Disk Utility says HD, "needs to be repaired" Options?
Using Disk Utility to Repair Permissions has worked fine, but when I "Verify Disk" I get this:
"Error: The underlying task reported failure on exit" among other text. It says that our HD "needs to be repaired".
How do I do this best? What do you all recommend?
Is Disk Warrior the only/best option?
Is there another app that I should use first?
Is there a free option, using a built-in utility?
On an intel mac you cannot run OS 9 or classic so there is no need to worry about OS 9.
If you have the same problem and Disk Utility cannot repair the drive and you decide to do a reinstall you can either do a archive and install, which would not remove your old data and files but would just replace the system with a new one. Chances are that will not fix a problem with the disk directory.
If you want to reformat the drive and reinstall the everything will have to be reinstalled from scratch as it will all be erased.You system restore disk can be used for this and then any third party apps you have will have to be reinstalled.
Before doing either, I would recommend that you do a complete backup to an external drive using Carbon Copy Cloner or Super Duper or some other backup application.
Similar Messages
-
Disk Utility says I need to repair disk
My computer is running a little sluggish so I went into the Disk Utility and selected verify disk. I got the message below. I inserted the OS X disk but the repair disk option wasn't available. I bought the computer with Panther and got Tiger later, unfortunately I don't have the Tiger disk. How do I fix this problem?
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Macintosh HD
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repairIf you are running Tiger, you need the Tiger install disc you purchased in order to run Disk First Aid repair.
And withhout your Tiger install disc, you cannot perform an Archive & Install retaining Tiger, etc. so bad move not keeping this in a safe place.
Your only other option is running fsck.
http://docs.info.apple.com/article.html?artnum=106214 -
Disk Utility says HD needs repair-how to boot from original disk?
Hi,
My iMac has been acting up badly. Finally on Friday, it had trouble turning on and a burning smell arose from the top. Came on but with the blinking folder with question mark. So turned it off and tried again to turn on: no chime and couldn't turn it on.
Went to Genius bar this a.m. Tried different cord. It turned on. Everything came up fine. Genius ran special test. Everything came back with green check. But he said the internal hard drive could very likely be starting to fail.
Back home. Just ran the Disk Utility to "Verify." It couldn't continue verification. Got these messages:
Invalid volume directory count.
Error: Filesystem verify or repair failed.
The volume Macintosh HD needs to be repaired.
Questions:
1) Can I repair using the First Aid utility (or is it more about getting a new HD)?
2) If so, can someone remind me what keys to press on startup to boot from the CD?
3) I have 10.5.8 right now. Can I still boot from the original Tiger installation CD and use that Disk Utility?
Thanks for your urgently needed help!If you're on 10.5.8 have you not got that disk as that would probably be the best one to use? If not, the disk that came with your Mac should still boot up. Disk in drive and restart holding down the 'C' key. Hopefully it'll boot - albeit slowly. At the multi-language screen choose your language and at the next screen from the menu bar select Utilities>Disk Utility. Select Macintosh HD on the left and 'repair disk'. Hopefully it'll do the necessary repairs. If it fixes anything click 'repair disk' again until you get a clean pass and then from the Apple menu restart as normal.
If you haven't got a backup make sure you make one ASAP. -
Disk Utility says "drive can't be repaired, disk and restore your backed up files."
My Mac Book Pro froze yesterday and I had to force restart it. It had been showing me messages that my hard drive disk was full for a while and I was in the middle of transferring files to my external hard drive and I accidentally put a huge large file from my external hard drive into the trash on my laptop which makes me wonder if that means I added more GB to a computer that was already very full. Anyway, after freezing I restarted it and the desktop wouldn't load properly. The desktop picture was there, but folders on desktop did not appear, finder bar was missing and the dock was acting super slow and nothing worked when clicked on. Then the next few attempts were around the same result and eventually became stuck on the apple logo, spinning gear and a progress bar that was not loading at all.
Here's what I've tried so far:
Safe mode- nothing happens
Command + R - I am unsure how to work this since I can't seem to find an internet connection when it prompts for one. None of the internet connections have much signal and my own information doesn't seem to load since the gear spins to find the internet connection name and password I typed to load it but can't seem to find it. Perhaps I have the wrong internet information, but I don't think so.
I tried Command + S to use in single user mode and type in a command to help fix the drive, BUT, even though the black screen and white lettering mode did show up, it remained in a place where I was not allowed to type anything and the last thing written at the bottom of the screen was something about set up for bluetooth, I think. I tried this twice and both times it stopped in the same place and I could not type a command.
Disk Utility using installation dvd to verify and repair disk. Verify says disk needs repair and then repair has some red colored phrases: Invalid volume file count. (It should be 786374 instead of 786274) Incorrect number of thread records. And there was another problem listed but I do not remember it. Then, near the end of repairing it says: "Disk Utility stopped repairing Macintosh HD." It tells me it couldn't repair the disk and that I should back up as many of my files as possible, reformat the disk and restore backed up files.
That would be fine and dandy, but I have no idea how to back up my files and do all this. I have no idea how to exactly get the data off my hard drive. If someone does, please list a step by step guide for me on how to do so.
I have an external hard drive and I tried plugging in and selecting the hard drive and making a "New Image" to copy to the external hard drive destination, but it just stops a few seconds into it and tells me there is an input/output error. I tried read only, read/write only, compressed options for making a copy and all yield the same result.
In Disk Utility, I believe I have a partition -the Macintosh HD. I have listed on the left hand side: 320.07 GB Hitachi HTSS45.....etc. and below it in non-bolded, grey lettering it says "Macintosh HD."
The Hitachi, when clicked upon, shows the S.M.A.R.T. status as Verified and the Macintosh HD doesn't show much in details except for "Not mounted."
At one point, the Macintosh HD was in bold lettering and seemed to be mounted for a few minutes. When that happened, I was able to see the details reading: Mount Point: /Volumes/Macintosh HD, Capacity: 319.73 GB, Available: 11.92 GB, Used: 307.81 GB, etc.
I'm getting nervous to keep turning on and off the computer on force start and shut downs, especially since I have been reading up that the longer the computer is on, the more the hard drive is in use and the more chance for it to start deleting or overwriting my files. Is this true?
It's not mounted anymore since it was momentarily mounted. I just want to get my files off the disk and save them to my external hard drive. That is my main goal right now. What can I do?
Thank you in advance for your help!If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
Disk Utility says volume needs repair, tests failed. Now what?
What exactly does this mean? Unfortunately, I bought this TiBook from a classmate, and he didn't have his Tiger DVD, so all I have is 10.0 and a 10.1 upgrade. Do I have to use this to re-install?
Thanks!
JimHello James:
Since you do not have the Tiger DVD you have a few choices (none particularly good). You should ALWAYS have the software install DVD - I am not sure what will happen when you run repair disk from an older software install CD/DVD. You will be unable to reinstall Tiger unless you have the proper DVD. I would return the iBook and get my money back from your classmate unless that person produces the proper software.
Incidentally, if Apple's repair disk (run from the CD/DVD) is unable to repair problems, DiskWarrior is the next option. DW is the 'gold standard' of directory repair, but it is pricey at about $90.
Barry -
Hi my hard drive is failing and I'm overseas in Thailand. I bought a Buffalo 1TB to back up my mac 13inch HD version 10.6.8, only problem is it wont back up. Disk Utility says ex HD is fine. I need to backup before I take it for repairs. What can I do? Thanks advice appreciated. NL
I think we both had our wires crossed a little.
Then just go ahead and clone your internal drive to your Buffalo. You are not going to use Time Machine, and you do not have to partition it. So ignore all that stuff I posted. Let me start from scratch.
First check that your Buffalo drive is partitioned GUID and formatted Mac OS Extended, Journaled. So open Disk Utility, select the topmost entry for the Buffalo drive. You should see something like this:
I have selected the entry of my CalDigit drive. Note that the Partition Map Scheme is GUID. Now, select the volume (mine is "System Backup."
Here you see it is a Format type of Mac OS Extended, Journaled. If that's what you see then you are good to go.
With Disk Utility still open:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it to
the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the Buffalo drive. Source means the internal startup drive. -
Disk Utility says disk can't be repaired but it is still working
Recently my MacBook Air had some performance problems--many programs crashing, etc. I ran Disk Utility and it came back saying the disk is corrupt and needs to be repaired. I rebooted and ran the Disk Utility repair function but Disk Utility said the volume could not be repaired and recommended that I back everything up, wipe the drive, and restore.
The thing is that my computer is now functioning normally. Disk Utility still says there's a huge and unrepairable problem, but aside from that, everything is working fine.
I have a time machine backup, so I could wipe and restore the drive fairly easily, but it would take some time to do it. I'm in the middle of some important things for work and so I'd rather put this off for a couple of weeks, if I can.
A few questions: (1) is there other software, aside from Disk Uility, that I should try to repair the disk? (2) How much of a ticking time-bomb do I have with this problem? Though reformatitng and restoring would be a hassle right now, it is less of a hassle than if my computer were to fail completely minutes before a presentation. So, if this is an urgent problem, then I'll probably address it now. But, if Apples have been known to soldier on for months despite error messages like what I've received, then I may take my chances and wait to reformat/restore until a more convenient time.
Any and all thoughts appreciated, thanks!Thanks for these replies.
I've got regular time machine backups and just backed up some of my data by copying some key folders to an external drive. I'm bit paranoid about backup integrity and would ideally like to do another full backup to a different drive using a system other than time machine, in the event that something goes wrong with the time machine backup. Any recommendations on good and affordable backup software to do a backup of my TM backup?
One other question: I seem to encounter problems like this pretty frequently. I'd say once a year or so, my drive fails completely or gets near enough to failing that I have to wipe and restore. (I've never had a TM backup fail to work, though the last go around there were some hiccups which has led to my backup paranoia.) I've had this happen on multiple computers, so I'm becoming pretty convinced that the problem lies somewhere in my data. Is it possible (even likely) that there's something in my data causing this recurring problem? If so, is there anything I might be able to do to try and pinpoint and address this problem? I'd love to go one year without having to wipe/restore my machine!
For a while I thought I just had bad luck. But I think this is like the 4th or 5th time this has happened in the past 4 years and every time, I'm restoring from a backup, so I come back with the same data. It's the one constant since I've had 3 different machines over this same time period. -
My hard drive crashed. The disk utility says it can not repair. I tried to boot in safe mode but I stopped after 10 minutes. Is that impatient or how long can it take?
I have the installation disk but doesn't that erase everything?I have never bought a new computer from Apple so I don't know the details of what is covered by the warranty. You can try taking it to the Apple Store and they may have a copy of DW they can run. Or maybe not and they will just wipe the drive and reinstall the OS for you and if you haven't made a backup before they do that then tough luck. I'd check first!
If you buy Diskwarrior on DVD it will boot the computer. I think Apple Stores carry it, but you can also buy it directly from the vendor. I also don't use Lion OS so I don't know the details. You may be able to get their download version and boot from your recovery partition, then run it without a DVD. -
My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?
See mount section in 1st linked article.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk -
Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Error after running Disk Utility, do I need to replace disk drive?
Don't know much about MACS, switched from PC to MAC, will NEVER go back, I asked the person what they think and said " sounds like I have to replace my Disk Drive, I recently replace the Hard Drive, still new to MACS so don't know my way around yet, still trying to learn more, any suggestions mag subscriptions, books in plain english?
thanks in advance, for taking the time to respond.
Lately when I've ran Disk Utility I've been getting this message:
*Verifying volume "Macintosh HD"*
*Checking HFS Plus volume.*
*Checking Extents Overflow file.*
*Checking Catalog file.*
*Incorrect block count for file Database3_BROKEN-journal*
*(It should be 6 instead of 0)*
files.",0)
*Checking Catalog hierarchy.*
*Checking Extended Attributes file.*
*Checking volume bitmap.*
*Volume Bit Map needs minor repair*
*Volume Bit Map needs minor repair*
ormation.",0)
*Invalid volume free block count*
*(It should be 18925736 instead of 18925748)*
*The volume Macintosh HD needs to be repaired.*
*Error: The underlying task reported failure on exit*
*1 HFS volume checked*
*Volume needs repair*
What's the difference between buttons *" Verify Disk Permissions & Verify Disk "*?
After I run Verify Disk Permissions, the outcome is fine, but after I run Verify Disk, I get the error message above.
So once getting the error message, I'd click the *" repair disk permissions "*, I get "
*Repairing permissions for "Macintosh HD"*
*Determining correct file permissions.*
*Permissions repair complete*
*The privileges have been verified or repaired on the selected volume "*.
But soon after its been repaired, I click the " Verify Disk " again just to see if it'd give me the same error message, its the same every time.
So is it really repaired you think?Hi, hellopinky. The error messages you're seeing don't necessarily indicate that you need to repair your hard drive. Your drive could be failing, and that might cause the reported problems, but there are other causes for those errrors besides a failing drive. If the S.M.A.R.T. status indicated in the First Aid tab of Disk Utility says "Verified", your drive is probably fine. If the S.M.A.R.T. status is "Failing", replace the drive immediately. That indicates a hardware problem that no software can fix.
"Repair Disk" and "Repair Disk Permissions" address two different classes of software problems. The former button repairs (or tries to repair) problems with the directory that records what's on your hard drive and where on the drive each item is stored. The latter button checks to make sure the read/write permissions for your files are correct, and if not, it corrects them.
The "Verify" buttons for Disk and for Permissions carry out the same checking routines as the "Repair" options, but they don't try to correct anything — they only report what they find. If there's a problem on my hard drive, I want it corrected, not just reported. So I consider the "Verify" options to be a real waste of time, and I never use them.
Your permissions appear to be fine, but your disk directory is damaged in at least one way that Disk Utility hasn't repaired. If you haven't run the "Repair Disk" routine yet (I can't tell from your post), do that now, and see whether it reports that the problems have been fixed. If it does, run it repeatedly until you get two successive reports showing a clean bill of health: no problems found or repaired.
If "Repair Disk" reports problems that it couldn't fix, or if you can't get two successive "clean" runs after half a dozen tries, you'll need a stronger, third-party disk utility such as DiskWarrior to repair the directory, or else you'll need to reformat the hard drive and reinstall everything on it from scratch — that will clear away the old, damaged directory, but is very time-consuming. Leaving a damaged disk directory unrepaired will eventually lead to loss of data, kernel panics, and other potentially serious consequences you really don't want to experience, so don't just ignore the problem. -
Several months ago I bought a 64GB PNY USB memory stick to transpord data quickly.
It seemed to work fine. I could format it as a Mac partition and use it. I hardly ever need
it so I just put it away.
Today I wanted to use it to put a file on and take it to the Kinko's/FedEx to print, and I
find I cannot mount it on any of my computers, iMac, MacMini or MacBookPro.
In Disk Utility virtually everything is greyed out.
Disk Utility says: "This partition can't be modified" "This disk is not writeable and cannot be partitioned"
If I try to mount it, it says "This disk cannot be mounted"
There is no physical read-only switch or setting on the disk that I can see and it is very small.
I has a Mac OS installed on it, so I wonder if that is a problem? I should be able to write over that
or reformat it I would think.Thanks for these replies.
I've got regular time machine backups and just backed up some of my data by copying some key folders to an external drive. I'm bit paranoid about backup integrity and would ideally like to do another full backup to a different drive using a system other than time machine, in the event that something goes wrong with the time machine backup. Any recommendations on good and affordable backup software to do a backup of my TM backup?
One other question: I seem to encounter problems like this pretty frequently. I'd say once a year or so, my drive fails completely or gets near enough to failing that I have to wipe and restore. (I've never had a TM backup fail to work, though the last go around there were some hiccups which has led to my backup paranoia.) I've had this happen on multiple computers, so I'm becoming pretty convinced that the problem lies somewhere in my data. Is it possible (even likely) that there's something in my data causing this recurring problem? If so, is there anything I might be able to do to try and pinpoint and address this problem? I'd love to go one year without having to wipe/restore my machine!
For a while I thought I just had bad luck. But I think this is like the 4th or 5th time this has happened in the past 4 years and every time, I'm restoring from a backup, so I come back with the same data. It's the one constant since I've had 3 different machines over this same time period. -
Hi, how do I manage storage? Disk Utility says “other” is taking up most of my storage but I don’t know where to find “other". Please help!
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
USB Hard Drive that Disk Utility says it can't unmount
I have a 93.2 Gb Hard Drive (from an old G4 PowerBook) inside an enclosure with USB connection. While trying to recover data from it using Data Rescue (on a G4 PowerBook), Data Rescue II hung. After restart, the USB Hard Drive can not be read at all. Disk Utility says it can't repair it or erase it because it can't "Unmount" the disk. What can I do with the USB Hard Drive?
try this: open system preferences/spotlight/privacy and drag that external into spotlight privacy then try Disk Utility.
-
Yosemite on MacBook Air - Third time installed, now will not be startup disk. Disk Utility says OK. Disk Warrior says 375 pages of bad .plist files. How delete plist files?
What does "Accessibility" mean?Had the same problem, finally realized that the FileVault Encryption was struck at 19%. Speed back up to normal after I disabled FileVault using terminal command - sudo fdesetup diable
To check whether the FileVault is the culprit, go to System Preferences --> Security & Privacy --> FileVault to see if encryption is in progress.. For me the blue bar was less than a quarter with status 'estimating time remaining'..
Then open Terminal and type in: sudo fdesetup disable
It will then ask for the admin password (to be it asked twice), then it was disabled... Back to normal life again..
Here is my terminal log for reference:
Last login: Tue Oct 21 23:05:13 on console
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ sudo fdesetup disable
Password:
Enter a password for '/':
..fdes.
FileVault has been disabled.
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is Off.
Maybe you are looking for
-
HT4914 Access to music when not connected to WiFi?
Can I play music from my device if I am not in a WiFi area with iTunes Match?
-
How to disable weblogic built-in HTTP session filter?
Hi, I want to use my own HTTP seesion filter to manage HTTP session on weblogic clustered servers. It seems that weblogic servers plugin its HTTP session filter already for servlet. How can I use my own HTTP session filter to replace WebLogic built-i
-
I am trying to connect a PC and Macbook Pro to the internet using the airport express. I have a cable broadband ISP. The PC was "wired" (basic modem/ethernet direct to PC). Everything worked fine. Installed the airport, followed set-up. The Mac recog
-
Is it possible to test the dropdown values?
Here we are trying to test dropdown value using Adobe browser lab for firebug. We are testing Registration form which has many dropdown fields. But using Adobe browser lab for firebug not able to get the dropdown values. Thanks Jenny
-
i keep getting this error message when I try to download Photoshop Elements -413 Header Length too Large Any suggestions gratefully received