My computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized

My computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized on list along with all my neighbors. Any help would be greatly apprectiated.

System Preferences > Network
WiFi/Airport should be at the top of the list.
Select WiFi/Airport
[√ ] Ask to Join new Networks
click ( Advanced )
In the WiFi/Airport pane, remove ALL other networks except your home Network. (This will keep your computer from "wandering off" onto a neighbor's Network.)
You are not done until you close the windows and Save Changes.

Similar Messages

HT3964 Hi , My modem got zapped by lightning yesterday. My iMac still was able to power on when I tried it yesterday. Today the modem is replaced and internet is working, but now the computer will not power on. I followed the steps to reset SMC. Noth

Hi , My modem got zapped by lightning yesterday. My iMac still was able to power on when I tried it yesterday. Today the modem is replaced and internet is working, but now the computer will not power on. I followed the steps to reset SMC. Nothing. ??

Ouch, not much more you can do, I think you'll have to have it looked at.

I have just purchased a new pc and when I try to play 2 separate albums that I bought from the itunes store I get a message that my computer is not authorized. I then follow the steps to authorize it and the same thing happens when I attempt to play this

Just purchased a new pc with windows 8. Transferred over my itunes. With 2 different albums in my library, when I attempt to play this music I get a message saying my computer is not authorized. I then sign in to authorize the computer, itunes tells me it is indeed authorized, I attempt to play this music again and I get the same "your computer is not authorized" message again, and again....
Any help out there on this one would be appreciated. If my question is not clear enough I will attempt to help.
Thank you,
mike

Delete and redownload them if doing so is free in your country.
(106637)

I am on mac, Yosemite, I have followed the step by step on everything in the Adobe help page, so I install it, uninstall it, and I did this 3 times, still nothing, it doesn't do anything when open the folder, Please help, I now have no abode flash player

I have tried to download Adobe flash player 3 times, NOTHING HAS HAPPENED, HELP!!!!!!!!!!!!!

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

TS1389 I keep getting a message telling me my ipad cannot be synced because my computer is not authorised for items purchased on this i pad. I tunes tells me it is authorised and o have follewed the sugestions for windows 7 and it stil wont sync.

My ipad wont sync when i try to put old apps back on, it tells me my computer is not authorised for purchased items for this ipad. I have followed the steps for windows 7 but it stil wont sync. I tunes tells me the computer is authorised. What can i do?
Cheers pete.

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

Airport (Express) is turned on but is not connected to a network.

Hi
I am having an issue with my Airport Express set up. I have had 18 months of use of the AE for internet access (no other wireless hardware used), but have suddenly lost the wireless ability.
In my network preferences it shows the AE with an amber light (green on the actual AE) with the message "Airport is turned on but is not connected to a network". When I look at the Airport utility there is no AE showing even after multiple "rescans"
I have gone through multiple processes of turning on and off the router, AE and MBP to no avail. I have gone through soft and hard reboots to intermittent visibility in the Airport Utility. This includes direct linking MBP to AE with Ethernet cable
When the AE finally shows in the utility, i have reset all passwords etc as advised by program, but when the utility goes to restart the AE it loses it and I end up back at square one
I know the internet is working due to Ethernet directly into the MBP
I have take to a friends and they plug and play ... so know the AE works
Is there something i am not doing? Why is the AE and MBP not talking to each other?
Please someone help me !!

Hi, Kozou. Welcome to the forums!
Connect your computer to the Express's Ethernet port and open AirPort Utility. Does this allow AirPort Utility to find your Express?
If so, go through the setup process. After the Express restarts, disconnect it from the computer and connect it to your DSL, cable modem, or whatever provides your internet connection. Wait a minute or so. The light on the Express should turn green.
Now tell your MBP to join the wireless network created by the Express. You can do this using the AirPort menu or the Network pane of System Preferences.
Does this work?

My old Airport Express wants to work but can't

So I've read a lot about Airport Express PSUs dying, but that isn't my issue here.
I bought this Express about 3 years ago. It worked great for the first 18 months as far as I can recall, we'd hold parties with Airplay streaming and everyone was really impressed.
I moved house and had no need for it so I lent it to my sister, who was in a wirless party house at the time. They could never get it to interact with their Netgear router properly so it just sat on the shelf for another 18 months. I've now moved into my sister's house and brought my Airport Extreme with me. We were hoping to live the Airport Express Airplay dream again and after some tikering and a hard rest I got the Airport up and running again and Airplay worked fine.
That was about 3 weeks ago.
2 weeks ago Airplay stopped working. It was cutting out and then it just gave up altogethor. Activating Airplay would cause the Airport Express to immediately go amber. With some tinkering I managed to have ti recover, I just had to keep Airplay running, manually go into the Airport Utility and convince the Airport to reset. By then the track tht ws playing might be about, oh, 3 minutes in. When the track changed to the next song, pfft, amber again. I maanged to recreate these situations several times.
But now, we're lucky if the thing works at all. I'm here in my bedroom on one bar of reception and my housemate Andrew has got, count em, three antennas coming out of his PCI wirless card for a single bar of reception, this is because the Airport Extreme is at the otehr end of the house. Every now and then the Airport Express splutters into action and we get something resembling a reliable connection. Unpluggin it and plugging it back in seems to do the trick. But it'll die again, solid amber.
So yeah, in summary an older Airport Express that had been reliable for years has deteriorated in 3 weeks. I don't know what to do, i can't afford a new one. Any suggestions are welcome, any requests for additional information/elaboration on parties will be answered.

Hello love4pugs...Welcome to the Apple Discussions!
Most likely, you just didn't leave enough time to do a complete power recycle of your network components so that your Motorola modem can "recognize" the new device (AirPort Express) connected to it.
Try the following...
Modem/Router Power ReCycling
- Power-off the Cable modem, AirPort Router, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AirPort Router; Wait at least 5 minutes.
- Power-on the computer(s)

Airport express connects to internet, but not print server

hello all. i hope someone can help me with this. 2 days ago, my wife was able to print using her ibook/airport expess setup. today, the network diagnostics has this message: "network diagnostics was able to connect to the internet but not to the server EPSON Stylus CX3800.pdldatastream.tcp.local. this could be caused by problems with the server, or an internet problem between this computer and the server." she says this happened when she turned it on. what could be causing this? any and all help welcome. mcrat

You can reset the AirPort Express (AX) following the directions in Resetting an AirPort Base Station or Time Capsule FAQ.
Then you can use AirPort Utility on your computer to configure the AX.

Hello, I have Iphone 5 with Itunes music, airport express, 2 stereo speakers. What else do I need to hear music on the speakers?

Hello, I have Iphone 5 with Itunes music, airport express, 2 stereo speakers. What else do I need to hear music on the speakers?

Hello ricsch,
It sounds like you want to setup your Airport Express to Airplay music from your iPhone 5. I found an article with steps to help you get this setup:
Connecting to an existing Wi-Fi network, exclusively for iTunes music
AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
How to Set It Up
Connect your AirPort Express to your home stereo or powered speakers.
From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
http://support.apple.com/kb/ht4587
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

I have an Airport Express, which flashes amber, but when I go to manual set up, it says there's an error and tells me to close configuration?

I have an Airport Express, which flashes amber, but when I go to manual set up, it says there's an error and tells me to close configuration? Once I complete that, the same thing occurs, and there's another error message?

Is this a new AirPort Express, or one that you have had for some time that has now developed problems?
What function do you want the Express to perform on your network?

I just purchased Apple TV AND AIRPORT EXPRESS. I am questioning if I need it when I already have a Netgear Powerline AV 200 Adapter Kit XAVB2001. Does the Airport Express do the same thing?

I just purchased Apple TV AND AIRPORT EXPRESS. I am questioning if I need it when I already have a Netgear Powerline AV 200 Adapter Kit XAVB2001. Does the Airport Express do the same thing?

Thank you so much. Any specifics I should know about prior to connecting? The goal is to watch Netflix from my iPad or iPhone 5 on my tv (located in different room from where Comcast internet modem is hard wired to main computer in house). Movies would depend on wireless transmission to a smart tv not connected to modem.

Airport Express has green light but can't be seen in airport express

I had something odd happen with my wifi network today. I have reset everything and gotten all my Airport Expresses (AE) working again except one. This AE can not be seen in the Airport Utility (AU) no matter what I do. I have brought it into the same room as the transmitter and it would still not be seen. So I connected it to an ethernet cable and when I did the light turned green but still nothing in the AU. Each time I have changed configurations I have attempted to let the AE attempt to start on its own, I have performed a soft, hard reset and then a factory reset.
This is an older device (b/g not n as I recall) - what am I missing? It is difficult to determine if the device actually resets but the light blinking seems to match with descriptions of the process on the web. This all worked yesterday and this morning until my network went haywire (only the 2.4 GHz signal went out, I changed channels and reset and it has stayed up since). All the othe Airport devices could be reconnected by a hard reset after which they appeared in the AU and I could then reconfigure. This one AE just will not cooperate.
Any thoughts will be appreciated.

The model number is A1084 and I am using version 7.6.1 of AU.
When I attempted the hard reset the list starts off amber then after 5-10 seconds the amber light flashes rapidly and that is when I remove the paper clip I am using to push the button. Afterwards it goes solid amber for a bit then flashes amber. If the devices is not plugged into the ethernet it stays flashing amber, it it is connected to the ethernet it goes steady green
When I attempted the factory reset it is solid yellow for quite awhile then I get a rapid flashing green light at which time I remove the paper clip. It then goes back to amber for awhile then flashes amber. If the devices is not plugged into the ethernet it stays flashing amber, it it is connected to the ethernet it goes steady green.
In neither case does it appear in AU. Also FYI I am running Mountain Lion although everything has worked fine until yesterday.
Thanks for the reply

Trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

Sometimes I cannot select an airport express to output sound from a current model mac air/10.9.3. The output jumps back to internal speakers or apple tv. Any ideas?

Sometimes I cannot select an airport express to output sound from a current model mac air/10.9.3. The output jumps back to internal speakers or apple tv. Any ideas?

Hello Cloud19,
The article linked below provides some helpful information and troubleshooting that can help resolve issues with AirPlay and your Airport Express.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

My computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized

Similar Messages

Maybe you are looking for