Report Layout difference in Discoverer Desktop and Discoverer Viewer

Hi,
A report was developed in Discoverer Desktop. It is having some 10 columns as data points. The summarized columns for those 10 columns are required. But only 3 columns should be displayed in Detailed Data Points. So we shrinked(brought together) all the unwanted columns keeping 3 datapoints displayed. Now it is working fine in the discovere Desktop. But when we open the same report in the Discoverer Viewer, all the 10 columns are displayed in the Detailed Data Points as well.
Thanks in Advance
Regards
Rakesh

hi Michael,
good morning..hope u had a good sleep.
as per your last thought y'day, even though i create a function for the sum of season values n select those columns into the report, those will not be shown as summarized columns on right hand side of the report. they will be shown as datapoints for every month in that selected season.
i think the only possible solution for like this report is to hide those unwanted columns. for this we have hidden checkbox option in tools->sort while developing. but this option is available only for tabular reports.
if u come up with any fresh solution for the fresh day...i am glad.
Thanks,
_Rakesh.

Similar Messages

Discoverer Desktop and Discoverer Plus Data

Hi Everyone
I have a report when I run in Desktop I can see the data, but when I run in Plus I cannot see any data.
Any ideas what might cause this problem to occur?
Discoverer version is 10.1.2.3

Hi,
If your report was developed in Desktop then it should work fine in Plus. Although Plus does not support subqueries I doubt that is the problem. As Gareth said it is most likely it is a NLS language problem. Create a workbook which contains the userenv('LANG') to check that it returns US in both desktop and plus.
If the NLS language is not the problem then post details of your custom query as there are differences between Plus and Desktop which could cause this problem.
Rod West

Installation Trouble with Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0

Hi All,
I'm having installing this software on my Window's 8.1 64-bit machine. I'm going to Disk1 > Install > Win64 > setup.exe. The Oracle Universal Installer shows up, passes the swap space and monitor checks, and stays on "Preparing to launch Oracle Universal Installer from C:\Users etc.... Please wait ..." for a few seconds. It then promptly closes and does absolutely nothing. I've tried the setup.exe from the Win32 bit folder, and that opens perfectly fine (unfortunately mines 64-bit). I've tried running as Administrator, in compatibility mode (all of them), and even updated Java. Does anyone know of a solution?
Also, I have a 32-bit Windows XP virtual machine installed, and when I tried it there, I encountered the same problem. This time with the 32-bit setup.exe.
Thanks,
Neville

Try
https://hostname:8090/discoverer/viewer
https://hostname:8090/discoverer/plus

Discoverer Desktop and Administrator: which is the next step?

Hello everybody, i would like to ask you some help about understanding the following issue:
I noticed that Discoverer Desktop and administrator are being treated like obsolete.
Do they have a direct successor? I mean, is there any new product that has more or less the same functionality and the same philosophy?
I'm looking at the Business intelligence suite but it seems to be a bit much wide for my scope.
Thank you all in advance.

So, in a way you are saying that discoverer is still better than any other oracle products including discoverer plus. I mean, discoverer adm and desktop are useful for me since
they are standalone application and the understructure is quite light ( for example you don't need any application server behind like plus does but just an EUL).
And i'm agree with your parallel matching with sqlplus situation. I still prefer doing something with sqlplus since is more reliable and quick than sqldeveloper. But i cannot say that
discoverer desktop is the most reliable tool for reporting. In 6 months i used i found out many bugs and many strange behaviors that made me a bit crazy about this tool. I also tried discoverer plus but i found it extremely slow and unreliable. The level of productivity is something ugly, not just slow. So far indeed desktop seems to be the fastest and most reliable solution for a "quick" reporting development.
I would like to ask you another question: has the new hyperion platform some reporting tool like discoverer?
I mean if discoverer is the reporting tool for Relational OLAP what about the reporting for Multidimensional OLAP?
Thanks again.
Best regards

Difference between v$option and dba_registry views ??

Hello all,
Whats the difference between v$option and dba_registry views.
SQL> select * from v$option ;
PARAMETER VALUE
Partitioning TRUE
Objects TRUE
Real Application Clusters FALSE
Advanced replication TRUE
Bit-mapped indexes TRUE
Parallel backup and recovery TRUE
Parallel execution TRUE
Parallel load TRUE
Point-in-time tablespace recovery TRUE
Fine-grained access control TRUE
Proxy authentication/authorization TRUE
...etc
47 rows selected
and
SQL> select comp_name from dba_registry;
Oracle9i Catalog Views
Oracle9i Packages and Types
2 rows selected.
Why the difference ??
TIA,
Jj
Message was edited by:
user566698
the DB is 9.2.0.7

DBA_REGISTRY displays information about the components loaded into the database
V$OPTION lists options that are installed with the Oracle server.
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96536/toc.htm
Regards
Acr

Launch Aurora in both desktop and modern views?

Is it possible to launch Aurora in both desktop and modern views simultaneously? When Aurora first introduced the modern view, launching from a taskbar shortcut on the Windows desktop still opened the desktop view, while launching from the Start screen tile launched the modern view.
Is this still possible?

The desktop and "Windows 8 Touch" (modern) app now share the same [[Profiles|profile]]. This means you now have access to the same bookmarks, history, saved passwords, etc. from both apps. However, because of a limitation of our profile system, you can't run both at the same time while they are sharing a profile.
However, you can run both at once if you first create a separate profile for each app:
# [[Use the Profile Manager to create and remove Firefox profiles|Start the profile manager]], create a profile named "desktop", then exit the Profile Manager.
# Create a [http://kb.mozillazine.org/Shortcut_to_a_specific_profile shortcut] to launch Firefox with these command line arguments: -P desktop -no-remote
# Use the shortcut to launch Firefox using your "desktop" profile.
# Use the normal Firefox icon to launch a second copy of Firefox using your default profile.
# [[How do I set up Firefox Sync?|Set up Firefox Sync]] if you want the two profiles to have the same bookmarks and other data. (Treat the two profiles as two different "computers" while following the setup instructions.)
# In the default profile, use the "Relaunch in Windows 8 Touch" menu item to switch to the modern app.
I'm sorry this process is so complicated! We want to make it easier to use both applications at once, but we may need to make some very complicated changes to our code to make that possible, so it's not likely to happen quickly.
For more tips and documentation on working with profiles, see this community article about [http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox Using multiple profiles].

Difference between WITH CLAUSE and INLINNE VIEW.

Hi experts.
Can anyone explain me the diff. between WITH CLAUSE and INLINNE VIEW with some example.
Thanks in advance.

user10314274 wrote:
Hi experts.
Can anyone explain me the diff. between WITH CLAUSE and INLINNE VIEW with some example.Generally, they are the same thing with a few minor differences.
The WITH clause gives you a little more control on how the sub-queries are to be set up and used and allows the same subquery to be used multiple times without re-reading the data. Both simulate the functionality of views.
I feel the WITH clause provides better strucure and maintainablility.
The WITH clause aslo offesr two hints, INLINE and MATERIALIZE that can affect performance - both are used with the query in the IN clause. INLINE causes the subquery to be used as a subquery (inline view) while MATERIALIZE requests that the data be copied to a temporary table first. These hints are undocumented but are recognized by the user community.
Edited by: riedelme on Jan 20, 2010 6:32 AM

Report for Differences in Invoice Amount and PO Amount

Hello,
Is there any standard report available in SAP to compare the differences in PO Amount andd Actual Invoiced Amount against that PO?
Regards,
Rohit Garg

Hello,
Try report MC$4 - Vendor Analisis: Purchasing Values.
I personally find it very useful.
Hope this helps!
KR,
Severina

Report on difference between PO price and Material standard price

Hi,
We need a report on Purchase price difference, which is report showing Open PO price & Material standard price, if there is a price difference
This need to be run every day to avoid buyer changing price at PO level unless there is a valid reason
Similarly difference if any between Schedule agreement price & Material master standard price
Please help

Hi,
There is no standard report available for this.
You need to develop one.
Considering your requirement, it can be achieved with a query as well provided you do not need complex functionality out of the report.
Hope this helps.

Interesting Differences Between the iPad and Android Viewing Experience

Well, interesting to me, anyway.
Here's some things I've noticed:
Image Sequence
The Android is the clear winner here, as the image sequence doesn't spin out of control when you lift up your finger like it does on the iPad. In fact, the viewing experience on the iPad is truly wretched and I've had to add notes under the view window telling people to keep their finger on the image when swiping in order to maintain control. I was getting complaints. Adobe, what's the issue here? Can the iPad viewer be brought under control?
Reset the entire Folio to the top-most page of every article
Tapping 3 times on the folio name in the viewer will reset each article to the top-most page with viewing on the iPad. Android? No such luck. Bit of a pain, that.
InLine Video
I realize this isn't a feature for Android yet, but it truly can't get here fast enough. Ouch. Pressing on the main Android menu back button twice (fast) will exit the fullscreen video and get you back to the page, but still.... Eeew.
Reset Entire Folio After Folio Update
With the iPad, after a folio update the entire thing is reset to the cover page. With Android, it stays where you left off. Not saying one is better than the other, but we sure do need a main FOLIO RESET button somewhere. And bookmarks. lol.
No Folio Instruction Sheet on Android
I know that Apple requires some sort of content to be contained within an app before approval, but not having that folio on the Android sure is nice. Again, wonder if there's a way to just write some code into the viewer to fool iTunes?
Installing after download
I'd say it's twice as fast on the iPad vs the Android. I've got a Xoom, but this is probably an app issue more than an OS or hardware issue. ?
Anyone noticed something else?

iPad charger is 2amps.
iPhone is 1 amp.
The iPhone charger will charge the iPad, but at a slower rate.

Video quality and size difference between clip preview and project view

Hey, Just want the video to look the same in project view as it does in clip preview. Video in project view is in widescreen mode and quality isn't as good. When i use the effects tool to fit the video to the screen the quality looks horrible.
Clip is 1920x1080
Thank you

http://forums.adobe.com/message/3804341#3804341

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Install discoverer admin and desktop

Hi All,
We have already installed discoverer 11.1.1.4 on linux. We have two url one for discoverer viewer and other for discoverer plus.
Now i need to generate a resport do i need to install discoverer admin and desktop.
I am new to discoverer Do i need to install discoverer admin and desktop separately or else we can use the same setup.
Please help.
My env details .
OS : OEL 5
Apps: EBS 12.1.3
db verion : 11.2.0.3
Discoverer version : 11.1.1.4
Thanks and Regards,

Hi,
You need to install Disco Admin to create and maintain an EUL. Discoverer Administrator and Desktop are part of the same installation and you should always install both. The software download is available from the Oracle Discoverer 11g Fusion Middleware (http://www.oracle.com/technetwork/developer-tools/discoverer/downloads/index.html). You install Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0 onto Microsoft Windows.
Rod West

Installer of Desktop and Administrator 11g for x64

Anybody knows if there are any plans to release an x64 installer for Discoverer Desktop and Discoverer Administrator(11g).
Edited by: user5629916 on 30-jun-2010 9:40

Hi
I have done some more investigation on your behalf and would like to point you to Oracle Support note *233047.1*. Here's the link to the website: https://support.oracle.com/CSP/ui/flash.html
In there are several useful questions and answers about Discoverer. The one that will be of interest in your situation is this one:
Q: Are Discoverer 11g Administrator and Desktop certified to install on 64-bit Windows clients?
A: No, at the time of this posting, the certification spreadsheet specifically only lists 32-bit Windows clients (XP, Vista, 7). At this time certification with Windows 64-bit client operating systems is being evaluated for a future patch set, post patchset 3. This document will be updated when the certification is announced.
If you try to install on Windows 64-bit operating systems, you will receive a warning like this when you run setup.exe from the /Disk1 directory.
You may workaround this by installing from ..\Disk1\install\win32 and running setup.exe from there; however, as stated at this point it is specifically not certified on 64bit Windows client operating systems; therefore, we cannot accept Service Requests for functional issues.
By the way, I did have one of my clients only yesterday successfully install Desktop and Administrator 11g onto Windows 7 64 bit. Here is one of their comments: I am running on Windows 7 64 bit. The 11.1.1.3.0 has both 32 bit and 64 bit available. It seems if you are running on 32 bit you would choose XP mode and the 64 bit by default compatible with Vista
Best wishes
Michael

USER UNABLE TO REFRESH DISCOVERER REPORT IN DISCOVERER DESKTOP 10g

Dear All,
HELP!!!
A new user is unable to refresh discoverer Reports in Desktop. All priviledges have been granted to username in Disco Admin and Usre is able to log into oracle Apps.
On the PC the user logged into someone else can log into Discoverer Desktop and run/refresh discoverer reports without any issues. Hence Ithink neither the PC nor the Discoverer installation is the problem.
Can anyone help? What setup/profile needs to be completed in order for the user to be able to run Disco reports.
Pls note that the following has been completed:
1. Business Areas Assigned to user and his responsibilities.
2. Desktop/Plus Privileges assigned.
3. Allow administration - DISABLED - NOT TICKED
Many thx
DI

Does this person just need to run reports? Or does this person also need to create reports? If the person just needs to run reports, try using Viewer for that person, rather than Desktop. This may be something that you need to log a service request with Oracle to get resolved. Pretty strange that can bring items into a new worksheet, but it won't run. Maybe there is an Oracle applications security issue (since logging in as another person does work)? You may be beating your brains out trying to find a Discoverer problem when it might be an application security problem. Though this is a wild guess on my part.
John Dickey

Report Layout difference in Discoverer Desktop and Discoverer Viewer

Similar Messages

Maybe you are looking for