Discoverer Desktop 4.1.37 not available

http://download.oracle.com/otn/nt/discoverer/A91493-01.zip downloads Discoverer Plus, not Discoverer Desktop. Where can I get Discoverer Desktop?

Hi,
Firstly, Desktop 4.1.37 is not a good version. You should upgrade to Desktop 4.1.48.
You should check the regional and language settings in the control panel. It will need to be changed to display different characters sets.
Rod West

Similar Messages

Views not available in Discoverer Plus

Hi Gurus,
I have created some views using Oracle 10 g Disco Admin v 9.0.4 and I am able to access them from Disco Desktop v 9.0.4
However, when I log in to Discoverer Plus, those views are not available. I am logging with the same user id that I am using for desktop. Some of the users who are on the previous version of Disco Desktop are facing the same problem. First I thought it might be a version mismatch issue, but now it is happening with Disco Plus too.
Here is the Disco Plus version details:
Oracle Application Server Discoverer 10g (9.0.4.00.00)
Oracle Application Server Discoverer Plus 10g (9.0.4.45.02)
Discoverer Model - 9.0.4.45.02
Discoverer Server - 9.0.4.45.02
End User Layer - 5.0.2.0.0.0
End User Layer Library - 9.0.4.45.02
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
Copyright © 1999, 2004, Oracle. All rights reserved.
Thanks in advance.

Hi Jagan,
Thanks for your reply and I have just transported the Role after the views have been assigned to it.
I'll update you once the Role is moved to Quality.
Regards
BN

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Aperture library not available as desktop or screensaver option

Aperture library is not available as desktop or screensaver option. Nor is it available in Fotomagico. Any ideas?

Go into "System Preferences" -> "Desktop & Screensaver" -> "Desktop"
Scroll down the list on the left. The top categories should be the Apple default desktop images that came with Snow Leopard. Below that you should see iPhoto and it's events, albums, etc. Below that you should see Aperture with your projects listed below that.
Do you at least see the projects listed or does Aperture not even appear? Or is the problem that you aren't able to select any of the images from a project?
If the latter I'm wondering if you're missing previews. You might go into "Aperture" -> "Preferences..." and pick the "Previews" category. Make sure the check boxes are selected for "New projects automatically generate previews" and "Use embedded JPEG from camera when possible" (if your camera shoots in RAW+JPEG mode then it'll use the JPEGs from the camera as the preview instead of building it's own.)
You can force it to update previews but note that since it normally wants to generate previews automatically the 'Update Preview(s)' isn't a global function... it only rebuilds the previews for images you have selected (which means you have to go into each project, select all images, and do a "Photos" -> "Update Previews"
Beyond this, you'd probably need to run Aperture first-aid to determine if there is some corruption in the Aperture library preventing it from being used.

I am not able to see the Business area in Discoverer desktop

Hi,
r
I am new to Discoverer
I have created a business area in EUL with user name and password as dewip/dewip in Discoverer administrator and now when I am logging in to Discoverer Desktop with the same user name and password to create workbook I am able to log in but I am not able to find the Business area in the Discoverer desktop.
After creating the business area do we need to do anything ( We don't even have save option to save also).
In Discoverer admin -> tools-> privilages I checked to see the privilages for this user ,but I could not see this user name(dewip) only.
Please help me ,its urgent.
Thanks,
gsr

Hi gsr
If you are working on Desktop and you change the default EUL but it doesn't stick this means that you don't have Admin rights over your machine.
In order to make these setting stick you need to have permission to update the system registry.
If you really cannot be given these rights then I suggest you ask you system admin to change the registry setting for you on your machine so that it reflects the correct EUL. You will find it here:
1. From the Start button, use Run | regedit
2. Open your registry to display HKEY_CURRENT_USER | Software | Oracle | Discoverer 10
3. Expand the folder called Database
4. Inside here you will see one set of settings that begin with AEUL and another with UEL. The format is like this:
AEUL_username_database and UEUL_username_database
5. You should see the name of the default EUL in the column called Data
6. Right-click on the setting you want to change and from the pop-up select Modify
7. Type the name of the EUL that Desktop should default to for that user in the database, making sure you type it in UPPERCASE
8. Click the OK button
9. Close the registry
When you now connect to Discoverer Desktop you should be in the correct EUL.
Note: this is only required if you don't have admin rights on your PC. If you do have admin rights then Discoverer will set this for itself.
By the way, if you or anyone reading this is unsure about manually editing your registry you should back it up first. Here are the steps:
To backup your registry, follow this workflow:
1. From your PC, click Start | Run
2. In the Run dialog box, type "regedit" and press the Enter key
3. The registry will now be displayed
4. From the registry menu bar, select Registry | Export Registry File
5. When the Export Registry File dialog box opens, give a name to the file you want the registry to be saved as
6. In Export Range, check "All" or "Selected Branch" - Selected Branch will export the current folder, so if you happen to have already navigated down tp the appropriate Discoverer Administrator folder you will be able to back it up
7. Click the Save button
8. Close the registry editor
To restore your registry, follow this workflow:
1. From your PC, click Start | Run
2. In the Run dialog box, type "regedit" and press the Enter key
3. The registry will now be displayed
4. From the registry menu bar, select Registry | Import Registry File
5. Navigate to the folder in which your registry is saved and locate the file
6. Click the Open button - the registry will be restored
7. Close the registry editor
Best wishes
Michael

Can't convert desktop to template because it's not 'available'

I have a desktop that I want to convert to a template. When I try I get this error:
"Unable to Convert Desktop to Template
Could not convert desktop 'test' to a template. The desktop state must be Available and the machine state must the Powered Off to convert a desktop to a template."
The desktop is powered off, but it's status says idle. Does anybody know how I force it to change to 'available'.
Thanks

Hi,
Is the desktop still assigned to the user?
It may also be depend on how the desktop was connected.If the desktop is personally assigned to a user it will remain idle after power off/log out. To make it 'available' again you may want to remove the assignment.
In case the assignment is flexible(i.e. the pool is assigned to the user) , Desktop will get recycled after the idle timeout is reached and will become available again.
Regards,
--Chirag

Wireless Synchronization in Desktop contact list properties is by default showing "Not Available", Not able to change also

In my Blackberry 8520 - Curve model, Wireless Synchronization in Desktop contact list properties (Go to Contacts, select options, select Desktop) is by default showing "Not Available" and not allowing to change also. My other colleagues are having the options.
My basic issue is that Outlook contact details are not getting syncronized with Blackberry. I believe this is the root cause for the same. Please guide to resolve the issue.
with best regards,

Hey pratiktnm,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Are you setup on a BlackBerry Enterprise Server? With the Desktop service book appearing it seems you were on one. If you are still on a BlackBerry Enterprise Server, I would suggest creating a full backup with BlackBerry Desktop Software: www.blackberry.com/btsc/KB33505
Then proceed with a security wipe by going to Options>Security>Security Wipe and then contact your network service provider to generate a new Enterprise Activation password. Then proceed with the enterprise activation by going to Options>Advanced Options>Enterprise Activation.
Once the activation is completed, test out the wireless synchronization of the contacts.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

My xp desktop thinks i/tunes is on a network resource that is not available, stops it being removed or upgraded,help

unable to remove or download i/tunes from XP desktop, the feture you are trying to remove is on a network resource that is not available plus my computer thinks the i/phone is a scanner or camera. can anyone tell me how to delete i/tunes so i can re-install ?

This problem can usually be fixed with the Microsft Installer cleanup utility.
Unfortunately the Microsoft Installer Cleanup utility has been withdrawn by Microsoft because of compatibility issues with Microsoft Office so you will need to find a copy elsewhere – the installer is msicuu2.exe. You need version 3.
Google msicuu2.exe download
mydigitallife or MajorGeeks in the above search have a copy of version 3
Check for malware before installing it.
Download a fresh copy of iTunes
http://www.apple.com/itunes/download/
Save the file on your PC.
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista/Windows 7
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
If you get permission denied error, Try Run as Administrator – an option if you right click on the program.
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did *not* uninstall, look out for entries that start All Users that are blank entries or have numeric entries that look like version numbers
restart your PC and try installing iTunes

HT5858 how do i manage syncing to allow to merge or sync to iTunes or sync to iPad? i have a lot of music in my iPad which when i iwant to sync with iTunes in the desktop that will be erased as it is not available in my iTunes music file.

how do i manage syncing to allow to merge or sync to iTunes or sync to iPad? i have a lot of music in my iPad which when i iwant to sync with iTunes in the desktop that will be erased as it is not available in my iTunes music file?

is there any important stuff saved to your emails? if so you could log on to your emails from a seperate device and back them up. im not sure what else you could do :/

Reconcile email messages option not available in Desktop Manager

I recently installed the Desktop Manager in an attempt to sync my new Tour with Outlook 07. After going through the install process, I went to the Synchronize option in the desktop manager and the reconcile email messages option is greyed out. I have a home office and do not have a BB Enterprise Server. In fact, there is not even an Email Settings icon available to me in the Main Menu of the desktop manager.  Any thoughts on how to enable this option? Thanks

That function is not available on a personal BIS account.
You'll need a BES account for email and messages reconcile, to Outlook.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Catigory for HP p2 1334 not available - it is not a NB or a desktop

Help
catigory for HP p2 1334 not available - it is not a NB or a desktop
Retired

Hi:
If whatever HP device you have that is a p2 1334, you can find how to get to the support page for it by reading the info at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03754824&lc=en&cc=us&dlc=en

Discoverer Desktop Graphing Questions

I have several questions about the graphing tool in Discoverer Desktop:
1. I'm bringing in a customer id field which I convert with a to_char in the query from a numeric field. Most of them are 5-digit, but some are 4. I notice in the x-axis the customer id's appear only for the 5 digit id's, and for the 4-digit ones the identifier appears. i.e. if the 5th record has an id of 1508, instead of displaying 1508 it displays 5. Does anyone know how to correct this?
2. In the y-axis values, is it possible to display more than 5 decimal places? (We're dealing with very small percentages). When I try to enter 6 or higher as the decimal value in Options, it says invalid number.
3. When I open an existing workbook, it readjusts the y-axis scale to a max of 1, when I've set it to .0001. How I can I make this retain my scale values?
4. Is it possible to display the y-values in the graph area itself next to the plot points?
Thanks for any help!!!!

Hi paul,
Its a good idea to upgrade from 4i to 10g 4i is no more used by many and their are some issues or bugs with it.The latest version is 11g which has been released 1 week back.If not go with 10g version available.
1) Do all reports have to be stored on the database to allow them to be accessed by Plus or Viewer? Can only the 10G client version open files from a local hardrive or shared network drive?Yes they have to stored in the database so any ened user can access them from plus or viewer.
Can only one report be open at any given time with Plus or Viewer? In client it is possible to have 2 reports open at the same time to facilitate easier comparisons.Yes,if the reports are registered as different reports and if the end user has access to both the reports thn he can open and compare it OR if both reports are in same workbook as different sheets than its easy to view or compare.
NULL values are still showing the word "NULL" even though in Tools Options we have set it to show blank, existing reports are still using the NULL value.It should show blank,might be some problem.In discoverer 10g i think you will not find this issues.
Hope this helps you.
Best Wishes,
kranthi.

Report Layout difference in Discoverer Desktop and Discoverer Viewer

Hi,
A report was developed in Discoverer Desktop. It is having some 10 columns as data points. The summarized columns for those 10 columns are required. But only 3 columns should be displayed in Detailed Data Points. So we shrinked(brought together) all the unwanted columns keeping 3 datapoints displayed. Now it is working fine in the discovere Desktop. But when we open the same report in the Discoverer Viewer, all the 10 columns are displayed in the Detailed Data Points as well.
Thanks in Advance
Regards
Rakesh

hi Michael,
good morning..hope u had a good sleep.
as per your last thought y'day, even though i create a function for the sum of season values n select those columns into the report, those will not be shown as summarized columns on right hand side of the report. they will be shown as datapoints for every month in that selected season.
i think the only possible solution for like this report is to hide those unwanted columns. for this we have hidden checkbox option in tools->sort while developing. but this option is available only for tabular reports.
if u come up with any fresh solution for the fresh day...i am glad.
Thanks,
_Rakesh.

How to use Oracle OAB Fast Formulas in Discoverer-desktop [ for reporting]

Hi,
Can anyone tell me how to use a fast formula in discoverer-desktop [for reporting]. Currently, we have a disco-report that calcuates the 'monthly salary', but we don't want to use that. Instead, we have a custom fast-formula [xx_oab_monthly_salary] which has the conditions and calculations that we need.
I want to use that formula in discoverer-desktop directly and get the monthly-salary.. i.e., someone needs to create a folder under the business area and add it i believe.. the formula internally calls a function.
when i checked about this with my dba - he said, he can add the 'function', but not the formula. and i need to write the calculation part...
does anyone know how to add it...there shud a way right...
i do not have access to the technical-stuff here..
someone said ["you can wrap the FF_EXEC.run_formula call into your own pl/sql function and map this function into the EUL so that the formula can be called from a workbook.", but this talks about pl/sql-do we need pl/sql
for this].
also, someone else said [ some fast formulas need specific contexts to be set. Depending on whether the fast formula below the only fast formula that you want to recreate in Discoverer.
For a single formula, in general my recommendation is to recreate the fast formula instead of using the ff_exec call].
any quick answers greatly appreciate..
thx,

Hi,
That's right you need to develop the pl/sql function outside of Discoverer using a pl/sql tool or just SQL*plus. I haven't an example to hand, but can dig one up if you need it. Once you have the function developed you can map it into the EUL using Discoverer Administrator. It will then be available to Discoverer Desktop/Plus as a database function when creating calculations. So you can then just add the calculation to an existing or new report.
Alternatively, you can build the pl/sql function into a view and load the view into a new folder using Discoverer Admin.
Rod West

Cannot log in as an application user on Discoverer Desktop

Hi
I have Discoverer Desktop 4.1.37.00.0 on a laptop. When I try to log in as an application user, when in connect field I enter database name, I get the following error message:
ORA-12154:TNS:could not resolve service name
When instead of databse name I input connect string in tnsnames.ora file, I get another error message:
Unable to connect to Oracle Application Database:Invalid username/password
Please note that the checkbox 'oracle application user' is enabled while attempting to log in.
Secondly, in my Administration Edition in Tools>options>connections
the following settings have been done:
Connect to both standard and applications EULs
Gateway User Id (GWYUID)/Password : APPLSYSPUB/PUB
FNDNAM : APPS
Similar seetings have been done for the desktop.
Also note that I cannot even log in as a database user. The error message I receive is
'You do not have access to any End User Tables.'
The database user name I'm using to log in is the one who has created EUL(apps mode) and owns business areas in that EUL.
Can someone please guide me on this problem?
Regards,
Aparna

Hi
The solution to my problem was exactly the same: I needed to apply the patch 3201601.
This patch is available on http://metalink.oracle.com
While installing the version 4.1.48.06.00 on my laptop, as I have XP, I came across some DLL errors.
For this refer to the note 297750.1, DLL Copy Errors when Trying to Patch Discoverer Administrator/Desktop 4.1
The note is also available on the metalink.
Regards,
Aparna

Discoverer Desktop 4.1.37 not available

Similar Messages

Maybe you are looking for