100;
       scaleWidth = 100;
        scaleMode = ScaleModes.scaleWidthHeight;
        scaleProportional = true;
        pageInformationMarks = true;
        colorOutput = ColorOutputModes.COMPOSITE_CMYK;
app.activeDocument.print(false);
for(myCounter = app.documents.length; myCounter > 0; myCounter--){
app.documents.item(myCounter-1).close(SaveOptions.no);
function firstChange() {
          app.findTextPreferences = NothingEnum.NOTHING;
          app.changeTextPreferences = NothingEnum.NOTHING;
          app.findChangeTextOptions.caseSensitive = false;
    app.findTextPreferences.findWhat = "^t";
          app.changeTextPreferences.changeTo = "";
          myDocument.changeText();
          app.findTextPreferences = NothingEnum.NOTHING;
          app.changeTextPreferences = NothingEnum.NOTHING;
     app.findTextPreferences.findWhat = "^p^p";
          app.changeTextPreferences.changeTo = "^p";
          myDocument.changeText();
          app.findTextPreferences = NothingEnum.NOTHING;
          app.changeTextPreferences = NothingEnum.NOTHING;
          app.findTextPreferences.findWhat = "^p";
          app.changeTextPreferences.changeTo = "^R";
          myDocument.changeText();
          app.findTextPreferences = NothingEnum.NOTHING;
          app.changeTextPreferences = NothingEnum.NOTHING;
function secondChange(curFrame) {
          app.findTextPreferences = NothingEnum.NOTHING;
          app.changeTextPreferences = NothingEnum.NOTHING;
          app.findChangeTextOptions.caseSensitive = false;
    app.findTextPreferences.findWhat = "    ";
          app.changeTextPreferences.changeTo = "|";
          curFrame.changeText();
          app.findTextPreferences = NothingEnum.NOTHING;
          app.changeTextPreferences = NothingEnum.NOTHING;
     app.findTextPreferences.findWhat = " ";
          app.changeTextPreferences.changeTo = "";
          curFrame.changeText();
          app.findTextPreferences = NothingEnum.NOTHING;
          app.changeTextPreferences = NothingEnum.NOTHING;
          app.findTextPreferences.findWhat = "|";
          app.changeTextPreferences.changeTo = " ";
          curFrame.changeText();
          app.findTextPreferences = NothingEnum.NOTHING;
          app.changeTextPreferences = NothingEnum.NOTHING;
function splitStory(){
          //Make certain that user interaction (display of dialogs, etc.) is turned on.
          app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
          if(app.documents.length != 0){
                    if(app.selection.length != 0){
                              //Get the first item in the selection.
                              var mySelection = app.selection[0];
                              //Process the selection. If text or a text frame is
                              //selected, do something; otherwise, do nothing.
                              switch(mySelection.constructor.name){
                                        case "Text":
                                        case "InsertionPoint":
                                        case "Character":
                                        case "Word":
                                        case "Line":
                                        case "TextStyleRange":
                                        case "Paragraph":
                                        case "TextColumn":
                                        case "TextFrame":
                                                  //If the text frame is the only text frame in the story, do nothing.
                                                  if(mySelection.parentStory.textContainers.length > 1){
                                                            //Splitting the story is a two-step process: first, duplicate
                                                            //the text frames, second, delete the original text frames.
                                                            mySplitStory(mySelection.parentStory);
                                                            myRemoveFrames(mySelection.parentStory);
                                                  else{
                                                            alert("Please select a story containing more than one text frame and try again.");
                                                  break;
                                        default:
                                                  alert("Please select some text or a text frame and try again.");
                    else{
                              alert("Please select some text or a text frame and try again.");
          else{
                    alert("Please open a document and try again.");
function mySplitStory(myStory){
          var myTextFrame;
          //Duplicate each text frame in the story.
          for(var myCounter = myStory.textContainers.length-1; myCounter >= 0; myCounter --){
                    myTextFrame = myStory.textContainers[myCounter];
                    myTextFrame.duplicate();
function myRemoveFrames(myStory){
          //Remove each text frame in the story. Iterate backwards to avoid invalid references.
          for(var myCounter = myStory.textContainers.length-1; myCounter >= 0; myCounter --){
                    myStory.textContainers[myCounter].remove();

Hotfixes are special, out-of-band patches created to fix specific problems, so they are never published to Windows Update. Often the hotfix gets incorporated into a released patch that is published on Windows Update. If this hotfix was incorporated
into a released patch, and you applied that patch to your system, the hotfix would see that its files are older than the latest files on the system and would give you this message. Because the hotfix is not for general distribution, there is rarely documentation
saying that it has been superceded.
Generally there is a file list with a hotfix/patch that gives you the version number of the affected files. You can go through those files to see that you have the latest files. The problem is finding the actual patch that updated those files.
Without going through lots of patches, it is hard to find which patch made the hotfix obsolete.
.:|:.:|:. tim

Group Policy not work in some client machine.

Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.

Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Windows 2008 R2 SP1 Windows update not applicable

HELP!!! We have 3 Windows 2008 R2 servers that were updated with SP1 back in March. Last month we noticed on our Retina audit that the three servers were missing several Windows critical patches that were released after SP1 was applied. WSUS did not report
any missing patches for those three servers. When we tried to manually apply those missing patches we get the error message "This update is not applicable to your computer". After some troubleshooting we found that KB976932 (Service Pact 1) is not listed in
installed updates. However, system property shows Windows 2008 R2 SP1 Enterprise Edition. We are certain that SP1 did NOT come pre-installed. Microsoft Baseline Security Analyzer detected no missing patches. Microsoft System Readiness Tool CBA logs show no
errors. Ran SFC /SCANNOW and found no error also. Force install of the patches with command switch /wuforce, did not work we still get the same message patch not applicable. We compared our servers that are fully patched running Windows 2008 R2 SP1 against
the three unpatched servers and found several dll and sys file's version to be different. Those dll and sys files are also the files that would have been updated by the critical patches. The only thing different between the fully patched Windows 2008 R2 SP1
servers and the unpatch are the unpatch have no public internet access. We confirmed patches that were required prior to SP1 push are installed: KB2454826 KB2534366 KB2533552 KB976902 Confirmed: Partition with Windows 2008 R2 SP1 installed is set to "ACTIVE"
Windows Event Collector service is started Windows Modules Installer is started Uninstalling SP1 is not possible because the KB976932 is not listed and verified "not hidden" in installed updates list. Rebuilding the three servers are the very last option,
since they are critical. Other than the missing patches.... the servers are running great, we have no reported issues with the three servers. Attempt to reinstall SP1 failed after reboot, error 0X800F0826. If anyone has experience this problem and know of
a solution please help.

Hi,
I would like to confirm that what updates are not applicable for your three Windows Server 2008 R2 SP1 servers?
Based on the current situation, please run the System Update Readiness Tool as Meinolf Weber mentioned and check the CheckSUR.persist.log for the corrupted
files. After that, please refer to the following Microsoft TechNet article for how to repair them.
Advanced guidelines for diagnosing and fixing servicing corruption
http://technet.microsoft.com/en-us/library/ee619779(WS.10).aspx
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can't download photoshop elements 13 purchased on line with download page showing not applicable. what must I do next?

Can't download Photoshop elements 13 purchased on line with download page showing not applicable.
What must I do next?
Years ago started with Photoshop 2.0 advanced to Photoshop Deluxe 4.0 so far so good.
Purchased Photoshop Elements 8 some time ago, but never got help because Elements never downloaded
and can only use it just to open pictures that's all.
Now I Purchased adobe Photoshop Elements 13 and if I can't download this one with no help
with a Trouble Ticket # 186456123 still pending after a week of promises from support calling
1-800-833-6687 after 4 phone calls, to call me back.
Who can I call to get my money back?
My name is Gunter Krummet (nicknamed Bill)
My phone number is 815-385-1761
My Email is [email protected]
Thank You to anyone that contacts me.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

An update installed using DISM in install.wim seen as "Not Applicable" by WSUS report instead of "Installed"

Hi all,
To make server's installation faster, I intend to make an updated "install.wim" every 6 months using DISM.
Then, after installation, the Win2012R2 server connect to a WSUS server to get the latests update not included in the install.wim.
As a test, I used DISM to install an update in the install.wim file of Windows 2012R2 sources.
In a new installed Windows server 2012R2, I can see that the KB is installed.
But on the WSUS report of this server, the status of the KB included in the install.wim by DISM displayed as "Not applicable".
Is it because WSUS did not installed it itself ?
Is there a way to display it as "installed" in the report, even if the patch had not been installed by the WSUS server ?
Thanks
ML

But on the WSUS report of this server, the status of the KB included in the install.wim by DISM displayed as "Not applicable".
Very possible, and likely.
It depends on how the detection logic of the update has been written. In some cases, detection logic is based on what an installer does during installation, e.g. create and/or set a registry key or value. This may not happen when injecting an update into
an image using DISM. As a result, the detection logic will not see the necessary flags it's looking for to determine that an update is "Installed" vs "Not Applicable".
You also have to think of this in terms of the baseline image installed on the system. To be true, a baseline image that already has the necessary content is, in fact, "Not Applicable", and has, in fact, not actually been installed to that machine.
Most often you see this in the realm of installing images with slipstreamed service packs.
Consider a scenario with a slipstreamed Win7SP1 baseline. Functionally speaking, all previous updates are contained within that SP1 baseline, but if you inspect the state of the actual updates in WSUS, they will all be listed as Not Applicable. They're not
actually "installed", and they cannot be installed, thus the only viable remaining state is "Not Applicable", which is true -- because they cannot be installed on an SP1-based machine. (Functionally they are superseded, which is also a
contributing factor to the state of "Not Applicable".)
There is no way to display it as "Installed". It's not. This is something that should be documented in the declaration of the baseline image you're using (by patching up the image with DISM once every six months).
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Discount is applicable against date of deposit or realiasation of cheque

hi,
sap gurus,
good evening to all
i am not sure whether discount is applicable against date of deposit
or
date of realisation of cheque.
but this is periodic based.
can any one identify the type business process applicable in R/3.
regards,
balaji.t
09990019711

Hi
The Cash Discount calculation starts depending on the Baseline configured in definition of the Terms of Payment in OBB8. You can check there the various options available under base line date.
Thanks,
Ravi

Patch Management config - Enable not applicable patches

Hi,
I am trying to clean our list of enabled patches in order to reduce the time taken by the analyze.exe. I plan to uncheck the "Enable not applicable patches" in the ZPM Configuation and asked myself when a patch is "not applicable", because there are not applicable patches in our list, some devices are patched with so I think disabling not applicable patches will result in missing patches that could be useful.
Thanks for every enlightenment
Yves

Hi
Well this part has been left out of the docs (Help), so yes not easy to see what this really covers. But my guess is that you should be fine deselecting this, if it's not applicable it should mean that you have no devices in need of the patch.

[ISE] Posture Status - Not applicable

Hi,
I configured WiFi Guest Access with WLC and ISE and it works great.
Now I want to check client posture.
I configured a posture policy
On Windows7 client, I installed NAC client. With network sniffer, I can see SWISS protocol (TCP 8905) between client and ISE.
In authentications log, Posture Status is always "NotApplicable"
Why is this posture not applicable?
Thanks a lot!
Patrick

Hello Tarik,
Result NonCompliant: http://uploaddeimagens.com.br/imagens/result_noncompliant-jpg
Posture rule: http://uploaddeimagens.com.br/imagens/posture_rule-jpg
The client provisioning is set to force NAC Agent version 4.9.0.47
Yes, the vlan is correct.
The major problem is the NotApplicable ststus in the posture log, the ISE is not applying the posture, some times works fine, some times dont work and appear the NotApplicable in the log.

IE11 Install Fail - Prerequisites KB2533623 is not applicable to your computer

I am unable to install IE11 on both my x32 and x64 Dell laptops because it's missing KB2533623. But when I try to install the KB2533623, I get "The update is not applicable to your computer". Please assist.

I am unable to install IE11 on both my x32 and x64 Dell laptops because it's missing KB2533623. But when I try to install the KB2533623, I get "The update is not applicable to your computer". Please assist.
Probably means that one update's criteria is not the same as another's. Look at the log files to determine exactly what they are. E.g. probably an out-of-date module that the first update thinks it knows how to fix by using its suggestion but which
really needs to be fixed some other way. So, if you fixed whatever it is properly you wouldn't get the bogus suggestion. Etc.
Robert Aldwinckle

Windows Update fails: KB2957189 is not applicable to your computer

Hello,
I am having trouble with some Windows Updates on a Win2012R2 Server.
We have two servers which will become nodes in a 2-node-cluster. The Cluster Configuration Wizard complains about four updates not present on Server A but ok on Server B.
Both servers are identical - same model, same time of installation etc.
These are the updates the Cluster Configuration Wizard complains about:
KB2957189 - not in list of installed updates on both machines
KB2918614 - present in list of installed updates on both machines
KB2926765 - present in list of installed updates on both machines
KB2939087 - present in list of installed updates on both machines
When I try to manually install the update KB2097189 on Server A I get this error "Windows Update Standalone Installer - This update is not applicable to your computer". However if I try the same update file on Server B I get
"this update is already installed on this computer".
I already read that 2918614 can sometimes break Windows Update on a machine but am not sure how to proceed.
What I need to achieve is an identical update state on both machines to make the Cluster Configuration Wizard accept the config. It is the only issue we have.
Any ideas?
Regards, rj
Regards, Ralph

Thanks for the reply!
The issue is a bit more tricky:
The Cluster Configuration Wizard complains about those four updates not being installed on Server A.
Server B is fine.
The displayed list of installed updates on both servers is IDENTICAL.
When I try to run manual setup for KB2097189:
Server A: "This update is not applicable for your Computer"
Server B: "This update is already installed on your Computer"
KB2957189 is not visible in the list of installed updates on either machine.
KB2918614, KB2926765 and KB2939087 however, are.
Kind of clueless here. Seems to me Server A has a glitch in Windows Update itself...
Regards, Ralph

Discount not applicable on some materials

Similar Messages

Maybe you are looking for