Aperture File Transfer between Computers.

How can I transfer files from the Aperture Library (or individual projects/folders/image files) from my field laptop (MacBook Pro) to my main Aperture Library, which is located on a 2 Terabyte Buffalo external hard drive connected by USB 2.0 to Aperture on my iMac Desktop. My computers communicate on a wireless network. I would like to make adjustments in Aperture on the laptop prior to transfer. Therefore, I need to preserve the XMP sidecar data along with the master file. On my wireless network, I can open the Picture folder on the laptop from my iMac. Is there a way to import the contents of the laptop Aperture Library directly into my active Aperture library on the iMac?

Thanks, RWB and WL. The program exporet, transfer, and import worked perfectly. Just had to turn Airport off on the laptop before importing the .approgram file into Aperture on the desktop, since I have used the same copy of Aperture on both computers. Apple license allows primary owner to install and register their copy of Aperture on 1 desktop and 1 laptop. However, Aperture cannot be active simultaneously on both computers on the same network, since Apple detects the same serial number and locks the .approgram file.

Similar Messages

  • File transfer between computers?

    1) When I transfer stuff by FireWire & Migration Assistant from one computer to another, does it all go in a folder, or is it scattered throughout the recipient computer?
    I have not found this answer so far in Apple Support.
    Also, there seem to be slightly differing instructions in Apple Support regarding how to transfer files this way.
    This is to be just a temporary transfer while I change out (add) memory in my very-disturbed iMac.
    2) Does this process remove everything from my source computer, or does it just make a copy of it all?
    Thanks for the help.
    Txgrandmater

    Migration Assistant transfers to the same location as the data reside on the other computer.  MA is not intended to be used as a way to sync files from one computer to another.  It also isn't a backup utility.  Given what you intend a better choice would be a backup utility that can transfer selected files and folders across a network connection.  Possible candidates are:
    1. Transfer the data manually by drag and drop.
    2. Deja Vu
    3. SilverKeeper
    4. Tri-Backup
    5. Synk (Standard or Pro)
    Look for the above at CNet Downloads or MacUpdate.

  • [SOLVED]Simple file transfer between different os'es

    Hi
    I'm searching for some kind of simple file transfer between different computers/os (mainly arch and windows) on local net, without I have to set up any samba/ftp server etc. It would be perfect if i could select a file I want to transfer and then be able to receive it on a different computer.
    So far I've tried giver but I most of the times they can't find each other.
    Any know how I could archive something like the a bow?
    Thanks
    Last edited by zann (2012-12-07 01:43:44)

    Try using simple file sharing through http server 'oneliner's.
    - Note your host IP (which I refer to by "ip.of.your.server"),
    - Go under your directory where you want to share files and fire a command line :
    Using python : python2 -m SimpleHTTPServer 8000
    And you can access your files on the network using http://ip.of.your.server:8000/
    Using php : php -S localhost:8080 -t webrootpath/
    Files under webrootpath/ will be accessible from http://ip.of.your.server:8888/
    Using mongoose : mongoose -r . -p 8888
    Files will be accessible from http://ip.of.your.server:8888/
    You may restrict access, ie.:  -l -0.0.0.0/0,+10.60.100.105
    And have access/error logging (à la apache) too : -a access_log.txt -e error_log.txt
    NB.: You may install python or php under windows but mongoose is the easiest thing when it comes to windows -> linux.
    Last edited by xpixelz (2012-12-04 15:01:40)

  • File transfer between macbook and other macs

    I need to do a file transfer between my macbook and a macbook pro and my macbook and an ibook. What ways can you recommend? FTP is slow for me because it's a campus network, and bluetooth takes a while too (in the ranges of 1 to 2 hours). I believe it can be done through firewire and/or USB right?
    If I were to use USb, is there any special software needed? Or will each mac detect each other as a hard drive or?
    What about firewire? I understand it needs to have a hub or a server? Is that true? Can file transfers be done just via a firewire alone?
    Thanks!

    If you want to access your friend's files, he should enable File Sharing on his machine and you should choose Finder > Go > Connect to Server... His machine should show up in the Connect to Server dialog box. This should work with ethernet; AFAIK USB will not work.
    From Mac Help:
    "You can use an Ethernet cable to connect two Macintosh computers and share files or play network games.
    1. Connect an Ethernet cable from the Ethernet port of one computer to the Ethernet port on the other.
    2. Open Sharing preferences on both computers and turn on Personal File Sharing. Note the Computer Name for the computers.
    3. On one of the computers, choose Go > Connect To Server and then click Browse.
    4. Double-click the other computer in the window and enter your password, if necessary.
    If you manually configured the TCP/IP settings for the built-in Ethernet configuration on the computer you are connecting to, you may need to enter that computer's TCP/IP address in the Connect To Server dialog.
    To see or set the TCP/IP address, open Network preferences and choose your Ethernet port configuration from the Show pop-up menu (named Built-in Ethernet unless you gave it another name)."

  • File transfer between internal drives extremely slow

    Since the upgrade to the latest Lion OSX 10.8.5 on my Mac Pro, file transfer between internal drives is extremely slow. I used Disk Ulitly to repair the drives but no use. What could be the cause? Thanks

    Yes I have been transfering the same type of data in the same manner as before, this happened only recently. For example if I transfered lets say a 100MB single file from main HDD to 2nd internal HDD it would have taken around 10 seconds nwo it takes a minute or so. Also my iTunes library is located in the 2nd Drive and since this issue when I play music it keeps cutting off and coming back, I am sure this is due to the slow transfer speed of the drive. I can't figure out why it has gotten so slow, is it the drive or the OSX?

  • I can see my husbands library and he can see mine but we can not transfer between computers, I can see my husbands library and he can see mine but we can not transfer between computers

    I can see and play my husbands lirary and he can see and play mine but we can't transfer between computers.  How can we do that

    Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

  • File transfer between mac and windows 7

    Is it possible to transfer files between my Mac and a windows 7 machine via bluetooth?
    MacBook Pro OS X 10.6.4
    Thanks

    It will be slow, but there's no reason it shouldn't work as long as the Bluetooth hardware on both computers has the File Transfer Profile (all Macs do), and *Bluetooth Sharing* is checked in the Sharing system preferences pane on the Mac.
    If the computers are close enough to send files via Bluetooth, you'd be much better off just networking them together. You can then "mount" the PC hard disk on the Mac like any other disk and move files around easily. It will be hundreds of times faster too.

  • File Transfer Between Mac Mini and Beige G3 OS 9?

    I'd like to transfer files between a PPC Mac Mini with 10.4.x (Bluetooth and Airport) and a Beige G3 still running OS 9 which has USB and FW ports added.
    I ccould use a USB stick and be happy, but on the Mini that makes my USB modem hang up. I'd rather not burn data CDs each time. My G3 will not run 10.x due to a video card or RAM from OWC.
    So can any of the wireless USB sticks be made to work with OS 9? More obviously, is there a solution using any sort of wire or cable - I may be able to put them near one another at some point?
    Thank you.

    You should be able to use Firewire to transfer between them I believe.

  • Windows 8.1 ICS with file sharing between computers

    Can someone help me get ICS working with file sharing between two computers (directly connected), without enabling file sharing on the internet network (on a public untrusted network)?  Is this possible?  I have set up ICS between two Windows 8.1
    machines, but i can only get file sharing to work in one direction (from machine B to machine A)... UNLESS I turn on file sharing/discovery with the entire network from machine A (which i do not want to do).  I am not sure this exact question has been
    asked, so my apologies if it has.
    Here is my configuration.
    Machine A: win 8.1 (up to date), two NICs:  a wireless card (connected to internet) and a gigabit NIC (connected to machine B)
    Machine B: win 8.1 (up to date), one NIC, a gigabit card connected to machine A
    What i did:
    On Machine A:  I enabled ICS on machine A's wireless card, which automatically assigned the IP address 192.168.137.1 to the second NIC
    On Machine B:DHCP was enabled so it automatically got an ip address (192.168.137.62), internet sharing works fine (i can open a browser, get email, etc.)
    On Machine B: I enabled "Find devices and content" on the network device
    On Machine A: Going into "view network settings" it lists my wireless network and the gigabit NIC.  The wireless under 'Wi-Fi' says 'Connected', and i can click on this and I have the option to turn on "Find devices and content".
     On the wifi connection, i leave 'Find devices and content' turned OFF (so i don't discover computers on the wireless network, which is a public network).  My gigabit NIC shows up as "unidentified network"/"Limited".
     When i click on the gigabit NIC, it does NOT give me an option to turn on "Find devices and content", it just shows some properties of the NIC (manufacturer, description, driver, mac address) and button that says "Copy".  On
    the gigabit connection's properties (which is listed as "unidentified network/limited"), the option for 'Find devices and content' is missing.
    On Machine A: I open a file browser and type '\\192.168.137.62' and it works correctly, i can see the computer and move files around.
    On Machine B: It doesn't work.  I open a file browser and type in "\\192.168.137.1", and nothing happens.
    If i enable 'Find devices and content' on machine A's wifi connection, everything works, but now everyone on the public network can see my computer.
    Question:  How can i enable file sharing between machine A and machine B ONLY?
    Thanks for any help you can provide.

    The whole point of public networks is that they are unsafe, so file sharing is not permitted for your protection.
      If you have a network which you know is safe, the way to get file sharing working is to change your security policy so that it is set to private, not public. You do this from the local security policy (on the ICS computer).
    Bill

  • Unusual File Transfer between SCCM Server & DCs

    Hello There,
    Today i got an alert from my network team about huge data transfer between SCCM Server & DCs on the sites.
    I wonder what does SCCM has to transfer / DC need to fetch from SCCM Server?
    Right now i have blocked the DC IPs on the SCCM Server - Windows Firewall which stopped the flow but i am keen to find out what is going on.
    Any suggestions?
    Regards,
    Maqsood
    Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

    Assuming you verified there is no client installed on the DC, about the only other thing ConfigMgr itself would send data for is if a share on the DC were designated either as a package source location for driver packages or Software Updates, or if it
    was set as the destination for the Backup Site Server maintenance task.  Beyond that, it may be something other than ConfigMgr responsible for the file transfer.

  • File transfer between notebooks

    Hey all,
    I have a Powerbook G4 running Panther and a Macbook Pro running Leopard, both behind DSL routers. I need to connect to the PB G4 to retrieve some files from it. Does anyone have a solution? I need to be able to select the file which I need to retrieve. So something like a remote desktop connection, ftp or vnc would be best. Oh, they are in different countries too
    Cheers

    You won't hear from Apple officials here, this is a peer-to-peer support site and polls are not allowed so your post may not stay here.
    To send ideas/feedback about the iPhone go here: http://www.apple.com/feedback/iphone.html
    Developers use the PAN Bluetooth protocol for tethering and photo exchange/game playing between devices.
    iTunes Music no longer has DRM. I could be wrong but I do not believe the BT file transfer protocol can differentiate between the type of file that is being exchanged.

  • XML file transfer between ASP & JSP

    Hi !
    Actually the requirement is to provide an interface between an ASP application and a JSP application.
    What i could understand is that commonly used way is transfering XML files using SOAP.
    But, i have no idea on SOAP and need few clarifications.
    1. What are the roles of SOAP, WSDL and UDDI ? and does SOAP needs WSDL or UDDI and web services?
    2. Do i need to use web services just to transfer XML file from ASP to JSP ?
    3. is HttpURLConnection also used in this approach ?
    actually what my purpose is to know that to implement SOAP for XML file transfer what all i need to do ?

    Hi !
    Actually the requirement is to provide an interface
    between an ASP application and a JSP application.
    What i could understand is that commonly used way is
    transfering XML files using SOAP.
    But, i have no idea on SOAP and need few
    clarifications.
    1. What are the roles of SOAP, WSDL and UDDI ? and
    does SOAP needs WSDL or UDDI and web services?SOAP is a transfer protocol for exchanging structured and typed information : go to the w3 web site to understand better.
    WSDL are files to describe a web service : you will find inside an access point and signatures from your methods; if you want it's a little bit like an interface in java but with more informations. You don't need wsdl for soap.
    Last uddi is a repository for web services. You need to publish your service inside a Uddi registry and it's associated access point and tmodel (go to oasis web site for more informations). It's a little bit like yellow pages. You need to use Uddi only if you want to discover serviecs dynamically.
    Usually you use SOAP by calling a web services, as a web service is over the SOAP layer. The advantages of using SOAP is that it describes your data too. In fact if you have complex types to transfer between your two applications the partners have to know how to understand these data.
    2. Do i need to use web services just to transfer XML
    file from ASP to JSP ?Well, what do you want to transfer exactly between your applications. If this is just a text stream you can simply send your file by opening a socket. But if you want to work with your informations, to use them (that means you have to build the corresponding object) you could use web services as your informations are explicitely defined : what do you want to do exactly ? Last but not least if you have already XML file you can get your info directly and parse ir or ????
    3. is HttpURLConnection also used in this approach ?Yes you could call a servlet or something like that to transmit your informations
    actually what my purpose is to know that to implement
    SOAP for XML file transfer what all i need to do ?you have to be more precise with what you want to do with the info; simply display it or ???
    PA
    http://www.doffoel.com

  • Simple PRC file transfer between devices or via PC not so simple, sigh.

    Greeting, this is my first post so excuse me if I make some faux pas.
    I was unpleasantly surprised how difficult, almost imposible it is to take a [custom] PRC off one Palm device and put it on a second, even using a Windows PC as the intermediary.
    The devices use Palm 4.1 OS and are bar code scanners, SPT1800, made by Symbol and now legacy devices since Motorola bought them out.
    So one PRC is a tiny program that allows the main program to be downloaded via a network. Without this tiny program, can't get the devices to do anything.
    I tried terminal programs and what not. I can talk to the devices via COM1 and even 9600 n81, a simple protocol. They do have some kind of binary file transfer capability. But I cannot even get a Directory listing, nothing from the Palm device. That file capability is simple not there. Really surprised me.
    Desktop software is useless so far, from Symbol/Motorola. Have not tried Palm's but it looks almost identical and only allows PRC to be transferred to the device for installation, not vice versa.
    I am trying to avoid installing linux and using pilot-xfer only because that takes a couple of days before I can download and debug everything. But Pilot can make a backup of the Palm device, purportedly, any Palm device just about.
    Any suggestions? Pilot-xfer is still not ready for Windows?
    I am using Windows XP Pro with the Com1 port. I did try Telnet and a Terminal program but I cannot get the Palm device to do much.
    I guess they did this on purpose so the files can't be messed up?
    Anyway to just make a backup of the regular memory, not the ROM?
    I have emailed a few Palm service companies if they can sell me a program to do this but I doubt they will. We did send some Palm devices out to one of these companies and it's almost 2 months now. It's murder.
    Thanks, AdamPalm
    Post relates to: None

     Your references are appreciated. I look forward to testing this out. It's interesting how complicated this gets and all the little deadly false steps. For example, I use 98se and XP Pro mostly [Win 2000 and linux sometimes]. I shut down the serial ports. No problem I thought. I just open them up when I need COM1 and that particular IRQ.
    BIG PROBLEM NOW. Machine can't work now with COM1 in 98se. That IRQ is not moving back. XP PRO does not have this problem since presumably lots of IRQs and not used that much.
    This complete collapse of the computer with something as dumb as enabling/disabling COM ports in the BIOS has me gobsmacked. It's so bad it's funny. Never saw this problem before in all the various operating systems. I better not see this again. I might really go over to linux as soon as I figure out how to play all those proprietary formats that don't play in linux.
    What should take minutes will probably take days to sort out all the problems.
    Do others encounter this too? Sorry to whine but that's fun too.
    Thanks for all the comments fellow. Appreciated.
    Post relates to: None

  • Export/Import file ratings between computers

    I've tried to find a way to export and import file ratings between my laptop and my desktop. I have the photos stored on both machines. I take my laptop to the client and rate the photos. How do I copy just the ratings without having to copy the entire directory?
    I have Bridge CS4 on a Windows XP machine.
    I've tried copying the xmp files. I've tried exporting the cache. But neither of these give me rathings on my desktop.
    Anyone know how to do this?
    Thanks

    It depends on your type of files.For DNG, PSD, JPEG, TIFF and others, the rating is stored in the image file itself (like other EXIF, IPTC or XMP metadata).
    For most RAW formats, it may be stored in the XMP sidecar files. Have a look at your images with a tool like ExifToolGUI and look for the XMP field called "Rating". It's either in the image file or in the sidecar file. If it's in the image file, I'm afraid you'll have to either copy the images or find a way to export the ratings to a seperate (text-)file and re-apply from there, but I don't know how to do that.

  • File transfer between IMAC and Motorola RAZR V3c

    I recently replaced my defective Verizon RAZR phone with a new RAZR v3c. Previously, I was able to exchange music, video and pic files readily by dragging and dropping via bluetooth. The new phone pairs up w/ bluetooth but an error message appears stating the device "does not have the necessary services". Is there a way to transfer these files even w/o bluetooth if necessary? I've been reading for hours and haven't found a solution. Please HELP!! Thanks

    Bad news... Verizon disabled that "feature" of your phone. I guess they did it to try to force subscribers to buy more ringtones and use more data transfers. It might depend on the exact firmware version. There's some info on it here:
    http://blog.wired.com/music/2006/07/verizonrazrca.html
    And a (somewhat daunting) wiki tutorial on how to replace the Verizon $oftware with the original phone software from Alltel:
    http://wiki.howardforums.com/index.php/MotorolaV3c_Tutorial:_Flashing_to_Alltel_UserInterface
    Oh wait, just found this... apparently you can take it to a Verizon store and have them update the firmware:
    http://www.gizmodo.com/gadgets/cellphones/verizon-finally-enables-file-transfer- bluetooth-on-motorola-razr-v3c-168533.php

Maybe you are looking for