Display Filter Values in BEx Report

I have a BW query that has a dimension (Unit of Measure, UoM) in the filter area. The user can only select one value for UoM. The user selects "Z03" which corresponds to a UoM text value of "lb/1000 gal". How do I display "lb/1000 gallons" at the top of the BEx report.
If this is not possible, I would like to at least display the value Z03 at the top of the report. I prefer not to devote a whole column in the BEx report to UOM, since the user can only select one UOM. I am new to BW and this is my first posting.

Hi Jeff,
if you have a variable for UoM you can add the value/text of the variable via textvariable to the query title.
Please ask if you need more advice on this.
Regards
Marcus

Similar Messages

Do not want to display compounded value in BEx report

Hi,
My info object material has compounded with plant.
When I show material in the report, its showing along with plant.
Plant 20
Material ABC.
In report, its showing like 20/ABC.
I dont want to show 20 with ABC, how do i fix this?
Thanks

Removing Controlling Area from Profit/Cost Centre
In BEx QD, for 'Plant', u should select 'Display As': Key.... And may not work, if select 'Key & Text'.
Edited by: Mr. V on Dec 3, 2009 8:21 PM

How to Add a New Filter Value in BEx WAD to Display All Result

Hi experts,
I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
The status field can have two values: Active ("A) and Inactive ("I").
But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
Does anyone have an idea?
Regards,
Joon

Hi Vineet,
thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
Is there any possibility to realize this?
Thanks,
Joon

Date range to be displayed & Displaying multiple values on the report

Hi,
I have date range parameters, but I also need it to be displayed it on the report. Is there any way I can display it. E.G If a parameter is created one can drag and drop it on the report if it needs to be displayed on the report, I tried to do the same for the date range parameter but it does not work.
Also If a parameter is created by selecting the option 'Allow Multiple Values', and if you drag and drop it on the report only the first value is displayed and the rest does not show. Has anyone tried this before and been successful in displaying multiple values in the report.
Thanks in advance.

Hi,
A multi-value parameter is actually treated as an array in Crystal Reports.
To display the values selected in the parameter, create a formula from the Field Explorer and type this code:
Join({?ParameterName},",");
Place this formula on the header or the footer sections of the report.
Regarding the date range issue, please follow Sastry's advice and it should work fine.
Make sure you're using the parameter in the Minimum and Maximum functions. For eg: If I was to create a date range parameter called OrderDate, my formula to show the start date would look like this:
Minimum({?OrderDate})
-Abhilash

How to display filter values in analyzer

Hi expert,
I want to add filter into analyzer, above data table, I insert a few rows, and add text to hold filters, but after quit from design mode, inserted rows for filters dispear, and its spaces are taken by data table. could you please tell how to display filter values .
Many Thanks,

It is looking like you are saving them as workbooks. It will be possible to maintain fliters if you save with the filters given by workbook properties, not by manual feeding.
let us know with clear expectation if you are not clear with it.

How to remove unassigned(#) value in bex report in 04s

Any help on hiding/ removing unassigned(#) value in bex report in 04s , the query is created on an infoset( left outer join).

you can exclude # in your restriction...
assign points if it helps

Getting wrong values for decimal value in Bex report

Hi,
     I am getting some problem in Bexreport decimal values.
   In ODS i am able to look the values for this key figure
(Total PO Release Val)= 140.692,00,the same value in Bex report looks like this $ 140,692.00.
     Here one calculation is going with these above values
   % Used = 'Total PO Release Val' / 'Target Value' * 100
    as per ODS value calculation it is correct = 140.692/1000 * 100 =14.692
   as per Bex it is coming like this = 140,692.00/1000 *100 = 142.692.
    in Bex report Percentage valus is not considering value is taking as 140,692.00 rather than 140.692.I mean to say decemal values are ignoring while calculation in Bexreport.can you any please advice me how to comeout of this problem.Appreciate your help.
Regards
Ramesh

<i> "(Total PO Release Val)= 140.692,00,the same value in Bex report looks like this $ 140,692.00."
</i>
How do you check the ODS value? The amount will only have two decimal places after it, so you can't have a value like 140.692,00. It seems to be an issue of user's decimal notation (where decimal is represented by comma, and thousand seperator by '.'). Go to user profile, change this setting (in default tab) to correct one (ie decimal being represented by '.') and login again and check it. The value that you see in ODS is 'one hundred forty thousand six hundred ninety two, the same that you get in Bex, only the representation is different).

Display of calender month text instead of values in BEx report.

Hi,
I have calender months in the reporting columns, values of these reporting columns are dynamic in reports. We need to replace these values with text of the calender months. I have seen it at some places but do not remember how to do it now.
Can some one has idea on this, will update on this post please.

Hi
if you want to display in columns along with the data then right click and select properties and the select the disply as Text .
If you want to display in the header go the properties and in the header (Title area where u provide desxcription) instead of ur description enter the text variable &0T_CMONV& or you can select the text variable from the list .
Regards
Ram

How to show Blank values in Bex Report

Hi friends ,
                   In my bex report one of the KF Column having zero's and Blank values .
Ex .   Mat     Price
          A         0
          B
          C        15
                                when i create a condition Price > 0
Then the given Out put is
                                        Mat     Price
                                         C        15
                                                                   but the required Out put is
                                                                                                           Mat     Price
                                                                                                            B
                                                                                                            C        15
I.e I have to Remove only zeros and i should show blank values. Could you pls give some Ideas on this .

Hi friends thanks for response,
but my requirement is
Mat
Price1
Price2
A
     0
B
12
C
   15
D
0
E
    8
F
     0
The Required Out put should be
Mat
Price1
Price2
Price3 (1+2 )
B
12
12
C
15
15
D
0
0
E
8
8
The user don't want see materials Price1 which is Zero . So I should remove materials A and F in Price1 column .
IF i apply condition on Price1 > 0 in the out put B and D also not displaying bcoz blank values consider as Zero.
Can you pls give some ideas how to full fill this Requirement

Not assigned value in Bex report

Hello experts,
One of the value in the BEx report is appearing as not assigned. What could be the reason?
Thanks
SP

Hi all,
In the back end system 0sales_office is attribute of 0customer,
Then I have activated the 0customer master data and done attribute change, I have such display at BEx reporting
customer        sales office(key)       sales office(text)                      Sales
9876554               0010                         Michigan                         USD   4567
                                #                            Not Assigned                  USD   2563
although I expect to see
customer        sales office(key)       sales office(text)                      Sales
9876554               0010                         Michigan                         USD   7130
Is there anything I do miss?

How can I pass a filter value to another report?

I'm using a filter within a formula of a field. For example: (FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 2'))-FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 1')))*-1
What the above is doing is calculating the variance between Q1 and Q2. My issue is when I drill on this value to a more detailed report, it's combining the Q1 and Q2 values, instead of showing the difference. I'm trying to avoid having to hard code the drill report and was wondering if there's any way to pass the calculated FILTER to the other report?
Thanks.

Hi,
I presume that you want to show the the difference between a prompted quarter and its previous quarter?
If so, I would use the Ago Time Series Function to create a new logical measure for prior quarter e.g.
ago("Facts - Actuals Ledger"."Actual", "Time"."Quarter", 1)
Note that the function should contain the time dimension level for quarter. The 1 at the end is the offset e.g. 1 quarter ago. This measure will now return the prior quarter value for whatever quarter is prompted.
Create a prompt for your report for Fiiscal Quarter, and set a filter in the report for the same column with an operator of Is Prompted.
Add the base measure ("Facts - Actuals Ledger"."Actual") and your new Ago measure to the report. When you prompt the report with a quarter, these two columns will show the Actual amount for the promted quarter and the previous quarter respectively. Now all you need to do is subtract one from the other.
Now, when you drill to another report, the filter value of the prompted quarter will be passed across. Apply the same logic to define measures in the drill report, receiving the prompted quarter only.
Note that you can also use Time Series Functions in the column formula when creating the analysis.
Please mark if helpful / correct,
Andy
www.project.eu.com

How to display a value of one report in another report in obiee 11G

Hi,
I have Requirement, I created one report in that i have a columns Rank, Net price, list price and ..., so in prompt i have rank column and year column so if i enter rank as 5 and year it shows me top 5 ranks with net prices according to selected year in prompt, now i did a grand total on rank column to get total sum on net price, i got $12345 value for net price column . Now I created another report in this it shows sum of total year for net price with value $1234567, this value i got when i selected year 2011 in prompt i.e same prompt . Both this reports have same prompt in section 1 Prompt and in section 2 this two reports. Now i need to Display a pie chart with this two total values coming from two different reports in same pie chart. but i can't display both columns on same report. please help me
Thanks,
Pankaj
Edited by: Pankaj on Apr 2, 2012 4:20 PM

Any Help Guys..

Display variable values in Web report

Hi Bw Mates,,,
I am trying to display the variable values in Web Report.
I put one text Item in Template and checked the Variable Display and entered the variable name in List.
still I cannot see the variable values in the report.
Thanks for your help.
RSB

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TEXTELEMENTS_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="GENERATE_LINKS" value=""/>
         <param name="GENERATE_CAPTION" value="BORDER"/>
         <param name="SHOW_COMMON_ELEMENTS" value=""/>
         <param name="ELEMENT_TYPE_1" value="VARIABLE"/>
         <param name="ELEMENT_NAME_1" value="Z_CP_018"/>
         ITEM:            TEXTELEMENTS_1
</object>
as the other poster mentioned the variable name has to be in upper case.
if only_values = 'X' you will just get the value other wise
you will get something like below.
variable description = variable value
Regards
Raja
Reward the helpful answers and close the thread once its answered.
sorry for the delay in answering, it was weekend for us

Maximum number of filter values in BEx web

Hi
Is it possible to change the maximum number of filter values displayed when running a query?
Example: When the user runs a query and has to put in a material number, he pushes the button which shows him the possible values for input. The number of values displayed per page is 14 and the maximum number of pages is 72. The maximum number of values is 1000. If the user tries to search, he only searches amongst the 1000 possible values. Is it possible to change the number of possible values shown to unlimited?
We use NW04s BI SP09.
Kind regards
Erik

Hi Experts
I have the same problem , the maximum number of hits si set to 200 , ant the variable contains over 300 values , it is a variable based on a time charactersitic , and the values appear in ascending order , i mean the first 01.1900 , and the last value 03.2012 . i wonder if there is a way to change the order of sort to descending order . I mean the first value 03.2012 and the last one 01.1900 . I attach the image .
Thanks for your help.

Displaying parameter value in the report output

Hi,
I have a requirement to display the value 'All' in the report when the user selects 'All' from the list box. Can anyone suggest a way?
E.g.
My LOV input to the report has following values, 'A', 'B', 'C', 'All'.
If I select 'All', all the values A, B, C go into the query . But I need to display this I/P parameter as a field in the RTF showing 'All' in it.

u can try like this
if they select all u will have 'a,'b','c' as value in the xml tag right so always the string length of that xml field will be same when you select all . SAY STRING LENGTH WILL be 10 when user select ALL
( check the string how much is the value when you select ALL and implement this)
we can try using string length
<?xdoxslt:ifelse(number(string-length(XML_FIELD_TAG))>=10,'ALL',XML_FIELD_TAG)?>
or
<?xdoxslt:ifelse(number(string-length(//XML_FIELD_TAG))>=10,'ALL',//XML_FIELD_TAG)?>
So it will display ALL when user selects ALL else the selected value.
if you are not having parameter values as xml tag then you have use like this
<?xdoxslt:ifelse(number(string-length($XML_FIELD_TAG))>=10,'ALL',$XML_FIELD_TAG)?>
assign some points if helpful.

Display Filter Values in BEx Report

Similar Messages

Maybe you are looking for