Discoverer 10g error when scheduling a workbook using 2 calculations

When I schedule in discoverer 10 g using 2 calculations it return this error ora-01722 Invalid Number
If I schedule the workbook with only one of the calculation it run perfectly.
If I run the query manually using the 2 calculations it run perfectly.
Calculation are created by me and do not have any error in the code
Same problem occur using DECODE or CASE.
Please help

Hi
this is bug, refer to doc id: 472947.1 in metalink
you need to download the Patch 6493304.
regards,
Jay

Similar Messages

Error when scheduling a workbook

Has anyone come accross this error before when scheduling a workbook thru the Scheduling Manager in Discoverer Plus 10gR2?
"Exceeded maximum query size". All worksheets run to a sucessful completion when you run them one at a time.
Thanks Brent

Hi
this is bug, refer to doc id: 472947.1 in metalink
you need to download the Patch 6493304.
regards,
Jay

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

Error when working with TableView using JCA

Hi sdns,
I am getting an iview rutnime error when working with Tableview using JCA. Here i am putting all my code, go thorugh it and tell me if any error is there.One more thing is Usermappping and all properties are set to system object.
Now you can throught he code which is followed by error also.
Java file.
public class DisplayComponent extends PageProcessorComponent {
 public DynPage getPage() {
 return new DisplayComponentDynPage();
 public static class DisplayComponentDynPage extends JSPDynPage {
 private JCATviewBean bean;
 public void doInitialization() {
 IPortalComponentProfile profile =
 ((IPortalComponentRequest) getRequest())
 .getComponentContext()
 .getProfile();
 Object o = profile.getValue("myBean");
 if (o == null || !(o instanceof JCATviewBean)) {
 bean = new JCATviewBean();
 profile.putValue("myBean", bean);
 } else {
 bean = (JCATviewBean) o;
 // fill your bean with data here...
 IPortalComponentRequest request =
 (IPortalComponentRequest) this.getRequest();
 doJca(request);
 public void doProcessAfterInput() throws PageException {
 public void doProcessBeforeOutput() throws PageException {
 this.setJspName("Report.jsp");
 private IConnection getConnection(
 IPortalComponentRequest request,
 String alias)
 throws Exception {
 IConnectorGatewayService cgService =
 (IConnectorGatewayService) PortalRuntime
 .getRuntimeResources()
 .getService(
 IConnectorService.KEY);
 ConnectionProperties prop =
 new ConnectionProperties(
 request.getLocale(),
 request.getUser());
 return cgService.getConnection(alias, prop);
 public void doJca(IPortalComponentRequest request) {
 IConnectionFactory connectionFactory = null;
 IConnection client = null;
 String rfm_name = "BAPI_COMPANYCODE_GETLIST";
 try {
 try {
 // pass the request & system alias
 // Change the alias to whatever the alias is for your R/3 system
 client = getConnection(request, "MyIDES");
 } catch (Exception e) {
 System.out.println(
 "Couldn't establish a connection with a target system.");
 return;
Start Interaction
 IInteraction interaction = client.createInteractionEx();
 IInteractionSpec interactionSpec =
 interaction.getInteractionSpec();
 interactionSpec.setPropertyValue("Name", rfm_name);
CCI api only has one datatype: Record
 RecordFactory recordFactory = interaction.getRecordFactory();
 MappedRecord importParams =
 recordFactory.createMappedRecord(
 "CONTAINER_OF_IMPORT_PARAMS");
 IFunctionsMetaData functionsMetaData =
 client.getFunctionsMetaData();
 IFunction function = functionsMetaData.getFunction(rfm_name);
 if (function == null) {
 System.out.println(
 "Couldn't find " + rfm_name + " in a target system.");
 return;
How to invoke Function modules
 System.out.println("Invoking... " + function.getName());
 MappedRecord exportParams =
 (MappedRecord) interaction.execute(
 interactionSpec,
 importParams);
How to get structure values
 IRecord exportStructure = (IRecord) exportParams.get("RETURN");
 String columnOne = exportStructure.getString("TYPE");
 String columnTwo = exportStructure.getString("CODE");
 String columnThree = exportStructure.getString("MESSAGE");
 System.out.println(" RETURN-TYPE = " + columnOne);
 System.out.println(" RETURN-CODE = " + columnTwo);
 System.out.println(" RETURN-MESSAGE =" + columnThree);
How to get table values
 IRecordSet exportTable =
 (IRecordSet) exportParams.get("COMPANYCODE_LIST");
 exportTable.beforeFirst();
 // Moves the cursor before the first row.
 while (exportTable.next()) {
 String column_1 = exportTable.getString("COMP_CODE");
 String column_2 = exportTable.getString("COMP_NAME");
 System.out.println(
 " COMPANYCODE_LIST-COMP_CODE = " + column_1);
 System.out.println(
 " COMPANYCODE_LIST-COMP_NAME = " + column_2);
 // create the tableview mode in the bean
 bean.createData(exportTable);
Closing the connection
 client.close();
 } catch (ConnectorException e) {
 // app.putValue("error", e);
 System.out.println("Caught an exception: \n" + e);
 } catch (Exception e) {
 System.out.println("Caught an exception: \n" + e);
Bena file
package com.sap.JCA.bean;
import java.util.Vector;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.table.TableViewModel;
public class JCATviewBean {
 public DefaultTableViewModel model;
 public TableViewModel getModel() {
 return this.model;
 public void setModel(DefaultTableViewModel model) {
 this.model = model;
 public void createData(IRecordSet table) {
// this is your column names
 Vector column = new Vector();
 column.addElement("Company Code");
 column.addElement("Company Name");
// all this logic is for the data part.
 Vector rVector = new Vector();
 try {
 table.beforeFirst();
 while (table.next()) {
 Vector data = new Vector();
 data.addElement(table.getString("COMP_CODE"));
 data.addElement(table.getString("COMP_NAME"));
 rVector.addElement(data);
 } catch (Exception e) {
 e.printStackTrace();
// this is where you create the model
 this.setModel(new DefaultTableViewModel(rVector, column));
JSP File:
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.sap.JCA.bean.JCATviewBean" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
 <hbj:form id="myFormId" >
 
 <hbj:textView id = "tv1" text = "TableView Example Using JCA "/>
<hbj:tableView
 id="myTableView1"
 model="myBean.model"
 design="ALTERNATING"
 headerVisible="true"
 footerVisible="true"
 fillUpEmptyRows="true"
 navigationMode="BYLINE"
 selectionMode="MULTISELECT"
 headerText="TableView example1"
 visibleFirstRow="1"
 visibleRowCount="30"
 width="500 px"
 />
 </hbj:form>
</hbj:page>
</hbj:content>
Error when Executing this component:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 12:21_28/10/05_0173_94105150
See the details for the exception ID in the log file
If anybody find the error please reply to this post.
Regards,
sireesha.

Thanks for your response Martin,
I have already seen the log file but im couldn't findout anything from that since it is so long here im putting some part of please see this.if u able to find it clarify me,
Here the log file:
1.5#001321FD6213005D0000907100001CB000040419258FBF4E#1130405957843#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907200001CB00004041925916735#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907300001CB0000404192591688D#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120E00001CB00004041925C953D7#1130405961625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907400001CB000040419275B24FC#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907500001CB000040419275B25D9#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907600001CB000040419275B2E27#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907700001CB000040419275B2EFA#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD6213005D0000907800001CB0000404192924ED59#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907900001CB0000404192924EE36#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907A00001CB0000404192924F652#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907B00001CB0000404192924F710#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120F00001CB000040419295CCD8B#1130406021625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907C00001CB0000404192AEEB1E2#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907D00001CB0000404192AEEB2C0#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907E00001CB0000404192AEEBAD8#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907F00001CB0000404192AEEBB9E#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#

Error when scheduling job (JOB_SUBMIT) when execute PC in WAD

Dear BIers,
I execute a Process Chain in commond button of WAD, however, I got the error message:
Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8
Returncode '8' means ' Error when scheduling job (JOB_SUBMIT).
Any suggestions are appreciated.
B.R
Gerald

Dear Raju,
Have you checked SM21? Maybe you have a problem with your TemSe object. If this is the case a basis guy should know how to handle it.
Greetings,
Stefan

Getting error when schedule a webi report

Hi All,
I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
Could anyone help me regarding the error?
Regards

Hai
Check this Links
http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi report to save as excel and send to an email account. What things to look for?

yes you should read the administration documents,
go to CMC, find "servers"
then "destination job server"
then click the "destination " tab
you will find some parameters, you have to configure it you.
the same scenario will be done to the "web intelligence job server"
good luck
Amr

TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

I get "server error" when I try to use icloud.1 on my Windows 7 pc
How do I resolve this problem?

Hi doggywag,
Yes, you must have an iOS device or a Mac to create an iCloud account.
Cheers,
GB

Error when I try to use the XMLElement(), XMLForest(), etc functions?

I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a quick question and answer it for me!
Cheers,
Fish

Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later..

DB Version Error when install SOA Suite using with DB 10G 10.2.0.1

Hi,
I am trying to install SOA Suite 10.1.3.1.0 in Windows XP environment where an Oracle 10g database 10.2.0.1 is pre-installed. When I try to use Advanced Installation, the system says that my database version should be 10.2.0.2 or higher. I couldn't find any 10.2.0.2 version or higher for Windows XP on Oracle download site. There is only 10.2.0.3 for Windows Vista. Anyone knows whether there is a workaround?
Thanks in advance,
Jeff

Hi, I met this problem some weeks early. I wrote a conlusion about this:
Update Oracle Database 10.2.0.1 to 10.2.0.2 on Windows XP
When I install Oracle SOA Suite 10g Release 3(10.1.3.x, soa_windows_x86_101310_disk1.zip download from http://www.oracle.com/technology/software/tech/soa/index.html), a error occured. Because the version of Oracle Database on my laptop is 10g Release 2 (10.2.0.1). Then I download the update patch p4547817_10202_WINNT.zip from metalink.oracle.com and install the database without installing the starter database and instance (orcl). After this, use p4547817_10202_WINNT.zip to updata Oracle Database 10.2.0.1 to 10.2.0.2 and then use DBCA to install a new database and instance (orcl).
Summary:
1. patch: p4547817_10202_WINNT.zip downloaded from metalink.oracle.com
2. only install Oracle database software, don't install any database or instance
3. use p4547817_10202_WINNT.zip to update the database software
4. use DBCA to install a new database
Question:
1. how to update when there already exist data in database?
2. Oracle database express edition isn't stabile enough? Because there are always some error appear during SOA Order Booking demo using.

Errors when scheduling scenarios for agents using load balancing

Hi,
I have set up my ODI environment and have successfully manged to:
* run scenarios manually in development repository
* schedule scenarios and run on execution repository with one agent.
However when I try to set up a second agent to load balance the scenarios I get the following error below.
It seems to be a load balancing problem because I can run the scenario's successfully in every other case.
I am running an oracle RAC database. (2 servers, one oracle instance on each). I have set up one ODI agent on each server and I am trying to load balance between these 2 agents.
In topology I have set up 1 logical agent. Physical agent 1 is linked to itself and also to Physical Agent 2 under the load balancing tab.
For my scenario's I have 2 master scenarios (which are the ones scheduled) that call a number of other scenarios in the correct order.
Could anyone assist me please?
Thanks,
Matthew
Error:
====
java.lang.NullPointerException
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.E(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.a(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(Unknown Source)
     at com.sunopsis.dwg.tools.StartScen.actionExecute(Unknown Source)
     at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.y(Unknown Source)
     at com.sunopsis.dwg.cmd.e.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hi,
I'm wondering whether there may be a design flaw in the way our scenario's have been created / are executed.
Currently we have x number of scenarios executed by a x master scenario.
There are also y number of scenarios executed by a y master scenario.
These master scenarios are the ones scheduled against the agent and they call the "sub-scenarios".
We experience the above error when one of the "sub-scenarios" of a master scenario is executed on a different agent to where the master scenario is executed.
Any help greatly appreciated.
Thanks,
Matt

Error while scheduling a workbook

Hello.
I'm trying too schedule one of my wDiscoverer Workbook, but I meet a SQL error :
+"ORA 04063 : package body MYUSER.EUL5_BATCH_USER" contain errors.+
PL/SQL : uni program called "MYUSER.EUL5_BATCH_USER" doesn't exists
I searched on the forum, and I found this workaround :
Error when trying to schedule a workbook
So I granted select on my user, but it didn't work better since.
Is there another solution ?
Thanks for help !
PS : I'm on Discoverer Desktop

Hi,
You need the follow database object priviliges:
GRANT SELECT ON v$PARAMETER TO MYUSER;
GRANT EXECUTE ON DBMS_SQL TO MYUSER;
GRANT EXECUTE ON DBMS_JOB TO MYUSER;
Alternatively, you could grant the following system privileges:
GRANT CREATE PROCEDURE TO MYUSER;
GRANT CREATE TABLE TO MYUSER;
GRANT SELECT ANY TABLE TO MYUSER;
GRANT CREATE SESSION TO MYUSER;
GRANT CREATE VIEW TO MYUSER;
GRANT EXECUTE ANY PROCEDURE TO MYUSER;
GRANT SELECT ANY DICTIONARY TO MYUSER;
Rod West

Schedule a Workbook using PL/SQL Function.

Hi,
Trying to schedule a workbook which uses a PL/SQL function(the function inserts some values to a custom table).
Workbook when run in desktop works fine and am able to see the results. but when run as a scheduled workbook it results with an error: Single query returns multiple rows.
Any Ideas to get around this problem...
Thanks!
Nani.

There could be a multitude of problems. Somewhere, the PL/SQL is selecting data using a SELECT ... INTO ... FROM type construct. Problem is that multiple records are being returned, and the code wants a cursor or some other mechanism.
Look at the places where the PL/SQL is selecting data, and make sure that only 1 row is being returned. The PL/SQL code may need to be modified to purge data before or after to ensure subsequent runs will not be a problem. There could also be a commit statement out of place that isn't committing a deletion, or is preventing a rollback.
With the way the workbook is scheduled, the PL/SQL could get called multiple times, but this seems unlikely as it works fine in desktop.

ERROR when taking an export using EXPDP

Hi There,
I am receiving the following error when perform the scheduled nightly backup. The strange thing is the production instance has the same setup and it is not having this problem. The following parameters (memory_target, memory_max_target and streams_pool_size) are not being used in the production and non-production database base. They are all set to "0".
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
UDE-04031: operation generated ORACLE error 4031
ORA-04031: unable to allocate 56 bytes of shared memory ("streams pool","unknown object","streams pool","fixed allocation callback")
ORA-06512: at "SYS.KUPC$QUE_INT", line 431
ORA-06512: at "SYS.KUPC$QUE_INT", line 1544
ORA-06512: at "SYS.KUPC$QUE_INT", line 576
ORA-25254: time-out in LISTEN while waiting for a message
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3326
ORA-06512: at "SYS.DBMS_DATAPUMP", line 4551
ORA-06512: at line 1
UDE-04031: operation generated ORACLE error 4031
ORA-04031: unable to allocate 56 bytes of shared memory ("streams pool","unknown object","streams pool","fixed allocation callback")
ORA-06512: at "SYS.DBMS_DATAPUMP", line 4373
ORA-06512: at line 1
UDE-31623: operation generated ORACLE error 31623
ORA-31623: a job is not attached to this session via the specified handle
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3326
ORA-06512: at "SYS.DBMS_DATAPUMP", line 4551
ORA-06512: at line 1
Thanks,
J

SQL> show parameter MEMORY_MAX_TARGET;
NAME TYPE VALUE
memory_max_target big integer 0
SQL> SHOW PARAMETER SGA
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 768M
sga_target big integer 768M
SQL> SHOW PARAMETER PGA
NAME TYPE VALUE
pga_aggregate_target big integer 256M

Discoverer 10g error when scheduling a workbook using 2 calculations

Similar Messages

Maybe you are looking for