Discoverer - IDL:DCCORBAException:1.0
Hi,
I am using discoverer 10g version (10.1.2.45.20), When we are running queries using plus / desktop we are getting IDL:DCCORBAException:1.0 exception.
We have page items on the report, initially data loads properly if once i select any of the page item i am getting this error
Please help me
Thanks
Mangamuri
Hi Mangamuri
Could be that Discoverer does not know which items to group within a Page Item. I've seen situation when All is selected that ths data is returned but when a single Page Item is selected an error is thrown. This is because the same item would logically be associated with 2 different page items, not very common I know but this was my cause.
To fix it I had to insert additional logic into my conditions to only pull items that would group into single page items. This is very hard to explain or reproduce but just a hint as to what the cause was in my situation.
Best wishes
Michael
Similar Messages
-
Discoverer Plus returning no data and IDL:DCCORBAException:1.0. Desktop OK
We are attempting to create a worksheet in Discoverer Plus. It is based on two tables joined with an outer join. We select 1 field from the master table, then 6 fields from the detail table. The query runs OK (we have no conditions, sorts, calculations nor totals).
When we attempt to add a 7th field from the detail table and run the query, Discoverer Plus displays the error message 'IDL:DCCORBAException:1.0' and the results region says 'No Data'.
If we build exactly the same worksheet with Discoverer Desktop against the same EUL, the query runs OK and returns the expected data. I've experienced this problem before and solved it by deleting the detail folder and re-creating it. (We are using custom folders). After this the query ran OK in Discoverer Plus and returned the expected data.
Has anyone else come across this? Do you know what causes it and/or any better method of solving it?I'm wondering if this has anything to do with the default position (and default aggregate) for the EUL folder item? I can see that some of the folders have number type items with default position 'Data Point' and others have these with default position of 'Top or Side'. I'm totally stabbing around in the dark here; looking at EUL folders which exhibit the problem and those which don't.
I've tried changing one field to 'Data Point' and it hasn't helped. Will try changing the join items now I think.
If anyone has any comments, would be v. grateful as I'm looking at dropping folders which have quite a bit of code around them and trying to re-create them exactly, which is a risky and horrible solution. -
Unable to connect Discoverer Server:IDL:DCCORBAException:1.0
Hi all,
I installed Discoverer 10 server on a machine called gnvmig.ote.gr and when I connect (from Discoverer Plus) to an Application EUL on the same machine I don't have any kind of problem. If I try to be connected to an Application EUL on another machine I have the following error:
Unable to connect Discoverer Server:IDL:DCCORBAException:1.0
I added inside the tnsnames.ora the connection string (to the other machine) and I enabled the trace....but inside the apps_trace.txt I don't any errors.
The strange thing is that the connection on the remote machine worked perfectly since yesterday....and now....nothing !!
The connection trace is the following:
=================STARTUP TIME= =================
PROCEDURE fnd.src.security.afscp.afscpinit: Begin(fndnam = APPS, gwyuid = APPLSYSPUB/PUB@uat01)
STATEMENT fnd.src.security.afscp.afscpinit: $Header: afscp.lc 115.25 2002/08/26 18:33:29 sdstratt ship $
PROCEDURE fnd.src.osd.afenv.usd_load_customfile: Begin(configname = nil)
PROCEDURE fnd.src.osd.afenv.usd_load_customfile: End: No config file specified
PROCEDURE fnd.src.security.afscp.afscpinit: End
PROCEDURE fnd.src.security.afscp.afscpsup: Begin
STATEMENT fnd.src.security.afscp.afscpsup: Username = ORACLE
PROCEDURE fnd.src.security.afscp.afscpsup: End: Success
PROCEDURE fnd.src.security.afscp.afscpcon: Begin
STATEMENT fnd.src.security.afscp.afscpcon: Connecting to gwyuid = APPLSYSPUB/PUB@uat01
STATEMENT fnd.src.security.afscp.afscpcon: New security pkg: Retrieving encrypted pwd
STATEMENT fnd.src.security.afscp.afscpcon: New security pkg success
STATEMENT fnd.src.security.afscp.afscpcon: Decrypting apps password
STATEMENT fnd.src.security.afscp.afscpcon: Closing gwyuid connection
STATEMENT fnd.src.security.afscp.afscpcon: Opening apps connection
STATEMENT fnd.src.security.afscp.afscpcon: No resp requested
PROCEDURE fnd.src.security.afscp.afscpcon: End: Success
PROCEDURE fnd.src.security.afscp.afscpfree: Begin
PROCEDURE fnd.src.security.afscp.afscpfree: End
PROCEDURE fnd.src.security.afscp.afscpinit: Begin(fndnam = APPS, gwyuid = APPLSYSPUB/PUB@uat01)
STATEMENT fnd.src.security.afscp.afscpinit: $Header: afscp.lc 115.25 2002/08/26 18:33:29 sdstratt ship $
PROCEDURE fnd.src.osd.afenv.usd_load_customfile: Begin(configname = nil)
PROCEDURE fnd.src.osd.afenv.usd_load_customfile: End: No config file specified
PROCEDURE fnd.src.security.afscp.afscpinit: End
PROCEDURE fnd.src.security.afscp.afscpsup: Begin
STATEMENT fnd.src.security.afscp.afscpsup: Username = ORACLE
PROCEDURE fnd.src.security.afscp.afscpsup: End: Success
PROCEDURE fnd.src.security.afscp.afscprsp: Begin(respkey = #521/#52767)
PROCEDURE fnd.src.security.afscp.afscprsp: End: Success
PROCEDURE fnd.src.security.afscp.afscpcon: Begin
STATEMENT fnd.src.security.afscp.afscpcon: Connecting to gwyuid = APPLSYSPUB/PUB@uat01
STATEMENT fnd.src.security.afscp.afscpcon: New security pkg: Retrieving encrypted pwd
STATEMENT fnd.src.security.afscp.afscpcon: New security pkg success
STATEMENT fnd.src.security.afscp.afscpcon: Decrypting apps password
STATEMENT fnd.src.security.afscp.afscpcon: Closing gwyuid connection
STATEMENT fnd.src.security.afscp.afscpcon: Opening apps connection
STATEMENT fnd.src.security.afscp.afscpcon: Get responsibility info
STATEMENT fnd.src.security.afscp.afscpcon: user_id = 3078, resp_type = I, resp_key = #52767 resp_id = 52767
STATEMENT fnd.src.security.afscp.afscpcon: appl_type = I, appsname = #521, appl_id = 521, secgrp =
STATEMENT fnd.src.security.afscp.afscpcon: Decrypting new oracle pwd for resp
STATEMENT fnd.src.security.afscp.afscpcon: Constructing connect string for resp
PROCEDURE fnd.src.security.afscp.afscpcon: End: Success
PROCEDURE fnd.src.security.afscp.afscpfree: Begin
PROCEDURE fnd.src.security.afscp.afscpfree: End
"apps_trace.txt" 407 lines, 28412 characters
PROCEDURE fnd.src.osd.afenv.usd_load_customfile: End: No config file specified
PROCEDURE fnd.src.security.afscp.afscpinit: End
PROCEDURE fnd.src.security.afscp.afscpsup: Begin
STATEMENT fnd.src.security.afscp.afscpsup: Username = ORACLE
PROCEDURE fnd.src.security.afscp.afscpsup: End: Success
PROCEDURE fnd.src.security.afscp.afscprsp: Begin(respkey = #521/#52767)
PROCEDURE fnd.src.security.afscp.afscprsp: End: Success
PROCEDURE fnd.src.security.afscp.afscpcon: Begin
STATEMENT fnd.src.security.afscp.afscpcon: Connecting to gwyuid = APPLSYSPUB/PUB@uat01
STATEMENT fnd.src.security.afscp.afscpcon: New security pkg: Retrieving encrypted pwd
STATEMENT fnd.src.security.afscp.afscpcon: New security pkg success
STATEMENT fnd.src.security.afscp.afscpcon: Decrypting apps password
STATEMENT fnd.src.security.afscp.afscpcon: Closing gwyuid connection
STATEMENT fnd.src.security.afscp.afscpcon: Opening apps connection
STATEMENT fnd.src.security.afscp.afscpcon: Get responsibility info
STATEMENT fnd.src.security.afscp.afscpcon: user_id = 3078, resp_type = I, resp_key = #52767 resp_id = 52767
STATEMENT fnd.src.security.afscp.afscpcon: appl_type = I, appsname = #521, appl_id = 521, secgrp =
STATEMENT fnd.src.security.afscp.afscpcon: Decrypting new oracle pwd for resp
STATEMENT fnd.src.security.afscp.afscpcon: Constructing connect string for resp
PROCEDURE fnd.src.security.afscp.afscpcon: End: Success
PROCEDURE fnd.src.security.afscp.afscpfree: Begin
PROCEDURE fnd.src.security.afscp.afscpfree: End
I want to underline that I didn't create a secure directory under the .../disco10g/discoverer path
Maybe should I create it and copy some .dbc files inside ?
But if the answer is 'YES', how did it work until yesterday ??? I have the suyspect that something has changed on the Application envinronment....
Any help will be appreciated
Thanks in advance
AlexIf you always get this error, then I don't know the answer. However, I see this message if I try to open a second Discoverer Plus session from the same browser session (either the same connection dialog, or on another tab of the same session). You can have multiple sessions of Discoverer , but they must be opened from completely separate browser sessions, or different browsers.
Scott -
Discoverer Plus - IDL:DCCORBAException:1.0
I have encountered error: IDL:DCCORBAException:1.0 when i'm trying to create a report in Discover Plus that has 3 parameter fields. If i put values in the 3 fields, the report will generate, however, if i put a value into only 1 of those fields and leave the other 2 parameters blank, this error occurs.
Please help me.Hi
Presumably the parameters are mandatory parameter? In this case you need to supply a value to all three. You cannot leave a mandatory parameter blank.
By the way, which version of Discoverer Plus are you using? You can use About | Help to see which version you have.
Best wishes
Michael -
IDL:DCCORBAException:1.0 when drilling
Hi guys,
I've got a data warehouse system using discoverer plus as a front end. At the moment it is in UAT. The tester has pointed out that when he drills down on certain reports, the gets the following error: IDL:DCCORBAException:1.0
However, when he restarts discoverer plus, the error goes away periodically.
What could be causing this?
Thanks in advance,
Chris.Hi Chris
You got a trainer and they are training on the video store tutorial? Wish I could get away with that! :-)
If the trainer is reporting that there were some java cache problems, this certainly isn't helping the overall situation. Did you happen to find out what he/she meant by a java cache problem?
Last year, I published some information about adjusting some of the Sun Java's settings. Here's a link: http://learndiscoverer.blogspot.com/2006/06/lost-or-grayed-out-icons-in-discoverer.html
I also now recommend that you have an absolute minimum of 1Gb of memory on the client PC. The optimum is 2Gb and I would definitely recommend that if you can do it.
I'm not 100% certain that altering the cache setting will definitely fix your issue but it is definitely a good place to start.
If you're willing to try altering the settings and then back to me, we can see where we are at that point.
Best wishes
Michael -
In Discoverer 10g (10.1.2) Discoverer Plus users are getting IDL:DCCORBAException:1.0 when they try query. An extensive search for this error has turned up nothing. Can anyone tell me what this error means and how to fix it?
Thanks.
Edited by: RA Riley on Oct 7, 2008 7:50 AMHi ,
my users are getting this error when they try to share a workbook . initially when they run a query they will get "an error occured when trying to run the query" . my verison is 9.0.4.45.3 .we are in the midway of upgrading to middleware 11g . but the present production is givng the problem .
this error started after a outage .where a datafile got corrupted and the discoverer scheduelr went offline . we have droped all the indexes(which are on EUL5 tables) and rebuilt again for the scheduler to work properly. from that day we are getting this error and it is for few users only . if i am able to run a report successfuly but other user cannot run the same report .
Do i need to rrefresh the EUL as we have made some changes to the database objects where the EUL is located .
this is a business critical issue . please let me know
Thanks
Naga -
Discoverer server connection error
Hi,
I am having a specific problem with web version of discoverer plus. Whenever I connect to discoverer plus and start working on it for few minutes I am losing connection to discoverer server. The exact error message what I am getting is "CONNECTION TO DISCOVERER SERVER IS LOST. PLEASE EXIT AND RESTART YOUR APPLICATION AND IF THE PROBLEM PERSISTS CONTACT YOUR ORACLE APPLICATION SERVER ADMINISTRATOR". When I look at the java console of the applet that is downloaded on my machine I see 'DiscoNetworkException' being thrown. Has anybody got any idea about why this is happening? if so, what do I need to do to prevent it from happening.
Thanks in advance,
Mythili.We have seen similar behavior on the product. We are running Discoverer Plus 10.1.2.48.18. The problem is reproducable if we have both a CASE statement and a Sort in a worksheet, then try to Save or view the SQL. I have seen the error that begins with "Error: DiscoNetworkException IDL:DCCORBAException:1.0", however, this error is occuring independent of the "dropped connection" error. We have seen it occur before the actual "dropped connection" error occurs. Also, if we only examine the SQL and don't save the worksheet, the error is displayed, but the connection remains intact (we can continue to work with the worksheet).
Don't know if this is helpful, but its what we're seeing. -
Cannot start Discoverer Viewer and Discoverer Plus on client.
I have installed Discoverer 9.0.2.39.0 on MS Windows 2000 server.
When I'm trying to start Discoverer Plus an error is occured:
DiscoServerException ??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????. - Nested exception: exception oracle.discoverer.corba.DCCORBAException {
oracle.discoverer.corba.EDCIConstant mErrorCode=kNoMessage,
java.lang.String mReason="??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????.",
java.lang.String mAdditionalInfo=" ",
oracle.discoverer.corba.DCIRow[] mEncodedInfo={}
exception oracle.discoverer.corba.DCCORBAException {
oracle.discoverer.corba.EDCIConstant mErrorCode=kNoMessage,
java.lang.String mReason="??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????.",
java.lang.String mAdditionalInfo=" ",
oracle.discoverer.corba.DCIRow[] mEncodedInfo={}
at oracle.disco.remote.corba.RMIToCorba.convertDiscovererServerException(RMIToCorba.java:165)
at oracle.disco.model.corbaserver.ModelInterface.SendReceiveData(ModelInterface.java:194)
at oracle.disco.model.corbaserver.serverrequest.DsrSetLocaleInfo.xmlUpdateServer(DsrSetLocaleInfo.java:84)
at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(DsrCorbaXML.java:39)
at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(DsrGeneralCorbaXML.java:162)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(ExecuteEngineImpl.java:200)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(ExecuteEngineImpl.java:124)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(SessionControllerImpl.java:686)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(SessionControllerImpl.java:450)
at oracle.disco.model.corbaserver.SessionImpl.setLocaleInfo(SessionImpl.java:417)
at oracle.discoiv.session.model.ModelSession.setSessionLocale(ModelSession.java:199)
at oracle.discoiv.session.model.ModelSession.(ModelSession.java:102)
at oracle.discoiv.session.model.ModelSessionManager.createSession(ModelSessionManager.java:54)
at oracle.discoiv.state.ConnectTransition.doTransition(ConnectTransition.java:33)
at oracle.discoiv.state.StateTransition.execute(StateTransition.java:37)
at oracle.discoiv.state.StateTransition.execute(StateTransition.java:46)
at oracle.discoiv.state.DiscoState.getState(DiscoState.java:155)
at oracle.discoiv.state.ConnectedState.getState(ConnectedState.java:90)
at oracle.discoiv.state.DiscoState.getState(DiscoState.java:52)
at oracle.discoiv.state.StateMachine.setState(StateMachine.java:75)
at oracle.discoiv.controller.DiscovererController.setState(DiscovererController.java:236)
at oracle.discoiv.servlet.DiscovererHttpHandler.processRequest(DiscovererHttpHandler.java:101)
at oracle.discoiv.servlet.DiscoServlet.doRequest(DiscoServlet.java:314)
at oracle.discoiv.servlet.DiscoServlet.doGet(DiscoServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
at oracle.plus.servlet.Disco4iProxyServlet.doRequest(Disco4iProxyServlet.java:141)
at oracle.plus.servlet.Disco4iProxyServlet.doGet(Disco4iProxyServlet.java:68)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
try to start from many clients. It was error too.Hi,
Were you able to find the solution to this problem? I have installed 9ias successfully. I could log to OEM and created a public connection but I cannot go to
http://hostname.domain:7779/discoverer/viewer
I get an error "Internal Server Error".
Any help is welcome
Vani -
Oracle 10g AS pacth for Oracle Apps 11i
Hi everyone,
I have installed Oracle 10g AS (10.1.2.0.2) for Oracle Business Intelligence on Sun Solaris 10 (64 bit) and integrated it with Oracle Apps 11i (11.5.10.2).
Everything seems fine but i am facing problems like
1) Toolbars not appearing correctly sometimes like it is disabled and enables by itself.
2)sometimes clients come accross "Connection with Server lost..." error while taking export (very few).
3) Its giving the error (mentioned at the end) only on one client machine while taking export to Excel.
I have tried installing Oracle 10g AS patch set 2 10.1.2.2 for Solaris but the problem persisits. Is patch set 2 compatible or certified with Oracle Apps 11i? if not then is there any other work around or do i have to wait for some new patch.
Thanx for your inputs.
Najeeb
Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\ASHIBEL
Proxy Configuration: Manual Configuration
Proxy: http=EMRPXY1:80,https=EMRPXY1:80,ftp=EMRPXY1:80,gopher=EMRPXY1:80
Proxy Overrides: emrpxy1:80,<local>
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Installed custom security manager
Could not assertPermission PermissionID.SYSTEM for IE
This can cause "Warning : Applet Window" to be displayed when running with IE
attempt 1: adding Protocol.protocol -> rmi
attempt 1: adding default Protocol.timeoutsecs -> 40
attempt 1: adding RMIProtocol.transport -> http
attempt 1: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 1: adding RMIProtocol.hijacksessionid -> 1
attempt 1: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 1: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
attempt 2: adding Protocol.protocol -> rmi
attempt 2: adding default Protocol.timeoutsecs -> 40
attempt 2: adding RMIProtocol.transport -> https
attempt 2: adding RMIProtocol.servletalias -> /discoverer/plus
attempt 2: adding RMIProtocol.hijacksessionid -> 1
attempt 2: adding RMIProtocol.httpsessionid -> jsessionid=0a43ce3430d605f5e434046d403ea5e9f219eb3784b7.e34QahyNbx0Ka40La3ySahuRbhmOe6fznA5Pp7ftolbGmkTy
attempt 2: adding default Protocol.codebase -> http://discoverer.emaar.ae:7777/disco/plus_files/
Discoverer Model - 10.1.2.48.18
New LOOKUP
Lookup Requested
Performing lookup RMI lookup: http://discoverer.emaar.ae:7777//discoverer/plus
Reading bytes from input stream
Unmarshalling response
Session ID:2007061817102717616
BI Beans Graph version [3.2.2.0.24]
BI Beans Graph version [3.2.2.0.24]
The export/print operation failed
Worker oracle.disco.publish.PublishData@6ffeb, command=ExportData failed with DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0 wrapping exception oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
Error: DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
DiscoNetworkException IDL:DCCORBAException:1.0 - Nested exception: oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
oracle.discoverer.corba.DCCORBAException: IDL:DCCORBAException:1.0
at oracle.disco.remote.corba.RMIToCorba.convertRemoteException(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface._handleGenericExceptions(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface.getBinaryData(Unknown Source)
at oracle.disco.model.corbaserver.ModelInterface.GetBinaryData(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrBinaryExport.xmlUpdateServer(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(Unknown Source)
at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.export.ExportInputStream._readBuffer(Unknown Source)
at oracle.disco.model.corbaserver.export.ExportInputStream.read(Unknown Source)
at java.io.InputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at oracle.disco.publish.PublishData._writeBinaryData(Unknown Source)
at oracle.disco.publish.PublishData._exportSheets(Unknown Source)
at oracle.disco.publish.PublishData.runDiscoWorker(Unknown Source)
at oracle.disco.worker.DiscoWorker.runWorker(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorker.run(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue._runWorker(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue.access$100(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._run(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext._runMaybeBlocked(Unknown Source)
at oracle.bali.ewt.worker.AbstractWorkerQueue$WorkerContext.run(Unknown Source)
at oracle.bali.ewt.worker.ThreadWorkerQueue$TaskAdapter.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.runTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler.processTask(Unknown Source)
at oracle.bali.share.thread.TaskScheduler$TaskQueue.run(Unknown Source)
at oracle.bali.share.thread.Timer.doRun(Unknown Source)
at oracle.bali.share.thread.Timer.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Hi
The last I heard is that 10.1.2.2 is not yet certified for use against E-Business Suite unless your operating system is Linux. Please take a look at this posting on Steven Chan's blog: http://blogs.oracle.com/schan/2007/04/23
The issues you are encountering, particularly the one with the toolbars disappearing, were fixed in patch 5345528 as described on my blog here: http://learndiscoverer.blogspot.com/2006/08/more-to-toolbar-icons-graying-out.html
I would advise you to go for this patch first until Oracle certify 10.1.2.2. for Sun.
Best wishes
Michael -
Discoverer reports taking a long time!!!
Hi all,
One of our clients is complaining that the discoverer reports are taking a long time to run for the last few days, the report used to take 30 minutes before but now is running for hours!!
I have checked the SGA and I have killed the idle sessions but still there was no improvement in the performance.
The version of BI discoverer is 10 and database also is 10g and the platform is win server 2003.
I have checked the forums and they talk about explain plan and tkprof and other commands, but my problem is that i am unable to find the query that discoverer is running i mean once the report is clicked the query runs and gives the estimate time it would take. can some one tell me where this query is stored so that i can check this query,
Also there were no changes made in the query or to the database.
The temp space fills up 100%, i increased the size of temp space but still it goes to 100% also i noticed that the CPU utilisation goes to 100%
i also increased the SGA but still no go.
can someone kindly help me as to what could be causing this problem
also kindly guide me to some good documents for tuning the discoverer.
thanks in advance,
regards,
Edited by: user10243788 on Jan 4, 2010 12:47 AMHi,
The fact that the report used to work fast and now not can be related to many things but my guess is that the database statistics were changed and so the explain plan has changed.
This can be done due to change in the volume of the data that crossed a level were oracle optimizer change the behavior but it can be other things as well.
Anyway it is not relevant since it will be easier to tune the SQL than to find what have changed.
In order to find whether the problem is with the discoverer or in the SQL extract the SQL as described above and run it in SQL tool (SQL Plus, TOAD, SQL Developer and so on).
The best way to get to the problem is run a trace on your session and then use the TKPROF command to translate it to a text file you can analyze - you can assist your DBA team they should have no problem doing that.
By doing that you will get the problematic statements/ functions/ procedures that the report uses.
From there you can start working on improving the performance.
Performance is expertise for itself so i'm sorry i don't know to tell you where to start from, I guess the start will be from understanding the meaning of the explain plan.
Hope I helped a little although I wish Ii had a magic answer for you
BTW, until you resolve that problem you can use the discoverer scheduler to run the reports in the background and so the users will get the data.
Tamir -
Oracle 10g Discoverer Reports & export to xls fails for large reports
Hi ,
We have following configurations:
1: RHEL 5.4
2: Discoverer :Version 10.1.2.48.18
3: Oracle10g Apps Version : Version 10.1.2.0.2
Issue:
Most of small reports works fine ....but when large discoverer reports are executed the page
keeps on refreshing for 15-20 hours but no output ....same for export to xls ......
But same reports works fine in oracle9i for same data voulme....
Observations:
When on linux with top command the processes are monitored its observed that discoverer process
dis51ws dies for large reports after 1-2 minutes ...& the page keeps on refreshing but no output....
for 1-2 minutes it consumes 50-80% cpu utilisation then process disappears & cpu 80% idle ...
It seems that as 10g Apps is installed on RHEL 5.4 ...non certfified OS causing an issue...
Can any one adds more inputs in this regards......
we have checked logs : below are log details :
Below logs gives "Logkeys: exceptions discoiv.servlet_exceptions" for this report ...
1:
OC4J~OC4J_BI_Forms~default_island~1:
10/04/11 12:11:29 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
10/04/11 12:11:59 Using oracle.reports.util.EnvironmentGlobal class
10/04/11 14:23:37 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:23:38 Discoverer Model - 10.1.2.48.18
Session ID:2010041114240115278
10/04/11 14:25:42 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:25:42 Discoverer Model - 10.1.2.48.18
Session ID:2010041114254315439
10/04/11 14:28:53 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:28:54 Discoverer Model - 10.1.2.48.18
Session ID:2010041114285615691
10/04/11 14:29:13 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:29:13 Discoverer Model - 10.1.2.48.18
Session ID:2010041114291315728
10/04/11 14:32:35 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:32:35 Discoverer Model - 10.1.2.48.18
Session ID:2010041114323615949
10/04/11 14:32:48 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:32:48 Discoverer Model - 10.1.2.48.18
Session ID:2010041114324815982
10/04/11 14:34:44 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:34:44 Discoverer Model - 10.1.2.48.18
Session ID:2010041114344616128
10/04/11 14:34:55 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:34:55 Discoverer Model - 10.1.2.48.18
Session ID:2010041114345516155
10/04/11 14:36:25 Tutalii: /oracle10gas/app/oracle10g/discoverer/lib/discoverer5.jar archive
2:
Discoverer~SessionServer~12
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Active Eul: EULADMIN
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
DCSCORBAInterface::Delete called
DCSCORBAInterface destructor called
DCSCORBAInterface::Delete called
DCSCORBAInterface destructor called
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
3:
application.log
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Finding async request action forward
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Calling externalize
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_TOOL: dvtb xk-1ml versionzw1.0w kyxdvtbyxbisltyxbicho vzwwjyxjbisltyxjdvtby
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_VIEW: dv xk-1ml versionzw1.0w kyxdv bazw0w cszw25wyxpc vzw1wjyxjdvy
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_VIEW: lc
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_HS: dvhs
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_DS: dv_ds &qls_z!2=New GL Report.Clndr Id&arq=false&qls_x!14=Sheet 1.Closing Balance (Credit)&qls_x!3=New GL Report.Voucher No&qls_z!3=New GL Report.Frm Prd&fm=xml&qls_z!4=New GL Report.To Prd&qls_x!2=New GL Report.Prd Desc&qls_x!11=Sheet 1.Debit Amount&qls_x!4=New GL Report.Gl Voucher No&qls_x!9=Sheet 1.Opening Balance Debit&tss_s!0=New GL Report.Acct Id,lh,group,false&qls_x!1=New GL Report.Acct Sdesc&qls_z!1=New GL Report.Loc Desc&qls_x!10=Sheet 1.Opening Balance (Credit)&qls_x!12=Sheet 1.Credit Amount&aow=false&qls_x!7=New GL Report.Shrt Code&qls_x!13=Sheet 1.Closing Balance (Debit)&qls_x!6=New GL Report.Pmt Rct Dt&qls_x!8=New GL Report.Dtl Nrtn&sss=true&qls_x!5=New GL Report.Voucher Dt&qls_x!0=New GL Report.Acct Id&qls_z!0=New GL Report.Loc Id&ddsver=1
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.ViewerModelImpl.externalize [EXTERN_STATE]: $wksht$%24dv_ds%24%26qls_z%212%3DNew+GL+Report.Clndr+Id%26arq%3Dfalse%26qls_x%2114%3DSheet+1.Closing+Balance+%28Credit%29%26qls_x%213%3DNew+GL+Report.Voucher+No%26qls_z%213%3DNew+GL+Report.Frm+Prd%26fm%3Dxml%26qls_z%214%3DNew+GL+Report.To+Prd%26qls_x%212%3DNew+GL+Report.Prd+Desc%26qls_x%2111%3DSheet+1.Debit+Amount%26qls_x%214%3DNew+GL+Report.Gl+Voucher+No%26qls_x%219%3DSheet+1.Opening+Balance+Debit%26tss_s%210%3DNew+GL+Report.Acct+Id%2Clh%2Cgroup%2Cfalse%26qls_x%211%3DNew+GL+Report.Acct+Sdesc%26qls_z%211%3DNew+GL+Report.Loc+Desc%26qls_x%2110%3DSheet+1.Opening+Balance+%28Credit%29%26qls_x%2112%3DSheet+1.Credit+Amount%26aow%3Dfalse%26qls_x%217%3DNew+GL+Report.Shrt+Code%26qls_x%2113%3DSheet+1.Closing+Balance+%28Debit%29%26qls_x%216%3DNew+GL+Report.Pmt+Rct+Dt%26qls_x%218%3DNew+GL+Report.Dtl+Nrtn%26sss%3Dtrue%26qls_x%215%3DNew+GL+Report.Voucher+Dt%26qls_x%210%3DNew+GL+Report.Acct+Id%26qls_z%210%3DNew+GL+Report.Loc+Id%26ddsver%3D1%24dv%24xk-1ml+versionzw1.0w+kyxdv+bazw0w+cszw25wyxpc+vzw1wjyxjdvy%24wd%24false%24lc%24%24dvtb%24xk-1ml+versionzw1.0w+kyxdvtbyxbisltyxbicho+vzwwjyxjbisltyxjdvtby%24wvs%241101%24dvhs%24$cn$&vct=svd&cnk=cf_a101$ap$%26df%3D%26l%3D%26s%3D%26nc%3D%26dl%3D$expl$&sp=&node=&event=focus&state=(117)&root=63&wbt=2$prid$NEW_GL_REPORT%2F31$ctyp$viewer
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Storing state
10/04/11 14:37:25 discoverer: [INFO] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Externalize Perf: 8ms
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving Attributes
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving ApplicationRequest
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Checking for SSO mode
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving errors, messages
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Returning final forward: "/ExportProgress.uix" redirect: "false"
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute ----------------------- End Request --------------------------
10/04/11 14:37:25 discoverer: [INFO] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Total Request Time in AppCtrl: 18
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] org.apache.struts.action.RequestProcessor.processForwardConfig processForwardConfig(ForwardConfig[name=long running operation,path=/ExportProgress.uix,redirect=false,contextRelative=false])
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.view.DiscovererPageBroker.isCacheable Setting cacheable to: true
4: XML log:
log2010041114285615691.xml
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>184</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer started.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>162</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="TRACE"></MSG_TYPE><MSG_LEVEL>5</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Return DCSModelInterface::SendReceiveData(kScheduleInterface, inTable, outTable)
outTable = DCITable
Length=0
]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcsmdli.cpp</FILE_NAME> <LINE_NUMBER>259</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[DCSModelInterface::SendReceiveData(kScheduleInterface)]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS </MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcsmdli.cpp</FILE_NAME> <LINE_NUMBER>226</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> <LOG_SIZE>0</LOG_SIZE> <EXTRA_INFO><MethodEnd duration="0.1" sizeChange="0" >
real 0m0.1s
user 0m0.900s
sys 0m0.109s
</MethodEnd></EXTRA_INFO> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:37:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer stopped.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>184</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:37:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:37:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer started.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>162</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:37:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
Regards,Hi ,
as per Note: 466697.1 ....its an memory error....& need to increase MaxVirtualDiskMem and MaxVirtualHeapMem
But we already have slowly increased MaxVirtualDiskMem and MaxVirtualHeapMem to below very high values ...but the issue remains same.......
as per note we are getting Logkeys: exceptions discoiv.servlet_exceptions error but
after that we are not getting below error ............
Unexpected error in state machine: java.lang.OutOfMemoryError
Hence I presume that its different issue rather than memmory....
Below are pref.txt values..........
CacheFlushPercentage = 25 # Percent of cache flushed if the cache is full. valid values 0 - 100%.
MaxVirtualDiskMem = 9294967296 # Maximum amount of disk memory allowed for the data cache. Should be greater than or equal to MaxVirtualHeapMem
MaxVirtualHeapMem = 4294967296 # Maximum amount of heap memory allowed for the data cache.
QueryBehavior = 0 # Action to take after opening a workbook (0 = Run Query Automatically, 1 = Don't Run Query, 2 = Ask for Confirmation)
Also we have raised an SR & as per SR .............all below settings are tried as per SR except for applying a recent patch....
====================================================================
Discoverer performance is largely determined by how well the database
has been designed and tuned for queries.
A well-designed database will perform significantly better than a poorly
designed database.
Workbook design can also affect query performance.
1. Apply latest Discoverer patch as documented in <<Note:237607.1>>
'ALERT: Required and Recommended Patch Levels For All Discoverer Version'.
2. Increase the maximum JVM heap memory:
In general, the default values for the minimum heap (-Xms) memory and
maximum heap (-Xmx) memory are sufficient.
However, if your organization consistently runs large Discoverer queries
then you may benefit from increasing the maximum heap memory from the
default values.
This is recomended if your users are typically running large queries via
Discoverer Viewer.
Increasing the JVM memory can help to avoid "java.lang.OutOfMemoryError"
in Discoverer Viewer:
Please see <<Note 563960.1>>, Best Practice: Configuring The
OC4J_BI_Forms JVM For
Discoverer Viewer/Portlet 10g Performance And Stability for specific
details.
3. Disable Query Prediction:
Query Prediction provides an estimate of the time required to retrieve
the information in a query.
The Query Prediction appears before the query and consumes time.
Edit the <oracle_home>/discoverer/util/pref.txt on the middle-tier
server and set:
QPPEnable=0
Also set:
QPPObtainCostMethod = 0
4. Uncheck the 'Enable fantrap detection' checkbox.
When the box is checked, every query generated by Discoverer is
interrogated. Discoverer will detect a fan trap and rewrite the query to
ensure that the aggregation is done at the correct level.
Please refer to <<Note:210553.1>>, Oracle BI Discoverer: Fan Trap
Resolution - Correct Results
Everytime for more information on fantraps.
To disable, in Plus go to Tools -> Options -> Advanced -> Fan Trap
settings.
In Viewer go to Preferences and uncheck the box.
5. Disable Materialized Views/Summaries
In pref.txt add parameter:
MaterializedViewRedirectionBehavior = 0
Value equal to 0 ensures that Materialized View (MV) Redirection is
always performed when MVs are available.
6. Improve query performance by optimizing the SQL.
In pref.txt modify/add following parameters:
SQLFlatten = 0
SQLItemTrim = 0
SQLJoinTrim = 0
UseOptimizerHints = 0
If value of SQLFlatten is 1 then Discoverer will merge inline views in
the query SQL where ever possible.
In case of SQLItemTrim, Discoverer will remove unused folder items from
the query SQL where possible and for SQLJoinTrim Discoverer will remove
unnecessary joins from the query where possible.
UseOptimizerHints will add Optimizer hints to SQL if set >
0.Unnecessarily making Discoverer perform these checks consumes
resources and rather than increasing the performance may reduce the same. So unless you feel these checks have to be performed depending on
requirements, assign zero to these parameters.
7. When Discoverer builds a query, Discoverer makes a database security
check to confirm that the user has access to the tables referenced in
the folders. Avoiding this check can save time.
So in pref.txt underDatabase section add:
ObjectsAlwaysAccessible = 1
8. Whenever you are creating conditions, ensure that you match the Case.
This in turn can reduce the time Discoverer spends on changing the Case
and matching.
For example:
option Upper(Department) in (Upper('VIDEO SALES')
9. Ensure that summaries are refreshed periodically in Discoverer
Administrator.
10. Increase the amount of memory available for the Discoverer data cache. Please refer to <<Note 245752.1>>, Explaining Oracle BI Discoverer
Session Memory Management
And Server Cache Settings.
11. Performance may be enhanced by enabling OracleAS Web Cache.
==================================================================
Thanks for your reply....................
Regards, -
DISCOVERER Plus connectivity issus
Encountering a connection issue when using DISCOVERER Plus. When attempting to refresh (using the refresh icon) after five-ten minutes of being idle, the message "Failed to connect to database" is received. Users then have to reconnect to DISCOVERER via the connection screen. I don't have any knowledge about disvocer. The platform is windows.
Your help will be appreciated. Thanks.Hi,
The first think you will want to check is the timout preference for Discoverer Plus.
It is located in <oracle_home/discoverer/util/pref.txt
Once you change it, you will need to run applpreferences.sh or applypfreferences.bat (for Windows) and the next sessions will pick up the change.
Discoverer Viewer timeout is in the web.xml file.. see the Discoverer Configuration Guide on OTN
http://www.oracle.com/technology/documentation/discoverer.html
Hope that helps.
Regards,
Steve -
Hi
We had a problem with the discoverer viewer, where the sessions wouldnt stop and reach the max level, so we used a patch 6155500 to kill the idle sessions, it was working fine for a couple of days but not its not working ...........................any advice regarding what might be the problem with the patch?
Thanks
Message was edited by:
thinkingeyeHello,
General advice, as we should have a look at logs to understand why it is happening, would be to monitor system resources and OracleAS Components. In example, it maybe that OC4J crashes causing discoverer session to be loosed and so not within OracleAS control.
You may want to check the following logs :
$OH/opmn/logs/ipm.log
$OH/opmn/logs/opmn.log
$OH/j2ee/OC4J_BI_Forms/application-deployments/discoverer/OC4J_BI_Forms_default_island_1
Hope this helps,
Best Regards,
Gianluca -
How to timeout a Discoverer session in Discoverer 4.1.48 Client-Server
Hi Comunnity,
My question is simple: Is it possible to establish a tiimeout to a Discoverer session, but not for the WEB sessions, but those sessions runned from the Client-Server Tier (using the Discoverer Desktop Edition).
We are using the 4.1.48 Discoverer Version, and we want to limit the time that the users are inactive with its sessions.
Thanks in advance for your answers.Hi Gianluca,
Sorry for answer this post so late, but now we have taking again this matter.
We have just created a profile:
create profile discoverer limit
sessions_per_user default
cpu_per_session default
cpu_per_call default
connect_time default
idle_time 5 (we put 5 minutes only to test)
logical_reads_per_session default
logical_reads_per_call default
compose_limit default
private_sga default;
commit;
As we do not know which values we have to put for all other parameters we left the DEFAULT value for this parameters. We are interested only in the IDEL_TIME parameter, in order to limit the idle tiime.
Then we assign this profile to an user (GENERAL), which is a databaser user and a Discoverer User, wit the following sentence:
alter user GENERAL profile discoverer;
commit;
In order that these changes will work, we alter the system with the following command or sentence:
alter system set resource_limit = true;
commit;
We have bounced the database, but it seems that the profile does not work, cause the user is still connected to the database, cause it can make new queries in discoverer.
Had we made anything wrong?
Thanks in advance.
Luis Enrique. -
Discoverer Plus - Kills the browser with error msg for session timeout
If left idle for more than few minutes, Discoverer Plus instance will kill itself with an error.
i guess it kills the IE browser instance with an error message when Session Timeout occurs. The problem is I have to re-login in a new IE browser.
Is this normal behavious, or a bug. Any workaround to stop this happen. Please can someone help me, we are going on for a production rollover very soon.
I appreciate your help.
Regards, BB,
The pref.txt file has session time out parameter that can be controlled. You can increase the time out value.
Regards
Maybe you are looking for
-
How do you change the text color in io7 from white to black?
How do you change the text color on the home page in iO7 from white to black? I tried to invert the color but that reverses everything inclufing pictures.
-
HT1560 What if Factory Restore doesn't work?
What if Factory Restore doesn't work?
-
Migration from Alpha/VMS/OracleRDB
I work on a major application for a site using Alpha hardware, VMS operating System and Oracle RDB database (Forte 3.0.N.1) I am interested in any experiences or plans anyone may have or be considering for migrating Forte applications from a similar
-
I've never had a problem connecting to my home network until recently. The desktop computer is connected, and my iphone connects as well. It is not a problem with the wireless router, but rather I believe with my computer or airport. How can I fix th
-
Hi...just throwing this out into the universe to see if it takes root. :o) It'd be nice if Spaces had a setting for "everything always on space #1 unless otherwise assigned". Just a suggestion. Spaces rawks!