Display chart via express vi - deletes first loop run

The issue I have in this vi , is that I didn't want the second chart to be deleted, I'm recording in the
2nd sequence.
I'm working all the time in the same xy-graph, so is my first chart being erased when going into the
2nd sequence ?
Would be glad if you have an answer.
stefan
Attachments:
express_graph.vi ‏169 KB

Nevertheless I finally can't realize a continuous displaying of my 2 functions inside one
xy graph window.
I want to write this as only one line in a graph - so I don't really want to distinguish between
counting up and down from the graph point of view.
But the issue in the following example vi is, that I don't know how to link the express vi and
the xy-chart output so that the programm is writing me the calculated x and y values in one
chart one by another without being deleted during the runtime of the programm.
Right now I'm getting the first fuction during counting up, after that the consistence is being interrupted... and even the values which have to be calculated later on during runtime seem to be there, before they are calculated - really confusing.
Would be glad to get some hint from you....
Attachments:
simulation_graph_1.vi ‏209 KB

Similar Messages

My computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized

My computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized on list along with all my neighbors. Any help would be greatly apprectiated.

System Preferences > Network
WiFi/Airport should be at the top of the list.
Select WiFi/Airport
[√ ] Ask to Join new Networks
click ( Advanced )
In the WiFi/Airport pane, remove ALL other networks except your home Network. (This will keep your computer from "wandering off" onto a neighbor's Network.)
You are not done until you close the windows and Save Changes.

Got Display driver via Windows Update for Windows 8.1 and try to use it for Windows Server 2012 R2

Hi Everyone,
the following driver cab is from Windows Update:
https://onedrive.live.com/?cid=5be01620eea95d8c&id=5BE01620EEA95D8C!138&ithint=file,.cab&authkey=!APDi54-R1Ob5IWQ
It includes this display driver:
Intel(R) Q45/Q43 Express Chipset (Microsoft Corporation - WDDM 1.1)
My problem is: I can't install this driver on Windows Server 2012 R2.
I tried the following, nothing worked:
a) pnputil -i -a intel.cab
b) Extract cab, update the device's driver in device manager, select "search for driver software in this location"
c) copy the files in system32/, system32/drivers, syswow64/ from a Windows 8.1 system to a Windows Server 2012 R2 system
Isn't it true that any Windows 8.1 driver should also work for Windows Server 2012 R2 (same os version)?
Thanks for your replies.
PS: I first posted my question here:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/got-display-driver-via-windows-update-for-windows/31c287c8-ef84-4c81-8530-8c51412376b7

Hi,
Additionally, did you check this article?
http://www.driveridentifier.com/scan/download.php?item_id=90475670&scanid=9B44546E3BB9410D877D9A90D1439AF8&hardware_id=PCI%5CVEN_8086%26DEV_2E12
Regards.
Vivian Wang

How to display chart region based on select list in html region ?

Hi all,
i'm using 4.0.1.00.03 apex version,in a page i have 2 regions one is html and another one is Chart region.in html region i have a select list and button.when user sign into my application select list have some values in that page,user select's a value and clicks on the button then chart will be displayed.my query is when user first sign into my application i want to dispaly chart region when only select list is selected and clicks on the button.can any one guide me on this.
thnx in Adv.

Hi yann,
thnx for ur reply,
i have done what u have written but i didn't meet my requirement..
let me explain what i need exactly
as of now my application is like this..
i have a html region in that i have select list(P6_LIST) and go button
and chart region.
chart query is like this..
SELECT your_value
FROM your_table
WHERE your_value = :P6_LIST
AND ...
how it is working??
when user sign into my application, user can see html region with 'select list and go button' and chart region with 'no data '.
when user select a value in select list and click on go button automatically chart region will be dispalyed with chart.
what i wanted to change is..
when user sign into my application, user can see html region with 'select list and go button' and no chart region
when user select a value in select list and click on go button then only user can see chart region with chart.
plz help me how to do it.. :)
thnx in Adv.
Edited by: moulani on Nov 4, 2011 12:05 PM

9i Discoverer Server Unable to display Charts

We have a Sun Solaris installation.
9ias 9.0.2.0.0
9.0.2.39.1
Trying to view graphs made in plus on the viewer, we get the following errormessage.
Warning
Diagramm could not be generated.
The Error log includes further Information. (Please contact the Systemadministrator.)
9i Discoverer Server Unable to display Charts
Has anyone installed 9i Discoverer and tried to view charts?
The sample workbooks open fine, but they won't display any graphics saying "Unable to generate charts" and that the log file will contain more information.
I checked the application.log in $OH/j2ee/OC4J_BI_Forms/application-deployments/discoverer/OC4J_BI_Forms_default_island_1
This is the only error I see, and it happens each time I open a workbook with a chart in it:
6/3/02 11:59 AM web: oracle.discoiv.Disco4iv: java.lang.NullPointerException
6/3/02 11:59 AM web: oracle.discoiv.Disco4iv: Discoverer error: java.lang.NullPointerException
at oracle.discoiv.state.DataAvailableState.getExportFormat(DataAvailable
State.java:394)
at oracle.discoiv.state.DataAvailableState.getData(DataAvailableState.ja
va:77)
at oracle.discoiv.state.StateMachine.getData(StateMachine.java:128)
at oracle.discoiv.controller.DiscovererController.getData(DiscovererCont
roller.java:262)
at oracle.discoiv.servlet.DiscovererHttpHandler.processRequest(Discovere
rHttpHandler.java:110)
at oracle.discoiv.servlet.DiscoServlet.doRequest(DiscoServlet.java:314)
at oracle.discoiv.servlet.DiscoServlet.doGet(DiscoServlet.java:148)
Does anybody know what
Thanks
Torben

See if you can upgrade to patch .53. This solved a lot of problems for me (although I did not encounter the one you report).
Available via Metalink.

Ship Via Express vs Standand

Does anyone know if Ship Via Express is USPS, UPS or FedEx? How much faster is Ship Via Express than Ship Via Standard?
G5 2GHz Dual Mac OS X (10.4.6)

I don't remember exactly where they were shipped from by near Sacramento sounds familiar. The soft cover medium come in envelopes and the first was scrunched into the mail box. It didn't crease the book but could have. The large book, if shipped similarly probably would have been creased knowing how some other large envelops have been added to our mail box in the past.
The medium's quality was sub par if you compare to the large hard cover. The half tone/dither pattern was obvious to the naked eye at close range. For the intended use, a memory book for each grandkid of a day at SeaWorld with the grandparents, it was perfect. So "quality" is really a matter of intended use and expectations.
Will be interested to see how the medium books turn out now that we're at V6.

Waveform charts slowed down control system while loop

Hi
In my application, I have control system which i acquire data, process and output the result. I placed some waveform charts in the while loop where i acquire data, process and output. This made while loop to miss data points( late). Is this because waveform charts store data as time passes?

Waveform charts store data in a history buffer of configurable size. You can change it to a smaller number.
What is the size of the history buffer?
How many charts are you updating in your loop?
What else is happening in your loop?
How are you updating them (wire, local variable, value property, etc).
How fast is your loop rate?
Are your plots simple (thin lines) or fancy (e.g. large dots and thick lines)?
Is autoscaling on or off?
Are the charts set to "synchronous display" by accident?
How many traces are on your chart?
What is your LabVIEW version?
What is your OS?
Do you have overlapping elements on the front panel?
Could you attach a simplified version of your code so we have a better idea what you're actually doing?
LabVIEW Champion . Do more with less code and in less time .

How do Dual Monitor with my Mac Book Pro (Boot camped with Windows 8) through my mini display port VIA Thunderbolt to a iMac (Model Mid 2011)?

So I have a Mac Book Pro with a bootcamp Windows 8. I dual monitor on the Mac side with my Mid 2011 iMac through my mini display port via thunder bolt cable. In my perfect world, I would be able to switch to the Windows side and have the iMac mirror or extend my windows display for my gaming pleasure, etc. I'm not sure if it's just a simple driver or that it cannot be done. Please help. Thanks.

so you want the notebook forum, not this one
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Is there a way to create a fade only for the first loop?

I have a loop (Modern Guitar Rock 04), which I've extended out so it repeats four times. I select the Fade Tool and X-Fade for drag. I then drag just in front of the loop and onto it, which creates a fade. However, this also creates fades at the beginning of the repeating loops. Is there a way to create a fade only for the first loop?

The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

Assigning a Data Source to a Chart via JavaScript

Dear all,
Is it possible to assign a Data Source to a Chart via coding ?
something like :
CHART_1.setDataSource ...
Many thanks
Hans

I ran into the same problem. You can't dynamically switch DataSources for a chart, however, you can re-assign a DataSource to a different query.
I have a chart assigned to DS_1:
On startup, I need to check a flag, and use a different query based on the value of the flag.
Since I can't dynamically switch the DataSource for the chart, I simply switch the query that feeds the DataSource like this:
I hope this helps.

Today I deleted an email services I no longer need. Now when I go to the notes app I no longer have any notes. Is there any way to get my notes back. I have the first iPad running iOS 5.1.1

Today I deleted an email services I no longer need. Now when I go to the notes app I no longer have any notes. Is there any way to get my notes back. I have the first iPad running iOS 5.1.1

Ah, well, then the notes are probably gone. Did you save any of the email from that account on your computer? The notes might be there if you did.

Logic Pro X 2013 delete custom loops

How do I delete custom loops from both my library and the UI?

Apple loops are stored in these locations...
YourHD/Library/Audio
YourHD/Users/'you'/Library/Audio
YourHD/Library/Application Support/Logic
YourHD/Library/Application Support/Garageband
if you cannot find one of your own...
Use Find Any File (FAF) to locate it...
http://apps.tempel.org/FindAnyFile/
FAF makes life much easier when trying to find things on your Mac

HT4437 Can I play a video from the remote app onto apple tv whilst simultaneously stra,ing music to other speakers via express?

Can I play a video from the remote app onto apple tv whilst simultaneously stra,ing music to other speakers via express?

Thank you for that, I wanted to make sure I was trying to replicate the same thing as you. Just tried it now, works fine for me.
Of note though, this will take a relatively well performing network to achieve this, I have such a network, if your network is not as good as it might be, you might encounter problems.
For the avoidance of doubt, I used the remote app on my phone to get my iTunes library on my computer to stream music to 3 of my Apple TVs, I then used the remote app to control another Apple TV and get it to stream a music video from my computer to it. Of interest I managed to do this while my wife was using yet another Apple TV (not with the remote app) to watch something else from iTunes on my computer.

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

BAPI_PO_CREATE1 Works on the First Loop

Dear all,
I have several data in a internal table, base on the data on the internal table I'm using BAPI_PO_CREATE1 to create purchase order.
On my first loop in the internal table, the BAPI_PO_CREATE1 was able to create the first PO. However, for the subsequent loops (second, third etc...) BAPI_PO_CREATE1 was not able to create PO. I have debugged and found out that the KOMP-NETPR has no value & I'm getting an error message "Net price must be greater than 0".
I also tried to pass some value on the net price in the POITEM table of the BAPI_PO_CREATE1 but it doesn't work.
I can't figure out where & why KOMP-NETPR has no value and I also don't know why the first loop always work.
Please shed some light on this. Thanks in advance.

Hello SKJ,
Thank you for your reply. However, the functional consultant insists that all the pricing are well maintained.
I came across a post in this forum with the same problem, they said that they refreshed the buffer/memory for every call on the bapi_po_create1.
I did put this line of code:
PERFORM mepo_refresh(saplmepo).
CALL FUNCTION'BAPI_PO_CREATE1'.
But it didn't work either.
Edited by: totoy_ on Nov 30, 2011 2:41 AM

Display chart via express vi - deletes first loop run

Similar Messages

Maybe you are looking for