Display Bank Account Type on Banks Overview

Hello,
I am on EP7.0 ERP05 NW04s and want to add a field Bank Account Type on the ESS Bank Overview Page under Account Number ...I tried the follwoing code in the Bizcard overview page -- wdDoModifyView method
String bizcardField1 = wdThis.wdGetAPI().getComponent().getTextAccessor().getText("BizcardField1");
String bizcardField2 = wdThis.wdGetAPI().getComponent().getTextAccessor().getText("BizcardField2");
String bizcardField3 = wdThis.wdGetAPI().getComponent().getTextAccessor().getText("BizcardField3");
String bizcardField4 = wdThis.wdGetAPI().getComponent().getTextAccessor().getText("BizcardField4");
String bizcardField5 = wdThis.wdGetAPI().getComponent().getTextAccessor().getText("BizcardField5");
//Code to add field Bank Account Type on the Overview Page
fieldInfo = new BizcardFieldInfo[] { new BizcardFieldInfo(bizcardField1, "Emftx"),
new BizcardFieldInfo(bizcardField2, "Banka"),
new BizcardFieldInfo(bizcardField3, "Bankn"),
new BizcardFieldInfo(bizcardField4, "Bkont")
When I actually run this code I get the field Account Number type but with a number as 01 or 02 ,this is because in the backend it is stored like that, ...what;s the way to show Checking or Savings rather than numbers...
Any help would be highly appreciated..

Sharadha,
Actually I modified the Overview Helper.java file in ess~per application at the time when the Text is set for the TextView like :
if(fieldText.equalsIgnoreCase("01"))
textView.setText("Checking");
else if(fieldText.equalsIgnoreCase("02"))
textView.setText("Savings");
else
textView.setText(fieldText);
but still it shows up as 01 or 02 on the page...
Please help.

Similar Messages

System is showing some Incorrect Header text in Display Bank account Pharse

Dear all,
I am having an issue with the client.
The client says some incorrect text ( Header text ) is deternined for one billing delivery invoice number in VF03, the text type for this Invoice number is bank account phrase.
But the text maintained in the system is different ( in Display Bank accnt phrase ). I think there is user exit in the text determination
so i need to debug & find out which text id the system is determining.
Plz guide me guys wat to do.
Edited by: PI User on Nov 29, 2010 6:40 PM

Dear all,
I am having an issue with the client.
The client says some incorrect text ( Header text ) is deternined for one billing delivery invoice number in VF03, the text type for this Invoice number is bank account phrase.
But the text maintained in the system is different ( in Display Bank accnt phrase ). I think there is user exit in the text determination
so i need to debug & find out which text id the system is determining.
Plz guide me guys wat to do.
Edited by: PI User on Nov 29, 2010 6:40 PM

Bank Account Types

Hi All,
I need your suggestion regarding the Account type filed in Bank Accounts Screen.
Navigation for it is : Payables responsibility ->payables-> banks-> bank Accounts.
The field is "BANK_ACCOUNT_TYPE". Actually it is a free flow text. My requirment is that i need to add a list of values or validate the values entered by users. How could i achieve it?
Is that possible for me to add a List of values for the field through Personalisation?
Please suggest me some solution through which i could achieve it?
Regards
Santhosh

Hi, try to add a LOOKUP_TYPES
Payables Manager  setup lookupspayables
Query “ACCOUNT TYPE” and try to add new code, otherwise adapt existing code.
Test all.
Regards
S.M.

Displaying Accounts and Account Type in Excel

We have associated "Account Type" attribute to GL_Accounts Dimension so that they can appear as two separate columns in Excel. Is there another way to do this without using Attributes? For example, in excel, we are able to pull : GL_account Account Type 1011 Cash 2000 Inventory 

Indeed, two siblings may not have the same name (nor the same alias). You may have to consider using attributes on your Accounts dimension members which, of course, demands that the Accounts dimension is sparse. This potentially complicates calculation order, dynamic calcs, second passes, etc. By the way, are these accounting-savvy people? It seems strange to me that an accountant doesn't understand which account type each account is without providing an on-screen reference.

EBS - Posting Area 2 no longer determines Account type & GL account

Hello all,
I'm looking for some help/advise on Electronic bank statement processing. I suspect this has been caused by upgrade to EHP6, but I have not found any notes to help me.
Relating to inter-company payments.
We have an issue where posting area 2 is no longer determining the Account symbol & account type based on a search string, which results in error message F5 263 - difference too large for clearing.
This then means the team have to manually post process these items, where as before this was automatic, obviously they are not happy.
The search string is still working as I can see the correct internal transaction has been determined when reviewing the item in FEBA that should have posted automatically.
Prior to the payment coming through on the bank statement the finance team post a DZ customer clearing document with credit entry posted to a sub GL bank account, this document quotes the payment document number in the XBLNR reference field.
Through debug I have found that POST_INTERFACE_CLEARING is not receiving the GL account or the Account type when it gets to the FB05 screen to search for the related item to clear in the sub GL.
Anybody else encountered this & found a way to fix it?
Thank you
Steve

Hi Raghav,
Thanks for the advice, I had found this note during my search but I'm not convinced it is the answer.
Our search string rule is set to use All interpretation algorithms & I've run the bank statement with the ranges for BELNR & XBLNR specified. I don't want to have a GL tolerance & posting to an alternative account as that changes the business process & would require a new GL account for this purpose.
I just want it to behave like it did before EHP6.
Steve

Problem in accounting type m

hi Co Guru...
when i do GR with t code mb31 movement type..101..
showing the message..
mesage type; F5714..
ACCOUNTING TYPE M AND G/L ACCOUNT WITH OPEN ITEM MANAGEMENT NOT PERMITTED....
PROCEDURE...
CHANGE THE MASTER DATA FOR G/L ACCOUNT 3900 IN COMPANY CODE V3& ACCORDINGLY..
kindly plz suggest me...
Thanx
regards

Hello Aqueel,
Account type M and G/L account with open item management not permitted
Message no. F5 714
Diagnosis
Account type 'M' and G/L account number '#########' (company code '####') have occurred in a certain
line item. The G/L account is run with open items.
System Response
This combination is not permitted in the financial accounting application.
I check in tcode FS00
'Control Data' tab.
Account Management in Company Code
Open Item Management (please review the F1 help on this field)
F1 Help.
Indicator: Open Item Management
Determines that open items are managed for this account.
Use
Items posted to accounts managed on an open
item basis are marked as open or cleared.
The balance of these accounts is always
equal to the balance of the open items.
Examples
Accounts that ARE managed on an open item basis include:
Clearing accounts:
Bank clearing account
Payroll clearing account
Cash discount clearing account
GR/IR clearing account
Accounts that are NOT managed on an open item basis:
Bank accounts
Tax accounts
Raw material accounts
Reconciliation accounts
These are managed implicitly using the subledger open item function.
Profit and loss accounts
Materials Management (MM) accounts posted with a posting key that has account type M
My understanding from this is that the 'Open Item Management' is not to be used for Materials Management.
Cheers,
Daniela

Define a DFF depending on account type and OU

Hi!
I am updating the standard payment format for Swedish BG payments and need to store an information in the DFF "Bank accounts" (AP).
However I need to have this DFF available only for the Swedish OU and only if the account type is "Supplier".
Any hint?
Thanks in advance!
//BR
Karima

karima plztel me naaaaaaa dff means wat!!!!DFF = Descriptive Flexfield

Display gl account field

Hi Consultant,
Can anyone advise me the field below in fs00? i check in F1 but still not clear.
1) what is valuation group under control data tab?
2) what is recon account ready for input under create/bank/interest tab?
3) what is interest calculation for?
Thanks

HELLO
valuation group can include a number of different G/L accounts. The exchange rate type is determined from the foreign currency total when the valuation is carried out.
RECONCIATION ACCCOUNT FOR ACCOUNT TYPE IS FOR LINKING THE MAIN LEDFER TO THE SUBLEDGER ACCOUNT.
HOPE THIS WILL BE HELPFUL
REGARDS

OB53 and account type X in FS00

Hi,
I would like to have better understanding on the relation between these 2 settings:
Let say, my system's setting is as follows:
OB53: X - GL 99999
FS00: GL 89999 (P/L GL) marked with account type X
Other GL's, like Bank: 11300, Expenses (Water): 416300
Initially, I started up my business with capital EUR200
Let say, my current year transaction is payment of water EUR100 (one expense), and does not have other revenue / expense.
Therefore, my current year Profit and loss account should be, loss of EUR100.
My balance sheet in EUR, should be as follows:
Asset:
Bank: 100
Liability:
Capital: 200
Loss: (100) - retained earning
My question, how should the system make use of GL99999 and GL89999?
Anything to do with Tcode: FAGLGVTR?
Thanks in advance.

Hi,
In OB53, we have to assign Retained Earnings A/c. It is nothing but Profit and Loss A/c in general terms.
In your example, you have given GL A/c number 99999 in OB53. That account is called Retained Earnings A/c or Profit and Loss A/c.
After assignment in OB53, go to go FS000 and create the Retained GL A/c for the same number which you have given in OB53 i.e. GL A/c 99999.
While creating Retained Earnings A/c in FS00, select your account group (Its may be Reserves and Surplus group) and select Balance Sheet a/c.
At the time of running F.16, all types of u201CP&L Statement Accountsu201D (This indicator should be selected at the time of creation of GL Accounts in FS00) balances should be carried forward to the Retained Earnings A/c which you have given in OB53.
Retained Earnings A/c shows the net results i.e. either profit or loss. In your case, it shows a loss of Rs.100.
Note: We need not post anything manually to Retained Earnings A/c. It will automatically be posted at the time of running F.16.
Difference between T codes: F.16 and FAGLGVTR.
We can use T code: F.16 when we are maintaining GL Accounts in ordinary Financial Accounting ---> General Ledger Accounting.
We can use T code: FAGLGVTR when we are maintaining GL Accounts in New Format. That is Financial Accounting (New) -
> General Ledger Accounting (New).
Hope this helps you.
Regards,
Kannusamy S

Transaction Account Types

Hi All,
we are planning to use Transaction account builder to derive default accounts in AP and AR , But we dont find the Transaction account types already defined .
In the user guide we find that Transaction account type has to be created by the developer but we dont find the procedure to do that.
It will be helpful if we get guidance in this
Thanks,
Lakshman

In the global configuration for EBS, you map external transactions to internal transactions (posting rules) within a transaction type. You then assign each bank key and bank account combination to the transaction type that should be used for processing statements for that account. If you want different external transaction mappings for different account IDs, then you need to create different transaction types and assign each account to the relevant transaction type. Since the transaction types are assigned to the account numbers, you can have different transaction types for accounts with the same bank key.
Regards,
Shannon

Period 001/2010 is not open for account type S and G/L 799999

Hi friends
I am in SD. I am trying to create stock for newly created material, movement type 561. system give error Period 001/2010 is not open for account type S and G/L 799999.
I use the T. Code OB52, i am confuse which combination i.e. variant, A, from Account, To Account, from per. 1 Year, To period, Year, from per. 2 year, To Period, Year, I should choose, can some one send me detail reply and solution which may display after this t. code OB52. I also have questin which movement type i should use.
Using T.Code MMPV, i have created new period (from company code 1000, To Company code 1000, period 01, Fiscal Year 1020.
I was reading previous solution, one of them was i should close period 2009. I tried to do this using using MMPV, i entered fiscal year 2009. Error display The specified year 2009 is not the current calender year.
Thanks
Raj

Hi
Hope you are doing this in test server
If this is a real time issue this needs to be addressed by a FI consultant
First see for your company code what is the posting period varient maintained in OBY6
Say if it is 1000
Then in OB52
Maintain a setting like this
1000-S-BLANK-ZZZZZZZZZZ-1--2010122010-13--201016--2010
Then save it
This is for Account type S that is GL accounts
Preferably maintain the same for A, + , D, K, M, V
Regards
Raja

Account group and Account Type.

Hi all,
Could you please tell me the diferences between GL Account group (by example cash, expense, revenue ....) which we define in IMG - Financial Accounting - General Ledger Accounting - G/L Accounts - Master Records - Preparations - Define Account Group and Account Type (by example: Vendor, Customer, Material, GL Account) which is in the screen "create account type" IMG - Financial Accounting - Financial Accounting Global Settings - Document - Document Header - Define Document Types ?
Thank you very much.
Sylvecast

Hi
Account Group Controls the Master records. It controls the number range of Master record and Field status group (Supress, Required, Optional and Display) also. SAP follows a Grouping principle all throughout SAP to handle the Master Records that may be in GL, AR AP any thing. See to create a GL Account group you define at OBD4 there itself you assign the Number Range or those groups which also controls Field Staus of GL Master Records. And for Creating AR and AP Master Records you create at OBD2 and Vendor at OBD3 which will also controls Field Status Group of And Number range of Master record. The only difference between GL and AR/AP is assigning of number range. For GL will specify at OBD4 itself but for AR/AP we need to create a number range at FBN1 then assign to AR And AP at OBD2 and OBD3 respectively.
One more thing. Remember only Field Status group of Master recard (OBD2, OBD3, OBD4) only contain Display option but not to Posting Key or Field Satus Group (OB41 or OBC4). I am so specifing becoz I commited this mistake in one interview.
In summary, the account group controls:
i) The number ranges of the accounts,
ii) The status of the fields in the company code segment of the master record. Since a chart of accounts contains many different types of accounts, they can be bundled into different "account groups ". Usually one account group bundles
accounts with the same tasks within the general ledger, e. g. cash accounts, material accounts, asset accounts, profit and loss
accounts,...
Surendra

Opportunites in Future are not displayed in Account application

Hi,
Opportunites having start date in Next year are not displayed in Account-> Opportunities assignment block. Is there any SPRO activity to control this?
Best Regards,
Roshan

Hi,
Refer note 1548585 - Business Transactions in the Account overview for the previous year are not found with the actual year
Regards

Significance of Account Type EXP,LEQ,INC,AST in BPC- Need some valid reason

Hi,
I have a question why we need account type in BPC. Is there really any Business significance for maintaining Account Type ?
Account type LEQ, INC it behaves differently while load data/display data as sign change happens in SAP Back end. Major issue comes when you try to create a re-concillation report using BEX tool for LEQ, INC accounts in BPC and BI cube as you need to reverse the sign in BEX side for any calculation or any data match for INC and LEQ accounts.
My implication is : Is there anything wrong if we take all accounts as EXP account type because what data comes from other source/Input schedule remain as such for all accounts. There will be no Discrepancy/confusion of sign while in reporting in BI side or BPC side. You can follow normal calculation process if you have calculated any item in the report and does not bother about the account type and behaves same as the BI cube data.
Any idea or any issue if the above implication is implemented. I need some concrete reasons for the above issue as it create a extra headache/confusion in BPC impementation project.
Thanks
Debasisha

Hi Debasish,
Lets take a simple example. Lets say you have revenue as INC, sales as EXP and Profit as INC. You enter values from input schedule as below
Acct    Type    Value entered in IS      Value in DB
Revenue   INC   400                   -400
Sales   EXP     100                  100
Lets say Profit is the parent, then the values will be
Profit   INC   -300
In the report, you will see the data as 300 (since profit is of type INC).
However, if you keep all as EXP, then
Acct    Type    Value entered in IS      Value in DB
Revenue   EXP   400                   400
Sales   EXP     100                  100
Profit    EXP                             500
The above data, as you can see, is incorrect. Now, for making it correct, you need to put a formula for Profit as Revenue - Sales. This looks easy, however, will become cumbersome with more number of members.
Hope you got the idea now.

Essbase API - Account Dimension - Account Type

Hello all,
I'm connecting to a cube that has an account dimension and I need to extract the account hierarchy for a given member name. What I did to get the member information is:
mbrSel = cube.openMemberSelection(null);
mbrSe.executeQuety("<OutputType Binary <SelectMbrInfo(MemberName, MemberAlias, ParentMemberName )"
, "@IDESCENDENTS (\"" + s_member + "\", 0)");
Now what I'm trying to get from this query is the account type(or the account aggregator). Is this information queryable?
Many thanks!
Rafael

In BPC, "Account" can be interpretted fairly generic. Yes each application requires an account dimension and each account dimension member must be assigned a valid account type (Asset, Liab, Equity, Rev, Cost) property. But that is the extent of the restrictions. So in is not uncommon to see the account dimension be used to represent the vendor, the customer, the material, or a key figure. That last option may be necessary if you want to track "statistical key figures" or various types of quantities in your application. Just be sure to utilize the right account type attribute assignment to result in the correct sign handling and accumulation logic for your data.
Best regards,
[Jeffrey Holdeman|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/jeffrey+holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group

Display Bank Account Type on Banks Overview

Similar Messages

Maybe you are looking for