Display issue coming out of sleep (w/ external display)

Hey everyone,
I've a MacBook Pro with Retina display. running 10.8.2 (and Win7 x64, via Bootcamp).
I somtimes experience trouble coming out of sleep with no external display connected, if the MacBook was connected to an external display when I sent it to sleep and the integrated display's brightness was turned all the way down. Basically, the MacBook's integrated display won't light up. I then need to hold down the power button until the machine powers off, and start it up again. Only then will the display come on, and the machine start normally.
I've been observing this with both an external Thunderbolt Display, and a TV connected through the HDMI port. I don't think this is a Mac OS issue, as I've seen similar behavior on this same machine, running Windows, under Bootcamp.
An example scenario: I'll be using the Thunderbolt Display, or watching a movie on my TV, with the integrated display's brightness turned all the way down, and then, while the display is still connected, I will close the lid - The machine will go to sleep. I will then come the next day, and while the computer is asleep, disconnect the external display, and open the lid. The MacBook's integrated display will not light up, the brightness keys will not respond, and I will need to force-shutdown the machine, and start it again - it will then start up, and usually fall back to the lowest display resolution setting (even though I always use much higher resolutions on both the integrated and external displays).
I'm guessing this is happening because the computer is expecting the external display that was connected to it, during its last operation, to still be available, and when it's not - it panics!
Also, I had times where this happened, and a force-shutdown would not do the trick. I had to actually connect back to the external display, wait for the machine to start normally, take the integrated display's brightness back up, and disconnect the external display. The machine would then resume normal operation, and I would be able to disconnect the external display and work on the integrated display.
Has anyone else experienced this, or anything similar?

There we go. Here's the complete Console report, up until the reboot, which fixed things. I can't make anything out of this, but perhaps someone else can.
13/10/12 8:37:29.010 AM loginwindow[535]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
13/10/12 8:37:29.041 AM com.apple.launchd[1]: (com.apple.emond.aslmanager[2845]) Exited with code: 255
13/10/12 8:37:29.468 AM hidd[540]: MultitouchHID: device bootloaded
13/10/12 8:37:29.000 AM kernel[0]: Wake reason: EC.LidOpen EHC1 (User)
13/10/12 8:37:29.000 AM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
13/10/12 8:37:29.000 AM kernel[0]: RTC: PowerByCalendarDate setting ignored
13/10/12 8:37:29.000 AM kernel[0]: Previous Sleep Cause: 5
13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: TBT W (2): 0x0100 [x]
13/10/12 8:37:29.000 AM kernel[0]: The USB device BRCM20702 Hub (Port 1 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0x1d181000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
13/10/12 8:37:30.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:37:30.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
13/10/12 8:37:30.000 AM kernel[0]: AirPort: Link Up on en0
13/10/12 8:37:30.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
13/10/12 8:37:30.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:37:31.000 AM kernel[0]: AirPort: RSN handshake complete on en0
13/10/12 8:37:31.982 AM airportd[2838]: _doAutoJoin: Already associated to “w00***”. Bailing on auto-join.
13/10/12 8:37:32.459 AM configd[17]: network changed: v4(en0+:192.168.1.104) DNS+ Proxy+ SMB
13/10/12 8:37:32.498 AM UserEventAgent[11]: Captive: en0: Not probing 'w00***' (protected network)
13/10/12 8:37:32.514 AM configd[17]: network changed: v4(en0!:192.168.1.104) DNS Proxy SMB
13/10/12 8:37:35.780 AM com.apple.usbmuxd[518]: SCEDeviceSocketCallback USBMuxRecvWithTimeout failed for 0x10020cb90-iTunes/com.apple.iTunes:0->0x3d-192.168.1.101:0:0: 54 - Connection reset by peer
13/10/12 8:37:35.781 AM iTunes[2272]: _receive_message (thread 0x117992000): Could not securely receive message size: SSL_ERROR_SYSCALL (Early EOF reached)
13/10/12 8:37:36.284 AM iTunes[2272]: _send_message (thread 0x117992000): Could not securely send message size 406: SSL_ERROR_SYSCALL errno (Broken pipe).
13/10/12 8:37:36.286 AM iTunes[2272]: AMDeviceStopSession (thread 0x117992000): Could not stop session with device 61: kAMDSendMessageError
13/10/12 8:37:57.165 AM com.apple.usbmuxd[518]: _handle_timer heartbeat detected detach for device 0x3d-192.168.1.101:0!
13/10/12 8:38:14.000 AM kernel[0]: NVDA::setPowerState(0xffffff8026183800, 0 -> 2) timed out after 45406 ms
13/10/12 8:39:25.000 AM bootlog[0]: BOOT_TIME 1350110365 0
13/10/12 8:39:30.000 AM kernel[0]: PMAP: PCID enabled
13/10/12 8:39:30.000 AM kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
13/10/12 8:39:30.000 AM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
13/10/12 8:39:30.000 AM kernel[0]: vm_page_bootstrap: 4043614 free pages and 117922 wired pages
13/10/12 8:39:30.000 AM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
13/10/12 8:39:30.000 AM kernel[0]: zone leak detection enabled
13/10/12 8:39:30.000 AM kernel[0]: standard timeslicing quantum is 10000 us
13/10/12 8:39:30.000 AM kernel[0]: standard background quantum is 2500 us
13/10/12 8:39:30.000 AM kernel[0]: mig_table_max_displ = 74
13/10/12 8:39:30.000 AM kernel[0]: TSC Deadline Timer supported and enabled
13/10/12 8:39:30.000 AM kernel[0]: corecrypto kext started!
13/10/12 8:39:30.000 AM kernel[0]: Running kernel space in FIPS MODE
13/10/12 8:39:30.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
13/10/12 8:39:30.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Sandbox
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Quarantine
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
13/10/12 8:39:30.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
13/10/12 8:39:30.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
13/10/12 8:39:30.000 AM kernel[0]: MAC Framework successfully initialized
13/10/12 8:39:30.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
13/10/12 8:39:30.000 AM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
13/10/12 8:39:30.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 889A
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
13/10/12 8:39:30.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration begin ]
13/10/12 8:39:30.000 AM kernel[0]: Sleep failure code 0x00000002 0x27006c00
13/10/12 8:39:30.000 AM kernel[0]: console relocated to 0xfd0020000
13/10/12 8:39:30.000 AM kernel[0]: PCI configuration changed (bridge=17 device=5 cardbus=0)
13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - SXFP method found
13/10/12 8:39:30.000 AM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
13/10/12 8:39:30.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
13/10/12 8:39:30.000 AM kernel[0]: rooting via boot-uuid from /chosen: D6807041-7128-30C2-9A2D-BFEEC3331CEE
13/10/12 8:39:30.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
13/10/12 8:39:30.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD SM768E Media/IOGUIDPartitionScheme/Customer@2
13/10/12 8:39:30.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 3
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 4020736 to: 10443264 (joffset 0x12ada000)
13/10/12 8:39:30.000 AM kernel[0]: BTCOEXIST off
13/10/12 8:39:30.000 AM kernel[0]: BRCM tunables:
13/10/12 8:39:30.000 AM kernel[0]: pullmode[1] txringsize[ 256] reapmin[   32] reapcount[ 128]
13/10/12 8:39:30.000 AM kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: examining extra transactions starting @ 10443264 / 0x9f5a00
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: Extra txn replay stopped @ 11364864 / 0xad6a00
13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
13/10/12 8:39:30.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
13/10/12 8:39:30.000 AM kernel[0]: Kernel is LP64
13/10/12 8:39:30.000 AM kernel[0]: hfs: Removed 27 orphaned / unlinked files and 2233 directories
13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
13/10/12 8:39:30.783 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
13/10/12 8:39:31.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:48:ea:41
13/10/12 8:39:31.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13/10/12 8:39:31.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
13/10/12 8:39:32.037 AM airportd[25]: _processDLILEvent: en0 attached (down)
13/10/12 8:39:32.000 AM kernel[0]: createVirtIf(): ifRole = 1
13/10/12 8:39:32.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802247e400
13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
13/10/12 8:39:32.000 AM kernel[0]: Created virtif 0xffffff802247e400 p2p0
13/10/12 8:39:32.080 AM com.apple.SecurityServer[15]: Session 100000 created
13/10/12 8:39:32.000 AM kernel[0]: AirPort: Link Down on en0. Reason 1 (Unspecified).
13/10/12 8:39:32.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:39:32.101 AM configd[17]: network changed.
13/10/12 8:39:32.103 AM configd[17]: setting hostname to "w00fa.local"
13/10/12 8:39:32.112 AM com.apple.SecurityServer[15]: Entering service
13/10/12 8:39:32.193 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
13/10/12 8:39:32.000 AM kernel[0]: Previous Shutdown Cause: 3
13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe
13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0097
13/10/12 8:39:32.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
13/10/12 8:39:32.000 AM kernel[0]: AGC: 3.2.11, HW version=3.2.19 [3.2.8], flags:0, features:20600
13/10/12 8:39:32.000 AM kernel[0]: NVDAGK100HAL loaded and registered.
13/10/12 8:39:32.586 AM fseventsd[144]: event logs in /.fseventsd out of sync with volume. destroying old logs. (87566 7 87588)
13/10/12 8:39:32.586 AM fseventsd[144]: log dir: /.fseventsd getting new uuid: A93F6A97-D1D4-4728-9B86-3AB73E58340C
13/10/12 8:39:32.599 AM mDNSResponder[146]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
13/10/12 8:39:32.645 AM systemkeychain[148]: done file: /var/run/systemkeychaincheck.done
13/10/12 8:39:32.652 AM configd[17]: network changed: DNS*
13/10/12 8:39:32.654 AM mDNSResponder[146]: D2D_IPC: Loaded
13/10/12 8:39:32.654 AM mDNSResponder[146]: D2DInitialize succeeded
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Mounted /dev/rdisk0s4 (Read-Write, label "BOOTCAMP", NTFS 3.1)
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,adaptiveuid,adaptivegid
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,allow_other,no nempty,relatime,fsname=/dev/disk0s4,volname=BOOTCAMP
13/10/12 8:39:33.000 AM kernel[0]: DSMOS has arrived
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
13/10/12 8:39:33.000 AM kernel[0]: Universal Audio Apollo - 4.0.0.13440 (x86_64) Mar 12 2012 20:19:07
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
13/10/12 8:39:33.000 AM kernel[0]: TUFS: starting (version 2012.4.17, x86_64 (10.6+), built Apr 17 2012, 11:40:41)
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: License: Valid.
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Ownership and permissions disabled, configuration type 1
13/10/12 8:39:33.301 AM fseventsd[144]: check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x10ee45528)
13/10/12 8:39:33.301 AM fseventsd[144]: log dir: /Volumes/BOOTCAMP/.fseventsd getting new uuid: C0009105-8F61-43E9-8563-1BB388632E71
13/10/12 8:39:33.393 AM hidd[540]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
13/10/12 8:39:33.409 AM kdc[538]: label: default
13/10/12 8:39:33.409 AM kdc[538]:           dbname: od:/Local/Default
13/10/12 8:39:33.409 AM kdc[538]:           mkey_file: /var/db/krb5kdc/m-key
13/10/12 8:39:33.409 AM kdc[538]:           acl_file: /var/db/krb5kdc/kadmind.acl
13/10/12 8:39:33.432 AM appleeventsd[545]: main: Starting up
13/10/12 8:39:33.435 AM kdc[538]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
13/10/12 8:39:33.451 AM com.apple.usbmuxd[518]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13/10/12 8:39:33.507 AM loginwindow[535]: Login Window Application Started
13/10/12 8:39:33.508 AM kdc[538]: KDC started
13/10/12 8:39:33.510 AM awacsd[549]: Starting awacsd connectivity-78 (Jul 26 2012 14:37:46)
13/10/12 8:39:33.512 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.513 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.000 AM kernel[0]: macx_swapon SUCCESS
13/10/12 8:39:33.513 AM awacsd[549]: InnerStore CopyAllZones: no info in Dynamic Store
13/10/12 8:39:33.520 AM aosnotifyd[552]: bootstrap_look_up failed (44e)
13/10/12 8:39:33.539 AM locationd[536]: NOTICE,Location icon should now be in state 0
13/10/12 8:39:33.539 AM locationd[536]: locationd was started after an unclean shutdown
13/10/12 8:39:33.611 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.613 AM coreservicesd[27]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
13/10/12 8:39:33.615 AM mds[532]: (Normal) FMW: FMW 0 0
13/10/12 8:39:33.619 AM WindowServer[567]: Server is starting up
13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 retained (2 references)
13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 released (1 references)
13/10/12 8:39:33.635 AM WindowServer[567]: Session 256 retained (2 references)
13/10/12 8:39:33.636 AM WindowServer[567]: init_page_flip: page flip mode is on
13/10/12 8:39:33.000 AM kernel[0]: en0: 802.11d country code set to 'US'.
13/10/12 8:39:33.000 AM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13/10/12 8:39:33.898 AM fseventsd[144]: Logging disabled completely for device:1: /Volumes/Recovery HD
13/10/12 8:39:34.000 AM kernel[0]: nspace-handler-set-snapshot-time: 1350110375
13/10/12 8:39:34.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:39:34.831 AM WindowServer[567]: mux_initialize: Mode is dynamic
13/10/12 8:39:34.847 AM WindowServer[567]: GLCompositor enabled for tile size [256 x 256]
13/10/12 8:39:34.847 AM WindowServer[567]: CGXGLInitMipMap: mip map mode is on
13/10/12 8:39:34.933 AM WindowServer[567]: WSMachineUsesNewStyleMirroring: true
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x5 for display 0x042803c0
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x6 for display 0x003f003f
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x7 for display 0x003f003e
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x8 for display 0x003f003d
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (1864, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (1865, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (1866, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
13/10/12 8:39:34.936 AM WindowServer[567]: CGXPerformInitialDisplayConfiguration
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(0, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[840 x 525], Rotation 0, Resolution 2
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1864,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1865,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1866,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]: CGXMuxBoot: Boot normal
13/10/12 8:39:34.998 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x00004733, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004d23, unit 4, caps QEX|QGL|MIPMAP, vram 580 MB
13/10/12 8:39:35.003 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
13/10/12 8:39:35.006 AM loginwindow[535]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13/10/12 8:39:35.014 AM hidd[540]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
13/10/12 8:39:35.050 AM WindowServer[567]: Unable to open IOHIDSystem (e00002bd)
13/10/12 8:39:35.092 AM WindowServer[567]: Created shield window 0x9 for display 0x042803c0
13/10/12 8:39:35.092 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:35.108 AM launchctl[585]: com.apple.findmymacmessenger: Already loaded
13/10/12 8:39:35.124 AM com.apple.SecurityServer[15]: Session 100005 created
13/10/12 8:39:35.146 AM hidd[540]: CGSShutdownServerConnections: Detaching application from window server
13/10/12 8:39:35.146 AM hidd[540]: CGSDisplayServerShutdown: Detaching display subsystem from window server
13/10/12 8:39:35.163 AM loginwindow[535]: Login Window Started Security Agent
13/10/12 8:39:35.223 AM SecurityAgent[594]: This is the first run
13/10/12 8:39:35.223 AM SecurityAgent[594]: MacBuddy was run = 0
13/10/12 8:39:35.249 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320 isBackBuffered: 1 numComp: 3 numDisp: 3
13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.280987 AM [AirPlay] Started browsing for _airplay._tcp.
13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.281405 AM [AirPlay] Started browsing for _raop._tcp.
13/10/12 8:39:35.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
13/10/12 8:39:35.965 AM UserEventAgent[587]: cannot find useragent 1102
13/10/12 8:39:36.935 AM WindowServer[567]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
13/10/12 8:39:36.955 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:36.965 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:37.000 AM kernel[0]: directed SSID scan fail
13/10/12 8:39:39.274 AM SecurityAgent[594]: User info context values set for w00fa
13/10/12 8:39:39.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:39:39.432 AM SecurityAgent[594]: Login Window login proceeding
13/10/12 8:39:39.618 AM loginwindow[535]: Login Window - Returned from Security Agent
13/10/12 8:39:39.631 AM loginwindow[535]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
13/10/12 8:39:39.657 AM loginwindow[535]: USER_PROCESS: 535 console
13/10/12 8:39:39.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
13/10/12 8:39:39.000 AM kernel[0]: AirPort: Link Up on en0
13/10/12 8:39:39.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
13/10/12 8:39:39.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: UserName
13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: GroupName
13/10/12 8:39:39.708 AM com.apple.launchd.peruser.501[610]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
13/10/12 8:39:39.712 AM loginwindow[535]: Connection with distnoted server was invalidated
13/10/12 8:39:39.717 AM distnoted[615]: # distnote server agent absolute time: 15.385943220   civil time: Sat Oct 13 08:39:39 2012   pid: 615 uid: 501 root: no
13/10/12 8:39:39.000 AM kernel[0]: AirPort: RSN handshake complete on en0
13/10/12 8:39:39.967 AM WindowServer[567]: Received display connect changed for display 0x42803c0
13/10/12 8:39:39.998 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320 isBackBuffered: 1 numComp: 3 numDisp: 3
Thanks!
-w00f

Similar Messages

Hello Apple Fix the display issue. MAcbooks suddenly stop detecting external display!!!

Bought another new minidisplay to HDMI and suddenly stopped detecting external display! However, it works randomly with no rhyme or reason. I have tried everything.

No answer

Display is all snow coming out of Sleep mode

Just replaced a 17" LCD (using the mini-DVI-to-VGA) with a new Acer 24" widescreen LCD (using mini-DVI-to-DVI). After a little fiddling with the profile, I've got a pretty nice picture. Problem: coming out of sleep mode, the screen is all snow. If I pop the monitor off and on, everything comes back normal. I did NOT have this problem with the older 17". This is more of an annoyance than a major issue, since just a couple of hits of the on-off button correct it. But it ain't right, so I'm hoping I can fix it for good. It happens whether the Mini goes to sleep by itself or if I put it to sleep. I don't know if it's a DVI issue, monitor issue, or something goofy with the Mini's video.
I did a search and found similar issues, but not exactly the same, and saw no suggested resolutions that fixed them. Any suggestions would be greatly appreciated!
Thanks ...
Ed

The 9400M device driver on our Macs appears to be really bad.
My buddy tried to put a Sharp LCD projector on the external port on his Mac laptop, which also had a Nvidia 9400M, and it was not usable. The picture kept coming and going. The projector screen would go blank, then a picture would come up, go blank, and then the picture would come back again, over and over. Being an experienced Mac, PC, and Linux user, I attempted to help him get it working using the display properties page in the System Preferences. Nothing helped.
I'm having similar troubles with the second port on my 9400M on my new Mac mini.
The primary display is fine. I have a 24" Acer LCD on the miniport to DVI converter for my second display, and it works most of the time, however the picture goes to snow fairly often, and blacks out sometimes, too. It usually comes back. Occasionally, I have to power cycle the LCD to get the picture back.
Seeing similar problems with two different DVI display devices, when these devices work fine on our PCs, seems to point the problem at the Mac Nvidia display driver.

Windows 7 Sleep issues--freezes after coming out of sleep

Running Windows 7 rig with MSI MS-7511 Mobo. Back in October, I purchased a refurb Microsoft Wireless 6000 keyboard and installed it. I THINK this is what started my problems. Since then, computer will go into sleep mode as usual, but at some point after coming out of sleep (maybe a few seconds, maybe an hour) it will totally freeze. The only way to get the system back up is to unplug it and re-start.
I have since uninstalled the keyboard, and tried to restore, but still having the problem. Pretty sure it's a USB problem, but I have tried re-installing drivers (mcp732) and even the MB BIOS. If I run the system without my wireless mouse and with no USB devices, it works fine. I have also tried switching USB devices to different ports, to no avail.
It's not just the mouse that causes the issues, it seems to be any connected USB device.
Also--and I think this is weird-I installed a PCI USB card in one of the slots and transferred my mouse to that and the same thing still happens. Wouldn't that be a totally different set of drivers than the ones that drive the main MB USB devices?
Don't know what to try next . . . want to avoid having to do a Windows re-install if possible.
Below are the errors I get when I run powercfg -ENERGY.
Any ideas? Would like to avoid giving away another two days of my life re-installing my software.
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name   USB Root Hub
Host Controller ID   PCI\VEN_10DE&DEV_077E
Host Controller Location   PCI bus 0, device 4, function 1
Device ID   USB\VID_10DE&PID_077E
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name   USB Root Hub
Host Controller ID   PCI\VEN_10DE&DEV_077B
Host Controller Location   PCI bus 0, device 2, function 0
Device ID   USB\VID_10DE&PID_077B
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name   Microsoft Hardware USB Wireless Mouse
Host Controller ID   PCI\VEN_10DE&DEV_077B
Host Controller Location   PCI bus 0, device 2, function 0
Device ID   USB\VID_045E&PID_00E1
Port Path   5
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name   USB Mass Storage Device
Host Controller ID   PCI\VEN_10DE&DEV_077E
Host Controller Location   PCI bus 0, device 4, function 1
Device ID   USB\VID_0781&PID_5406
Port Path   3

Quote from: itsallpoo on 04-March-11, 07:46:27
I don't think I've had a setup yet where sleepmode wasn't causing issues, I shut it off.
Sleep has only become an issue with Windows 7, where MS got so aggressive about it, and caused so many problems for so many people, that many have done as you and turned it off! Shame on you Microsoft! Instead of saving energy your customers are leaving their PCs on!
I suspect the OP's problem is with (of all things) the MS wireless mouse/kb driver(s). At first my setup wouldn't work at all, then I dl'ed the newest Intellimouse drivers/software and it worked "better", but I have never been able to get Sleep to work reliably. I finally found that Hibernate works reliably, so that is all I do now. When the PC is done working, it saves to HDD and shuts off. Resuming from this state takes longer than resuming from Sleep, but at least it Works Every Time.

Apple app windows disappear after coming out of sleep

In Yosemite, after coming out of sleep, some Apple apps are still active but the windows have disappeared. I have noticed this with the Activity Monitor and with the Calculator. I played around with Hide/Show Windows, etc and was finally able to make the Activity Monitor window show up. I was unable to get the window to show up in the Calculator. Killing and restarting the app resolved the issue.
I have not had any problems with non-Apple apps, and Finder and Safari seem to be OK.

Further correction: Even when initially launched, after a restart Activity Monitor and Settings will both launch with no windows. There is a window name shown when right clicking on the icon in the Dock and in the application menu, but clicking on the window does not bring it up for display. With no Activity Monitor, you have to use command line, ps command and kill to clear the processes, following which they can be relaunched with all windows displayed.

Cannot Connect to AE After Coming out of Sleep Mode

This happens on both my iMac and Powerbook. I don't normally use wireless on the iMac but I discovered that both computers are having the same issue when troubleshooting. When coming out of Sleep mode, the Airport device cannot connect to the Airport Express. The only thing that can consistently connect is my Blackberry.
I know it's not a reception problem as when I am able to connect, the signal is strong and speeds are very good.
Some things I have tried to fix the problem have worked but not consistently as the problem keeps happening:
-Turn Airport off and back on (On the computer)
-Unplug and plug back in the AE
-Turn off MAC Address Filtering
-Factory reset the Airport Express
-Select the Join Other Network option and re-enter my wpa2 credentials
-Uncheck Closed Network option
What could be the problem? I'm really thinking there is a software bug somewhere. I have also noticed if I make any changes in the Airport Utility the AE never recovers as it stays a solid amber. I have to power cycle the device.
It's using software version 6.3 and all my OS X updates are the latest. This is very frustrating. Any help appreciated.

I have tried both remedies mentioned above. I double-checked and my network is listed in the wireless advanced settings. It's the only network in my list. Airport is at the top in my Network Preferences as well.
I was hoping the update to 10.5.8 would help but the problem keeps occurring. One thing I have tried is leaving the "Closed Network Option" unchecked for my AE. Now, I am discovering when exiting sleep mode, I see my network but when it tries to connect, I receive the error "Connection Timeout". This happens on both computers.
The only thing that works the most consistently is unplugging the AE and plugging back in. Once I'm connected, it works great.
I tried using iStumbler to see if there were any other networks using the same channel but that looks okay.
I guess I can try using a different security setting other than WPA2, but then that is not really a solution. I'm about ready to just try some other newer wireless solution. It used to work flawlessly. I think until 10.5.4, I had no issues.

Locked out of machine after coming out of sleep mode (passwd not accepted)

info macbook (intel) 10.5.1 (was upgraded from Tiger)
single user setup
after waking up machine or coming out of sleep mode (i.e lifting lid) occasionally cannot login at all, password is refused. Multiple failed attempts. Its not a problem of caps lock on.
Only solution is to force power down of machine and then OS comes back up, HOWEVER, without demanding a password after power up (hardly very secure), afterwards it may work OK for a few days (with a number of sleep cycles) before same login problem happens again.
Is this a known problem?

Please do both of the following:
1) Turn the computer off. Press and hold shift. Turn the computer on. Continue to hold shift until you see the spinning gear below the Apple logo. Once it is started up, log in. Does it do the same thing here? If it works, please know this is not a fix, just an isolation step.
2) Test this in another user account on the computer. If you don't have one, create one in: Apple menu> System Preferences> Accounts. Click the lock in the lower left corner if it is locked and enter your password. Click the + just above the lock and type in "test" for all the fields it asks for. If you are on 10.4 or earlier, check off "Allow user to administer this computer". If you are on Leopard, make the account type an Administrator. Click "Create account". Click the Apple menu and select the last item ("Log Out" Account name). Log in as the test account and test. Note: You will have to set it to ask you for a password when waking from sleep (Apple> System Prefernces> Security> Require password to wake this computer from sleep or screen saver)
Let me know the result of those tests. Please make sure to try both, as they will allow me to see what may be causing the issue.

Mid 2010 Macbook Pro sleep and external display problem

I recently upgraded to the new 2010 15 inch core i7 Macbook Pro. The problem i have is that it will not detect an external display (23inch Cinema) after waking from sleep. This happens after using the display to extend the desktop and also when using the Macbook in closed mode.
I've managed to get it to detect the display only after either restarting the Macbook completely or by going into energy saver and switching to dedicated graphics then going back to detect display.
It seems that when on integrated graphics it doesn't register that an external display is connected. If i leave a program open and running that causes the dedicated graphics to kick in then it works ok. If i close all programs, shut the macbook pros lid, computer sleeps and external display shuts off. If i click the mouse to wake with lid closed, apple logo lights, machine starts up few seconds later macbook returns to sleep. If i open the screen the machine wakes as normal but the external monitor doesn't.
Any help is much appreciated as its starting to frustrate me now...
Many thanks
oh and im running OSX 10.6.3

I thought it was intermittent to begin with until i started looking into it. By leaving programs open, like aperture, before i put the machine to sleep it appears to wake the external monitor up without a problem. If i shut all programs or leave basic things open like safari and mail which don't require the dedicated graphics, then upon wake it wont register an external screen is connected.
Manually detecting displays in settings doesn't work.
Disconnecting and reconnecting mini display port doesn't work.
Turning off power to cinema display and powering back up doesn't work.
To get the display going again its either 1) turn off macbook pro and re-boot or 2) re-start the machine then the display is automatically recognised. Or 3) launch a programme that kicks in dedicated graphics then manually go in and detect displays again..... like magic the display then springs to life.
No ideas anyone??

My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?

My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. The screen goes gray, sometime out. Have to press power button to get screen on. Problem stops.

Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. It will flicker, the screen goes gray, sometime out. Have to press power button to get screen on. Problem stops. Getting more frequent. After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5

See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Why does my MAC sometimes crash when coming out of sleep mode?

My mac freezea sometimes when coming out of sleep mode, and occasionally the screen will go black. At other times I will be using the MAC and it will just freeze. The only way to get out of it is to kill power and reboot. It seems to be happening more frequently.
It was suggested that I fix permissions and start in sleep mode. This has helped in the past, and I am going to do it again now. I also recently upgraded to 10.6.8, and after that the crashes were fewer, but now they are increasing again.
I am including a log of the recent crash a few minutes ago.
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:15 AM com.apple.launchd.peruser.501[94] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/23/11 11:41:23 AM com.apple.launchd.peruser.501[94] (com.apple.Kerberos.renew.plist[116]) Exited with exit code: 1
12/23/11 11:41:34 AM com.apple.WindowServer[71] Fri Dec 23 11:41:34 Macintosh.local WindowServer[71] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory

Okay thanks, but I am a newbie who is not a very tech kind of a person. The only periphals I have are a kodak camera dock, a Canon 310 copier/fax/scanner and a pair of altec speakers. How do I determine if they all have drivers for my MAC? They all seem to work okay, if that is a sign, though the Kodak camera Dock is a bit slow. How also do I determine if they are Apple energy compatible? With each of these peripherals, do I simply disconnect them from my MAC one at a time to see if there improvement?

Airport doesn't locate my network after coming out of sleep mode

Hi, seems that my imac has a hard time connecting with my network when coming out of sleep mode. Even when I choose the proper network, it still asks for my password (even thought it's populated in teh password field) and when I choose OK, it still times out quite often. Eventually if I turn it off and on or restart comp, it comes up OK.
I'm a little afraid to repair permissions as I have a HP C7280 all in one that the general school of thought is don't repair permissions as Leopard thinks they need repair, but in fact are OK and when "repaired" stop the machine from working properly. It took me a while to get it going in the first place, I dont want to break it again! Any ideas?? Thanks, Dan

Apple Store currently thinks it's a hardware problem

EMac Pinwheels about 2 mins after coming out of sleep

Computer Pinwheels about 2 mins after coming out of sleep and will not recover. Have to turn it off and back on. eMac 1GHz 3rd gen 1.5GB RAM

Hi Leo,
Open console in Applications>Utilities, check the system log for the date/time of the last sleep/wake problem & the Startup right after that for clues.

Why does my Mac Pro open to a fuzzy screen when coming out of sleep mode?

Why does my Mac Pro open to a static-filled screen when coming out of sleep mode?

But does it then come fully awake? My MB Pro comes on with out of focus screen as if in a fog but once it comes awake it clears up, there is a progress bar at the bottom showing the progress from sleep

E9220y hangs when coming out of sleep mode

My new HP Elite e9220y hangs when coming out of sleep mode- When I 'touch a key' or move mouse, power switch on computer turns from yellow to blue, but monitor remains black. Have to force off, and restart. Adjusted power management to 'never' sleep but I was hoping for a more elegant solution.

Quote
Originally posted by southmike
but i would try the settings i used in my psu/sleep thread.
https://forum-en.msi.com/index.php?threadid=43603&sid=
it fixed my hang problems and even got my lights to sleep properly
Southmike, I'm glad I could help you out. When I tried using the settings you stated, it didn't help me resume from standby. However, I did finally get standby to work by first resetting the BIOS to default, and then setting the Power Management to:
ACPI Standby: S3
Call VGA BIOS (no idea what this is): Enable
USB Wakeup: Enable
Power Management/APM: Disable
And, I also disabled a few other things I dont use like onboard Audio and RAID and voila, now WinXP can go into standby and resume from it piece of cake.

Display issue coming out of sleep (w/ external display)

Similar Messages

Maybe you are looking for