Display Char Status Values

Hi BW Wizards,
I have a query which I run by calendar month/year via a variable. The query runs off a multi-provider and is restricted to two info-providers. I would like to show the Status values for each info-provider by month per ID.
The problem is that Status is a Char and so are all the other info-objects used in the query. I would like to show the status values which are alphabetic- they are not numeric. The query is defined as follows:
Rows
1. Calendar
2. ID Number
Columns
Info-Provider
Status
I get blanks in the white result value cells as I am not using a Key Figure. I know I can set a counter by using a formula selection but I actually need to see the values for status per cal date and ID....this could be a status value of A, C, D etc which all represent a meaning in business.
How can I achieve this?
Thanks
DV

HI Venkat,
This is a good suggestion and a correct one, but actually I did this but the users would like the status in the columns, I tried this but the ID must then also go in the columns and causes a scrolling problem. This is due to the fact that we have 40000 IDs in a monthly report and if they go in the columns its difficult to easy look through the report as opposed to if they were going down the rows.
Do you know how I could provide them with what they need.
Thanks
DV

Similar Messages

How can I display char if a variable is null

Hi All,
How can I display char if a variable is null in sap business object
item name
Office Visits
Non-Emergency ED Utilization
Non-Preferred Pharmacy
above items are value and they are populating for this month but form next month "Inpatient Stays" a new item will add at database level
i want to display this item with current month
final result should be
item name
Office Visits
Non-Emergency ED Utilization
Non-Preferred Pharmacy
Inpatient Stays
i have tried with ISNULL function but it is not working
please help i am using SAP BO 3.1
Thanks in Advance
Ranjeet

You should be able to findout NULL using isnull([object]) function.. at report layer..
Try with the below formula which should work for you
=If Isnull(trim([object])) then "Inpatient Stays" else [Object]

How to display the status of a SubVI on the front panel?

Hi,
I am writing a program to control an instrument through a serial communication port. The control and communication functions are integrated in a SubVI and they work fine.
In the front panel of the main VI, I want to add some indicators to display the status of those controls in real time, such as using some LEDs to show whether the program is running in some loops of the SubVI, or use some indicators to show some variables in the SubVI.
I tried using global variables, but I can't make them work in real time (or maybe I didn't do it right). The values of the global variables are actually changing on the fly, but the indicators on the front panel wouldn't reflect those changes until the program return
ed from the SubVI.
Is there a way to do this in Labview 6.0.2?
Your earlist help is very much appreciated.
Best regards,
Hua

Hua,
I have attached an example in which a front panel boolean indicator is toggled in the subvi. Also, a front panel stop button is used to stop the loop execution in the subvi. References are passed to the subvi instead of the actual control values.
Without seeing your code I'm not sure what was going on with the globals, but you had to have a data dependency somewhere which was keeping the code from running until after the execution of the subvi. The code must be totally independent of the subvi in order to run. Also, in order for the update to work it would have to be operating in a loop.
Attachments:
Main.vi ‏13 KB
subvi.vi ‏20 KB

How to Get input from User and Display it's Value

Hi ,
I need to get 2 inputs from user and to display it's Mutilple Value.
The Below Code is working fine to get 2 Input's from user,but it display a Junk value as a Result .How to
overcome this Problem. I need to display it's Mutilple(a*b) value of "a " and " b".
import java.io.*;
class Mul{
static int a=0;
static int b=0;
static int Count=0;
public static void main(String args[])throws IOException{
BufferedReader br =new BufferedReader(new InputStreamReader(System.in));
do{
a=(char)br.read();
Count++;
b=(char)br.read();
if(Count==2)
System.out.println("The Multiplied Value is "+a*b);
}while(Count<2);
}

Changed to Integer but still the problem persists.
import java.io.*;
class Mul{
static int a=0;
static int b=0;
static int Count=0;
public static void main(String args[])throws IOException{
BufferedReader br =new BufferedReader(new InputStreamReader(System.in));
do{
a=(int)br.read();
Count++;
b=(int)br.read();
if(Count==2)
System.out.println("The Multiplied Value is "+a*b);
}while(Count<2);
}

In service order Search page,In Service Order Search criteria, In Status value drop down i have to show only user status?

Hi Team,
My requirement is In service order Search page,In Service Order Search criteria, In Status value drop down i have to show only user status values only? how to do it..now in my status drop down values system status values also displayed ,i want only user status values only i have to show...how to do it?
Thanks
Kalpana

Hi Kalpana
As Standard there are 2 separate search fields for Status.
One for User Status
One for System Status
Are you sure that the other Status value you require are not for other Service Transactions different to the one you are wanting to search on?
If you need to make a only the User Status for a given selected Transaction Type, then you would need to make an enhancement to that Component
Regards
Arden

Displaying Summary Column Values

I have just learned about summary columns in Developer 2000...But I can't complete the task...
I'd like to display the # of records for each value in the status column of my report. I have created the break group with Status column. Then I added a summary column choosing function: "count", source: Status, and reset at: g_status (at the group level).
What should I do next? I'd like to display counts of records (for each status value) in a separate field? How do I filter each status set? Do I need to create a separate summary column for each possible value of status?

Hello,
Is this what you are trying to achieve?
rows:
record_id Status
========= ========
rec01     Active
rec02     Closed
rec03     Pending
rec04     Active
rec05     Closed
rec06     Pending
rec07     Active
rec08     Closed
rec09     Pending
rec10     Active
rec11     Closed
rec12     Pending
rec13     Closed
rec14     Pending
rec15     Closed
output:
Active    4
Closed    6
Peding    5If so, you will need two groups, one for the Status, and another for the records.
Then, create a summary column in the status group of function 'count' and the source = record_id, and reset at g_status.
Then, in your report layout, have a repeating frame with source = status group.
Inside that repeating frame create 2 text items, one for the status text and another for the status summary.
-Marilyn

How to display only Day value instead of DATE in Bex Report

Hi Experts,
We have a Month to date Report, in this report we need to display only day value instead of DATE value,
Like
if Date is 14.05.2010 we need to show only 14
Regards,
Chandra

Hi ,
Thanks for Quick Response
we does have the option to create the char(calday or ...) value variable replacement with char (calday or ...) info object, we can replace with Report r variable value only not with info object.
i hope we can replace the with info object only with formula variable with replacement.
My BEx Report is Designed like
Columns
0Calday
Rows
Plant
Keyfigures
Actual
Plan
Report output Looks like month to date
0CALDAY            01.06.2010   02.06.2010 03.06.2010
P1 ACTUAL            10                     8                    4
P1 PLAN                 15                     6                    2
P2 ACTUAL              5                   10                     7
P2 PLAN                  4                      8                    3
Report should be
0CALDAY            1    2     3
P1 ACTUAL      10     8      4
P1 PLAN           15     6     2
P2 ACTUAL        5    10    7
P2 PLAN            4      8     3
please let me know how can i achive this
Regards
Chandra

Display Javascript array value OnChange instead of Bean value

I intially loop through a collection of employees display the values within the employee loop I have a select statement that i loop through a collection of programs that has on OnChange. I want to display the javascript value instead of the bean value onChange. The following code displays the bean value initally and onChange it displays both because the if is never false?
*<c:if test="${programs[programIndex] != emps.department}">${emps.department}</c:if>*
* <div id="programText"> </div>*
* <input name="department" type="hidden" id="department">*
JSP page
<jsp:useBean id="programs" scope="request" class="java.util.Collection"/>
<jsp:useBean id="employeeList" scope="request" class="java.util.Collection"/>
<script language="JavaScript" type="text/javascript">
var programs = new Array();
function setProgramFields() {
nameField = document.getElementById("programList");
idx = nameField.selectedIndex;
emField = document.getElementById("programText");
emHiddenField = document.getElementById("department");
emField.innerHTML = programs[idx];
emHiddenField.value = programs[idx];
<c:forEach var="emps" items="${employeeList}">
<td width="170px">
*<c:if test="${programs[programIndex] != emps.department}">${emps.department}</c:if>*
* <div id="programText"> </div>*
* <input name="department" type="hidden" id="department">*
</td>
<td width="275px">
<div class="selectBorder">
<select name="programName" type="text" class="searchProgram" id="programList" onChange="setProgramFields()">
<c:set var="programIndex" value="0"/>
<c:forEach var="sp" items="${programs}">
<c:if test="${sp.programName == emps.programName}">
<option value="${emps.programName}" selected="selected">${emps.programName}</option>
</c:if>
<c:if test="${sp.programName != emps.programName}">
<option value="${sp.programName}">${sp.programName}</option>
</c:if>
<script language="JavaScript" type="text/javascript">
programs[${programIndex}] = "${sp.department}";
</script>
<c:set var="programIndex" value="${programIndex + 1}"/>
</c:forEach>
</select>
</div>
</td>
</c:forEach>
Edited by: kmb_ms on Sep 15, 2008 2:38 PM

Apologize for not formatting the code. I used the status.index the code as suggested. The code if more efficient but the results are the same and I still have the same problem.
<select name="programName" type="text" class="searchProgram" id="programList" onChange="setProgramFields()">
<c:forEach var="sp" items="${programs}" varStatus="status">
<c:if test="${sp.programName == emps.programName}">
<option value="${emps.programName}" selected="selected">${emps.programName}</option>
</c:if>
<c:if test="${sp.programName != emps.programName}">
<option value="${sp.programName}">${sp.programName}</option>
</c:if>
<script language="JavaScript" type="text/javascript">
departments[${status.index}] = "${sp.department}";
</script>
</c:forEach>
</select> How can I access the value of the array to compare with the value of the bean.
<script language="JavaScript" type="text/javascript">
var departments = new Array();
function setProgramFields() {
nameField = document.getElementById("programList");
idx = nameField.selectedIndex;
emField = document.getElementById("departmentText");
emHiddenField = document.getElementById("department");
emField.innerHTML = departments[idx];
emHiddenField.value = departments[idx];
</script>The following code displays both the value of the bean and the value of the array onChange b/c the if statement is always true???? This is where I need help.
<td width="170px">
     <c:if test="${departments[idx] != emps.department}">${emps.department}</c:if>
     <div id="departmentText"> </div>
     <input name="department" type="hidden" id="department">
</td>

Not to display the null values from data base

Hiiii.
In a jsp file i have ten check boxes.The jsp file is mapped to a servlet file for parameter requesting and to
store it in DB.
The unchecked box values has null values.All the values are store in a Mysql DB table.
Again i have to display it in a jsp page from table.
The problem am facing was,how can i display only the values in a row.it must not display the null values and the crresponding column name.
Or any other way is their like below
How i can retrieve only the selected check boxes from tht jsp file.and store in backend.
Thanks in Advance
regards,
satheesh kannan

Here is a rough example that may give you some ideas:
On the JSP page:
<%if(myData.getFirstName()!=null){%>
Your First Name'
<input type="text" name="firstName" value="<%=myData.getFirstName()%>">
<%}%>
In the servlet:
String firstName= request.getParameter("firstName");
if(firstName!=null){
//write it to the database
}

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

CHAR's value in the query but not in the report??

Hi all,
I loaded master data and crm transaction data from ODS to Cube. The data is in the cube but there is no value in my report when running it. EX: there are some CHARs in my report, I checked those CHARs have value in the query but it shows 'not assign' in my report when I run it. What happen?
Thanks.
J.

Please see below text and also the sent link..
If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
cheers,
Vishvesh

Display of missing values in a table view.

Hi everyone,
I have a table view with 7 columns and 10 rows which displays only those values which are missing in the DataBase Table.
Is it possible to show only the missing values as '-' in a table view, the table view is having 7 different fields.
Also when the value is inserted at run time the corresponding field should be updated accordingly and the value will no longer be displayed in the table view as '-'
please advice.
Regards
Neo.

Welcome to SDN.
do you mean to say that in some rows some column values will be blank and you want to replace the blanks with '-'.
loop thru the itab which you are passing to tableview and for the blank cells pass '-'.
<i>Also when the value is inserted at run time</i>
so you are having editable tableview. to update the value back to the dbtable, you have to read it in oninputprocessing and update it to dbtable .
search the forum on how to read the user entered value from the table view so that you can update the dbtable.
Regards
Raja

How to prevent a text in script from displaying if its value is zero

Dear all,
How to prevent a text in script from displaying if its value is zero
for eg   Price = 0.00
if price is 0 it should'nt appear in output.
I tried with    if price ne 0.
                   price = &price&
                    endif.
but it's not working.
Regards
Raj
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 8:59 AM

Hello Nagaraju,
                       What you were doing is partially right.
The correct format to write in the script is as follows :
/: if &PRICE& ne 0.
&PRICE&
/: endif.
This should work. Let me know how it goes.
Nayan

Display Char Status Values

Similar Messages

Maybe you are looking for