Disk Utility says I need to repair disk

My computer is running a little sluggish so I went into the Disk Utility and selected verify disk. I got the message below. I inserted the OS X disk but the repair disk option wasn't available. I bought the computer with Panther and got Tiger later, unfortunately I don't have the Tiger disk. How do I fix this problem?
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Macintosh HD
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair

If you are running Tiger, you need the Tiger install disc you purchased in order to run Disk First Aid repair.
And withhout your Tiger install disc, you cannot perform an Archive & Install retaining Tiger, etc. so bad move not keeping this in a safe place.
Your only other option is running fsck.
http://docs.info.apple.com/article.html?artnum=106214

Similar Messages

  • My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?

    My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?

    See mount section in 1st linked article.
    Disk Unmount Using Terminal
    Disk Utility – Force Mount Disk

  • Error after running Disk Utility,  do I need to replace disk drive?

    Don't know much about MACS, switched from PC to MAC, will NEVER go back, I asked the person what they think and said " sounds like I have to replace my Disk Drive, I recently replace the Hard Drive, still new to MACS so don't know my way around yet, still trying to learn more, any suggestions mag subscriptions, books in plain english?
    thanks in advance, for taking the time to respond.
    Lately when I've ran Disk Utility I've been getting this message:
    *Verifying volume "Macintosh HD"*
    *Checking HFS Plus volume.*
    *Checking Extents Overflow file.*
    *Checking Catalog file.*
    *Incorrect block count for file Database3_BROKEN-journal*
    *(It should be 6 instead of 0)*
    files.",0)
    *Checking Catalog hierarchy.*
    *Checking Extended Attributes file.*
    *Checking volume bitmap.*
    *Volume Bit Map needs minor repair*
    *Volume Bit Map needs minor repair*
    ormation.",0)
    *Invalid volume free block count*
    *(It should be 18925736 instead of 18925748)*
    *The volume Macintosh HD needs to be repaired.*
    *Error: The underlying task reported failure on exit*
    *1 HFS volume checked*
    *Volume needs repair*
    What's the difference between buttons *" Verify Disk Permissions & Verify Disk "*?
    After I run Verify Disk Permissions, the outcome is fine, but after I run Verify Disk, I get the error message above.
    So once getting the error message, I'd click the *" repair disk permissions "*, I get "
    *Repairing permissions for "Macintosh HD"*
    *Determining correct file permissions.*
    *Permissions repair complete*
    *The privileges have been verified or repaired on the selected volume "*.
    But soon after its been repaired, I click the " Verify Disk " again just to see if it'd give me the same error message, its the same every time.
    So is it really repaired you think?

    Hi, hellopinky. The error messages you're seeing don't necessarily indicate that you need to repair your hard drive. Your drive could be failing, and that might cause the reported problems, but there are other causes for those errrors besides a failing drive. If the S.M.A.R.T. status indicated in the First Aid tab of Disk Utility says "Verified", your drive is probably fine. If the S.M.A.R.T. status is "Failing", replace the drive immediately. That indicates a hardware problem that no software can fix.
    "Repair Disk" and "Repair Disk Permissions" address two different classes of software problems. The former button repairs (or tries to repair) problems with the directory that records what's on your hard drive and where on the drive each item is stored. The latter button checks to make sure the read/write permissions for your files are correct, and if not, it corrects them.
    The "Verify" buttons for Disk and for Permissions carry out the same checking routines as the "Repair" options, but they don't try to correct anything — they only report what they find. If there's a problem on my hard drive, I want it corrected, not just reported. So I consider the "Verify" options to be a real waste of time, and I never use them.
    Your permissions appear to be fine, but your disk directory is damaged in at least one way that Disk Utility hasn't repaired. If you haven't run the "Repair Disk" routine yet (I can't tell from your post), do that now, and see whether it reports that the problems have been fixed. If it does, run it repeatedly until you get two successive reports showing a clean bill of health: no problems found or repaired.
    If "Repair Disk" reports problems that it couldn't fix, or if you can't get two successive "clean" runs after half a dozen tries, you'll need a stronger, third-party disk utility such as DiskWarrior to repair the directory, or else you'll need to reformat the hard drive and reinstall everything on it from scratch — that will clear away the old, damaged directory, but is very time-consuming. Leaving a damaged disk directory unrepaired will eventually lead to loss of data, kernel panics, and other potentially serious consequences you really don't want to experience, so don't just ignore the problem.

  • Disk Utility says HD, "needs to be repaired" Options?

    Using Disk Utility to Repair Permissions has worked fine, but when I "Verify Disk" I get this:
    "Error: The underlying task reported failure on exit" among other text. It says that our HD "needs to be repaired".
    How do I do this best? What do you all recommend?
    Is Disk Warrior the only/best option?
    Is there another app that I should use first?
    Is there a free option, using a built-in utility?

    On an intel mac you cannot run OS 9 or classic so there is no need to worry about OS 9.
    If you have the same problem and Disk Utility cannot repair the drive and you decide to do a reinstall you can either do a archive and install, which would not remove your old data and files but would just replace the system with a new one. Chances are that will not fix a problem with the disk directory.
    If you want to reformat the drive and reinstall the everything will have to be reinstalled from scratch as it will all be erased.You system restore disk can be used for this and then any third party apps you have will have to be reinstalled.
    Before doing either, I would recommend that you do a complete backup to an external drive using Carbon Copy Cloner or Super Duper or some other backup application.

  • Disk Utility says HD needs repair-how to boot from original disk?

    Hi,
    My iMac has been acting up badly. Finally on Friday, it had trouble turning on and a burning smell arose from the top. Came on but with the blinking folder with question mark. So turned it off and tried again to turn on: no chime and couldn't turn it on.
    Went to Genius bar this a.m. Tried different cord. It turned on. Everything came up fine. Genius ran special test. Everything came back with green check. But he said the internal hard drive could very likely be starting to fail.
    Back home. Just ran the Disk Utility to "Verify." It couldn't continue verification. Got these messages:
    Invalid volume directory count.
    Error: Filesystem verify or repair failed.
    The volume Macintosh HD needs to be repaired.
    Questions:
    1) Can I repair using the First Aid utility (or is it more about getting a new HD)?
    2) If so, can someone remind me what keys to press on startup to boot from the CD?
    3) I have 10.5.8 right now. Can I still boot from the original Tiger installation CD and use that Disk Utility?
    Thanks for your urgently needed help!

    If you're on 10.5.8 have you not got that disk as that would probably be the best one to use? If not, the disk that came with your Mac should still boot up. Disk in drive and restart holding down the 'C' key. Hopefully it'll boot - albeit slowly. At the multi-language screen choose your language and at the next screen from the menu bar select Utilities>Disk Utility. Select Macintosh HD on the left and 'repair disk'. Hopefully it'll do the necessary repairs. If it fixes anything click 'repair disk' again until you get a clean pass and then from the Apple menu restart as normal.
    If you haven't got a backup make sure you make one ASAP.

  • Disk Utility says volume needs repair, tests failed. Now what?

    What exactly does this mean? Unfortunately, I bought this TiBook from a classmate, and he didn't have his Tiger DVD, so all I have is 10.0 and a 10.1 upgrade. Do I have to use this to re-install?
    Thanks!
    Jim

    Hello James:
    Since you do not have the Tiger DVD you have a few choices (none particularly good). You should ALWAYS have the software install DVD - I am not sure what will happen when you run repair disk from an older software install CD/DVD. You will be unable to reinstall Tiger unless you have the proper DVD. I would return the iBook and get my money back from your classmate unless that person produces the proper software.
    Incidentally, if Apple's repair disk (run from the CD/DVD) is unable to repair problems, DiskWarrior is the next option. DW is the 'gold standard' of directory repair, but it is pricey at about $90.
    Barry

  • Disk Utility says it can't repair hard drive...now what?

    I managed to get Disk Utility to run the Repair, but it gave me a message that said after 3 attempts to repair the disk, it was unable to. Repair failed. Now what do I do? Any thoughts?

    Ah, I see your other post is a duplicate of this thread. Regarding the "underlying task reported failure" message, are you getting that with respect to "temp#####" files? Per Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks, you can ignore those messages.
    DiskWarrior can often make repairs that Disk Utility cannot.
    If you have access to another Mac, you can try FireWire target disk mode to backup/recover the eMac data.

  • Disk Utility will not let me 'repair disk'

    Hello Mac helpers,
    When I run Disk Utility it reports: "First Aid Failed.
    The Underlying Task Reported Failure on Exit."
    Also:"1 HFS Volume Checked
    Volume Needs Repair."
    However the "Repair Disk" button does not illuminate so I cannot click to repair the disk as instructed.
    Any and all suggestions welcome.
    Thank you in advance for your assistance.

    Here's how you must do it (cannot repair a startup volume):
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Message was edited by: Kappy

  • Disk Utility won't let me repair disk

    Hello Mac helpers,
    When I run Disk Utility on my hard disk it reports: "First Aid Failed.
    The Underlying Task Reported Failure on Exit."
    Also:"1 HFS Volume Checked
    Volume Needs Repair."
    However the "Repair Disk" button does not illuminate so I cannot repair the disk as instructed.
    Any and all suggestions welcome.
    Thank you in advance for your assistance.

    You will need to contact Apple if you no longer have the recovery disks that came with your MacBook. They will probably charge you for a replacement. Thanks for the .

  • HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

    I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
    Help me Obie One Canobie you are my last hope

    I have confused myself with the facts!  Started out keeping track of every step and every variable but have sort of lost it as we progress here.  First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question.  Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option.  Then powered down the computerator.
    Next started up computerator.  Turned Time Machine ON  and experienced multiple successful backups!  Then I started up a few applications, Mail and Text Edit (but not Safari so far).  Had a few more successes.  After each backup, I used Disk Utility to verify the backup disk is still OK.  This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
    Put computer to sleep for the night.  Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD!   Did a restart and verified the backup disk... OK.
    Did a few    Sleep-bad, Restart -OK    repetitions.
    It seems consistent:  Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
    =============================
    Now then, I don't understand everything I know here.  Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier).  Is there any truth in this?
    I may abandon this Seagate thing for something more compatible.  What's out there that we know works reliably for us?

  • My disk utility says my hd is a disk image and has 1.26 gigs?

    it is a brand new 750 gb hd and It has been formatted and has mountain lion installed. I can boot off of it and it shows up as 750gb when I use a little external usb adapter. But not when its plugged in internally. I have tried to repair the disk in disk utilitys but it wont let me click on anything. I tried the old hd in the external usb adapter, booted up fine, its a little slow, but when its internal it shows the same disk image thing and has 1.26 gigs. Im lost. help please.
    -dave

    A drive that can not report its Make&Model and a reasonable size/capacity cannot be repaired by any software.
    If it is cabled and powered correctly, it has died.
    If you are certain it has not died, that leaves your MacBook or possibly the internal connecting cable, if any.

  • Have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair files and i needed to format hard drive and start again. now nothing works

    have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair disk and needed to format and start again.
    comp said it could not unmount disk and now when comp trys to boot all i get is a question mark on the screen. help

    Erase and Install
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Quit DU after formatting completes and return to the installer. Install Snow Leopard.
    5. After restart into Snow Leopard download and install Mac OS X 10.6.8 Update Combo v1.1.

  • HD crash.  Disk utility says invalid node structure, invalid record count.  Disk utility cannot repair. Now what?

    My hard drive crashed.  The disk utility says it can not repair.  I tried to boot in safe mode but I stopped after 10 minutes.  Is that impatient or how long can it take?
    I have the installation disk but doesn't that erase everything?

    I have never bought a new computer from Apple so I don't know the details of what is covered by the warranty.  You can try taking it to the Apple Store and they may have a copy of DW they can run.  Or maybe not and they will just wipe the drive and reinstall the OS for you and if you haven't made a backup before they do that then tough luck.  I'd check first!
    If you buy Diskwarrior on DVD it will boot the computer.  I think Apple Stores carry it, but you can also buy it directly from the vendor. I also don't use Lion OS so I don't know the details.  You may be able to get their download version and boot from your recovery partition, then run it without a DVD.

  • USB Hard Drive that Disk Utility says it can't unmount

    I have a 93.2 Gb Hard Drive (from an old G4 PowerBook) inside an enclosure with USB connection. While trying to recover data from it using Data Rescue (on a G4 PowerBook), Data Rescue II hung. After restart, the USB Hard Drive can not be read at all. Disk Utility says it can't repair it or erase it because it can't "Unmount" the disk. What can I do with the USB Hard Drive?

    try this: open system preferences/spotlight/privacy and drag that external into spotlight privacy then try Disk Utility.

  • Disk utility says repair needed but repair grayed out

    I ran a disk utility verification, which indicated that repair was necessary.  However the repair option was grayed out.  How do I effect a repair?

    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Maybe you are looking for