Disk not found error

I keep getting this annoying pop up randomly and it takes 100 clicks to get it to go away. I uploaded all updates. What next? The old HP Deskjet I had had the same type of nonsense error messages. Won't buy another HP if this is not resolved! HELP! I have an officejet 6500.

Hello there.
I am having the problem as described in the first post and I followed your command to turn on the notebook, press F12 and boot from CD/DVD. After that, the RAMDISK is loading and then there is a "PLEASE WAIT" message and then my notebook suddenly turned off and turned on again without doing any recovery (just start normally in Windows). Do you have any ideas to help?
Thanks

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Hard disk Not found Error

My computer suddenly after working properly the day before, started displaying an error that says hard disk Not found. It is not booting up to windows aince the hard disk has been disconnected in some way. It is still under the hp manufacturers warranty till auguat of 2015, so would I be able to send it in for either a device replacement or a service order to correct the error. Also there is a small crack in the body near the charging port, but that is from a drop from eariler. Please get back to me as soon as possible, my son needs to use this for his computer science class.

You should contact HP directly to arrange to have the notebook sent in for warranty repair.
Use one of the contact options described in the web page at the following URL.
https://support.hp.com/us-en/contact-hp/product/HP-Pavilion-13-a000-x360-Convertible-PC/6936239/mode...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired. I erased the drive and restored system back to the previous day.

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?

Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Hard Disk - (3F0) BootDevice not found" Error Message how do i fix this

Hard Disk - (3F0) BootDevice not found" Error Message

Sounds like the hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance you have a 320GB hdd now so you could use a 500GB hdd but not a 250GB hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My iphone won't sync I keep getting an error that says disk not found????

help. My iphone will not sync with itunes. It keeps giving me an error message that says required disk not found?? I don't know what that means and I really need to transfer purchases and sync. I have an iphone 4 that is about 10 months old

What does the error message say EXACTLY?

FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
when this is extracted it leaves me with Disk1, 2, and 3
install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
i even triwd the same download from edelivery.oracle.com and gives the same madness
am stuck.

i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT.

IPod Classic 120GB cannot sync, "Required disk not found"

Somebody, please help! iPod Classic 120GB charcoal, current OS as of about a week ago (won't stay synced long enough for me to see what it is), iMac 24" 10.6.4, iTunes 10.0.1. Let me know if you need any more info and I'll try to provide it.
Everything was absolutely fine until I updated to the newest version of iTunes. Now, when I plug in my iPod, it says it's connecting then jumps straight to the "Okay to disconnect" screen. It never shows up in iTunes at all. After doing this repeatedly, I unplugged it then immediately plugged it in again before it had finished the progress bar on the "Okay to disconnect" screen, and it finally showed up in iTunes, but it gave me an error of "iPod was not properly disconnected" then "cannot sync - required disk not found" and disconnected itself again.
I tried resetting it (menu+center buttons) while it was plugged in, and this did nothing. iTunes still didn't recognize it at all.
About a week ago, I followed some instructions somewhere and toggled the "enable disk use" option (I usually keep it unchecked) then was able to restore it. The songs were added back in a bizarre order (not alphabetical, not chronological, songs within an album added out of order, jumping from artist to artist, etc.) and I had to sync it again for three random albums that it missed the first time, but once everything was in again it was fine. I haven't added any new songs or playlists to my iTunes library since then (just changed a few ratings and I like to keep track of play counts), but when I tried to sync it again this morning, I got exactly the same errors.
The only difference this time is that it alerted me that one song in my library (a song I happen to like very much) could not be synced. The song still shows up on my iPod, but will not play. It still appears and plays in iTunes on the computer.
The iPod works perfectly in day-to-day use and is a little over a year old. I take very good care of it (my previous iPod is four or five years old and still works fine) and it has never had any problems before this. It has almost 100GB worth of music (no other media, just music), which makes it pretty annoying to have to restore it more than absolutely necessary. What is going on here and is there some way to fix it that will last longer than a week?

Hi, yeah I'm experiencing the same issue as everyone else with a 120gb iPod classic using iTunes 10.1.1 (4). Started about the time of OSX 10.6.5 update and hasn't been resolved with the OSX 10.6.6 update.
iPod attempts to Sync but now quits without even appearing on the computer let alone iTunes.
I have ESET security but quitting the app doesn't help.
I also have an iPhone 3Gs and that's still syncing fine (thank heavens), via a different library.
I've since managed to wipe the iPod clean (back to factory settings) as forced to do so by following the instructions in another post to remove the iPod Photo Cache. I then moved my iTunes folder to another directory for safe keeping.
I set up a clean iTunes database thinking my old one might have been corrupted. To do this you open iTunes from scratch while holding down the option key and select "Create Library". iTunes then remembers the last library created whenever you open the app.
When I am able to see the iPod summary screen (a rare occurrence now) I see that "enable disk use" is checked ok - this has been noted as a problem in previous forums. So that's not the issue.
Actually the iPod doesn't even stay connected to my 2010 unibody MacBook Pro when the iPod is switched over to disc mode. It immediately goes into "OK to Disconnect".
So I now have a clean iPod, and clean iTunes - all empty and essentially useless!
Anybody out there with any ideas? Plllleeeeeeeese?

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes. I have done that. It is listed in my progra

I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Why do I get a boot drive not found error only when laptop lid has been closed?

I've got a HP Mini 210 P/Number: VX818EA with Windows 7 Starter.
It works fine when turning on after shutdown, but when I've put it to sleep by closing the lid it won't 'wake up', and I get a blank screen. On restarting the computer I get a 'boot drive not found' error, (3F0) which can be resolved by following the steps on this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&tmp_task=solveCategory&lc=en&dlc=en&cc...
I've run disk check etc as suggested on that link, no errors are found, but nothing seems to resolve the problem more than temporarily. Seems odd that this only happens if I close the lid (sleep mode with the lid up is fine, doesn't crash the computer).
Can anyone advise?
Thanks

Hello,
Very strange, can you go to BIOS and reset the setting " By Default " ?. How did you check the disk ?
This is an unusual probleme Hp Mini 210 . And notice me after your reset the bios settings.

Problems with cached previews and File Not Found errors in preview and build

I am having serious issues with Encore CS5.
When I try and build a preview or disk/image I am getting File Not Found errors. I have emptied the media cache in the preferences but my project still seems to be referencing previously cached files or rendered menus. Is there any way to manually delete previous previews or the cache. I know that there are no missing files in my project. Any help would be very much appreciated.
I am running Mac OS 10.6.4 and Encore 5.0

To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf

It shows the log sequence not found error while all the log seqences exist?

Why the database shows the log sequence not found error while all the log seqences exist?
SQL> select*from v$log_history;
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
1 657328345 1 1 519368 13-JUN-08 543434
519368 13-JUN-08
2 657370849 1 2 543434 13-JUN-08 567705
519368 13-JUN-08
3 657373012 1 3 567705 14-JUN-08 570408
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
4 657373039 1 4 570408 14-JUN-08 570464
519368 13-JUN-08
5 657374623 1 5 570464 14-JUN-08 573505
519368 13-JUN-08
6 657375015 1 6 573505 14-JUN-08 573856
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
7 657376537 1 1 570465 14-JUN-08 573543
570465 14-JUN-08
8 657377084 1 2 573543 14-JUN-08 575109
570465 14-JUN-08
9 657377094 1 3 575109 14-JUN-08 575114
570465 14-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
10 657377103 1 4 575114 14-JUN-08 575121
570465 14-JUN-08
11 657377106 1 5 575121 14-JUN-08 575123
570465 14-JUN-08
11 rows selected.
RMAN> flashback database to sequence=10 thread=1;
Starting flashback at 14-JUN-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
RMAN-20206: log sequence not found in the repository

Apart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
You seem to mistake the column recid for the sequence column.
The sequences are listed in -not surprisingly- the sequence# column.
Sybrand Bakker
Senior Oracle DBA

Required disk not found

I am setting up my nano and it says it is unable to syn it because "the required disk not found". Anyone have any clue what that means?

If you're using XP, the following document may be of some assistance:
iTunes displays -50 error message when syncing iPod on Windows XP
(Even though you're not getting a -50, the message you're getting can sometimes be a symptom of the same basic problem.)

IPad sync disk not found

Ipad2 sync fails at stage 7, with error message "disk not found" , not sure if the solution!!

Here for PC
https://discussions.apple.com/message/8488249#

Disk not found error

Similar Messages

Maybe you are looking for