Disk replacement on Satellite Pro A10 (30GB)

Question

Hello
I am after some guidance on which replacement disk to purchase for this Toshiba Satellite Pro A10 laptop, model PSA15E-03U7V-EN. It still has the original 30GB disk in it but it's been showing errors when checking the disk with the Windows XP tool (it's still useable though). I've made a complete backup to an external drive.
Thanks in advance
Themos Tsikas
HWinfo32 output follows:
General Information
Drive Controller: E-IDE (ATA-5)
Drive Channel: Primary, Master
Drive Model: TOSHIBA MK3021GAS
Drive Revision: GA124A
Drive Serial Number: 73J94628T
Drive Capacity: 28,615 MBytes (30 GB)
Drive Geometry
Number of Cylinders: 16383
Number of Heads: 16
Sectors Per Track: 63
Bytes Per Sector: Unknown
Bytes Per Track: Unknown
Number Of ECC Bytes: 46
Number of Sectors: 16514064
Total 32-bit LBA Sectors: 58605120
Cache Buffer Size: N/A
Controller Type: Not Specified
Transfer Modes
Sectors Per Interrupt: Total: 16, Active: 16
Max. PIO Transfer Mode: 4
Multiword DMA Mode: Total: 2, Active: -
Singleword DMA Mode: Total: 2, Active: -
Ultra-DMA Mode: Total: 5 (ATA-100), Active: 5 (ATA-100)
Max. Multiword DMA Transfer Rate: 16.7 MBytes/s
Max. PIO with IORDY Transfer Rate: 16.7 MBytes/s
Max. PIO w/o IORDY Transfer Rate: 16.7 MBytes/s
Transfer Width: 16-bit
Native Command Queuing: Not Supported
TRIM Command: Not Supported
Device flags
Fixed Drive: Present
Removable Drive: Not Present
Magnetic Storage: Present
LBA Mode: Supported
DMA Mode: Supported
IORDY: Supported
IORDY Disableable: Supported
Features
Write Cache: Present, Active
S.M.A.R.T. Feature: Present, Active
Security Feature: Present, Inactive
Removable Media Feature: Not Present, Disabled
Power Management: Present, Active
Advanced Power Management: Present, Active
Packet Interface: Not Present, Disabled
Look-Ahead Buffer: Present, Active
Host Protected Area: Present, Enabled
Power-Up In Standby: Not Suppported, Inactive
Automatic Acoustic Management: Not Suppported, Inactive
48-bit LBA: Not Suppported, Inactive
Self-Monitoring, Analysis and Reporting Technology
Raw Read Error Rate: 100/50, Worst: 100
Throughput Performance: 100/50, Worst: 100
Spin Up Time: 100/1, Worst: 100 (Data = 942)
Start/Stop Count: 100/Always OK, Worst: 100 (Data = 5072)
Reallocated Sector Count: 100/50, Worst: 100 (Data = 52)
Seek Error Rate: 100/50, Worst: 100
Seek Time Performance: 100/50, Worst: 100
Power-On Hours/Cycle Count: 69/Always OK, Worst: 69 (Data = 12677)
Spin Retry Count: 201/30, Worst: 100
Power Cycle Count: 100/Always OK, Worst: 100 (Data = 4823)
Power-Off Retract Count: 100/Always OK, Worst: 100 (Data = 126)
Load/Unload Cycle Count: 18/Always OK, Worst: 18 (Data = 824818)
Temperature 100/Always OK, Worst: 100 (Data = 43.0 C)
Reallocation Event Count: 100/Always OK, Worst: 100 (Data = 46)
Current Pending Sector Count: 100/Always OK, Worst: 100 (Data = 233)
Off-Line Uncorrectable Sector Count: 100/Always OK, Worst: 100
UltraDMA/SATA CRC Error Rate: 200/Always OK, Worst: 200
Disk Shift: 100/Always OK, Worst: 100 (Data = 118)
Loaded Hours: 82/Always OK, Worst: 82 (Data = 7578)
Load/Unload Retry Count: 100/Always OK, Worst: 100
Load Friction: 100/Always OK, Worst: 100
Load-In Time: 100/Always OK, Worst: 100 (Data = 389)
Head Flying Hours: 100/1, Worst: 100

Answer 1

Hey,
> 48-bit LBA: Not Suppported, Inactive
This would mean you can only use HDDs up to 128GB if 48bit LBA is not supported.
But if your current HDD has only 30GB I think something with 80GB should be enough or how much disk space you want?
The HDD brand is not important, every HDD is compatible so just buy new HDD with good offer. :)