Remote desktop connections not showing in server manager 2012 for one of the session hosts

This is a three server deployment with one server being the connection broker, gateway, licensing, etc with two session host only servers.
rdmgr
rd1
rd2
Using the server manager on the rdmgr connection broker (or any other server for that matter) yields only connections from rd2 with nothing from rd1 displaying.
Users can connect to rd1 without issue.
At one point rd1 had the connection broker role installed also but high availability was not setup. I removed the role hoping it would correct the problem but no luck.
Any help would be appreciated. Thanks.

Hi,
1. Is rd1 part of a collection?
2. On rd1, in Computer Management, is the broker's computer account a member of the local RDS Management Servers group?
3. If you run the below command do you get a list of sessions:
query user /server:rd1
4. Any errors/warnings in either the broker's or rd1's event log?
Broker: Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-SessionBroker
rd1: Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-SessionBroker-Client
Both: System and other logs
-TP

Similar Messages

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

Remote Desktop Connection not working

I am able to remote desktop connect to my home computer from work; however, I can't remote desktop connect to my work comptuer and server. I believed it has something to do with my Linksys E3000 access point settings but I'm not sure where to look for and verify. I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network. I also VPNP in to my work place so that it has the same IP address as at work and still, remote desktop connection from home to work is not working. Any suggestion is much appreciated.

thebluemamba_24 wrote:
Connecting from home to your remote desktop server has nothing to do with your router. Certain ports are needed to be opened from the server’s end in order to host an application. Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work. In case it will not work, then contact your IT guy.
If you read my previous post it said:
"I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network."
I think my above statement answers your question of "Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work." However, your statement prompts me think of something else. What I have tried is bring my laptop to work and tried connect via RDC to the server and it works but it just not working when trying at home. What I have not done is instead of brining my laptop to work and try RDC there, perhaps I should I try it on a friend's or relative's network and see if I can do RDC to my server at work. If this does not work as well, then, could it be that at work there is something something outside RDC coming? But even if this is so, why can't VPN work?

Remote Desktop Connection Not Going To Full Screen on EIZO MX340 Monitor 1536x2048 Resolution

I am using a EIZO Rx-340 as a secondary monitor. So far I am only able to get into full screen by using Ctrl-Alt-Fn-Pause but it does not change the resolution. It does not help to move the slider to large. There is a black space at the top and bottom
of the display.

Hi,
Please take a try with the steps below:
1. Start "Remote Desktop Connection".
2. Click on "Options".
3. Click on the "Display" tab.
4. On "Display configuration" settings, you can change the "Remote Desktop Connection" display by moving the slider from "Small to Large".
5. By moving the "Slider" all the way to large, the display settings will automatically set to "Full Screen".
Here is the screenshot:
Also please take a check if the monitor itself is configured well.
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Remote desktop connection to a windows server

Is it possible to connect to a Windows server on an iPad2 the way one can use Remote Desktop Connection on a Mac?

download and install any one of the RDC apps available on the app store.

Remote desktop connection limit in windows 2003 administration as well as in the mixed environment of windows 2003 and 2008 servers

RDP protocol i.e. Remote desktop connection is configured to perfrom and manage software administration of ORACLE application and database servers which runs on windows 2003 server. Two sessions are allowed on each of these servers for database
administrators. The question is:
a) if network administrators who perform window server administration (50+) are included in
2 sessions limit or do they manage all these servers through Console Session which is separate from the remote desktop connection limits of 2 sessions.
b) How is the 2 sessions limit prescribed by microsoft (more of a licensing limit) handled in the mix environment of windows 2003 and 2008 server where all these servers are managed on the VMWARE?
avnish sharma

Hi Avnish,
Thank you for posting in Windows Server Forum.
By default any windows server will provide 2 remote session for administration purpose only. No matter which administrator is accessing that server. If you will connect the console session then 3.One server is accessed by 3 Session (console + Remote +
Remote). When the particular server reached this limit then any working administrator will receive a message to log out as other user trying to access the session or if we had provided the setting then new user is restricted to login.
If you want more than 2 remote desktop session than you need to purchase TS\RDS CAL, install TS\RD Licensing role, activate it first and then configure CAL on it. There are 2 types of CAL available (USER & DEVICE). You can purchase CAL according to your
company requirements.
Hope it helps to understand!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Apple remote desktop will not show my computer screen on class screens

Hi
I hope someone can help. i have just set up a mac suite running latest OS X 10.10 using apple remote desktop. The system is a bit sensitive but mostly works fine. The odd computer drops off etc.
However, I want to be able to show the teacher computer on all of the class screens as the projector screen is quite small at the front of the class. When I set up screen share it says it is working but it does not show on their screens. They do get a screen sharing message on the menu bar of their computers but nothing happens. Am I missing a setting? I think I am doing right!
thanks
Tim

Hi jsyedu129,
Wondering if you found a solutions to your problem. I'm having the same problem. Can't not share my screen with classroom computers. Love to know if you have got this to work.

Disks Not Displayed in Server Manager 2012 After Upgrade

I have two identical IBM x3650 M3 servers with the M5014 RAID controller installed. The internal SAS drives are configured with three RAID 5 logical drives, basically a C:, D:, and E:. They also have an external eSATA drive with a Silicon Image eSATA
card installed that is used for backup. Both servers were upgraded from Server 2008R2 to 2012R2. Both of the server's firmware was updated prior to the upgrade and are using the same versions.
On the first server, all of the RAID controller's logical drives are displayed under Server Manger > File and Storage Services > Volumes > Disks. All of the volumes on these drives and the eSATA drive are displayed correctly under Server
Manger > File and Storage Services > Volumes.
On the second server, all of the volumes correctly displayed under Server Manger > File and Storage Services > Volumes. However, only the first logical drive is displayed under Server Manger > File and Storage Services > Volumes
> Disks. The other two logical drives are not displayed. The drives show up correctly under Disk Management and Device Manager. All of the data and shares are accessable and the server functions like it did before the upgrade. While it doesn't seem
critical at the moment, I would like to find out why the logical drives are not being displayed.

Hi,
Did you have a failover cluster with a highly available storage solution that uses LSI MegaRAID controllers and use Server Manager to manage the storage using the LSI SMI-S storage provider? If so, the associated physical disks may not appear correctly in Server
Manager when you create storage pools or virtual disks from the storage pools.
To work around this issue, run the following Windows PowerShell cmdlet on all nodes, and then refresh the Server Manager UI:
Update-StorageProviderCache –DiscoveryLevel Full
For more detailed information, please refer to the article below:
Known Issues: File and Storage Services in Windows Server 2012
http://social.technet.microsoft.com/wiki/contents/articles/13392.known-issues-file-and-storage-services-in-windows-server-2012.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TS3276 After updating software yesterday, noticed that sent emails are not showing up in Sent Folder for one of my accounts.

After updating software yesterday, noticed that sent emails are not showing up in Sent Folder?

Are you storing Drafts, Sent, Trash and Junk messages on the server via your .Mac account with Mail?
If so, do you access your .Mac account with an email client on another computer or regularly access your account via webmail on another computer?
If not, any other reason you need to store Drafts and Sent messages on the server?
While composing a message with Mail, it is temporarily saved in the account's Drafts mailbox so sounds like something went wrong with the process between finishing and sending the message with Drafts and Sent being stored on the server.
If you don't have any need for this, better to store Drafts and Sent messages locally on the hard drive with Mail.

REMOTE DESKTOP (MICROSOFT) NOT WORKING SINCE YOSEMITE UPDATE. ANY ONE KNOW A FIX FOR THIS ?

MICROSOFT RDP HAS WORKED FINE WITH YOSEMITE.
AIRPORT UTILITY IS UP TO DATE.
SINCE YOSEMITE UPGRADE THERE IS NO ABILITY TO CONNECT FROM HOME TO OFFICE.
IOS DEVICES CAN CONNECT BUT THEY ARE CELLULAR ANYWAY SO IT SEEMS TO BE CONNECTED TO THE WIFI NETWORK.
I AM RUNNING MY CONNECTION TO THE INTERNET ON A RECENTLY PURCHASED NETGEAR ROUTER.
THERE IS ALSO A TIME CAPSULE IN MY SETUP.
ANY SUGGESTIONS ?

Thats a good point. Let's troubleshoot network connectivity.
Open RDP, right click your connection and select edit, then copy the PC name.
open terminal Finder > Utilities > Terminal and type the following
telent YourPCName 3389
where "YourPCName" is the name you copied above. Hit enter
You won't get a "success" message or anything, if the terminal window just goes blank, then there is not a firewall/network issue.
If you clearly get an error, then it's either Firewall or DNS. Try the following in terminal
ping YourPCName
if it starts showing an IP address, line by line by line, then it is definatelly a firewall issue
if not, trying getting the IP address from the winders box by opening a command prompt and type
ipconfig
do all the above again but use the IP address in place of YourPCName

SQL 2012 connection not showing in SAP Lumira after downloading and installing the driver

Hello,
I am very new to SAP Lumira. I followed the steps in the videos to install the SQL 2012 JDBC drivers. I downloaded the drivers from Microsoft installed them in the %program files% folder as suggested by Microsoft.
I then followed the instructions for installing the drivers in SAP Lumira and the option to select SQL when Acquiring data is still grayed out.
Any help is appreciated.
I am running SAP Lumira version 1.21.0 build 49. This is the desktop version running on Windows 8.1.
Thanks again for any help.
Nelson

Hi
Which Edition of Lumira are you using?
SAP Lumira Desktop Personal Edition or SAP Lumira Desktop Standard Edition ?
If I remember correctly I got this option turned on only when I converted my personal edition to a standard edition by applying a key. I could install sql server 2012 JDBC driver by pointing to the correct Jar file in the %program files% folder. This was then available for me to select when adding a Data set. Regards AG

I just updated firefox to the lastest version. I have a network in which we access the server with remote desktop. Now I can only open firefox on one of the remote terminals or the server. I need to be able to use firefox on all of the terminals.

I get an error message that says an instance of mozilla firefox is already running, please close it to continue.
The question already explains the situation. I need all three terminals to use firefox concurrently.
Did not have this problem with the previous version.

That happens if all instances use the same profile folder.
Only one instance can use a specific profile.
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Trouble with Remote Desktop Connection to work PC

Note that I am trying to log into my work PC from my mac at home. My company recently announced we could log in from home with a mac into our work PC. they can't get it to work so I thought I'd try here. We use a mobile site on Safari to obtain a network connection - it launches a program called network connection and I appear to have that network connection (although very little data is being sent and received). I am then supposed to launch a program called Remote Desktop Connection (this program was installed from steps I ran through the first time I logged in through the mobile site, it is version 1.0.3), but when I do, it will not connect and the error message is that remote connection is not enabled, network is too busy, etc). However, the guys at the support desk using PCs can log into my work computer. The only info that's mandatory to input on the Remote Desktop Connection is my work computer name. I don't think this is the issue, because if I purposefully use an incorrect name for my work computer, the error message is different, stating it can't find my (work) computer. I also installed the most recent version of Java for 10.3.x The only issues I can think of are a) this won't work with 10.3.9, although I doubt this is it as the Remote Desktop Connection program appears a few years old, OR there is some firewall issue on my mac. I doubt that this is it, as I assume the mac's firewall protections are to prevent others from remotely logging into my mac, not prevent me from using my mac to remotely log into my work PC. Also, I don't use any third party firewall or other protection stuff on my mac other than whatever comes stock. if you've read this far, thanks, and any comments appreciated! am trying to log in using my dual 1.8 g5 with 1.5g memory using 10.3.9

Are you by any chance with a major retailer? My company just did the same thing. We used to connect via a Virtual Drive connection, but they took that away and went to RDC.
I had problems at first logging in as well. It was acting as if my password was wrong, but I knew that wasn't the case. I finally typed the password in the UserName area and found the problem!
I had two special Characters followed by a capital letter. For instance !@Axxxxxxxx. When I typed the password, I would push and hold the 'shift' key for the first three letters. When typing that in the "user name" field, it showed as !2axxxxxxx. You have to release the 'shift' key and repress it for each letter.
I hope this helps you!

Since upgrade to Windows 8, cannot save .rdp files under the Remote Desktop Connection application on the Desktop

Since I upgraded to Windows 8, I am no longer able to save individual Remote Desktop Connection files as .rdp files. I am talking about the traditional Remote Desktop Connection application on the Desktop that was in previous Windows versions, not the
Remote Desktop App from the Windows 8 store.
When I try to click on the Save button I get "An error occurred while saving to file"
When I try to click on the Save As button I get "Unable to open connection file" with the file address being where I tried to save it with the file name at the end.
Also when I upgraded to Windows 8, my .rdp files disappeared from my Documents folder.
I need to create different .rdp files for different programs that my employees get into on my server. Now I have to hand type all the info each time into the Programs tap on the Remote Desktop Connection window, because I can't save to an
.rdp file.
I like the Remote Desktop App from the Windows store but it won't let me designate specific programs to use using standard dos notation (ie c:\program files\ etc..). It just goes to my server desktop.
I want to promote Windows 8 to my employees but I need either .rdp files for the traditional Remote Desktop Connection or the ability to open specific programs using dos notation in the Windows Store Remote Desktop App.

I know this is an old post but others might still be having the problem. Here's what I did.
Create a new text file and open it in notepad. Copy the below into it and edit for your environment. (IP, screen size).
screen mode id:i:2
desktopwidth:i:1920
desktopheight:i:1080
session bpp:i:24
auto connect:i:0
full address:s:192.168.x.x
compression:i:0
keyboardhook:i:2
audiomode:i:2
redirectdrives:i:1
redirectprinters:i:1
redirectcomports:i:1
redirectsmartcards:i:1
displayconnectionbar:i:1
username:s:USERNAME
domain:s:DOMAIN
alternate shell:s:
shell working directory:s:
disable wallpaper:i:1
disable full window drag:i:1
disable menu anims:i:1
disable themes:i:1
bitmapcachepersistenable:i:1
use multimon:i:0
winposstr:s:0,3,0,0,800,600
audiocapturemode:i:1
videoplaybackmode:i:1
connection type:i:7
networkautodetect:i:1
bandwidthautodetect:i:1
enableworkspacereconnect:i:0
allow font smoothing:i:0
allow desktop com:0
disable cursor setting:i:0
redirectclipboard:i:1
redirectposdevices:i:0
drivestoredirect:s:*
autoreconnection enabled:i:1
authentication level:i:2
prompt for credentials:i:0
negotiate security layer:i:1
remoteapplicationmode:i:0
gatewayhostname:s:
gatewayusagemethod:i:4
gatewaycredentialssource:i:4
gatewayprofileusagemethod:i:0
promptcredentialonce:i:0
gatewaybrokeringtype:i:0
use redirection server name:i:0
rdgiskdcproxy:i:0
kdcproxyname:s:
You don't need to worry too much about what's in here. Save the text file as
filename.rdp then rightclick on the file and select edit. The familiar GUI rdp session editor will open. You can make changes in the GUI and
save or save as a different session.
Hope this helps.

Remote desktop (and VNC) show black screen

I am using Remote Desktop (or VNC) on a 10.6 laptop to access my 10.6 Mac Pro at work. The desktop Mac is up and awake because I can connect to it by SFTP and pull down files. But when I make a Remote Desktop connection, all I see is a black screen and no password window (to break through the screensaver, as usually happens). This used to work just fine - I don't know what changed. How do I diagnose and/or fix this - why isn't my remote access working? (btw, I don't know if this matters, but I have 4 monitors on this Desktop Mac Pro, although it used to work just fine).

Hi,
Please make sure you have installed the correct NIC drivers for your RDS server and PC, and checking the switches, setting the speed of NIC's to auto might help you to solve the problem.
You can also check the following items:
Please try lower screen(no full screen) resolution in Remote Desktop Connection to see whether this issue still exists.
Disable the use of "Bitmap Caching" on the RDP client.
Verity that the server, client and the network equipment using the "MTU" size.
More information:
A black screen may appear while logon by using remote desktop
http://support.microsoft.com/kb/555840
Technology changes life……

Remote desktop connections not showing in server manager 2012 for one of the session hosts

Similar Messages

Maybe you are looking for