Display duration of timeline selection

I'm surprised this isn't available that I can find, and it's understandably difficult to search the forums for a solution.
I'm looking for a way to display the duration of the current selection on the timeline, whether it's one or multiple clips, or even a gap. I'm also finding it difficult to insert a gap of a certain length between clips; cut and paste doesn't seem to work on non content.
Thanks.
AC

PPro also displays the duration of the timeline selection on the right of the wrench icon in the program monitor as shown in the above picture.

Similar Messages

  • I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip.  Yes, I know I can add them up myself, but why?  :-)

    I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips.  Yes, I know I can add them up myself, but why?  :-)
    I am using imovie 10.0.6

    For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
    Geoff

  • HOWTO: play duration of a selection

    Surprised I can't figure this out with the searches I've already done...
    How can you see how long a selection is that you've made? For instance, if I mark the in & out, how can I see how long that selection is?

    Ann
    It was pointed out to me the other day that the same indicator area also will display duration from just the IN and Out Marks.
    No need for lasso or fwd slash etc..
    I was previoulsy aware of that in the Source Monitor ...but not the Timeline.

  • Displaying task in timeline webpart based on view from task list

    I have added one custom column in task list called category and created different view based on different values of category.
    when I display a view and select show timeline, it display all the task and does not filter the task based on view. Is there any possbilty to achieve this?

    Hi Ashish, if you click to modify the view, scroll down to "Style." You'll see the different styles in there, and below those, you'll see "Show timeline above the view." Select that box and the timeline will be included with your view.
    cameron rautmann

  • How can I format the y-axis to display durations?

    How can I cause the y-axis of this chart to reflect the values in Row 6 [Average Pace (Minutes per Mile)] of the corresponding table in duration format rather than number format. In other words, I need the y-axis to be a list of durations appearing like the figures in Row 6. Also, I need it to begin with the longest duration (10:00) and to climb to the shortest duration (5:00) at the top. I'll should mention that I already tried using the Inspector, but the "Duration" formatting option for the y-axis was not selectable while other formats were. I also tried formatting the y-axis this way to "Same as source data," and this didn't cause it to display durations either, though I had expected it to. Thanks in advance!
    Ryan

    Hi Ryan,
    Numbers can display only numeric values on the Y axis, and those values are always arranged from highest to lowest, with highest at the top.
    That said, here's what is possible:
    There is, of course, some manipulation of the data involved in this, as well as replacement of the value axis labels with custom labels in a text box.
    Here's what's happenng with the man behind the curtain:
    While the chart shows the data from row 6, it is actually graphing the data from row 7 (or whatever row you choose to place this data in.
    Row 7 uses a formula ( =-60*24*STRIPDURATION(B6) ) to first strip the Duration from the data in row 6, returning a number representing the fraction of a 24 hour day equivalent to the duration in row 6.
    It multiplies that number by 24*60 to convert it to the number of minutes (and fractions of minutes) in the duration, and changes the sign of the number to - (negative) so that the shorter values will be higher in the chart.
    Selecting row 7 and choosing Line Chart from the Charts Button's  menu produces, with one difference, the chart shown after setting the min and max values on the Y axis to -10 and -5 respectively, and incrementing the number of steps on the Y axis from 4 to 5).
    The difference, of course, is that the Y axis value labels all show negatic=ve numbers, with no m to indicate they show 'minutes.' To correct this, insert a text box and enter the six numbers 5 to 10, with each followed by an m and a return.
    Select the Text box, change the alignment to Right aligned (with the alignment button in the format bar), then drag the box in front of the Value axis labels with the 5s aligned.
    In the Inspector, choose Text inspector, then Text. Use the Space after Paragraph stepper to increase the setting until the 10 in the box aligns with the 10 in the Value Axis labels box. You may have to tweak the height of the chart slightly to achieve this alignment.
    Select the chart, then choose the Chart Inspector, then Axis. Use Choose Axis Options (for the Value Axis) to uncheck Show Value Labels.
    Regards,
    Barry

  • In history displays. put checkmarks and select all.

    In history displays. put checkmarks and select all.

    Can you clarify what you mean?
    Do you have a problem with the history?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB

  • How to display a screen in selection-screen?

    hi friends,
    I have a requirement. I have one PNP database SELECTION-SCREEN in my report program. And i have created one more screen using screen painter.
    Now i hae to display that screen which i created using screen painter under PNP SELECTION-SCREEN.
    For ex:
    PNP SELECTION-SCREE.
    Pernr Number    _______________
    Employe Name _______________
    Company Code _______________
    Payroll Area     ________________
    Now after this i have to display my screen which i designed using screen painter.
    As shown below.
      O In rupees
      O In Percentage
       Variance______
    Here i specified some fields only. some more fields also there.
    For this i did as....
    I created a BUTTON in SELECTION-SCREEN. And when the user clicked on this then screen will appear as window.
    It's working fine.
    It's look like this.
       |More Selections...|                            -
    > Button
    But,my client required that screen also wants to display directly under PNP SELECTION-SCREEN but not as window and clicking button.
    If Any Help.. Plz....
    Thanks & Regards,
    Shree.

    hi prakash,
    thanks for ur solution.
    but it's not working properly. while changing 1000 screen and activating, it's showing syntax error like this.
    while changing:
    ==> Element PNPS$MCD touches or overlaps other element
    ==> Selection screen: Report generation makes screen changes ineffective
    ==> Element PNPS$MCD touches or overlaps other element
    While Activating:
    Syntax Error in Screen.
    Program <myprogram name>
    Screen   1000
    Position  Flow Logic       Line 95
    The include block has been used twice.
    But, Here i clicked the button "Activate".
    Then It's showing messages as this.
    ==> Selection screen: Report generation makes screen changes ineffective
    ==> Element PNPS$MCD touches or overlaps other element.
    I checked out that Line 95.
    There i am specifying my suscreen as this.
    CALL SUBSCREEN subscreen1 INCLUDING sy-repid 106.
    at end of PBO.
    And in PAI.
    CALL SUBSCREEN subscreen1.
    Finally when i tried to execute it's giving DUMP.
    Any solutions..
    Thanks & Regards,
    Shree.

  • Clearing the displayed value for a SELECT-OPTION

    How do I clear the displayed value of a SELECT-OPTION? 
    I have 2 SELECT-OPTIONs on my screen (standard basic report program screen).  I use code like this to populate the drop-down boxes for each one. 
    =====
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prgrp-low.
      PERFORM fill_prgrp_values.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prctr-low.
      PERFORM fill_prctr_values.
    =====
    The value the user picks for the first SELECT-OPTION will affect what values I put in the drop-down list for the second SELECT-OPTION. 
    If a user enters a value for the second SELECT-OPTION, and then goes back and changes the value of the first SELECT-OPTION, then I want to do two things:
    1.  Create a new set of values for the drop-down list for the second SELECT-OPTION (no problem; working fine);
    2.  Clear the displayed value from the second SELECT-OPTION that the user entered previously.  That value became invalid when the user picked a new value for the first SELECT-OPTION. 
    How do I clear that second displayed value? 
    I have tried CLEAR and REFRESH for the second variable using the formats s_prctr, s_prctr[], and s_prctr-low.  They will erase the values of the internal table or part(s) of it, but the displayed value stays on the screen. 
    I need to clear out the displayed value so the user will either leave it blank or enter or select a new value. 
    I am using F4IF_INT_TABLE_VALUE_REQUEST to build the drop-down lists, and it works fine, but I do not see any function module to clear the displayed value off the screen. 
    Thanks for your help.

    Sorry, but calling DYNP_VALUES_UPDATE did not work.  This is how I coded it. 
    fld_reset_rcd-fieldname  = 'S_PRCTR'.
      fld_reset_rcd-stepl      = sy-stepl.
      CLEAR fld_reset_rcd-fieldvalue.      "  re-initialize s_prctr
      CLEAR fld_reset_rcd-fieldinp.        "  what goes in here?
      APPEND fld_reset_rcd TO fld_reset_tbl.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname = 'ZFI_GL_BALANCE_NGL'
          dynumb = '1000'
        TABLES
          dynpfields = fld_reset_tbl
    <Added code tags>
    I have discovered that CLEAR and REFRESH of s_prctr will clear it somewhat.  If I enter multiple values, ranges, etc., they will all be cleared, EXCEPT for the one single value that is displayed on the main screen.  It is not cleared and it remains if you push the button to display the pop-up to enter ranges, etc. 
    To devrath.sampat  --  Thanks for your example for building the drop-down list, but that is not the problem I am having.  I am already able to build it just fine. 
    To repeat my problem, if I: 
    1.  first enter / select a value for the first SELECT-OPTION s_prgrp
    2.  then enter / select a value for the second SELECT-OPTION s_prctr
    3.  And finally go back and select a new value of the first SELECT-OPTION s_prgrp from its drop-down list,
         when I do, the program needs to clear the value displayed on the main screen for the second SELECT-OPTION s_prctr (any additional values, ranges, etc., are cleared by CLEAR and REFRESH, if I go look; but not the value shown on the main screen).
    Edited by: Scott Crosby on Feb 14, 2012 4:20 PM
    Edited by: Suhas Saha on Feb 15, 2012 12:03 PM

  • Need to display TEXT in web selection screen

    HI All,
    We are working on CRM-BW  modeling. We have one field called "product" which will have key and medium text. We need to display both key + text in web reporting selection screen. When we ran first time text was not showing in web report. Then we found and change the configuration in search help in SE11 for that field. Then we can see the text+key combination in RSRT but still we can't see the text in web report selection screen...
    Now what we have to do to display text in selection screen on web...
    Please give your inputs  ASAP.....we are in UAT phase....
    Thanks in advance
    Arun

    Hi Arun,
    For you case: Display key & text in selection screen.
    In BW,
    You can go to query designer, then you'll go to the info-object belong to the variable (selection-screen : product). Right-click, find for the properties, Then you'll see the option for <b>display as</b>.
    Choose it for Key and text.
    Then save it.
    Go to the report, in the selection screen, when you're choosing for the help, you'll see the value displayed by key & text.
    Hopefully it can help you a lot.
    Regards,
    Niel
    Thanks a lot for any points you choose to assign.

  • Movie won't display in Arrange timeline

    HELP!
    I am able to import a QT Movie (320 x 240px) and see it playing in the Arrange windows inspector box at left, however it will NOT display in my timeline Global Tracks , which is useless to me.
    Have configured Global tracks for VIDEO option and checked all Logic dislplay prefs
    dunno- can anyone help??
    thx

    That would be a start!
    Post back if it didn't work with further details of what movie this is, and what version of iMovie.

  • How can i get the order form to display only those fields selected by user?

    Hi everyone,
    I'm a newbee so please bear with me.
    I would like to create an interactive form in a multi-page format. I would like to display our fifty odd products, divided into 5 different categories. The client browses through these pages then selects those that he wants to buy.
    The interactive order form at the end should display only the client’s choices along with the Total purchase order.
    In short, a little like a on-line catalogue and cart/basket that we see while buying online.
    Now, I've created my pdf brochure, and I have the order form on page 12-13 at the end with the subtotal, Vat and Total ...all that's fine. My only problem is I want the order form to display only those items selected by the user and not the entire list of items as shown in my current order form.
    Have a look at my pdf here http://www.upperside.fr/vijee/mpls09ex/EXHIBITOR%20SPECIAL%20ORDERS2010.pdf
    Can someone please help me/guide me to the right resources that I need to look up to achieve my end result.
    Thanks a lot in advance.
    Vijee

    The poster already posted at the Acrobat Users Community, Interactive Forms that sums up a client order from catalog. The sample form posted to Acrobat.com was a revision of the sample form that came with Acrobat 4.0. There are some fairly advance scripts, templates, and document level functions involved with this form.

  • To display multiple BOMS by selection

    I'm trying to avoid havig to create a report to collectively display multiple BOMS by selection (eg MRP controller, group of header materials etc) to satisfy the following:
    - collective display
    - multi-level display (indented)
    - factor scrap, giving component qtys as per base qty of BOM header
    Trans CS11 provides this info, only on an individual BOM basis.

    Hi,
    Can explain your query a bit more in brief?
    Thanks
    Kathir~

  • Accessing display values of a select list (or LOV)

    Hi all,
    I was asking myself if it is possible to access the display values of a select list (to be added to a report header and to the Head section of a pdf export),
    and to call them in form of the &xxxxx. notation
    e.g. if &P10_REGION. return the selected value (e.g. 1), I would like to have the corresponding display value (e.g. USA) .
    Kind regards,
    Boris

    Thank you Graham,
    unfortunately I'm a newbie regarding Javascript. Reading the APEX help, I could understand something but not everything.
    I would enter into the page html body the following script
    <script type="text/javascript">
    document.getElementById('P10_hiddenItem').value = document.getElementById('P10_referenceItem').text;
    </script>
    Is this the correct approach?
    how should I then submit the page?
    Thank you,
    Boris

  • How to create a event to display records depend on selection ofdropdownlist

    BSP
    how to create a event to display records depend on selection of dropdownlist box,
    Using BHTML,
    thank you,
    regards,
    jagrut bharatkumar shukla

    1) Copy this script to the code
    <script type="text/javascript">
    function displayVacationDates() {   
        for (var i=0; i < document.forms[0].Status.length; i++) {
            if (document.forms[0].Status[i].checked && document.forms[0].Status[i].value=='Vacation'){
              document.getElementById('startDateRow').style.visibility='visible';
              document.getElementById('endDateRow').style.visibility='visible';
             if (document.forms[0].Status[i].checked && !(document.forms[0].Status[i].value=='Vacation')){
             document.getElementById('startDateRow').style.visibility='hidden';
              document.getElementById('endDateRow').style.visibility='hidden';
    </script>
    2) Set initial style to 'hidden'
    <tr id="startDateRow" style="visibility:hidden">
    <td align="left"><blockquote>
      <p><span class="style16 style8"><strong>Start date:
      </strong></span></p>
    </blockquote>                 </td>
    <td align="left"><script>DateInput('VacStart', true, 'DD-MON-YYYY')</script></td>
    </tr>
    <tr id="endDateRow" style="visibility:hidden">
    <td align="left"><blockquote>
      <p><span class="style16 style8"><strong>End date:
      </strong></span></p>
    </blockquote>                      </td>
    <td align="left"><script>DateInput('VacEnd', true, 'DD-MON-YYYY')</script></td>
    </tr>
    3) Call the display script
    <input name="Status" type="radio" value="In the Field" onclick="displayVacationDates()">
    <input name="Status" type="radio" value="Vacation" onclick="displayVacationDates()">
    <input name="Status" type="radio" value="Sick day" onclick="displayVacationDates()">
    <input name="Status" type="radio" value="Admin Day" onclick="displayVacationDates()">
    <input name="Status" type="radio" value="DSR Ride Along" onclick="displayVacationDates()">
    <input name="Status" type="radio" value="ServiceCall" onclick="displayVacationDates()">

  • Changing the text displayed in Pagination Navigation Selection

    We are trying to find a way using the ADF tables to modify the text that gets displayed in the combo selection dropdown for page navigation.
    Currently, it will say "1-10 of 8" and we want it to say, for example, "1-10 of 8 pages". Is this possible?

    Hi,
    no. This is an enhancement we are working on for a future release. The String is part of the component and not yet in a message bundle for you to change
    Frank

Maybe you are looking for