Errors when scheduling scenarios for agents using load balancing

Hi,
I have set up my ODI environment and have successfully manged to:
* run scenarios manually in development repository
* schedule scenarios and run on execution repository with one agent.
However when I try to set up a second agent to load balance the scenarios I get the following error below.
It seems to be a load balancing problem because I can run the scenario's successfully in every other case.
I am running an oracle RAC database. (2 servers, one oracle instance on each). I have set up one ODI agent on each server and I am trying to load balance between these 2 agents.
In topology I have set up 1 logical agent. Physical agent 1 is linked to itself and also to Physical Agent 2 under the load balancing tab.
For my scenario's I have 2 master scenarios (which are the ones scheduled) that call a number of other scenarios in the correct order.
Could anyone assist me please?
Thanks,
Matthew
Error:
====
java.lang.NullPointerException
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.E(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.a(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(Unknown Source)
     at com.sunopsis.dwg.tools.StartScen.actionExecute(Unknown Source)
     at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.y(Unknown Source)
     at com.sunopsis.dwg.cmd.e.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hi,
I'm wondering whether there may be a design flaw in the way our scenario's have been created / are executed.
Currently we have x number of scenarios executed by a x master scenario.
There are also y number of scenarios executed by a y master scenario.
These master scenarios are the ones scheduled against the agent and they call the "sub-scenarios".
We experience the above error when one of the "sub-scenarios" of a master scenario is executed on a different agent to where the master scenario is executed.
Any help greatly appreciated.
Thanks,
Matt

Similar Messages

Typedef Error when compiling niScope for DLL using CVI

I am getting the following error when trying to compile a DLL for the NI 5122 digitizer using CVI:
Error creating type library:
All structs, unions, and enums required by exported functions must be typedefs in order to create a type library. The struct/union/enum "niScope_wfmInfo" does not use such a typedef.
I have created a variable and "typedefed" it as niScope_wfmInfo to try and get rid of this error. This did not work. I have tried making several other changes. Some have eliminated the error but created problems with the DLL.
Has anyone had a similar error to this? If so, how did you get around it?
Thanks,
Heather

Hi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick

Error when scheduling infopackage for PA_PA OEMPLOYEE

hi all,
when iam scheduling info package for OEMPLOYEE it is giving error like "0EMPLOYEE : Overlapping time intervals of data record 298 with 305 : '['20040831'/'20040324'] '[to/from]     RSDMD 190 ".
iam unable to solve it.please help me in this issue.
thanx
Vamshi D Krishna

Hi,
This is a problem of time overlapping. As this is a master data, if for the same employee, the date overlaps then it will show you this error. Let me explain with example..
EID      Valid from      Valid to
1001    01.01.1000     10.01.2009
1001    08.01.2009     31.12.9999
In the above case, the dates for EID 1001 is overlapping. When you load this data, it will show you the dates are ovelapping.
So, first correct the data into the saource i.e. record number 298 with 305 and then upload again..
This will solve your problem...

Error when scheduling job for Job Control LO

Hi all,
I tried to schedule the job for collective update after I set the job parameter in tcode LBWE for LO Data Extraction. But they said 'Error generating job' without any description why.
Maybe you can help me about this since I still can't do the delta extraction for LO.
Thanks and appreciate for your help.
-Martin Darmawi-

Hi!
You have to pass two parameters for job control scheduling.In that you have traffic light for the respective parameters,defaulty those will appear in red.when you have specified parameters,both turns in to green.then you can say start.hope this will helps.....
Best Regards
Sunil.

How to handle error when importing taxonomy for product using XML?

We are on MDM 5.5 and built a repository for SAP R/3 Material Master. It has basic material information and taxonomy information as well. We built an import map based on an XML file, which includes basic info as well as taxonomy (classification) info. The import process runs smoothly. But if the import file includes some materials which characteristic values don't exist in MDM, the import will fail and exception file has a complete different format as our import file also it only display one material. Therefore, we cannot reprocess the exception file for errorred out items. What could we do wrong? By the way, we use "Create Pivot table" option in MDM to create the original import map.

Hi Micheal,
I Think your problem is similar to the below one,you can refer the below link for the same.
Import file using Pivot Tables
What you need to make sure is that you are using the same structure of the source file for importing as you used while creating the map else it wont work.
Your schema of the source file as well the schema used when creating the map must match.
You can refer the below links to know more about Taxonomy data importing:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aa1447-80a1-2a10-e483-a76087bcb12f
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6090d0bd-1da7-2a10-468f-bdd17badb396
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8090941f-a5a7-2a10-3ba6-b4af5ec6d97b
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/308c62a2-5faa-2a10-fda6-fa4aa7169734
Hope It Helped
Thanks & Regards
Simona Pinto

Error when create schemas for webcenter using URM.

Hi,
I use Oracle Urm to create necessary schemas for Webcenter. Everything goes well when I create the tables.
However, when I extend my domain with Webcenter, comes to the database connection testing step, the tests always fail.
It said: A connection is establish but no result received from the Test query.
I ignored the test but then later, start the WLS_Spaces manage server, the server can't start because of database error, the needed tables not found.
I use SQl Developer to connect to the database but can't see those newly created tables.
But during the URM step, nothing went wrong.
Can you help me with this?
Thank you very much.

Hi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi

Getting server error. CrystalEnterprise.Smtp: error when scheduled a webi report to save as excel and send to an email account. What things to look for?

yes you should read the administration documents,
go to CMC, find "servers"
then "destination job server"
then click the "destination " tab
you will find some parameters, you have to configure it you.
the same scenario will be done to the "web intelligence job server"
good luck
Amr

Using ACE for proxy server load balancing

Hello groups,
I wanted to know your experiences of using ACE for proxy server load balancing.
I want to load balance to a pool of proxy servers. Note: load-balancing should be based on the HTTP URL (i can't use source or dest. ip address) so that
a certain domain always gets "cached/forwarded" to the same proxy server. I don't really want to put matching
criteria in the configuration (such as /a* to S1, /b* to S2, /c* to S3,etc..), but have this hash calculated automatically.
Can the ACE compute its own hash based on the number of "online" proxy servers ? ie. when 4 servers are online, distribute domains between 1,2,3,4 evenly.
Should server 4 fail, recalculate hash so that the load of S4 gets distributed across the other 3 evenly. Also load-balancing domains of S1 ,S2 and S3 should not change if S4 fails.....
regards,
Geert

This is done with the following predictor command:
Scimitar1/Admin# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Scimitar1/Admin(config)# serverfarm Proxy
Scimitar1/Admin(config-sfarm-host)# predictor hash ?
address         Configure 'hash address' Predictor algorithms
content         Configure 'hash http content' Predictor algorithms
cookie          Configure 'hash cookie' Predictor algorithms
header          Configure 'hash header' Predictor algorithm
layer4-payload Configure 'hash layer4-payload' Predictor algorithms
url             Configure 'hash url' Predictor algorithm
Scimitar1/Admin(config-sfarm-host)# predictor hash url
It does hash the url and the result takes into account the number of active proxies dynamically.
This command has been designed for this kind of scenario that you describe.
Gilles.

Windows 7: Service unknown when using load balancing group

I try to run SAP GUI 7.10 on Windows 7. I use a load balancing group to connect to the server. The direct access to one of our cluster nodes works ok, but when clicking the link to the load balancing group says "load balancing error on logon 88: connection to messaging server not possible (rc=9)" (translated from german).
What is happening here? It works good on Windows XP. Do I have to use another saplogon.ini or something?
Thanks for any help!

Is it ok to deactivate UAC in a company?
That's something your M$ group must decide.
It sounds like a good security feature but as we see here it´s a pain in the @$$ for administrators...
Well - the purpose of it is to disable the ability of malware and virusses spreading around. I consider it as a security breach if a local user is able to simply copy files to the operating systems main directory. A user working with a frontend PC should not have local administrator rights at all; all software requiring this badly designed.
If you use the SAPGUI installation server you can distribute services, saplogon.ini etc. using the installation server provided service without the need of users having to have local administration rights:
Note 512040 - Distributing "services", "saplogon.ini", and similar files.
I just think that "administrators" must learn to do work properly as designed with operating systems without just "copying files around" in system directories (and I don't exclude me in that context).
Markus

Ent-06972 Error When Displaying BIBeans for Dimension Dataviewer

dear all,
I have problem when trying to view data on dimension with dataviewer in OWB 11g. it's no problem when i load small amount of data, but when i load huge amount of data i've got error message "ent-06972 Error When Displaying BIBeans for Dimension Dataviewer ". is it some kind of bug in OWB?

I am also getting the same error, using 11g.

Error when defining successor for node 0000000198

Hello ,
We are using leave request service on ESS portal.
From last few days we are getting error like " Error when defining successor for node 0000000198 "
All agents are assigned properly and also v have checked PFTC setting for Workflow.
the method which are using is Synchrounous.
this error is nt coming perticulary for one employee but it is coming for sick leave workflow.
Please help
thanks

Hi,
This is a binding issue between the workflow container and the task
container because we can see the text in the workflow container but
it is empty in the task container.
Our proposed solution is to go into the Dev or QAS environment and
regenerate the binding between the workflow and this particular task.
We will test and if this works, this will resolve issue.

Error when loggong on for external ID "": Error during SAML 2.0 logon

Hi,
I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
N SAML20 SP (client 400): Incoming Response
N SAML20 Binding: POST
N SAML20 IdP Name: http://xxxxxx/adfs/services/trust
N SAML20 Status Code: urn:oasis:names:tc:SAML:2.0:status:Responder
N SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
N SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
N *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c 16519]
N {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
N *** ERROR => SAML-Trace: Returncode = 222 [sign.c 16519]
N *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c 16519]
N *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c 16519]
I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
I have added the identity provider through transaction SAML2, but it does not seem to be working.
Here is a decrypted SAML assertion:
<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
Version="2.0"
IssueInstant="2015-04-02T00:21:06.477Z"
Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
>
<Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
<ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
<ds:Transforms>
<ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</ds:Transforms>
<ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
<ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>xxxxxxx</ds:SignatureValue>
<KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
<ds:X509Data>
<ds:X509Certificate>MIIFPjCCBCagAwIBAgIHAMFKH58TFzANBgkqhkiG9w0BAQsFADCBtDELMAkGA1UEBhMCVVMxEDAOBgNVBAgTB0FyaXpvbmExEzARBgNVBAcTClNjb3R0c2RhbGUxGjAYBgNVBAoTEUdvRGFkZHkuY29tLCBJbmMuMS0wKwYDVQQLEyRodHRwOi8vY2VydHMuZ29kYWRkeS5jb20vcmVwb3NpdG9yeS8xMzAxBgNVBAMTKkdvIERhZGR5IFNlY3VyZSBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkgLSBHMjAeFw0xNDAxMjMxOTM3MThaFw0xNzAxMjMxOTM3MThaMEIxITAfBgNVBAsTGERvbWFpbiBDb250cm9sIFZhbGlkYXRlZDEdMBsGA1UEAxMUZnNwcm94eTItZGV2LmlndC5jb20wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDAM13/bboldFRmDGK3QBbxlDREoGuQEUWeroZCDM/tH7Rk+AjgXbc4pkon13EwKi7q9brzkBMCY3HH9Ep2BUHjopydy+AWQH9vjLK2wXD/+6T4FCG1i8Kt+lRrcxRWUugnBuK+BRgxEJDz7ap8KvcRk6ERWQrx5Co8K7ey5nEqjapCDJQg3Yrkxo2pEWGBKSIXXmpU+CgK03y4HOW19/rmdcyLThjchn+Jgxe8obL4tiVk4D/X36wOqtV/1cnIjGak/px/p1oQEGD5PC7F3FIZConhUu7PJDLmioqdGcimZvFiZK6xQJyzy90lm0dHRT1qhkC9TTsGvAAMCh/gn41xAgMBAAGjggHEMIIBwDAPBgNVHRMBAf8EBTADAQEAMB0GA1UdJQQWMBQGCCsGAQUFBwMBBggrBgEFBQcDAjAOBgNVHQ8BAf8EBAMCBaAwNgYDVR0fBC8wLTAroCmgJ4YlaHR0cDovL2NybC5nb2RhZGR5LmNvbS9nZGlnMnMxLTExLmNybDBTBgNVHSAETDBKMEgGC2CGSAGG/W0BBxcBMDkwNwYIKwYBBQUHAgEWK2h0dHA6Ly9jZXJ0aWZpY2F0ZXMuZ29kYWRkeS5jb20vcmVwb3NpdG9yeS8wdgYIKwYBBQUHAQEEajBoMCQGCCsGAQUFBzABhhhodHRwOi8vb2NzcC5nb2RhZGR5LmNvbS8wQAYIKwYBBQUHMAKGNGh0dHA6Ly9jZXJ0aWZpY2F0ZXMuZ29kYWRkeS5jb20vcmVwb3NpdG9yeS9nZGlnMi5jcnQwHwYDVR0jBBgwFoAUQMK9J47MNIMwojPX+2yz8LQsgM4wOQYDVR0RBDIwMIIUZnNwcm94eTItZGV2LmlndC5jb22CGHd3dy5mc3Byb3h5Mi1kZXYuaWd0LmNvbTAdBgNVHQ4EFgQUMRTW5O0fpR4kET2ED84QAS6ZXBowDQYJKoZIhvcNAQELBQADggEBAKCQfnSSA1gs6qyYKqAqQKhhRRhC4wMtZJLZUmMGPe2q+QM4dQxJgrFy2OVG6I4dXFrxINGlPdJVVXBKtLn9Fm2t0Cb8lAV3rLruEfRJTDK6MeDFOD5qXgU4higpuDGrAmqKvMIOk7VJA0gPbW4lasgqGQXzOspZCmCIWwOqcIDZRr0wo09QLidegr/phjZMzuy8IO0U1w7U6MX767qcl3RGcqRwpquMtMiaw5ROx9v3DK3JOemlqQwKy/uzzBohzYln6AYim8cnZMvfaKDLYNwE0+Rg6nmemlf6PXOjE3Uisc71v3uFstWsXzUPhDeQlycFzPDT4t4srIaxdMrEs3w=</ds:X509Certificate>
</ds:X509Data>
</KeyInfo>
</ds:Signature>
<samlp:Status>
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
<samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
</samlp:StatusCode>
</samlp:Status>
</samlp:Response>

Hi Brian,
I am not sure but you could check below thread and couple of sap note.
Single Sign On - Sharepoint 2010 to SAP using ADFS
1799402 - Automatic account creation for SAML 2.0 SP
1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
It may help you to resolve / identify the cause of the issue.
BR
AKJ

Keep getting this error when ever I try to use the CC_2014

keep getting this error when ever I try to use the CC_2014 InDesign
Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders. Ensure that you have appropriate permissions and then restart Adobe InDesign.
Also have Ai quit out on me in the CC_2014.
This is very frustration since I use these the most

For MAC try to give permissions to Adobe Indesign Folder:
Users/[user]/Library/Caches/Adobe InDesign
Users/[user]/Library/Preferences/Adobe InDesign
Access hidden user library files | Mac OS 10.7 and later
For Windows try to give permissions to Adobe Indesign Folder:
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
C:\Users\[username]\AppData\Roaming\Adobe\InDesign
Also you can try logging in under a local administrator account as suggested by jeff.

Errors when scheduling scenarios for agents using load balancing

Similar Messages

Maybe you are looking for