Disk utility restore problem: cannot drag internal hdd to destination field

I'm currently trying to restore a time machine backup after my boot ssd recently failed, but am having trouble restoring the backup to my secondary internal drive in the optical bay. My set up isthe following:
Failed ssd in primary hdd bay of MacBook Pro (mid 2010)
1tb secondary hdd in optical drive bay with time machine backup of failed ssd.
2tb external drive
The following is what I have done so far...
1. Booted into the secondary internal drive and restored the time machine backup onto the external USB drive.
2. Booted from the restored backup on the USB drive (this now looks like my old computer again but is very slow as its USB 2.0)
3. Partitioned the secondary internal drive in the optical bay.
4. Now I want to copy the restored volume on my USB drive to the secondary internal drive in the optical bay.
When I open disk utility's restore function I can put my original volum in the source field, however, it will not let me put either partition of my internal drive in the destination field. It has no problem putting other partitions from the USB drive in the destination field - just will not allow anything from the internal drive. Why is this?
I'm thinking it could possibly be because it is in the optical drive bay and apple has prevented copying full volumes into this bay, but then again surely this would be needed when burning DVDs at some stage. Any ideas? Many thanks in advance for any help.

I managed to complete the restore and you may have been right - I booted from the internal hdd then restored the time machine backup stored on the usb drive to a different partition on the internal hd. Seemed to work fine now running of the hd in the optical drive bay but has still crashed a couple of times which is pretty odd. Perhaps the failed ssd in the main drive bay is still causing a bit of a nuisance (it registers for the first 3 minutes after booting up then disappears). Also didnt notice the responsiveness too much when upgrading from hd to ssd, but going the other way back to hd - can definitely now tell the difference. Painfully slow at times! I need to get that ssd replaced I think. Anyway thanks for your advice!

Similar Messages

Disk Utility Restore Problems

Hello All,
The Boot Camp Assistant told me that I had to reformat my hard drive as Mac OS Extended (Journaled) so I:
-Cloned the drive with Carbon Copy Cloner,
-Booted from my external hard drive, and
-Erased my internal disk (Using Disk Utility).
Now, when I try to restore (using Disk Utility) from my external to my internal drive, I get one of two errors:
-RESTORE FAILURE: Lost connection to helper tool.
-RESTORE FAILURE: Could not establish connection with helper tool.
Does anyone have any idea what's going on? I've gone through this whole thing once before for Boot Camp, but the last time didn't yield any crazy errors...

This sounds odd, you normally would only need to create a new partition for BootCamp, rather than erasing the entire drive.
I have no idea what is going on to produce those error messages, nor can I find much information with Google - which is unusual.
So the following is based on my best guess.
When you erased the volume, did you set the partition table to be GUID? This is required for Intel Macs. It might be worth repartitioning the startup disk, and making sure that you have the correct options all the way through for your OS X partition:
HFS+ (Journaled)
GUID
(No OS 9 drivers)
Once this is finished, exit Disk Utility.
To restore your clone, use Carbon Copy Cloner from your external drive, and simply back the external drive onto your newly formatted internal drive.
Once CCC has finished, then you can run Boot Camp - and follow [these instructions|http://manuals.info.apple.com/en/BootCampInstall-Setup.pdf]. You don't need to erase your entire Mac Hard drive, the Boot Camp Assistant will create a new partition for Windows.

Disk Utility: No Mac Drive in Internal HDD. Can't format or erase.

Hey guys, I just got my new mac mini and I installed a Samsung pro 840 SSD. The thing is I messed up. I turned my mac on and everything went fine, Disk Utility showed up telling me that the drive was "unreadable". I decided to turn the thing off and start Recovery so I could install Mountain Lion onto the SSD. When igot to Recovery, disk utility told me there was an error with the drives and it had to erase them, while it was working I got the The Spinning Rainbow Beach Ball of Death so I turned my mac off. Huge mistake it seems. Now when I want to install Mountain Lion there is no available disk to install it. I started Internet Recovery and accessed Disk Utility again and the Internal Drive actually appears but with nothing installed in it. The option to erase or format are not available. I did a disk verification and repair and everything was OK. I'm going crazy over this. Please help me guys!!! I'm leaving a picture so its clearer. THANK YOU!!

Being a new Mac Mini the system is attempting to create a Fusion Drive setup out of your SSD. Do you have dual drives in the system, the built-in one in addition to the new one you installed?
This is an issue with the new Mac Mini and iMac systems (see here: http://reviews.cnet.com/8301-13727_7-57584237-263/disk-utility-may-combine-custo m-drive-setups-on-some-macs/) as these systems ship with Fusion Drive setups and Disk Utility assumes this is the desired setup when you use it to "fix" the drives.
You can see that when you select "Internal Drive" the type is "Logical Volume Group." Since this group is greater than the 840GB, my guess is this is the combined space from your SSD and the built-in one.
To clear this issue, open the Terminal (from the Utilities menu in the OS X installer), and run the following command:
diskutil cs list
You will see a tree of information, with one grouping showing a UUID for the Logical Volume Group (the UUID will be a string of numbers and letters, separated by several dashes).
With this UUID, run the following command to destroy the logical volume group (you can try copying and pasting the UUID, though I"m not sure if the services in the Recovery HD partition support copy and paste--otherwise just type it in manually):
diskutil cs delete UUID
When finished, follow the instructions in the artifcle I linked to above to install OS X to an external drive (if available) and use Disk Utility there to fix and manage the drives, as opposed to the version in the Recovery HD partition.

How to clone disk (Disk Utility Restore, boot: kernel panic)

Hi, I've tried two times to clone my 120GB system disk (old Core2Duo Mac Mini (macmini2,1)) to a 1TB disk attached via USB cradle. Running Snow Leopard 10.6.8 which long time ago was upgraded from Leopard.
Used the Disk Utility "Restore" for cloning. Both times Disk Utility completed without errors. However when I swap the 1TB from USB cradle into mac mini (to internal SATA), the result of even a "Save Mode" boot attempt with Shift/Mod key held is always a kernel panic: "unable to find driver for this platform: \"ACPI\"
As my goal is to clone the existing system to a larger drive, a new install of OS X on the 1TB drive is out of the question. The original 120GB disk boots without problems. But the cloned attempts do not boot.
Judging from the kernel panic it is as if "Restore" doesn't actually restore, but leaves out files. Thus Disk Utility restore in SL is buggy?
Or is my cloning method wrong? Currently I just drag the 120GB system disk (the live running system) to the Source, then drag the 1TB USB disk to Destination, and allow full erase of destination, and do the priviledge elevation to root i.e. the usual password prompt. Does successful cloning need something extra...?

If I understand correctly, what you're doing is copying your 120 GB drive to the 1 TB drive, then swapping the 1 TB drive into your Mac and trying to boot from it, and it fails.
You're doing it wrong, and that's why it fails. A Finder copy (what you're doing) does not respect permissions or symbolic links, which are required to make the system boot. You need to use something that does respect that.
Get your hands on a copy of SuperDuper http://shirtpocket.com/
(free for basic use, but it's well worth the small fee of $27.95 for full access to all features); and/or
Carbon Copy Cloner http://bombich.com
and use one of those to make a bootable clone of your 120 GB drive, then you can boot from it.

Disk Utility: Restore no longer creates bootable images?

So I have a new hard drive for my macbook, and followed the procedure I used last time of using disk utility restore to write the current hard drive image to the new disk, with the new disk in a USB enclosure.
I have done this before, it creates a bootable copy on the new disk, swap the disks away I go.
This time however the new disk is not bootable. When starting it gets to the grey screen with the rotating white pips then dumps back to a black screen with error messages (like its trying to boot of the network).
Swapping back to the old disk boots just fine, so its a problem with the image written to the new disk by disk utility restore not being bootable.
Is this a known issue? I searched the forum with no answers, and am frustrated that its now working as I have run the image twice now at about 5 hours a go for 100GB of data so I am sure its not the copy. Straight after the copy the original disk has about 10 more files than the new disk that's just been imaged, has their been some update to disk utility in the OS X patches that means it no longer copies some key files?
Note that partition on new disk is GUID as it should be, and I don't want to re-install anything from the install media I want to use make disk utility work as designed.

I found two references that may help:
A) At http://everythingapple.blogspot.com/2007/11/use-powerpc-mac-to-create-bootable.h tml it says "PowerPC Macs use the Apple Partition Map, but this poses no problem for Intel Macs, even though Intel Macs use the GUID Partition Table. The reverse is not true however. PowerPC Macs cannot boot disks with a GUID Partition Table."
1. Open up Disk Utility and select your backup drive. Select the "Partition" tab.
2. Go to the "Options" and choose "Apple Partition Map", which is the partition type necessary for PowerPC Macs.
B) Carbon Copy Cloner - Red Dot Warning on main screen: "The target volume will not boot this computer because PowerPC Macintoshes cannot boot from USB devices."
Looks like I'll have to install the 2.5" SATA drive into my PowerPC MacMini to upgrade my system volume from 80gb to 320gb.

Disk Utility - Restore can not unmount target drive

Just got a brand new MacBook Pro with Lion. As usual there are "issues"..
I wanted to move my old TimeMachine backup (250 GB) to a larger Firewire drive (500 GB) and found a lot of instructions on that.. Problem is they don't work on Lion. (Both are Iomega drives with Firewire)
The instructions suggest that using Disk Utility to "restore" the new drive from the old will work but I always get the Error "Can not unmount target drive..." and I can see that the source drive is unmounted but not the target. I did all of the "First Aid" stuff to both drives.. (and the target drive was turned into a MacOS partition and verified..)
I then tried the exact same process on my old MacBook Pro (Leopard) and everything worked as expected..
Was there another way to do this in Lion.. or is this broken..???
Thanks for any feedback..
John..

Is the new drive prepped?
Drive Preparation
1. If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
In Disk Utility you clone as follows:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the new backup drive. Source means the old backup drive.
If you still have a problem then boot into the Recovery HD:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Choose Disk Utility from the main menu then click on the Continue button.

Disk Utility Restore - Why error -34 ?

I cloned my 700 G3 iBook's 20GB hard drive to a 30GB ext. HD with Disk Utility>Restore before sending it for repair. Now that I have gotten it back I want to restore the data to the computer's HD. I'm getting error -34 (disk full).
So what is the nature of my problem? Must the destination disk be at least as big as the source disk? (Because it is copying the entire 30GB size.) Or must I empty (erase, reformat) the destination disk? (Because it is adding the data to what is already there.)
Thanks

Michael:
You were right. Thanks. The data would have been added to what was already there.
While I had made back-up clones before, this was the first time I needed to put it back into the computer's hard drive.

Disk Utility Restore

I copied my macbook pro's hard drive to an external drive using disk utility restore. Is it normal for the copy's overall size to be smaller than the original? I thought it would be the same size? The external had no data on it. The original is 273.54 GB and the copy is 271.45 GB... Problem?

May I try to answer your question. When you copy a disk there are a number of files which are not copied such as Trash, swap files and any temporary files that may have on the old disk will not be copied to the new disk. So while the approximately 2 GB of data might at first glance seem like a lot, it is in fact not really that much. I hope that helps you to understand what is happening there.
|___________________
Allan

IMac won't launch, disk utility says I cannot repair my Macintosh HD, back up files, reformat the disk and restore backed up files. How do I do all that? Help!

iMac won't start up, disk utility tried to repair disk it shows "keys out of order" error message in red and advises me to back up files, reformat disk and restore backed up files. I have no idea how to back up and restore etc... Help! Please!

Get an external drive of sufficient capacity to hold everything on your internal drive.
Partition and format the external drive.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Clone your internal drive to the external drive.
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Boot from the external drive.
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
      "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the external disk icon from which you want to boot.
5. Click on the arrow button below the icon.
Reformat the internal drive and install OS X.
Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
Open Startup Disk preferences and set the internal drive as the startup volume, then click on the Restart button.
Restore your data from your external drive backup.

Internal Hard Drive Disk Utility Repair Problem

Hello all! I'm really hoping someone can help me out because I'm in a bit of a panic right now about all of this.
For starters, I have a Mid-2007 20" Intel based iMac.
The other day, I turned on my computer and got a flashing question mark and the computer would not boot. Luckily, I have an external hard drive, so I went through the process of using the Install Discs to use the Hard Drive to start up my computer. Everything worked out and once the computer turned on, I was able to access my Hard Drive and had full access to my files. I powered down my computer as I had to run out the door for school and was planning on backing all of my files up on my external hard drive tonight.
Unfortunately, when I turned on my computer, my internal hard drive had disappeared. I can only start the computer with my external drive plugged in.
I accessed the Disk Utility, and it was the first place I was able to locate my Hard Drive. On the left hand side, underneath the external drive, it simply says "Media". I cannot click on ANY of the options under First Aid and the only thing it seems I can do is Erase the drive.
I would REALLY like to avoid this option, as there are nearly 5 years worth of documents on this computer.
My S.M.A.R.T. Status says Not Supported, and it's saying that the Total Capacity is 0 Bytes.
I suppose I should also mention that with the disc I used I am now running OS X 10.4.11, but previously, I was running 10.5. I can't remember the last decimal place. I don't know why there was a difference, as I used the same disk...
I have NO IDEA where to go from this point besides taking it somewhere to see if my files can be recovered.
Can anyone help me out here?
If you need any more details about my computer/the actions I took, just let me know.
Thanks so much!!

If you cannot access the internal HD then it may have crashed, I am getting you may not have been backing up either so if it has crashed and you don't have a backup then your data is probably gone. If you can get the internal HD to show up again before you do ANYTHING else back it up using Time Machine (assuming you use 10.5.x or above) or create a clone on an external HD using either SuperDuper or Carbon Copy Cloner.
My recommendation at this point is to take the machine into and an Apple Store or AASP to have it looked at.

Problems transferring Backups to new External HD using Disk Utility restore

I'm having issues using Disk Utility to transfer my backups to a new disk.
I am transferring data from a 250GB external harddrive to a new completely zero'ed 1TB Iomega external harddrive. Both Harddrives are connected via USB. On my old 250GB HD i have a few folders containing about 100GB of data (raw video footage) that are not in the "Backups.backupdb" folder.
I follow the tutorial in item 18 of the FAQS on this forum exactly (except i didnt check erase destination) but i get an error message each time after about 3 minutes:
"Could not restore - Operation not permitted"
This is what my log says:
2009-12-27 17:12:32 +0000: Restore Disk
2009-12-27 17:12:32 +0000: Source: “Darkers HD”
2009-12-27 17:12:32 +0000: Destination: “Untitled”
2009-12-27 17:12:32 +0000: Erase Destination: No
2009-12-27 17:12:32 +0000:
2009-12-27 17:12:32 +0000: Starting Restore…
2009-12-27 17:12:32 +0000: Validating target...
2009-12-27 17:12:32 +0000: done
2009-12-27 17:12:32 +0000: Validating source...
2009-12-27 17:12:32 +0000: done
2009-12-27 17:12:32 +0000: Validating sizes...
2009-12-27 17:12:32 +0000: done
2009-12-27 17:12:32 +0000: Copying
2009-12-27 17:14:01 +0000: could not copy /Volumes/Untitled/Backups.backupdb/Mac/2009-04-15-054708/Macintosh HD/Applications/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app/Contents/Frameworks/AdobeACE.framework/AdobeACE; Operation not permitted
2009-12-27 17:14:01 +0000: Bom copy exited with error 1
2009-12-27 17:14:01 +0000:
2009-12-27 17:14:01 +0000: Could not restore - Operation not permitted
2009-12-27 17:14:02 +0000: Could not restore - Operation not permitted
2009-12-27 17:14:02 +0000:
I can see from this that it is having issues with a file in the destination:
/Volumes/Untitled/Backups.backupdb/Mac/2009-04-15-054708/Macintosh HD/Applications/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app/Contents/Frameworks/AdobeACE.framework/AdobeACE
This file is in the first Backup i ever made and all subsequent backups. So i went and looked at this backup through the time machine application and deleted this file from the backup and all subsequent backups. However when i then did the restore again i got the same error message and when i looked at the log it was identical except it had issues with a different "AdobeACE.framework" file from another Adobe CS3 program. I dont want to go through and delete all these types of CS3 files from my backups for obvious reasons, i would much rather understand what the issue is and know whether there is a way round it.
It may well be simply because i have not checked the "erase destination" box before restoring but somehow i doubt this is the issue as the new 1TB HD has already been "zero'ed" as explained earlier.
Any help would be appreciated guys.

check the box to erase destination. the fact that you zeroed it out makes no difference. this is a known issue and checking that box was recommended for a reason.

Disk Utility does not show my internal hard drive.

Recently, my Macbook Pro crashed.
THE PROBLEM
1. I turn it on, it starts normally at first, the Apple Logo Shows for several seconds
2. It changes to a no-smoking sign without the cigarette
3. If I try to boot safe mode, a folder appears with a question mark
4. If I try the internet recovery, I get to the part where I can restore OSX, use disk utility, etc.
5. When I try to restore OSX, it doesn't show my hard drive as avilable to install upon - no drives are shown
6. When I try to use disk utility, it only shows my Mac Base System, totaling 2GB, I cannot do anything.
THE QUESTIONS
1. What do I do? Thoughts? How do I recover my hard drive data before sending this computer to Apple to fix?
2. How can I use an external enclosure to recover my data using my desktop? What cords do I need? What is a good drive? Is it hard?
3. My SD card slot shows, could I install OSX on that and try to load my OSX to gain access to my harddrive that's missing?
4. Why would my main hard drive not show? I'm supposed to have a 250GB hard drive.
5. Is there anything I can do on Terminal to try to make my full hard drive appear? Or gain access?
6. What will Apple do with my RAM that I installed? I upgraded to 8GB? Will they just return as is?
Thank you.
Model: MBP from Mid-2010 13" running OSX Mountain Lion 250GB HD

Youre working the wrong end trying to revive a dying drive, a replacement is only $65
Did you have a backup of your vital data?
Terminal isnt going to do anything to help your HD.
questions:
1. get a new HD, install OS........recovery internal HD data using another computer and throwing the internal HD into a USB enclosure to extract data......however depending on the HD, data extraction may prove futile.
2. external USB enclosure, comes with USB cable....takes 3 mins to put internal HD into enclosure.
3. no,...... installing OS on a dying drive is beating a dead horse,...
4. because its dead/ dying.
5. no
6. Yes, they wont mess with your RAM.
Contact Apple for fix, of if you have the skills you can install a new HD yourself

Disk Utility "restore" fails with "no such file or directory"

Some time back, perhaps a LONG time ago, I successfully used Disk Utility's "restore" function to "clone" my Mac OS X partition onto an external disk, before I upgraded the OS on my internal drive.
This weekend I tried to do it again, and failed on every attempt.
My first attempt was on my MacBook. At very end (the progress "bar" was all blue) it died saying that there was an error (2), "no such file or directory". I think the external drive probably isn't GUID, which would make it non-bootable, but I'd still think "restore" itself should work.
Okay, let's try my Power Mac G5, which is where it worked several releases ago. Same thing.
Okay, one more try... Booted into safe mode (in case background activity accounts for the missing file/directory), did the restore again, failed again.
I realize that SuperDuper or Carbon Copy Cloner or other tools may be "better", but since this worked once it seems like it still should.
Any ideas?
Doug

Did you:
A. Repair the hard drive and permissions prior to cloning?
B. Erase the destination drive before cloning?
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
For added precaution you can boot into safe mode before doing the clone.

Disk utility Restore and Back up

when using Disk utility and dragging my source internal HD to the source window and then dragging my external HD to the destination window then clicking on restore.
After this completes can I then boot from the external HD? I have been using DeJuVu with no problems on a lacie ext HD. i just purchased an OWC Mercury elite and did a DeJuVu back up, but the OWC wont boot.
It mounts and shows up on the restart in sytem preferences. I contacted OWC and they recommended doing another back up. They also told me i could do the restore from disk utilities and would be able to boot from the ext.
I am now doing a restore on the imac but still wondering if this will work, if so I could do my cloning of the HD with out using DeJuVu. the only thing I would lose is the ability to do scheduling.
Thank You
Dick

I never had any problem backing up a clone using DeJuVu. I always backed up to external sata HD's and a Lacie firewire ext. Also when I used CCC this time it worked fine.
When I bought the OWC Mercury Elite is when I had a problem. After spending a day with there tech dept with no success. I came to the conclusion that only one HD could be booted from there ext 2 drive enclosure. I contacted the the next morning and talked to there senior tech and he confirmed that the enclosure when split using two drives independently that only one was bootable.
I am not sure why you can't get a complete bootable clone. What are the drives and what are you trying to clone to. Ext, internal or your single drive which you have partitioned?
I feel if your cloning you should always do it on a separate drive.
My methods are I never partition and never fill my operating system over half of the drive capacity.
Dcik

Disk Utility Restore Function

If I use the restore function in Disk Utility to copy me Macintosh HD drive to an external drive, can I later restore it back and have everything the same?
I am going to reinstall the OS, but am concerned that my last time machine backup may not be up to date and have everything, I can not boot into the HDD, and I know that if I restore the same image I might have the same issues as now with the OS, but that is not my concern at the moment. So, I am copying the Macintosh HD to an external drive using the restore tab and want to make sure that if I do it the other way around, will it be the same and will I have a backup of all my data (particularly my local copies of mail folder) once I restore?
If this does not work, what is the default location for my mail items so I can pull all those and preferably my preferences along with it as I have a lot of rules and other items in mail that I would like to keep.

If I use the restore function in Disk Utility to copy me Macintosh HD drive to an external drive, can I later restore it back and have everything the same?
Yes.
The Restore option of Disk Utility is for cloning one disk volume to another, also known as a full backup. Clones are 100% reversible. Note that if you use the Restore option of Disk Utility it will erase the target volume. If you are using Lion or later you must boot to the Recovery HD in order to clone the main startup volume.
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
To reverse the process simply swap the Source for the Destination and vice-versa.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the arrow button below the icon.

Disk utility restore problem: cannot drag internal hdd to destination field

Similar Messages

Maybe you are looking for